Single node install

Is it possible to install the APPS on one machine and set oracle unix account as database owner and applmgr as apps owner?
Thanks,
P.

Yes. Rapidwiz installation wizard will prompt you for this information. In this case you may want to start the installation as root.

Similar Messages

  • 10g single node install

    How best to slice disk drives? Single Node install on a Sun V480 (2 cpu's @ 900mhz, 2 disk drives @ 36gb each), solaris operating system. For my test server I will install all 10g components. How best to distribute the 10g load (oraInventory, appserver, infrastructure, Metadata Repository) between the two disk drives?

    Part of the installation involves the installer installing CRS software on the other nodes, creating the ASM and RAC instances and so on.
    All this is done in an automated fashion - requiring each node to be prepped accordingly, ssh keys generated, public keys distributed and added to authorised keys and so on.
    None of these installation steps (all critical) will be part of a "single node" RAC install.
    In fact, the prepping part is even more critical and complex than the actual installation - if done properly the installation will be smooth and painless. If not... you will run into all kinds of problems. And this is often the case as one has to deal with getting the shared devices to be seen by all nodes, ensure consistent device mappings across all nodes, ensure that multipath (load balancing) I/O works, etc.
    For this at least 2 nodes are required. For actual proper RAC testing itself, even 2 nodes do not suffice and at least 3 are needed.
    IMO you are pretty much wasting your time as no real practical RAC installation lessons will be learned mucking about with RAC and a single VM.

  • 9ir2 Single Node RAC + RH80

    Hi all.
    I'm triying to install a single node RAC based in the single node rac for linux document in the metalink.
    The document was made based in a oracle 9iR1 database an RH71, I have followed the steps and i have a working kernel made by my own, the raw devices, and softdog hacked for being testing only. But the service does not go up.
    I don't know if someone have made a single node rac instalation and can help me to choose the right pieces.
    I don't have a RHAS2.1 but I do have a UnitedLinux 1.0 Server Patched.
    I want to try the RAC tech but here (ecuador-sudamerica) is dificult to find firewire cards and disks so I´m working around a single node instalation.
    Any help will be apreciate.
    Fernando

    Hi
    Database version and GI versions are 11.2.0.2.2. And these are not multinode RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (Veritas Clusters).
    I agree with you failover sinario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multinode, here whole instance will be re created on available nodes.
    Hi
    Database version and GI versions are 11.2.0.2.2. And these are not multi node RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (VERITAS Clusters).
    I agree with you failover scenario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multi node, here whole instance will be re created on available nodes.
    Thanks,
    Thanks,

  • Applying PL19 for SAP J2EE 6.20  for a Single Node

    We are trying to upgrade from EP6 SP2 patch 2 to patch 3.
    A pre-req for applying Patch3 is that we need to be at PL19. Turns out we are in between PL16 and  PL17 from a SAP J2EE 6.20 standpoint.
    We managed to download SAPJ2EE620C_19-10001433.SAR the SAR file for getting the SAP J2EE 6.20 from PL16+ to PL19.
    On reading SAP Note 529088 ( that helps you with installing the SAR file ) it seems "SAPJ2EE620C..." the 'C" in the SAR file name denotes that it is for a Cluster Node. We have a Single node install. For which we ought to see a 'S' in that place. On Service.sap.com we dont know of a place where we can find the .SAR file that we may need for a single node version.
    We  went ahead and ran the visual.bat and that brought up a screen meant for a cluster version.
    It has been two days since we have working on this.
    Anybody has any idea/experience with what we are taking about. Please help.
    thanx for your help.
    rj.

    Hi rj,
    If you have installed EP6 SP2, you have installed the Clustered Version of J2EE (dispatcher, server, state(pl21)).  The Single node was used for EP5.  I believe you are getting this terminology confused with a clustered install of EP6 for HA purposes where the actual application piece is clustered.  So even an EP6 install running on a single server runs on a the J2EE Engine Cluster. 
    So if you ran the visual.bat for PL19 and the portal started up fine, you have successfully upgraded your J2EE version to PL 19.  Just a quick hint, when you are running the patch install, select upgrade and put in the path to your instance (i.e. c:\usr\sap\DEP1\j2ee\j2ee_00).
    Hope this helps to clarify,
    Marty

  • Oracle Single Node RAC - Oralce Clusterware Install

    Hi
    I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
    I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
    However - I do not want to use ASM in any of my set-up.
    We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
    Is this possible?
    All the documents I have include reference to ASM
    If I try and install Grid - I am also asked for ASM information.
    I find ASM an un-necessary overhead given the storage we have and do want to use it,
    Can anyone help?

    Hi,
    no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
    http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
    Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
    What you should use in conjunction with NFS however is dNFS.
    Regards
    Sebastian

  • Install oracle10g AS 904 infrastructure and middle tiers on single node??

