Single frame disappears when compressing with de-interlacing turned on

I'm having trouble with a single frame - showing a lightning flash - disappearing after compression. I've found I need to turn on de-interlacing in the Inspector to avoid bad problems with the interlacing showing on edges when panning sidewards, but since I've turned de-interlacing on, this one frame disappears.
I've tried making it a freeze-frame, held for several seconds. I've tried slowly zooming in on the same frame for several seconds. I've tried putting in compression markers all over it. In all cases, the lightning flash is there in Final Cut Pro, but disappears on compression.
Any suggestions?

I dont have the answer, but rather a similair problem. If you don't mind I will add it to your blog here so hopefully someone can answer both our problems with one solution.
I have been compressing the same FCP sequence several times making only small changes to my sequence each time(adding and deleting certain photos per clients request). Now all of a sudden, one on the photos simply does not show up after being compressed. It renders just fine in FCP and exports to Compressor just fine, but after I compress it, when I play it, the two seconds of the sequence that is supposed to show a certain picture, it is just black.

Similar Messages

  • SSL indicator disappears when page with video tag has been loaded

    I have a strange bug in Firefox, that was detected when site moved to SSL.
    There is single page site built on Backbone.
    When page with video tag loaded SSL indicator disappears.
    Firebug shows that Firefox create GET request connection to the server but it hangs.
    All site logic work correctly. And video on this page works perfect, I can click play and new connection will be created and video played but first connection still hangs.
    There is four page with video tag (four steps of wizard) and hanged connection appears randomly on this pages.
    Actually this issue exists without SSL, but detected only when we moved to SSL and lock icon began to disappear.

    The SSL indicator can disappear if there is mixed content on that page (i.e. coming via an unencrypted http connection).
    Did you click the Site Identity Button (globe/padlock) and proceeded to the Security tab in Page Info?
    *https://developer.mozilla.org/en/Security/MixedContent
    *https://developer.mozilla.org/en/Tools/Web_Console

  • Keyboard disappears when dictating with Siri

    It sometimes happens when dictating with Siri on my iPhone 4S, that the keyboard completely disappears. I then cannot hit the "Done." button and have to restart the application. It happens once in awhile, and I do not recognise any reason. It already happened with the Mail app, Messaging, WhatsApp, and others.
    Do you also have experienced anything like that?
    Have you any solutions to solve this?
    May it be general software error?
    Here is a screenshot: https://skydrive.live.com/redir?resid=25D497D0E71E703F!420&authkey=!AMf9W3bvLaSM vdM

    Sorry for the trouble you're having. I personally contacted the manufacturer (HTC), and learned that since your keyboard is not displaying in landscape mode (as opposed to simply not rotating), there are a couple of things we can try. First: 
     - Tap Menu>Settings>Apps>Manage Apps> Choose Touch Input >Clear Data>Force Stop.
    If this does not resolve the matter, please perform a factory reset. Please be sure to backup important data you have on the phone before taking these steps: 
     - Tap Menu>Settings>SD&Phone Storage>Factory Data Reset>Reset Phone>Erase Everything
    When your phone reboots and you log into your Gmail account, the apps you had will be restored. 
    In the event this does not resolve the matter, your phone may be in need of replacement. 
    Thanks, 

  • Creating item in shared calendar- it disappears when syncs with icloud!

    This has been going on for weeks.  When I create a new event on a shared calendar, the edit window closes and I see my appointment listed correctly.  A few moments later, as the "updating..." line appears at the top of the screen, the event's title and time disappears and it reverts to my default calendar at a random time during the day (same date).  I could create 10 events and the moment it tries to sync to iCloud, they are all GONE!  Anyone else notice this from a shared calendar?  FWIW- it doesn't do this when I schedule directly on icloud.com, but I find the interface to be a pain in the neck to use regularly.  All suggestions welcome.
    Thanks!

    To change your iCloud ID you have to delete the account, then sign in with the alternate ID.  Before doing this, if you want to keep your data and move it to the new account, go to Settings>iCloud and turn each of your synced data to Off, and when prompted choose to keep the data on your iPhone.  When everything is turned off, scroll to the bottom and tap Delete Account, the sign back in with your other account ID and turn syncing back on; when prompted, choose merge.
    If all your data is already in your other account then you don't need to do this.  Just delete the account from your phone, selected not to keep the data, then sign into the new account, turn on data syncing and if prompted, choose merge.

