Single Item Multi Level Planning to be triggered from Sales Order

Hi all,
I am using strategy 50 and want planning for single item to be carried out at the time of sales order creation to avoid MRP run everytime sales order is created..In order to achieve it i checked Automatic Planning Indicator in "OVZG" for the requirement class "045" which is requirement class for sales order of strategy 50. But still unable to achieve the desired result..
Please guide me through.
best regards,
shah

Hi all,
I am using strategy 50 and first two levels of the finished good are make to order. Whenever i create sales order a planned order is automatically created for the finished material but for the material level below no planned order is create. Please guide me how can i achieve automatic planned order creation for the materials which are one level below the finished material (Note: Assembly is also of make-to-order strategy)
Best Regards,
Shah

Similar Messages

Automatic Single Item multi-level planning on sales order creation

Hi all,
I am using strategy 50 and want planning for single item to be carried out at the time of sales order creation to avoid MRP run everytime sales order is created..In order to achieve it i checked Automatic Planning Indicator in "OVZG" for the requirement class "045" which is requirement class for sales order of strategy 50. But still unable to achieve the desired result..
Please guide me through.
best regards,
shah

HI shah,
in sales order go to Procurement tab there u will get the requirement type. system will determine requirement class based upon following criteria
1) by strategy group in material master
2) if strategy group not there then MRP group
3) if mrp group not there then material type
4) by this also not able to fine the requirement type then special rule is used with the help of item category and mrp type
5) if this also fails then it will go with item category only
6) this also fails then it will give any requirement type
hope this is clear
regards
ramakant

Item line with category TAD not copied from Sales order to delivery

Hello,
we have a sales order with one line item with line item category TAN and one line item with line item category TAD.
When we deliver the sales order, only the line item with category TAN will be copied into the delivery. So there is only one line item in the delivery, but we need both to be copied.
I checked VTLA and the header entry LF delivery OR standard order has both line items on item level.
Setting on header level:
Order requirements: 001
Combination requirement 051
Header Data: 001
Header Data ext Sys 0
Handling Units: 000
Copy item number: unchecked
Any suggestions?
Thanks
Anne

Hello,
I tried and it said: item category TAD is not defined.
So why would it not be defined?
Thanks
Anne

Project Revenue Plan Not Update from Sales Order Item

I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
Regards,
Venkat.

HI Venkat,
You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
After the new credit limit is set execute the following steps:
u2022     Go to the t-code Change billing request (VA02)
u2022     Open the required billing request
u2022     Remove the account assignment of WBS element from each line item
u2022     Save the billing request
u2022     Reopen the billing request in change mode
u2022     Reassign the WBS elements to all line items
u2022     Now the changed credit limit will take affect
u2022     Check the Planned Revenue for the said project in CNS41, it should get updated.
Rgds
Deepak

Defaulting profit center from sales order while doing delive COGS line item

HI All
In my company COGS account is a cost element.when PGI(post goods issue) was posted, sap will automatically create an accounting dcument
CR:stock account ( profit center from material master data or from sales order)
DT:Cost of goods sold ( profit center from cost center master data)Can we default profit center from material master data(or from sales order) in the COGS line item
Thanks in advance

What is your current Version? Is it ECC6 and New GL implemented? Document split configuration will help you.
If you are not using ECC6 and New GL, then try T.Code 3KEH and determine profit center based on Valuation area. OR
You may look into GL Line item level, Write a Validation Rule to select profit center.
Hope this will help you.
Thanks
VR

Item text from sales order to purchase requisition

Hi Experts,
I have below queries ,
1. What are the controls to generate/create a purchase requisition from a sales order.
Is this possible that a Pur. req generated from a sales order but sales order is not its account assignment.
How item text from the sales order can be copied to purchase Requisition, does settings in purchase requisition in SPRO (Purchasing Purchase req-text for purchase req----define copying rules) works only for automatically created Pur req.??
item text from sales order can be copied for PR created through MRP or planned orders converted to PR.??
I will appreciate if someone can provide me documentation on basics of sales and distribution at my email
[email protected]
Thanks in advance
anand