    Hi
    I will install oracle10g AS 904 infrastructure and middle tiers on single node.
    I have some question.
    1.install infrastructure and middle tiers must have different home_dir , It is mean use one user (EX:oracle) or two users (EX: infra and mid ) install ?
    2. If use one user install , How to edit the user profile ?
    3. If it install complete , Which em console do I start (infra or middle)??
    4. Ple give the clear steps to install Infrastructure and Portal and wireless
    on single host for AIX5L.
    thank
    kevin

    Hi Kevin,
    1. Create two seprate Oracle homes. Use the same user to install both.
    2. Are you refering to changing ORACLE_HOME, etc?
    3. Both. To save memory you can shut them down when you don't need them.
    4. Use the quick installation guide. You can find it under documentation here on OTN.
    Regards,
    Mathias

  • Install 10gr2 ASM on single node, need clusterware installe first?

    Install 10gr2 ASM on single node, Do I need install clusterware first?
    When I install clusterware on single node, it shows " the specified nodes are not clusterable"
    Thanks.

    ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Install a grid infrastructure for a cluster for single node Windows Server

    Hello,
    Can you suggest me how to install a Oracle Single Node RAC 11g on a Windows Server 2008 x64 bits? It's for testing purposes and I don't need two nodes. I know that Linux is better, but my company only uses Windows servers. Our former consultant was able to do it, but didn't tell us how to and that server was lost.
    I know that we have to install first Grid Infrastructure. Running the "Oracle Grid Infrastructure" installer, I could successfully install a "Grid Infrastructure for a Standalone Server". But that grid is not for a RAC database. When trying to install the Database software, it allowed to me to only install "Single instance database", not "Real Application Cluster database installation".
    Running the "Oracle Grid Infrastructure" installer, I tried to select option:
    "Install and Configure Grid Infrastructure for a Cluster" -> Typical Installation:
    SCAN Name: SRVORAC-cluster
    Validating SCAN information
    INS-40922 Invalid SCAN Name - unresolvable to IP address.
    Is it possible to install a grid infrastructure for a cluster for a single-node or one-node Windows Server ?
    Edited by: user521219 on Jan 30, 2012 12:46 PM

    HI,
    You probably have misconception about Single node RAC. This feature does not need that you have only one physical machine in a RAC, it actually means that in a RAC environment (2 or more nodes), you can run your database on only one node(single instance) and then later you can move this single instance to any other node of the RAC (so that you can do some patching on this node making your database available all the time). This also has some other benefits, see bellow.
    http://www.oracle.com/technetwork/database/clustering/overview/ug-raconenode-2009-130760.pdf
    http://docs.oracle.com/cd/E11882_01/install.112/e25666/whatsnew.htm#sthref8
    Salman

  • Install RAC OBS on single node using VMWare

    Re: How to install Muti_node R12 using VMWARE
    Mine is a little different.
    I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
    I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
    Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?

    Hi,
    Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
    Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
    Regards,
    Hussein

  • Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

    Hi
    I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
    I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
    However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
    However when I start the same locally from lsnrctl command listener starts.
    trace_OraDb11g_home1-1212159AM174.log
    ====================================
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
    ` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
    `jxn-ux-ebs1d1q` failed.
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
    on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
    `jxn-ux-ebs1d1q` succeeded.
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
    bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
    [AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
    has placement error.
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
    [AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
    [AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
    [AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
    .lsnr` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
    ember `jxn-ux-ebs1d1q` failed.
    [AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
    lsnr` on member `jxn-ux-ebs1d1q`
    [AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
    mber `jxn-ux-ebs1d1q` succeeded.
    [AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
    -ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
    [AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
    snr' has placement error.
    [AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
    [AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
    source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
    [AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
    JXN-UX-EBS1D1Q.lsnr' has placement error.]
    [AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
    [AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
    The crsctl has details as below:
    =====================
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    1 ONLINE ONLINE jxn-ux-ebs2d1q
    ora.LISTENER_SCAN2.lsnr
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.LISTENER_SCAN3.lsnr
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.cvu
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
    1 ONLINE OFFLINE
    ora.jxn-ux-ebs1d1q.vip
    1 ONLINE ONLINE jxn-ux-ebs1d1q
    ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
    1 ONLINE OFFLINE
    Not sure how to fix this .
    Regards
    Ram

    I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
    along with SCAN_LISTENERS

  • GI installation on a single-node cluster error.