  • Muse 7.0: parallax elements disappear when combined with a glow

    Hi there,
    I have a bug: parallax scrolling images do not show anymore after a glow is added. I have tried in Safari, Chrome, FF - all the same, they are also not shown in the preview of Muse either.
    The images are psd (two states, one regular and one hover) and the have a scrolling effect, moving from the left into the screen. Once I add a glow to the images, they disappear completely.
    What could this be, any ideas?
    Best,
    bartl

    Hi Barti,
    I see this bug you're pointing out. It appears that as soon as the objects are completely off the screen, they do not want to come back on the screen. When I start the psds on the screen they appear, but as soon as I scroll down they disappear until I reload the page. I'm sorry for the hassle this has caused, but there is a workaround until we can get this bug fixed for you.
    1. Drag out a states button and delete the preset rectangle and text frame.
    2. Place both images onto the state button and style them as you want.
    3. For the image you want to appear only in Rollover state, change its opacity (now in normal state) to be 0.
    4. Change the state button to show Rollover state.
    5. Set the image you want to only appear in Normal state to have opacity 0.
    6. Set the image you want to only appear in Rollover state to have opacity 100.
    If the images are right on top of each other the layers panel will help out in selecting the correct image when one has no opacity or they're stacked. This will also cause the mousedown state to have the rollover state's image, but that can be changed by selecting the mousedown state and changing the image opacities.
    Dana

  • Username disappear when login with saved user credentials

    hi,
    I am trying to login to a SSL enabled site; I have already stored my username password with FF.
    but when I try to login here what happens.
    * Typing my username and select the same from the dropdown.
    * once I click on the username
    * password field filled and the username disappears.
    Do you have any soulition for this?
    Regards,
    Bromount.

    Does this happen on all pages where you try to login and have an name and password saved?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Purchased ringtone disappeared when syncing with iTunes

    I purchased a ringtone using iTunes store on my iPhone and was able to enjoy it for a day before I synced the iPhone with iTunes on my computer. A Window appeared stating "[the ringtone] was not copied to iPhone because you are not authorized to play it on this computer". So now the ringtone is visible in iTunes, but it disappeared from the iPhone... and it annoys me because I paid for the ringtone...!
    My question is: how do I get the ringtone back on my iPhone?!

    I had done all of that to no avail.  I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again.  I had tried switching the USB port at the front of the machine but that had not helped.  Everything is good to go again.  thanks for  your reply

  • User library has disappeared when viewing with finder

    I saved a Pages file as a template and it saved it in user/library/application support/iwork/templates/my templates. When I try to follow this path with Finder there is no library folder under my user name.
    Any ideas?

    Thanks from me too.
    After noticing it missing in the finder, I checked the terminal and found the ~Library where it should be. Thought I'd check to see if anyone else was missing it, and if it could/should be made visible; but why the "@"?  I thought that stood for symbolic link.

  • Purchased app on iPhone - disappeared when synced with itunes

    I purchased an app on my phone a couple weeks ago. Today I synced with iTunes on my PC and the app disappeared from my phone and does not appear in the list of apps in iTunes. "Check for available downloads" in iTunes said that I had no available downloads. The purchase of the app did show up in my purchase history, but that seemed to be the only place.
    I was able to get the app back by attempting to purchase it again, at which point iTunes allowed me to download it again for free. However, all of the application data is still gone. And since I synced more than once in this process, the initial iPhone backup (which should have contained all that was lost) has now been overwritten.
    This has happened to me several times before, but this is the first time where the application data has been important.
    Any ideas as to what went wrong?
    Is there any hope for me to recover my application data at this point?
    Any way for me to prevent this happening again? (short of never syncing...)

    I doubt very much that you can recover the data at this point. The safe way to do things (I found for me at least) is download apps initially via iTunes instead of your phone, then mark them for syncing and do the normal sync. I purchased all of my apps this way and sync several times a week with no problem. I also do all the app updates thru iTunes.

  • "Invisible" status , disappeared  when used with Jabber or Bonjour ?

    Does anyone know if the "Invisible" status option is available in Jabber ? cause it's just not there.
    could it be available only in AIM accounts ?
    thanks.

    Only AIM accounts. (in iChat)
    There are reports that some Jabber Clients can do Invisibility but they have not put it in to iChat yet.
    7:27 PM Wednesday; November 7, 2007

  • MacBook Pro 2012 hinge problem with single click sound when i open it

    when i go to sleep and shut my macbook off and close the screen next morning i open my screen and i hear a single click noise??
    im paranoid ita a brand new macbook its not a hard drive fail it just a single click sound when i open it to turn on
    and heres a video of the hinge is this is whats causing the single click sound? http://www.youtube.com/watch?v=wEUt2p783nA

    I have this problem too with my Mid-2012 MBP non-retina. The screen would click once, after being left for a long time, and would be fine after that, until you close it and re-open it again after a long time. It is especially loud in the morning so I think it is temperature dependent. Happened about 3 months after buying. I took it to Apple. First time they replaced the entire screen. They had to since that is the only way to replace the hinge. When I got it back, the screen still clicks. Took it back to Apple again. Second time they just tightened the screws securing the display with the unibody. When I got it back the second time, the screen still clicks. Took it back to Apple again. The third time they replaced the entire screen AGAIN! When I got it back, the problem was fixed for 2 days, then the screen started clicking again so I'm back to square one. I'm wondering whether I should take it to Apple the forth time, but then again, they've already replaced the screen twice which didn't work so I'm not sure what more they can do. It's either this is normal, which implies the screen hinge is really badly designed or the clicking has nothing to do with the screen at all.

