Single hot corner, multiple options?

Hi guys,
I recently updated my iMac from app store's downloadable Mountain Lion (10.8.2).
And I bought a Mac Pocket Book for learning about this new OS.
Here's the thing confused me a lot.
The author said these:
Use the drop-down menus to set options for any corner you want. After that, when you move your mouse to that corner, your Mac fires up the screensaver (or does what you told it to—put the display to sleep, launch Mission Control, or whatever). The only downside of setting hot corners is that Apple gives you eight options for each corner, so unless you want to use a modifier key with the corner, you don’t have enough corners to use all the options.
By using modifier keys (you can choose from Shift, ⌘, Option, and Control), you can get a single corner to do many different things. To add a modifier key to a hot corner, hold down the modifier key while you select what you want the hot corner to do from the Active Screen Corners window’s menus. Using modifiers with hot corners not only gives you extra flexibility, but it also prevents you from accidentally invoking the hot corner action when you’re mousing around.
But I cannot set a single corner with multiple options! Could you guys can do that???

I'm with you. I can get 10.8.2 to require a specific modifier key in a corner, but I cannot get multiple modifier keys to do different things in the same corner.
However, the author is right that on the last point. It can help prevent unintended activation.

Similar Messages

  • What is meant by single entry-multiple options in the selection screen

    hi,
      please let me know what is the meant by 'single entry-multiple options' in a selection screen.
    thanks in advance

    Hi Surya,
    Nomally we use to declare Selct options like
    <b>select-options : s_var for mara-matnr.</b>
    here you can enter range of values for material number like 000 to 9999999999.
    but if you want single entry multiple option you need to give no-intervals options when the select option will behave like parameter .. when you cannot give range of values but you can give multiple values for a single field.
    for single entry-multiple options  write the select option like this
    and see the diffrence.
    <b>select-options : s_var for mara-matnr NO INTERVALS.</b>
    here cannot enter low and high range for matnr but you can enter mulitple values for select option..you can enter only low range values..
    Please reward if usefull..
    Thanks,
    Gokul

  • Difference between Multiple single values and Selection option variables

    Hi !
    Can any one tell me the difference between variable types:
    Multiple single values and Selection option?
    I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
    Is there some difference in functionality or can they be used interchageably?
    Regards,
    Sri Harsha

    Harsha,
    When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
    Just check out there... you will be having tabs for each..
    Assign Points if it helps
    Gattu

  • Hp 6700 option to scan to single file or multiple files does not work-scans to single files only

    Cannot find a way  to scan multiple documents to a single file.  The option on the Scan function does not work!

    Hi @apdamw 
    Have you tried saving the scanned pages as a PDF? When you choose PDF in the format option, you will see the option to choose save all pages to a single file, or create a seperate file for each scanned page. Depending on what option you see, you will need to tick or untick the option.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Screensaver hot corner no longer working in 10.9.1

    Upgraded to 10.9.1 from 10.9
    Moved my moise pointer into the hot corner to activate the screensaver and it did not work.
    I tried:
    A different screensaver.
    Activating a different corner
    Changing the option on the corner to "Mission Control" (which worked) then back to Activate ScreenSaver and it did not work.
    Turning the corner to "-", setting it. Then going back in and setting it back to the screensaver. It did not work.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.dock.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out, log back in, and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved. If possible, restore it from a backup that predates the problem.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Can you assign a keystroke to a hot corner?

    Can you assign a keystroke to a hot corner?
    For example, I want to assign option-D (toggles something in some app I use) to a hot corner.

    This would be like executing any program with a combination of buttons. It's going to depend on your operaating system. My guess would be that most operating systems aren't going to make it easier to 'take over' keystrokes because that could interfere with the operation of some programs. For example, if you have MSWord up on your screen, it is quietly listening for a bunch of keys Alt-F, ctrl-x, crtl-o, ctrl-p....
    You might be able to find some kind of program like this, but it's not going to be java specific.

  • Single file to multiple IDOC's

    I have a scenario (File to IDOC) where single file creates multiple IDOC's.
    I got message mapping error in production for record 622.
    Question here is will the IDOC's till entries 621 be created in the ECC system or the entire messaged failed.?
    It is sure that from 622 nothing was processed.
    Thanks.