    Hello, I am trying to install GI on a single-node cluster (Solaris 10 / Sparc) but the root.sh script fails with the following error (this is not a GI installation for a Standalone Server :
    root@selvac./dev/ASM/OCRVTD_DG # /app/oracle/grid/11.2/root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME= /app/oracle/grid/11.2
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /var/opt/oracle/oratab file...
    Entries will be added to the /var/opt/oracle/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /app/oracle/grid/11.2/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    ACFS-9200: Supported
    ACFS-9300: ADVM/ACFS distribution files found.
    ACFS-9312: Existing ADVM/ACFS installation detected.
    ACFS-9314: Removing previous ADVM/ACFS installation.
    ACFS-9315: Previous ADVM/ACFS components successfully removed.
    ACFS-9307: Installing requested ADVM/ACFS software.
    ACFS-9308: Loading installed ADVM/ACFS drivers.
    ACFS-9327: Verifying ADVM/ACFS devices.
    ACFS-9309: ADVM/ACFS installation correctness verified.
    CRS-2672: Attempting to start 'ora.mdnsd' on 'selvac'
    CRS-2676: Start of 'ora.mdnsd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'selvac'
    CRS-2676: Start of 'ora.gpnpd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'selvac'
    CRS-2672: Attempting to start 'ora.gipcd' on 'selvac'
    CRS-2676: Start of 'ora.cssdmonitor' on 'selvac' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'selvac'
    CRS-2672: Attempting to start 'ora.diskmon' on 'selvac'
    CRS-2676: Start of 'ora.diskmon' on 'selvac' succeeded
    CRS-2676: Start of 'ora.cssd' on 'selvac' succeeded
    ASM created and started successfully.
    Disk Group OCRVTD_DG created successfully.
    The ora.asm resource is not ONLINE
    Did not succssfully configure and start ASM at /app/oracle/grid/11.2/crs/install/crsconfig_lib.pm line 6465.
    /app/oracle/grid/11.2/perl/bin/perl -I/app/oracle/grid/11.2/perl/lib -I/app/oracle/grid/11.2/crs/install /app/oracle/grid/11.2/crs/install/rootcrs.pl execution failed
    I also found the "PRVF-5150: Path OCRL:DISK1 is not a valid path on all nodes" error but as I have read it is a bug I Ignored it. But...
    I think my ASM_DG OCR and voting is ok, accessible by grid user and 660. It seems ASM does not start or does not start in time.
    Any help is wellcome.
    Thanks in advance.

    Thanks a lot for the hint. I had already checked this doc. but I think it is not the problem. Actually de error ora.asm is not online is not correct. After failing root.sh, ora.asm is ONLINE:
    root@selvac./app/oracle/grid/11.2/bin # ./crsctl check resource ora.asm -init
    root@selvac./app/oracle/grid/11.2/bin # ./crsctl stat resource ora.asm -init
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=ONLINE on selvac
    The last part of the /app/oracle/grid/11.2/cfgtoollogs/crsconfig/rootcrs_selvac.log file reads :
    >
    ASM created and started successfully.
    Disk Group OCRVTD_DG created successfully.
    End Command output2011-04-14 13:24:16: Executing cmd: /app/oracle/grid/11.2/bin/crsctl check resource ora.asm -init
    2011-04-14 13:24:17: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:17: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:17: Checking the status of ora.asm
    2011-04-14 13:24:22: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:22: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:22: Checking the status of ora.asm
    2011-04-14 13:24:27: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:28: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:28: Checking the status of ora.asm
    2011-04-14 13:24:33: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:33: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:33: Checking the status of ora.asm
    2011-04-14 13:24:38: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:38: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:38: Checking the status of ora.asm
    2011-04-14 13:24:43: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:43: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:43: Checking the status of ora.asm
    2011-04-14 13:24:48: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:49: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:49: Checking the status of ora.asm
    2011-04-14 13:24:54: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:54: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:54: Checking the status of ora.asm
    2011-04-14 13:24:59: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:59: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:59: Checking the status of ora.asm
    2011-04-14 13:25:04: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:25:04: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:25:04: Checking the status of ora.asm
    2011-04-14 13:25:09: The ora.asm resource is not ONLINE
    2011-04-14 13:25:09: Running as user grid: /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL
    2011-04-14 13:25:09: s_run_as_user2: Running /bin/su grid -c ' /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL '
    2011-04-14 13:25:10: Removing file /var/tmp/mbahSaGPn
    2011-04-14 13:25:10: Successfully removed file: /var/tmp/mbahSaGPn
    2011-04-14 13:25:10: /bin/su successfully executed
    2011-04-14 13:25:10: Succeeded in writing the checkpoint:'ROOTCRS_BOOTCFG' with status:FAIL
    2011-04-14 13:25:10: ###### Begin DIE Stack Trace ######
    2011-04-14 13:25:10: Package File Line Calling
    2011-04-14 13:25:10: --------------- -------------------- ---- ----------
    2011-04-14 13:25:10: 1: main rootcrs.pl 322 crsconfig_lib::dietrap
    2011-04-14 13:25:10: 2: crsconfig_lib crsconfig_lib.pm 6465 main::__ANON__
    2011-04-14 13:25:10: 3: crsconfig_lib crsconfig_lib.pm 6390 crsconfig_lib::perform_initial_config
    2011-04-14 13:25:10: 4: main rootcrs.pl 671 crsconfig_lib::perform_init_config
    2011-04-14 13:25:10: ####### End DIE Stack Trace #######
    2011-04-14 13:25:10: 'ROOTCRS_BOOTCFG' checkpoint has failed
    So this must be a bug. During root.sh execution ora.asm is OFFLINE but after failing it is ONLINE. It maight be a question of waiting/repeating or timeout as I see the "Checking the status of ora.asm" command is repeated several times during root.sh, but not enough perhaps. Now root.sh is failed, installation halted but ASM is ONLINE.
    Any other Idea?
    Thanks again.