hello, friend.
i can only answer part of your question as i am not sure of the others. however, yes... you can automatically create a purchase requisition from the sales order.
one example is third party sales. because of the item category group that you specified in the material master, the sales document determines an item category (and schedule line) that controls the creation of the purchase requisition. here, the system knows that you must source the material from your vendor for delivery to your customer.
further, as in the above case, when your company creates the PO with reference to the PR, your company appears as the buying entity but the ship-to address is that of your customer.
i did not understand your question on account assignment. please elaborate and we'll see if we can come up with the answer.
if you wish to see documentation, you could refer to SAP's article on Third Party Sales. other scenarios such as just-in-time inventory for trading companies or make-to-order companies may also apply.
regards.

Item Quantity not Copied exactly from sales order while creating Invoice

Hi Experts,
at
My Functional Guy encountered a strange problem while creating Invoice from Sales Document.Actually there are 6 line material items in the order and the sixth line item is having a quantity of 8EA While trying to generate an invoice from sales order the sixth line item billed quantity gets converted to 70EA automatically in the invoice .This only happens with the sixth line item and the remaining all are fine.I have checked OSS Notes and could not get a.ny fruitful results.Please let me know if you have any suggestions.I also checked with the functional guy whether its the problem due to copy controls.But everything is fine.Please help
Best regards,
Lakshman

Are your invoices combing multiple delivery line items based upon copy control/invoice split/combine configuration settings?
If your order was for 8 and you delivered 8, and there is no conversion for units, and the only quantity being included is for a single order line and delivery line, then there must be an error in customer-written exit or enhancement code that you have yet to find. What do you see in debug when the data for this line is being collected and set?
Edited by: DaveL on Sep 6, 2011 4:19 PM

How to release Stock blocked against deleted line items from Sales order.

We have Scenario as follows.
Sales order made for items available in stock. Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
Overall stock available is same as quantity mentioned in deleted line item.
In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
i.e deleted line item.
How to release these stock and make available for sales. Any standard process available ? or any other solutions
Thanks & Regards,

I got a solution for my question from other forum. for info
Go to SE38 and enter program SDRQCR21 then execute...
Enter line item which is blocked for sales order in MD04 and enter plant then check Data
transfer box and uncheck other boxes... It will pop up information and click yes...
You will get one report and Stock inconsistency will go off and then check it in MD04....
regards

How to find open item from sales order

Hi all,
my requirement is one sales order is there partial delivery is happened for some materials,take exampla matarial X has 100 quantity in sales order pratial delivery 50 is done, iwant to know the open order qunatity for a material X from sales order.
regards,
kishore.

hi kishore,
in the partial delivery scenario, the sales order items always be a open.
you can see the document flow of that document by using Tcode : VA03 then click on'update document flow' icon. then system will show the status.
i.e sales order is 'being processed'
outbound delivery is completed
billing document is completed
and accounting document in not cleared.
if it is helpful, then give me the points.
Regards,
somu.

Sales invoice carrection & item deletion from sales order after PGI

Hello Sir ,
               i want to change the item price after billing , account document is created .
               what can i do for it ?
              and second is . i want to delete line item from sales order after PGI
              like after delivery customer want to change the goods .
              please ans me asap
Thanks
Arvind
Edited by: saparvind on Nov 5, 2009 5:30 PM

Hi ,
i want to change the item price after billing , account document is created .
what can i do for it ?
Once the Billing document and corresponding Accounting document created, then you have to cancel the BILLING DOCUMENT to change the Price.
To change the Price , If it is Manual price directly you can change in the Billing document.
If the Price is coming from the CONDITION RECORDS then you have to UPDATE the pricing to the CARRY OUT NEW PRICING in the Billing documents, with Option B
i want to delete line item from sales order after PGI
like after delivery customer want to change the goods .
For this you have to reverse the PGI in the Transaction code VL09 and then cancel the DELIVERY in VL02N---Delete.
Now you can change the Goods in the Sales document in VA02.
Please check the above and revert.
thanks,
santosh