    So, in Mapping Mapping, in outbound interface, you certainly used an external definition with option "maxOccurs=Unbounded". is that right?
    Anyway, as in moni, you have only one XML message, and as you said to us that this message is in error in moni (so red flag), it's the wole message (file) which has been rejected.
    Have you check the WE02 (ECC) and IDX5 (PI) ?... because you will have directly your answer of your question "does my file is treated partially ? or completly rejected?" !
    regards.
    mickael

  • Single  bill for multiple connections

    Dear All,
    Is it possible to print single bill for multiple connections ? This is my requirement Customer X having 2 connections for Water and 2 connections for Electricity.But we need to bill Electricity and water in a different bill ,but 2 connections for water and 2 connections for electricity should be billed in a single bill.We have created a separate contract accounts for 4 connections.
    Pls guide...
    Best Regards
    Jay

    Hi,
    I am not sure, if i completely understand your requirement.
    But as per my understanding, you have 4 installations, ( 2 for Water and 2 for Electricity) and you want to have a single invoice created for Electircity and water.
    So, its better to create a single contract account with multiple contracts.
    If you are creating multiple contract accounts, then it would create multiple invoices (one per contract account - regular scenario). So, please have a multiple contracts with single CA.
    Also, if you want to invoice all the contracts together, please find the option on contract for joint invoicing. (option 1).
    And, in case you want to bill two connections of electricity as one entity and two of water as one, so in this case, have two contract accounts one for Electricity and one as a part of water. And assign all the electricity contract to one CA and rest of water to another CA.
    Invoices are always created at contract account level and the billing documents are created at contract level.
    Hope this helps !!
    Regards,
    Rajesh Popat

  • How to do register-level programming for NI6025E when I want to acquire single scan incuding multiple input channels?

    How to do register-level programming for NI6025E when I want to acquire single scan incuding multiple input channels?

    Thanks, Alan, I think I indeed need to combine aiex1.cpp and aiex2.cpp. I made a change to Configure_Board of aiex1.cpp  as follows:
    //Call this function to configure board options.
    void Configure_Board(tSTC *theSTC,tESeries *board)
     //Clear configuration memory
     theSTC->Write_Strobe_0.writeRegister(0x0001);
     //Clear ADC FIFO
     theSTC->Write_Strobe_1.writeRegister(0x0001);
     //Writing to Config_Memory_High_Register for channel 1 settings
     board->ConfigFifoHigh.setChannel(0);
     board->ConfigFifoHigh.setBank(0);
     board->ConfigFifoHigh.setChannelType(board->ConfigFifoHigh.kChannelTypeRSE);
     board->ConfigFifoHigh.flush();
     //Writing to Config_Memory_Low_Register for following channel 1 settings
     board->ConfigFifoLow.setLastChannel(0);
     board->ConfigFifoLow.setGeneralTrigger(0);
     board->ConfigFifoLow.setGain(board->ConfigFifoLow.kGain001_0);
     board->ConfigFifoLow.setPolarity(board->ConfigFifoLow.kPolarityBipolar);
     board->ConfigFifoLow.setDither(0);
     board->ConfigFifoLow.flush();
     //Writing to Config_Memory_High_Register for following channel 0 settings
     board->ConfigFifoHigh.setChannel(1);
     board->ConfigFifoHigh.setBank(0);
     board->ConfigFifoHigh.setChannelType(board->ConfigFifoHigh.kChannelTypeRSE);//RSE mode
     board->ConfigFifoHigh.flush();
     //Writing to Config_Memory_Low_Register for following channel 0 settings
     board->ConfigFifoLow.setLastChannel(1);
     board->ConfigFifoLow.setGeneralTrigger(0);
     board->ConfigFifoLow.setGain(board->ConfigFifoLow.kGain001_0);
     board->ConfigFifoLow.setPolarity(board->ConfigFifoLow.kPolarityBipolar);//BIPOLAR
     board->ConfigFifoLow.setDither(0);
     board->ConfigFifoLow.flush(); 
     return;
     and a change to test(iBus *bus):
    do
      uStatus = theSTC->AI_Status_1.readRegister();
      if (!((uStatus & 0x1000) == 0x1000))
        uValue[i] = board->AIFifoData.readRegister();
       i++;
     } while(i<1);
     printf("Value %d is %6.2f\n",0,FindADDouble(uValue[0]));
     printf("Value %d is %6.2f\n",1,FindADDouble(uValue[1]));
    but it doesn't work, why?
    How shoud I do?