  • Error - convert single node-RAC-ConvertTomydb.xml -

    my single node init.ora file:
    # Copyright (c) 1991, 2001, 2002 by Oracle Corporation
    # Cache and I/O
    db_block_size=8192
    db_file_multiblock_read_count=16
    # Cursors and Library Cache
    open_cursors=300
    # Database Identification
    db_domain=""
    db_name=mydb
    # Diagnostics and Statistics
    background_dump_dest=/u01/app/oracle/admin/mydb/bdump
    core_dump_dest=/u01/app/oracle/admin/mydb/cdump
    user_dump_dest=/u01/app/oracle/admin/mydb/udump
    # File Configuration
    control_files=("/u01/app/oracle/oradata/mydb/control01.ctl", "/u01/app/oracle/oradata/mydb/control02.ctl", "/u01/app/oracle/oradata/mydb/control03.ctl")
    # Job Queues
    job_queue_processes=10
    # Miscellaneous
    compatible=10.2.0.1.0
    # Processes and Sessions
    processes=150
    # SGA Memory
    sga_target=1083179008
    # Security and Auditing
    audit_file_dest=/u01/app/oracle/admin/mydb/adump
    remote_login_passwordfile=EXCLUSIVE
    # Shared Server
    dispatchers="(PROTOCOL=TCP) (SERVICE=mydbXDB)"
    # Sort, Hash Joins, Bitmap Indexes
    pga_aggregate_target=360710144
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    undo_tablespace=UNDOTBS1
    my ConvertTomydb.xml ------------which is copy of ConvertToRAC.xml file
    <?xml version="1.0" encoding="UTF-8" ?>
    - <n:RConfig xmlns:n="http://www.oracle.com/rconfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/rconfig">
    - <n:ConvertToRAC>
    - <!-- Verify does a precheck to ensure all pre-requisites are met, before the conversion is attempted. Allowable values are: YES|NO|ONLY
    -->
    - <n:Convert verify="ONLY">
    - <!-- Specify current OracleHome of non-rac database for SourceDBHome
    -->
    <n:SourceDBHome>/u01/app/oracle/product/10.2.0/db_1</n:SourceDBHome>
    - <!-- Specify OracleHome where the rac database should be configured. It can be same as SourceDBHome
    -->
    <n:TargetDBHome>/u01/app/oracle/product/10.2.0/db_1</n:TargetDBHome>
    - <!-- Specify SID of non-rac database and credential. User with sysdba role is required to perform conversion
    -->
    - <n:SourceDBInfo SID="mydb">
    - <n:Credentials>
    <n:User>sys</n:User>
    <n:Password>oracle</n:Password>
    <n:Role>sysdba</n:Role>
    </n:Credentials>
    </n:SourceDBInfo>
    - <!-- ASMInfo element is required only if the current non-rac database uses ASM Storage
    -->
    - <n:ASMInfo SID="+ASM1">
    - <n:Credentials>
    <n:User>sys</n:User>
    <n:Password>oracle</n:Password>
    <n:Role>sysdba</n:Role>
    </n:Credentials>
    </n:ASMInfo>
    - <!-- Specify the list of nodes that should have rac instances running. LocalNode should be the first node in this nodelist.
    -->
    - <n:NodeList>
    <n:Node name="linux1" />
    <n:Node name="linux2" />
    </n:NodeList>
    - <!-- Specify prefix for rac instances. It can be same as the instance name for non-rac database or different. The instance number will be attached to this prefix.
    -->
    <n:InstancePrefix>mydb</n:InstancePrefix>
    - <!-- Specify port for the listener to be configured for rac database.If port="", alistener existing on localhost will be used for rac database.The listener will be extended to all nodes in the nodelist
    -->
    <n:Listener port="1521" />
    - <!-- Specify the type of storage to be used by rac database. Allowable values are CFS|ASM. The non-rac database should have same storage type.
    -->
    - <n:SharedStorage type="ASM">
    - <!-- Specify Database Area Location to be configured for rac database.If this field is left empty, current storage will be used for rac database. For CFS, this field will have directory path.
    -->
    <n:TargetDatabaseArea>+ORCL_DATA1</n:TargetDatabaseArea>
    - <!-- Specify Flash Recovery Area to be configured for rac database. If this field is left empty, current recovery area of non-rac database will be configured for rac database. If current database is not using recovery Area, the resulting rac database will not have a recovery area.
    -->
    <n:TargetFlashRecoveryArea>+FLASH_RECOVERY_AREA</n:TargetFlashRecoveryArea>
    </n:SharedStorage>
    </n:Convert>
    </n:ConvertToRAC>
    </n:RConfig>
    Ran the xml file
    $ rconfig ConvertTomydb.xml
    Got this below error.
    [oracle@linux1 bin]$ sh rconfig ConvertTomydb.xml
    <?xml version="1.0" ?>
    <RConfig>
    <ConvertToRAC>
    <Convert>
    <Response>
    <Result code="1" >
    Operation Failed
    </Result>
    <ErrorDetails>
    Clusterware is not configured
    </ErrorDetails>
    </Response>
    </Convert>
    </ConvertToRAC></RConfig>
    [oracle@linux1 bin]$
    Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/rconfig.log
    [main] [0:14:4:4] [RuntimeExec.runCommand:175] Returning from RunTimeExec.runCommand
    oracle.ops.mgmt.cluster.RemoteShellException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
    linux2.com: Connection refused
         at oracle.ops.mgmt.nativesystem.UnixSystem.checkRemoteExecutionSetup(UnixSystem.java:1880)
         at oracle.ops.mgmt.nativesystem.UnixSystem.getRemoteShellCmd(UnixSystem.java:1634)
         at oracle.ops.mgmt.nativesystem.UnixSystem.createCommand(UnixSystem.java:614)
         at oracle.ops.mgmt.nativesystem.UnixSystem.removeFile(UnixSystem.java:622)
         at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1352)
         at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
         at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
         at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
         at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
         at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
         at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
         at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
         at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
         at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
         at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
         at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
         at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