Different ship to party for one of two line items from sales order

Hi Experts,
1. The Sales Order No.19701 is an Export Order, received from M/s. Industries & Construction, Indonesia. We have to supply all the materials on FOB Indian seaport basis.
2. However, we have to dispatch against Line Item No. 280 & 290 to one of our subvendors, M/s.Industries, sec,rabad to complete some Control Assly. as per agreed Inspection terms.
3. After completion of Control Assembly & Client's Inspection materials will be finally dispatched to nearest Seaport for seafreight.
So here i can i map this scenario from sales order to billing, ship to party for those 2 items must be sub vendor.
Thanx in advance
Madhu

Hi madhusudan
You can map different ship to party . First you need to configure customer master for the same.
Add the alternate ship to parties to customer master of sold to party, your export customer.
While creating master data for sub vendors as ship to party ,you need to maintian proper customer pricing pricing procedure and tax classification as you mentioned customer is export customer ,but ship to party seems to be domestic ,so carefully check the same. also check the shipping condition if it is separate for exports.
Then in Sales order transaction on line item data ,change your ship to party for the line item as per the the requirement.
for further processing of this scenario ,like excise invoice and ARE1 u might have lsome issues if ship to party is liable for duties and taxes and Sold to is exempt and you are drawing only one invoice for these 2 separate deliveries. pl check on the same.
I hope this helps
Revert for any queries
Regards
Mandar
Edited by: Mandar Deshpande on Apr 13, 2010 11:04 PM

Tax condition(JVAT) of ship to party is not triggering in Sales order

Hi,
Tax condition(JVAT) of ship to party is not triggering in sales order...
Scenario:
Tax condition types:
JCST- CST Payable
JVAT- VAT Payable GJ
Customer Tax classification for JVAT in OVK3:
1- VAT 4%
A- VAT 0%
B- VAT 2%
Material Tax classification for JVAT in OVK4:
0-Tax Exempt
1-Full Tax
In CMR for
Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / 1 / VAT 4%
In CMR for
Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
Country/Name/Tax category/Name/Tax Class./Descrption
IN / INDIA / JCST / CST Payable / 1 / CST 3%
IN / INDIA / JVAT / VAT Pay GJ / A / VAT 0%
Access Seq: JLST
Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
Now the sale(Shipping to) is happening in Gujarat..
In sales order
I entered SP:1001 and SH: 2001
When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
Kindly guide me where i went wrong...
Regards
Azeez.Mohd

Hi Friends.
I found the solution...
Its customization mistake..
Solution:
When we have 'n' tax categories then we should have 'n' condition tables..
I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
with regards

Adding binlocation items from sales order to sales invoice through DI API

Hi
I want to add items from sales order to sales invoice.
when i am allocated bin locations for the item sales invoice is not adding
is there any way to update BIN Location Alocation-Issue qty through DI API
please help me....
regard,
LakkshmiKantth

Hi Lakshmi,
check this http://scn.sap.com/message/14740146#14740146
REgards
edy

Implications of changing credit check from sales order level to delivery

Currently the credit check is availbale at the sales order level in the system and if I want to change the credit management settings so that credit check will be available at the delivery level.
What are the implications of changing credit check from sales order level to delivery

>
Mangesh Desai wrote:
> Currently the credit check is availbale at the sales order level in the system and if I want to change the credit management settings so that credit check will be available at the delivery level.
>
>
> What are the implications of changing credit check from sales order level to delivery
Hi,
No Implications simple credit check will not happen order level it will happen delivery level .
*system will not conceded at order level open order will not be calculated
Best Regards,
venkataswamy.

Smartform- Item Level Output to be displayed for sales Order

Dear All ,
I have a requirement to display output on smartform on item level Baisi i.e GO to Va02 , select Item > Go to Extras ->Output> Item --> Print Priiew .
My Problem is that I am using copy of standard driver RVADOR01 program . In this all item vales are passed to smartform .
I need to display information for single item selected .
In this program there is no structure that will show which item is selected
Kindly help . I will be highly tahnkfull

Hi,,
just check the interface structure values any fields are marked or not . check any notification are there for particular line item in the structure.
Regards,
karthikeyan k s.

Single Item Multi Level Planning to be triggered from Sales Order

Similar Messages

Maybe you are looking for