  • Hot Corner as Droplet via AppleScript?

    Hi there,
    Could it be technically possible to make hot corner run as a droplet? It's feasible to open applications, files, scripts etc from hot corners by using programs like cornerclick, butler etc but none of them has any support for drag and drop. Has AppleScript means to do that? For example this would be by far the fastest way to tag and copy an image(via automator workflow) from Safari, Finder etc by requiring almost no precision compared to bringing up hidden dock and aiming for specific icon(droplet).
    Thanks,
    Üllar

    Till now I was using download folder to drop images and folder action was monitoring for any new files then to be opened with tagging application as HD suggested. The problem was that this method was not instantaneous and sometimes could skip quite a many images when they were added too fast. Save Image to "Downloads" would be even better solution compared to dragging, but somehow it skips the Where from: address info and I had to create an Automator workflow which inserts source URL from Safari into file spotlight comments, but also this folder action was sometimes very slow to react and the page in Safari was closed.
    iPhoto is too heavy/slow program which I would avoid from my workflow. I was looking into it only to see how it is getting around the sandboxing, but I guess it's only due to being Apple's own product so no avail.
    I have managed to find a workaround but it's ridiculously complex though quite fast. It uses six! different applications so it's far from straightforward. First the BetterTouchTool translates double triple tap on an image into keyboard shortcut which is picked up by QuicKeys which simulates drag and returns the cursor to original location, it needs 0.3s delay before release so it's almost instantaneous. Of course if the droplet is in the dock, its position is not static and in full screen mode, the dock is also hidden which could complicate things further(that's why I was asking for HotCorner droplet). So DragThing came to help. It's meant for additional docks, docklets etc. I just created one icon dock(only appearing when Safari is frontmost) in the corner and it's smart enough to also read image files dragged from Safari. After the drop it runs Automator workflow which copies dragged file to Download folder and opens it in TagIt, which I use for tagging. Up pops a little window and with few keystrokes it suggests already used tags so I can just press enter/space. After that Hazel will check for openmeta tags(unfortunately not availabel in Automator workflows) and moves them to designated folder. All this takes little more than a second of user intervention, most of it to insert tags.
    Advantage of using tags to folders is of course the ability to have many different criteria for one single file, which makes looking for a specific file a breeze in spotlight when the collection reaches to a size of a database.
    I hope somebody can find something useful from this workflow. Thanks again for the feedback.

  • Hot key or hot corner to put my monitors to sleep

    Is there a way I can assign an entourage hot-corner or a hot key to put my monitors to sleep?
    I'd love to be able to shut them down with a click, when I walk away.
    Thanks in advance for any help!

    Hi marglar,
    I'm not sure if you can create a shortcut to put your display to sleep.
    You can use this keyboard shortcut to put your mac to sleep: Option-Command-Eject.
    Other shortcuts are here:
    http://docs.info.apple.com/article.html?artnum=75459
    Also, this might help:
    http://www.apple.com/support/mac101/customize/4/#l4
    Guylaine

  • How do I use my control key to highlight multiple options in a PDF?