         at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
         at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
         at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
    [main] [0:14:4:16] [UnixSystem.isSharedPath:1356] UnixSystem.isShared: creating file /u01/app/oracle/product/10.2.0/db_1/CFSFileName126249561289258204.tmp
    [main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1817] checkRemoteExecutionSetup:: Checking user equivalence using Secured Shell '/usr/bin/ssh'
    [main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1819] checkRemoteExecutionSetup:: Running Unix command: /usr/bin/ssh -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -o NumberOfPasswordPrompts=0 linux2 /bin/true
    oracle.ops.mgmt.cluster.SharedDeviceException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
    linux2.com: Connection refused
         at oracle.ops.mgmt.nativesystem.UnixSystem.testCFSFile(UnixSystem.java:1444)
         at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1402)
         at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
         at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
         at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
         at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
         at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
         at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
         at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
         at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
         at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
         at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
         at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
         at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
         at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
         at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
         at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
    [main] [0:14:35:152] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [0:14:35:152] [UnixSystem.getCSSConfigType:1985] configFile=/etc/oracle/ocr.loc
    [main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrconfig_loc props.val=/u02/oradata/orcl/OCRFile propValue=/u02/oradata/orcl/OCRFile
    [main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrmirrorconfig_loc props.val=/u02/oradata/orcl/OCRFile_mirror propValue=/u02/oradata/orcl/OCRFile_mirror
    [main] [0:14:35:157] [Utils.getPropertyValue:292] propName=local_only propValue=FALSE
    [main] [0:14:35:157] [UnixSystem.getCSSConfigType:2029] configType=false
    [main] [0:14:35:158] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [0:14:35:168] [OCRTree.init:201] calling OCRTree.init
    [main] [0:14:35:169] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [0:14:35:177] [OCRTree.<init>:157] calling OCR.init at level 7
    [main] [0:14:35:177] [HASContext.getInstance:190] Module init : 24
    [main] [0:14:35:177] [HASContext.getInstance:214] Local Module init : 0
    [main] [0:14:35:177] [HASContext.getInstance:249] HAS Context Allocated: 4 to oracle.ops.mgmt.has.ClusterLock@f47bf5
    [main] [0:14:35:177] [ClusterLock.<init>:60] ClusterLock Instance created.
    [main] [0:14:35:178] [OCR.getKeyValue:411] OCR.getKeyValue(SYSTEM.local_only)
    [main] [0:14:35:178] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
    [main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 6
    [main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: value is [false] dtype = 3
    [main] [0:14:35:179] [OCRTreeHA.getLocalOnlyKeyValue:1697] OCRTreeHA localOnly string = false
    [main] [0:14:35:180] [HASContext.getInstance:190] Module init : 6
    [main] [0:14:35:180] [HASContext.getInstance:214] Local Module init : 0
    [main] [0:14:35:180] [HASContext.getInstance:249] HAS Context Allocated: 5 to oracle.ops.mgmt.has.Util@f6438d
    [main] [0:14:35:180] [Util.<init>:86] Util Instance created.
    [main] [0:14:35:180] [has.UtilNative.Native] prsr_trace: Native: hasHAPrivilege
    [main] [0:14:35:184] [HASContext.getInstance:190] Module init : 56
    [main] [0:14:35:184] [HASContext.getInstance:214] Local Module init : 32
    [main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: allocHASContext
    [main] [0:14:35:184] [has.HASContextNative.Native]
    allocHASContext: Came in
    [main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: prsr_initCLSR
    [main] [0:14:35:185] [has.HASContextNative.Native]
    allocHASContext: CLSR context [1]
    [main] [0:14:35:185] [has.HASContextNative.Native]
    allocHASContext: retval [1]
    [main] [0:14:35:185] [HASContext.getInstance:249] HAS Context Allocated: 6 to oracle.ops.mgmt.has.ClusterAlias@18825b3
    [main] [0:14:35:185] [ClusterAlias.<init>:85] ClusterAlias Instance created.
    [main] [0:14:35:185] [has.UtilNative.Native] prsr_trace: Native: getCRSHome
    [main] [0:14:35:186] [has.UtilNative.Native] prsr_trace: Native: getCRSHome crs_home=/u01/app/oracle/product/10.2.0/crs(**)
    [main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1328] DATABASE.ASM.linux1.+asm1 does exist
    [main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1329] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
    [main] [0:14:35:280] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
    [main] [0:14:35:281] [OCR.getKeyValue:411] OCR.getKeyValue(DATABASE.ASM.linux1.+asm1.ORACLE_HOME)
    [main] [0:14:35:281] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
    [main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 36
    [main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: value is [u01/app/oracle/product/10.2.0/db_1] dtype = 3
    [main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1346] getASMInstanceOracleHome:ohome=/u01/app/oracle/product/10.2.0/db_1
    [main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1367] Releasing shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
    [main] [0:14:35:282] [has.ClusterLockNative.Native] prsr_trace: Native: unlock
    [main] [0:14:35:802] [nativesystem.OCRNative.Native] keyExists: procr_close_key retval = 0