  • Help! Every app crashes when interacting with plain text files

    I recently bought a 13" i7 MacBook Air. I love its design and I found OS X Lion unbelievably fast on it, yet I find myself in a very dark situation, now.
    From the Finder to iA Writer, to TextEdit, every single app crashes when working with plain text files. In Finder’s column view I don’t even have to open them: the instant one .txt is selected, Finder crashes.
    Creating a new user account seems to fix the bug for that account, but I just spent one whole day copying files from my old work MacBook (where Lion opened .txt files without a problem) to the new account and losing another entire day of work because of a stupid bug is out of question. Also, I feel it would be a very temporary fix. What if the bug presented itself again? Would I have to create a third, a fourth account, and so on?
    I didn’t use any migration tool because I wanted a very clean installation.
    On top of that, the machine is as App Store–only as one could be. The only “internet” apps I have on it are Chrome (for the occasional Flash video), Movist (I can’t work with Quicktime’s flying controls), and nvALT. I didn’t even had the time to install the Creative Suite on this one. I can’t for the life of me think this is app–related. I suspect it’s some weird OS bug.
    I work in advertising, and I do some work in Adobe’s Creative Suite but *all* my copy is stored in plain text files. I always did it that way so that my files would be future–proof. It is kind of ironic now. So please, if anyone as the slightest idea of how to fix this, please, please, help. I find myself with a brand new computer I can’t use for work.
    Alessandro

    What are the files named?
    Where are they being made? (What folder?)

  • Videos now single frame with audio only

    My 30g video Ipod's videos now show up under music. When I try to watch them they are just a single frame and I get the audio. The videos are fine when viewed with Itunes. How do I get my videos back to normal videos???

    correction: it works fine on my ipod when I have the "TV out" setting set to "off", but I'm only getting audio on my TV when I have the setting "TV out" set to "on." It has worked fine in the past.

  • While typing in an email, I can not delete or backspace a single letter. When I delete one letter, the whole line disappear.

    While typing in an email, I can not delete or backspace a single letter. When I delete one letter, the whole line disappear. I am using Window 7 and latest Firefox.
    == This happened ==
    Every time Firefox opened
    == Using Firefox on my new machine with Window 7.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Some emails I receive on my ipad seem to disappear when I want to look at them again.  Also I forwarded an email to several people with attachment.  WhenI went back into the email to print off the attachment it wasn't there.

    Some emails I receive on my iPad seem to have disappeared when I try to go back into them.  Also I sent an email with attachment to several people.  When I went back into my email the attachment had disappeared.  I phoned one of the recipients to see if the attachment had been delivered and it had.  She tried forwarding the email and attachment back to me.  I received the email but not the attachment.  I checked my iphone fior the original email and the attachment wasn't included.  I have IOS7 on the ipad but IOS6 on the iphone.  Can anyone advise please?

    http://www.apple.com/uk/support/ipad/mail/
    You can switch of delete mail on Server through settings>Mail Contacts Calenders>
    pick the relevant mail service and under advanced

Maybe you are looking for

  • How to remove Web Gallery when it is not longer in iPhoto

    Because of a hang of iMovie a messed around with my iPhoto Library. It ended in a Web Gallery published without the corresponding Gallery in iPhoto. So, how to remove the online Web Gallery?

  • Exporting Prores 422(HQ) Quicktime error -50

    I've been having trouble with this particular file, both in Compressor 3 and 3.5 We're trying to run movie through, and we're getting a quicktime error -50 each and every time. The input is a 1920x1080 59.94i film. We're trying to use compressor to I

  • Migration Assistant restore of Time Machine backup is incomplete

    Some app, I don't know which one, keeps messing up the disk drive catalog structure, forcing me to wipe the drive and do a complete restore. I just had to do it again today (third time in a year), but this time Time Machine isn't restoring the user a

  • Not able to find query in sq01.Urgent!!!!!!!!

    Hi all, I am trying to search a query AQL4CUST_SERVICECONTRACTINFO==. In sq01, in user group cust_service i can find a query name of contractinfo but the report name assign to it is AQFKCUST_SERVICECONTRACTINFO==.but I am searching for AQL4CUST_SERVI

  • MOV and AVI Files - Rendering Every Clip In The Timeline

    This is just a quick query really. When I try and add certain .mov and .avi footage into final cut express 3.5, the timeline requires the clips to be rendered fully. It also requires a render every time you move the clip or add a transition etc. If f