Single form access

Hi Guyz,
I have created my own tool bar and menu bar and have display filed DIS_FLAG Y/N when user login DIS_FLAG display YES/NO i use the below code on WNFI
:CAN_BLK.DIS_FLAG:='Y';
:GLOBAL.FLAG:=:CAN_BLK.DIS_FLAG;and in menu item on employee form i put the below code.
IF :GLOBAL.FLAG='N' THEN
     ALERT_MESSAGES('Cannot run multipel forms at one time');
     RAISE FORM_TRIGGER_FAILURE;
ELSIF
     :GLOBAL.FLAG='Y' THEN
                NEW_FORM('EMPLOYEE');
END IF;but when i create the new record on employee form global.flag will be come blank and it will not show Y/N and when user open the another form it will not through the above alert message any one help me to resolve this error? the user will not open the another form untill it close the first form and on exit it global.flag will become Y
ON KEY-EXIT TRIGGER.
IF :GLOBAL.FLAG='N' THEN
     EXIT_FORM;
ELSIF
     :GLOBAL.FLAG='Y' THEN
     NEW_FORM('ESTART');
END IF;I'm using forms 6i. oracle 9i.
Thanks in advance & Waiting for the replies
Edited by: Moazam Shareef on Nov 19, 2011 1:58 AM

Hi
Even if you created a form pagination process, you need to "initialise" the PK field(s) -- by default, they are null and the pagination buttons will not show (this is very different from how access works).
You can do it using a conditional computation (e.g. selecting the min PK value when the PK field is null).
I hope this helps.
Luis

Similar Messages

Single Client Access Name for Weblogic Forms and Reports.

I have a 2 node clustered system:
Windows 2008 R2 64-bit
Weblogic 10.3.3 (on each node)
Weblogic Forms and Reports 11.1.1.3 (on each node)
Database 11gR2 RAC 11.2.0.1 (on each node)
The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
Thanks.

Dear,
Did you find an answer to your question back in 2009?
We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
Geert

Replicating MS Access single form record selectors functionality

I am very new to APEX.
I would like to rebuild and improve on all our departments MS Access userforms using APEX.
At the moment I am trying to replicate the standard MS Access "single form" view of a record in a database table, with the record selector navigation buttons (prev, next, new record).
I have scoured the internet and this forum but have not successfully found the solution.
I need to be able to select a subset of records from a view/table and present them on a page one at a time, so the user can scroll through them (prev, next) and make edits. Because of the amount of info in each record, the whole screen will be taken up by each record (hence the single form view).
I have created a form pagination process that is supposed to get the next/previous primary key value, however I can't seem to get the buttons displayed on the form that should be firing off these processes.
What combination of features should I be using to replicate this functionality? I am using the "Form on a table/view" style page at the moment.
Cheers,
Richard.

Hi
Even if you created a form pagination process, you need to "initialise" the PK field(s) -- by default, they are null and the pagination buttons will not show (this is very different from how access works).
You can do it using a conditional computation (e.g. selecting the min PK value when the PK field is null).
I hope this helps.
Luis

Multiple DataBase Connection in a Single Form

hi all
Is it Possible to have Multiple Database Connection With a Single Form
Block a : Retriving data from a database Service a/Schema A.
Block b : Retriving data from a Remote Database Service b / Schema B.
If yes how to do this.
regards
jai
email:[email protected]

Sure you can access a database this way,
but can you base a block on this database connect? No you can't.
Frank

Every single form of media stops on iPhone 4

Guys, heres my prob. The phone i have is an iPhone GSM 4 running 4.3.5, and just today morning, every single form of media (songs on iPod, on other music apps, videos on youtube, even taptap revenge) have this problem where if i play it, they will play for 2 seconds, and then stops. For videos, they will play and load normally for 2 seconds or 3 seconds, the the video will stop and all loaded content (the white line at the tip which means that those parts of the video is loaded) will dissapear, and when i press play again, the video will play for another 2 seconds. Same for other download apps (idownload) and games (taptap). I read a lot of forums and many people have the problem where their music stops playing randomly, but all my music just stops like 2-3 seconds after i play it. And headphones arent a problem since i tried with and without them. Also the problem occurred suddenly, as i was watching youtube just before the videos stopped 2 seconds after playing. This is very frustrating. Anyone with similiar problems and know how to solve this?? Soooooo many thanks guys.