    [main] [0:14:35:802] [ASMTree.getNodes:1236] DATABASE.ASM does exist
    [main] [0:14:35:802] [ASMTree.getNodes:1237] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM
    [main] [0:14:35:802] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
    [main] [0:14:35:803] [OCR.listSubKeys:615] OCR.listSubKeys(DATABASE.ASM)
    [main] [0:14:35:803] [nativesystem.OCRNative.Native] listSubKeys: key_name=[DATABASE.ASM]
    [main] [0:14:35:809] [GetASMNodeListOperation.run:78] Got nodes=[Ljava.lang.String;@11a75a2
    [main] [0:14:35:809] [GetASMNodeListOperation.run:91] result status 0
    [main] [0:14:35:809] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
    [main] [0:14:35:810] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
    [main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
    [main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
    [main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
    [main] [0:14:35:858] [ASMInstance.setBestDiskGroup:1422] sql to be executed:=select name from v$asm_diskgroup where free_mb= (select max(free_mb) from v$asm_diskgroup)
    [main] [0:14:35:864] [ASMInstance.setBestDiskGroup:1426] Setting best diskgroup....
    [main] [0:14:35:888] [SQLEngine.doSQLSubstitution:2165] The substituted sql statement:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
    [main] [0:14:35:888] [ASMInstance.setTemplates:1345] sql to be executed:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
    [main] [0:14:35:892] [ASMInstance.setTemplates:1349] Getting templates for diskgroup: oracle.sysman.assistants.util.asm.DiskGroup@170888e
    [main] [0:14:35:892] [ASMInstance.setTemplates:1357] template: PARAMETERFILE
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DUMPSET
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DATAGUARDCONFIG
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: FLASHBACK
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: CHANGETRACKING
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: XTRANSPORT
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: AUTOBACKUP
    [main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: BACKUPSET
    [main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: TEMPFILE
    [main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: DATAFILE
    [main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ONLINELOG
    [main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ARCHIVELOG
    [main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: CONTROLFILE
    [main] [0:14:35:894] [ASMInstance.createUtilASMInstanceRAC:113] Diskgroups loaded
    [main] [0:14:35:894] [LocalNodeCheck.checkLocalNode:107] Performing LocalNodeCheck
    [main] [0:14:35:894] [OracleHome.getNodeNames:270] inside getNodeNames
    [main] [0:14:36:116] [OracleHome.isClusterInstalled:252] bClusterInstalled=false
    [main] [0:14:36:120] [Step.execute:251] STEP Result=Clusterware is not configured
    [main] [0:14:36:121] [Step.execute:280] Returning result:Operation Failed
    [main] [0:14:36:121] [RConfigEngine.execute:67] bAsyncJob=false
    [main] [0:14:36:124] [RConfigEngine.execute:76] Result=<?xml version="1.0" ?>
    <RConfig>
    <ConvertToRAC>
    <Convert>
    <Response>
    <Result code="1" >
    Operation Failed
    </Result>
    <ErrorDetails>
    Clusterware is not configured
    </ErrorDetails>
    </Response>
    </Convert>
    </ConvertToRAC></RConfig>
    Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/mydb/sqllog
    MYDB     mydb                    2622254467
    10.2.0.1.0     ACTIVE
    cluster_database                                        FALSE
    undo_management                                         AUTO
    db_domain
    dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
    background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
    user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
    core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
    audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
    MYDB     mydb                    2622254467
    10.2.0.1.0     ACTIVE
    cluster_database                                        FALSE
    undo_management                                         AUTO
    db_domain
    dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
    background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
    user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
    core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
    audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
    MYDB     mydb                    2622254467
    10.2.0.1.0     ACTIVE
    cluster_database                                        TRUE
    undo_management                                         AUTO
    db_domain
    dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
    background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
    user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
    core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
    audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
    MYDB     mydb                    2622254467
    10.2.0.1.0     ACTIVE
    cluster_database                                        TRUE
    undo_management                                         AUTO
    db_domain
    dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
    background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
    user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
    core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
    audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
    MYDB     mydb                    2622254467
    10.2.0.1.0     ACTIVE
    cluster_database                                        TRUE
    undo_management                                         AUTO
    db_domain
    dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
    background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
    user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
    core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
    audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
    Please help me where I am making mistake.
    Thanks