    How do you select multiple options from a selection field in a PDF form? I've tried control and mouse click as the directions indicate on the form. However, I am a new Mac user and I do not know if the control commands are the same. I viewed the commands and combonation key commands in the list provided on this support site. I could not find one to address this specific function.
    -Mrkmrtynz

    Hi Rick,
    Well, following up on the previous posting, I actually did figure out how to make it work but it seems rather inefficient. I can insert a new paragraph right after the paragraph that has the table anchor but when i cut the table, i also cut the paragraph i just created. So to get around that, I create two paragraphs, so that there will be one paragraph left after i do the cut and that is the paragraph that I paste the table into. Once the table is pasted into the new paragraph, I delete the other paragraph that I created.
    Here's the updated code from the for loop:
    var vTbl = vDoc.GetUniqueObject(Constants.FO_Tbl, vTextItems[i].obj.Unique);                 
    var vAnchorPgf=vDoc.NewSeriesPgf (vTbl.TextLoc.obj)      
    var vAnchorPgf2=vDoc.NewSeriesPgf (vAnchorPgf);        
    var vAnchorTextLoc=new TextLoc (vAnchorPgf2, 0);             
    var vTblTextRange=new TextRange ();        
    vTblTextRange.beg.obj=vTbl.TextLoc.obj;       
    vTblTextRange.beg.offset = vTbl.TextLoc.offset;        
    vTblTextRange.end.obj=vTbl.TextLoc.obj;        
    vTblTextRange.end.offset = Constants.FV_OBJ_END_OFFSET                 
    vDoc.TextSelection=vTblTextRange;        
    vDoc.Cut (0);                
    vTblTextRange.beg.obj=vAnchorTextLoc.obj;        
    vTblTextRange.beg.offset = 0;              
    vTblTextRange.end.obj=vAnchorTextLoc.obj;       
    vTblTextRange.end.offset =0;                 
    vDoc.TextSelection=vTblTextRange;       
    vDoc.Paste (0);                   
    vAnchorPgf2.Delete();        

  • Select multiple options in safari or firefox

    Hello to all,
    I am trying to select multiple options in web form on safari or firefox. I am trying with ctrl and mouse but is not working. This fields are not in order so I can not use shift it must be Manuel selection.
    Thank you in advance for fast help.
    Ivan

    Try command key instead of control key.
    OS X Mavericks/OSX Yosemite
    http://support.apple.com/kb/PH13826
    Best.

  • OS 10.8 just installed. "Hot Corner" to put new iMac 2.7 GHz Intel Core i5  to sleep mode doesn't work. Have tried cordless and corded mouse with same result. Momentary sleep, immediate wake. Any idea how to fix?

    Set "hot corner" to put iMac to sleep.  Doesn't work.  Selecting the corner will momentarily put to sleep, but immediately rewakes.  Have tried all four corners with same result.  Have tried with wireless mouse and with corded mouse with same result.  Any ideas as to how to fix?

    You've been so great, I want to thank you for all the help over a very frustrating day.  Last evening, I redownloaded and installed the fresh copy of Mountain Lion.  The problem remained.  After installing the new OS 10.8, any clicks on a web page (Firefox browser) didn't open the page, but instead made a copy of the page on the desktop. Felt it must be hardware  degrading, so I set up a case with Apple support for today.  Early in the diagnostics, I had swapped out for a corded mouse and the problem remained.   As a last try, I changed out my wireless mouse for a different wireless mouse. That seems to have done the trick. My Logitech mouse is incompatible with OS 10.8.
    Thank you again, so much!
    .../awards rkaufmann87 500 points!

  • Reg- Single invoice for multiple delivery docs

    Dear All,
          WIth the suggestions from the below given thread, i have changed the routines in copying control for item level as 03.
    SAP ERP Sales and Distribution (SAP SD)
    Using delivery duelist(VF04) , I selected 2 pending docs and tried to create billing doc , but it got created as separate invoice. what is the actual process to create single invoice from multiple delivery document.
    Rgds

    Those deliveries having same criteria like,
    1.  Payer
    2.  Payment Term
    3.  Incoterms
    4.  Destination country
    5.  Billing date
    6.  Actual Goods issue date
    7.  Foreign data trade
    8.  Billing doc type
    9.  Shipping conditions
    10  Account assignmment group
    11. Exchange rate
    12  Billing relevance field in the item category
    13  Sold to party
    will be combined into one Billing document automatically and this controlled from the copy control table. and it VTFL  choose your delivery header  and in that at item level VBRK/VBRP should be 001
    In VF01 you can input three or more such deliveries and execute then those will be combined in to a single bill and you can do that in VF04 also
    Regards
    Raja

Maybe you are looking for