Hi taroli,
Where exactly are you getting the error message about the access rights & do you have the exact message that appears? Is it an iTunes error when you're trying to sync the data over?
The above would help isolate exactly where the issue is, would make sure you update iTunes and try another PC if possible. However if the issue is software related from the iOS then there will be no direct way to get all of that data across as any corruption would be saved in the backup file from the old phone, you would be able to sync content to the PC then sync it to the new phone however.
Here's a link to see exactly what backups contain and what's not stored there so you know what data you can preserve if the issue is iPhone related: http://support.apple.com/kb/HT1766
Hope this helps.

Multiple Selects in a single form

I have six select boxes and I want them in a single form.
Below are the outputs for the select boxes.
<cfform
action="Resolution_History.cfm?year=#year#&sessiontype=#sessiontype#&btype=res"
name="form">
<select name="SRINPUT">
<option value="">SR
<CFOUTPUT Query="findSR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HRINPUT">
<option value="">HR
<CFOUTPUT Query="findHR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SCRINPUT">
<option value="">SCR
<CFOUTPUT Query="findSCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<br>
<select name="HCRINPUT">
<option value="">HCR
<CFOUTPUT Query="findHCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SJRINPUT">
<option value="">SJR
<CFOUTPUT Query="findSJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HJRINPUT">
<option value="">HJR
<CFOUTPUT Query="findHJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<INPUT TYPE="Submit" VALUE="Submit" alt="submit
button">
</cfform>
Once a user selects a number it will send them to an action
page. On the action page I need the below IF statement to work so
it will set the variables. It isn't working at this time. Its not
bringing the values of billnumber, houseorig or the billtype.
Does anyone have any thoughts? I know it is close to working
and I need to set all of the inputs to input4 to generate my
queries so I don't have to duplicate them.
<cfif form.srinput gt "0">
<cfset s = '#houseorig#'>
<cfset r = '#billtype#'>
<cfset input4 = '#srinput#'>
<cfelseif form.hrinput gt "0">
<cfset h = '#houseorig#'>
<cfset r = '#billtype#'>
<cfset input4 = '#hrinput#'>
<cfelseif form.scrinput gt "0">
<cfset s = '#houseorig#'>
<cfset cr = '#billtype#'>
<cfset input4 = '#scrinput#'>
<cfelseif form.hcrinput gt "0">
<cfset h = '#houseorig#'>
<cfset cr = '#billtype#'>
<cfset input4 = '#hcrinput#'>
<cfelseif form.sjrinput gt "0">
<cfset s = '#houseorig#'>
<cfset jr = '#billtype#'>
<cfset input4 = '#sjrinput#'>
<cfelse>
<cfset h = '#houseorig#'>
<cfset jr = '#billtype#'>
<cfset input4 = '#hjrinput#'>
</cfif>

give'em a break. he is probably under pressure (like we all
have been). in response, i do not even see some of the variables
you are checking in the second script in the first. get this one
straight and i think it'll work.

How do I allow all users on a single computer access to music without duplicating songs?

There has got to be a way to allow all users on a single computer access to a single -shared- directory without DUPLICATING the songs, but I can't figure it out. Tried Edit | Preferences | Advanced | Change, but the songs do not show up. Tried Sharing the folders. Tried Public Folders. Just want all my songs in one place to save space, prevent duplicates. Please advise.