    1) I have created single node standard database called mydb in /u01/app/oracle/product/10.2.0/db_1 home (hostname linux1)
    2) installed crs and asm on linux1 and linux2 and shared storag on ASM(which external HD running ieee1294 cards and ports) . no database is created on linux1 or linux2
    3) I want to convert mydb to RAC DATABASE called mydb1 instance on linux1 and mydb2 on linux2 machine respectively.
    4) copied and modifed xml as you see above called ConvertTomydb.xml to $ORACLE_HOME/bin directory
    5) when I run
    $rconfig ConvertTomydb.xml from $ORACLE_HOME/bin directory , i get the following error
    <ConvertToRAC>
    <Convert>
    <Response>
    <Result code="1" >
    Operation Failed
    </Result>
    <ErrorDetails>
    Clusterware is not configured
    </ErrorDetails>
    </Response>
    </Convert>
    </ConvertToRAC>
    $
    Please see my crs_stat -t command output
    Name Type Target State Host
    ora....SM1.asm application ONLINE ONLINE linux1
    ora....X1.lsnr application ONLINE ONLINE linux1
    ora.linux1.gsd application ONLINE ONLINE linux1
    ora.linux1.ons application ONLINE ONLINE linux1
    ora.linux1.vip application ONLINE ONLINE linux1
    ora....SM2.asm application ONLINE ONLINE linux2
    ora....X2.lsnr application ONLINE ONLINE linux2
    ora.linux2.gsd application ONLINE ONLINE linux2
    ora.linux2.ons application ONLINE ONLINE linux2
    ora.linux2.vip application ONLINE ONLINE linux2
    ora.orcl.db application ONLINE ONLINE linux1
    ora....l1.inst application ONLINE ONLINE linux1
    ora....l2.inst application ONLINE ONLINE linux2
    ora....test.cs application ONLINE ONLINE linux1
    ora....cl1.srv application ONLINE ONLINE linux1
    ora....cl2.srv application ONLINE UNKNOWN linux2
    please see the output from olsnodes command
    [oracle@linux1 bin]$ olsnodes
    linux1
    linux2
    [oracle@linux1 bin]$
    What is your cache fusion interconnect strategy?
    I don't about this, please let me know where can i find the answers. what kind of command do i have to use get the answer
    damorgan , Please let me know, if I gave answers to your questions. if not please let me know, i can give as much as possible. i really appreciate for your help
    Thanks

  • Upgrade FP2.2.1 to FP2.4 single-node on WLS fails (FPCheckSOAServerStatus)

    Hi All,
    Issue: Upgrade from FP2.2.1 to FP2.4
    Issue: java.io.FileNotFoundException: /apps/aiahome2/Infrastructure/install/scripts/FPCheckSOAServerStatus.xml (No such file or directory)
    We're trying to upgrade a single-node Development Environment from FP2.2.1 to FP2.4 on WLS 9.2 MP3 running RedHat 4.
    First time, the upgrade failed it complained that it couldn't write to log-file $AIA_HOME/logs/Install/FP/FPInstall.log since the directory $AIA_HOME/logs/Install/FP didn't exists. We created the directory manually and tried again.
    Second time it failed, the serveroutput shows Build Failed.
    BUILD FAILED
    /apps/aiahome2/Infrastructure/install/scripts/FPInstall.xml:94: exec returned: 1
    Total time: 3 seconds
    09/16/2009 12:10 AM : ERROR: Error executing the command:
    setenv PATH /apps/aiahome2/apache-ant-1.7.0/bin:/apps/product/10.1.3.1/OracleAS_2/jdk/bin:$PATH &&
    setenv ANT_HOME /apps/aiahome2/apache-ant-1.7.0 &&
    setenv JAVA_HOME /apps/product/10.1.3.1/OracleAS_2/jdk && setenv DEPLOY_COMP oracle.aia.common &&
    setenv ORACLE_HOME /apps/product/10.1.3.1/OracleAS_2 &&
    setenv AIA_HOME /apps/aiahome2&&
    setenv BPEL_HOME /apps/product/10.1.3.1/OracleAS_2/bpel &&
    cd /apps/aiahome2/Infrastructure/install/scripts && ant --noconfig -buildfile FPInstall.xmlIf I read the whole log correctly, the installer was successful (dumped all the files in the correct location), but not the configuration.
    ==> The $AIA_HOME/logs/Install/FP/FPInstall09162009-001043.log shows:
    bash-3.00$ more FPInstall09162009-001043.log
    InstallAIAFP:
    BUILD FAILED
    /apps/aiahome2/Infrastructure/install/scripts/FPInstall.xml:115: The following error occurred while executing this line:
    java.io.FileNotFoundException: /apps/aiahome2/Infrastructure/install/scripts/FPCheckSOAServerStatus.xml (No such file or directory)
    Total time: 0 secondsThe directory listed above, does not have that FPCheckSOAServerStatus.xml file. We even did a "find..." on the installation directory but could not find the missing file.
    Have anyone seen anything similar? I've searched Metalink and Internet, but with no result for that missing file etc.
    Just a note: When executing the FP2.4 Installer, we had to set Execute rights on three-four shell scripts in order to start the Installer.
    Any help is highly appreciated.
    Regards,
    Martin

    Hello Martin !
    Upgrade of FP 2.2.1 to 2.4 is not supported on Weblogic. Could you get in touch with me and [email protected] offline.
    Thanks
    -Teja

  • Can ASM be used in single node 11g?

    I tried to create DB in 11g using ASM, but I was asked to create oracle CSS services (which is for RAC). of course it failed. My platform is oracle linux 5. As I remember 10g can use ASM (in Solaris), any one has idea about 11g? how to use ASM (not RAC)? (I already used ASM in RAC 11g)
    Thank you in advance.

    Although this is for Oracle 10gR2, here's a web page that might shed some light on your situation: Note that is says CSS is created automatically even if you don't use it.
    http://download-west.oracle.com/docs/html/B10130_02/deinstall.htm#BCFBEEAJ
    6.2 Removing Oracle Cluster Synchronization Services (CSS)
    The first time you install Oracle Database, Oracle Universal Installer configures and starts a single-node version of the Oracle Cluster Synchronization Services (CSS) service. The CSS service enables synchronization between an Automatic Storage Management (ASM) instance and the database instances that rely on it for database file storage. It is configured and started even if you do not choose Automatic Storage Management as a storage mechanism for database files.
    If you do not choose Automatic Storage Management as a storage option, you can delete OracleCSService. To delete this service without deleting the Oracle home, perform the following:

  • How to change from single Node to RAC for AIA

    Recently I have installed AIA 11.1.1.5, but during installation I selected single node. But now I would like to configure it to use RAC. How to do it? Reinstalling is not an option.

    Hi,
    Hope this helps
    http://proskudin.blogspot.com/2007/06/two-level-tabs.html
    Br,Jari

Maybe you are looking for

  • How to run a Jar file during runtime

    Runtime.getRuntime().exec("javaw -jar MYJAR.jar");was what I used to run the jar originally, and it worked. Recently I created an installer for my program, where the user runs a batch-file shortcut which launches the main application. Because the mai

  • Best way to programmatically test opening a pdf

    My company, among other things, uses an image processing library to do complex conversions of various types of content ... including pdfs. Sometimes, this library fails and we are looking for a way to, offline, automate the process of checking whethe

  • I was trying to give my old iphone 4 to my friend and I can't restore it.

    I was attempting to give my friend my old at&t iphone 4 but after trying to remember my old password I disabled the phone. I was told to just restore it but I can't get itunes to pick up the phone to restore it. I tried to force it into recovery mode

  • Question regarding reporting

    hi I  am creating one report for g/l for that report i want to add a characterstics and keyfigure's but in this keyfigur some of the infoobject start form 0  that i know it is sap standard Key fig                                                      

  • How can i retrieve deleted photos from my iphone 5c

    how can i retrieve deleted photos from my iphone 5c.