Move the iTunes folder from its current location to, say, C:\iTunes.
With each account in turn press and hold down shift and click the icon to start iTunes, keep holding until asked to Choose or create a library.
Choose the library at C:\iTunes, or wherever you put it.
Job done.
tt2

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

How to running a single form on the browser

Hi below is the link for deployment of our application on app server.
http://100.180.127.225:7779/forms90/f90servlet?config=abc
and this is the entries in formsweb.cfg file.
[abc]
form=G:\Oracle10gBinaries\abc\FMX\test.fmx
otherparams=prm_init_file=G:\abc.INI prm_itype=0 prm_impli_type=9W prm_debug_mode=NO
pageTitle=Heading
envFile=abc.env
separateFrame=TRUE
lookAndFeel=generic
archive_jini=f90all_jinit.jar
imagebase=codebase
Now i want to run a form named test2.fmx directly by passing the value as *test2.fmx on the browser.
what change i needs make in the formsweb file to achieve this.

Hi all thanks for ur help.
i am able to run the .fmx directly .this i have achieved by putting the .fmx in the forms90 folder and using the link.
http://100.180.127.225:7779/forms90/f90servlet?form=test2.fmx
it is working fine and showing the single form but now i want to pass a parameter
from the link to the test2.fmx directly/
when launched from the link ,test2.fmx shows all the records. as this form contains customer information so it list all the customer no.
i want to launch this form with only the customer id passed thro the link.
i am trying something like
http://100.180.127.225:7779/forms90/f90servlet?.fmx&PRM_CUST_NO=000000014
where 000000014 is the customer no.
when launch the forms it still gives all records and not this customer record.
prm_cust_no is the oracle form parameter which is defined in the form.
please suggest?

Mutiple Canvases Single form

Hi,
I'm facing a problem of having multiple canvases(3) in single form.
I've two Data blocks(Master & Detail). Master having one canvas. But details have two different canvases.
I've created 3 different menus for 3 canvases.
say Master,Detail1,Detail2. Now the problem is when i try to open detail1 or detail2 from oracle apps menu it opens master canvas only.
i've created functions in apps & in NEW_FORM_INSTANCE trigger coded like
If (fnd_function.current_form_function = 'CRM_FC_PPC') then
GO_BLOCK('CRM_CUSTO_FORCAST_DET');
SHOW_VIEW('PPC');
HIDE_VIEW('CUST_FORECAST');
HIDE_VIEW('SHIPPING');
Elsif (fnd_function.current_form_function = 'CRM_FC_SHIP') then
SHOW_VIEW('SHIPPING');
HIDE_VIEW('PPC');
HIDE_VIEW('CUST_FORECAST');
Else
SHOW_VIEW('CUST_FORECAST');
HIDE_VIEW('PPC');
HIDE_VIEW('SHIPPING');
Go_item('CRM_CUST_FORCAST_HDR.CUSTOMER_ID');also my master canvas is Content & details are stacked. should i create different windows for details canvases ? i also did that but failed.
what could be the solution here ?
Forms 6i
DB 9.2
Regards

Hi,
Sorry for delayed reply.
Francois,
I've tried with go_item but it doesn't worked. i knew it & tried it before asking here. but thanks anyway.
Ahmed,
i've only one window show all these canvases.I'm now trying with multiple windows.
The code is as follow
If (fnd_function.current_form_function = 'IRS_CRM_FC_PPC') then
     GO_ITEM('IRS_CRM_CUSTO_FORCAST_DET.CUSTOMER_ID');
Set_window_property('CF_PPC',VISIBLE,PROPERTY_TRUE);
Set_window_property('MAIN',VISIBLE,PROPERTY_FALSE);
Set_window_property('CF_PPC',TITLE,'IRS CRM PPC Details'||:global.div);
GO_BLOCK('IRS_CRM_CUSTO_FORCAST_DET');
SHOW_VIEW('PPC');
HIDE_VIEW('CUST_FORECAST');
HIDE_VIEW('SHIPPING');
Elsif (fnd_function.current_form_function = 'IRS_CRM_FC_SHIP') then
SHOW_VIEW('SHIPPING');
HIDE_VIEW('PPC');
HIDE_VIEW('CUST_FORECAST');
Else
SHOW_VIEW('CUST_FORECAST');
HIDE_VIEW('PPC');
HIDE_VIEW('SHIPPING');
Go_item('IRS_CRM_CUST_FORCAST_HDR.CUSTOMER_ID');Regards
PS. Master is Content & details are stacked.
Edited by: user10569054 on Apr 5, 2010 3:10 PM edited for canvas details

MULTIPLE SESSIONS IN SINGLE FORM

HELLO ALL
HOW CAN I HAVE MULTIPLE SESSIONS IN A SINGLE FORM? MY REQUIRMENT
IS SUCH THAT I HAVE A CONTROL BLOCK WHICH IS MARKED AS UPDATED
WHEN USER PRESS COMMIT BUTTON, BUT I WANT TO ROLL IT BACK AND I
HAVE ISSUED SOME UPDATE COMMANDS MYSELF WHICH I WANT TO BE
COMMITED. ANYONE HAVE ANY IDEA?
THANKS IN ADVANCE

Give the submit button a name. It will be sent as well, so you can see it in the request variables.

Multiple submit on single form

hi all,
My current system have 1 submit button with single form. This submit button will call file_content.upload.
htp.p('function on_submit() {');
htp.p('     ...the rest of my code here..');
htp.p('     document.forms[0].submit();');
htp.p('     return true;');
htp.p('}');
htp.p('<form enctype="multipart/form-data" method="post" action="file_content.upload">');
htp.p('     ...the rest of my code here..');
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()"></form>');My question is, i want to enhance this by adding additional 1 submit button with value "Save". But this new "Save" button will call/trigger different file. This new button will call file_content.update. How to accomplish this and how to differentiate these 2 button?
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()">
          <input type="button" id="btn_Save" value="Save"></form>');Appreciate any help from you guys. Thanks
Edited by: morezack on Jul 21, 2011 2:08 PM

You again did accident like one below
multiple submit button on a single form
Take care..
Regards,

Can you have a pdf as an icon for single click access on ipad or iphone?

can you have a pdf as an icon for single click access on ipad or iphone?

No - I think Safari is the only app that can have separate shortcuts (for different sites) on the homescreens. You can only access PDFs by first going into it's owning app.

Multiple submit button on a single form

hi all,
My current system have 1 submit button with single form. This submit button will call file_content.upload.
htp.p('function on_submit() {');
htp.p('     ...the rest of my code here..');
htp.p('     document.forms[0].submit();');
htp.p('     return true;');
htp.p('}');
htp.p('<form enctype="multipart/form-data" method="post" action="file_content.upload">');
htp.p('     ...the rest of my code here..');
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()"></form>');
My question is, i want to enhance this by adding additional 1 submit button with value "Save". But this new "Save" button will call/trigger different file. This new button will call file_content.update. How to accomplish this and how to differentiate these 2 button?
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()">
<input type="button" id="btn_Save" value="Save"></form>');
Appreciate any help from you guys. Thanks
Edited by: morezack on Jul 20, 2011 8:21 PM
Edited by: morezack on Jul 20, 2011 8:29 PM

PLEASE IGNORE THIS THREAD. ACCIDENTLY SUBMIT IT. I WANT TO DELETE THIS BUT CANNOT

Creating vecor art from a single form field.

How do I create vector art from a single form field within a pdf that has serveral form fields in it?
Thanks
Chris

I need to create vector art from text within one form field on a page with several form fields on it.
1- single form field
2- create vector art from text within the single form field mentioned above
3- if possible export to a file
4- if not possible how can I create vector art from a pdf automatically?
5- if possible, create a button that will allow users to create vector art from text in a single form field
Thank you,
Chris

Single form access

Similar Messages

Maybe you are looking for