Single Outlook mailbox for multiple users on the same PC

please now see below.
Thanks

Guys, I think I may have figured a very simple work around, which at first glance appears to be working.
And I can't believe that i'm the only person in the world done this ???
1. Configure email account/s as normal.
2. Create a folder in the root of C and name it some thing obvious like "Outlook-Share", and give all PC users full access.
3. Rename outlooks "Personal Folder", something obvious like "Shared Email", then move the PST file to the "Outlook-Share" folder.
4. Open outlook and when it moans about not being able to find the .pst, navigate to "Outlook-Share"
Close Outlook.
5. Using Office Tools "Save my settings wizzard", save the office settings to the "Outlook-Share" folder.
6. Log in as the new user, and use the "Save my settings wizzard" to restore office settings to this user profile.
This PC is not yet on the internet, as I'm on a development domain, but i created a mail in User1 profile which is sitting in the outbox waiting to go.
I then logged in as User2, and could see the mail waiting in the outbox. I created another email and sent this to the outbox.
Logged in as User2 and can now see 2 emails in the outbox.

Similar Messages

Find my Friends : Support for multiple users under the same Apple ID?

Can multiple users under the same Apple ID use the app to find each other? My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time. If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
This worked for me.

Outlook autocomplete cache stops working for multiple users at the same time

Hi there
Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
Anyone out there able to help?
Thanks!
/Anders

Hi ,
Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
that legacy dn value.
For the external recipients exchange user the smtp address to get it delivered.
For your issue :
Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
How to convert NDR to x500 address format :
http://msexchangeguru.com/2012/03/15/x500/
How to avoid getting such kind of NDR'S :
https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
In case if you don't want the users to use the autocomplete cache when composing the new emails :
In group policy we can use the office templates to disable the below mentioned option.
1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
1.Empty autocomplete cache.
Please reply me if anyhitng is unclear.
Thanks & Regards S.Nithyanandham

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Can I use FCX for multiple users on the same machine?

I have one mac pro, and two video cmpanies. I have two users on my machine and would like to set up two different final cut x workplatforms. Is that possible?

Of course, you can use FCP X from two different user accounts on your machine. The question here, I believe, is how to separate the content that each user accesses.
One obvious way to achieve that would be to store the content in the system disk - that would put events and projects in each user's Movies folder. But that is a bad option, for performance reasons, and more.
You could have separate external disks for each user to store his content.
Also, you could use different disk images which could, say, be all stored in the same internal (but not system) drive.

How do I customize firefox for multiple users on the same device?

Sometimes my wife uses my computer to surf the web. I'd like to have it set up so she can have her bookmarks, etc. when she's using it and I can have mine when I'm using it. Is this possible? If so how do I do it?

hello arack, the easiest way would be to create different user accounts for you both on the mac on the level of the operating system: [[How do I share Firefox between people on a computer?]]
or you could use the firefox profile manager to create separate profiles: [[Use the Profile Manager to create and remove Firefox profiles]]

ITunes access for multiple users on the same Apple

I think I'm really done myself in for the fist time with my iMac. I have decided instead of sharing a single log-in with my girlfriend, to get her her own. This is working out great, but I'm come to a halt in trying to get her access to our music on iTunes. I read the article on the Apple Support website that clearly explains how to do this, I also read Kay and Bert's message thread which I thought would be of help to no avail.
I've copied my iTunes folder into user/shared then opened iTunes/preferences and connected iTunes the path to the new location. Done... but I can't see any of my music!! ... and I can't even see the music under my log-in. However, I can clearly see the files there in the user/shared folder. I'm starting to feel those "windows" days before I found Apple. Please help!
iMac G5 Mac OS X (10.4.6) iLife 06

I got my answers looking at another post. This individual was able to hit up a Genious Bar, something I had tried to schedule on the internet but was denied because I don't have the care plan. Here is the thread.
http://discussions.apple.com/message.jspa?messageID=2538248#2538248
Again, the Apple Discussion has saved the day.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Multiple users on the same ODI installation?

Hi all
is it possible to have multiple users working with the same odi installation? We have a virtualized IT infrastructure (citrix and wmware) where we can have multiple users on the same virtual instance. From our point of view, there is no licencing issue since we have a package covering literally everything.
One of the issues are the config files stored in the installation directory of odi (../bin). Is there a way to tell odi to store them in a different location, eg. the user home?
Thanks a lot
Benno

ODI looks in the current working directory for the configuration files, mostly you would have issues with the snps_login_work.xml and snps_login_security.xml files, but these may be common across all users. (just don't store the username/passwords for the ODI users in them).
The way ODI works, most of what are creating is stored in the repository anyway, it is only local GUI config stuff that may be stored locally.
Short answer, yes, you can, but might need to modify the config files a little to make it work.

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

Can i use my mac mini for some users at the same time?

can i use my mac mini for some users at the same time? i mean with their own screen, mouse, and keyboard

If you're asking whether more than one user can use the computer at the same time with multiple displays, the answer is no. Other users can log in over a network with Screen Sharing, but each one will need his own computer (not necessarily a Mac.)

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

How can multiple users use the same Creative Cloud Individual on one single-machine?

We have one shared graphics workstation, which is infrequently in use by different people - therefore we bought a single-workstation license (which we were referred to "Creative Cloud Individual"). In the FAQs it says it installs locally, but whenever a user different from the installing adminstrator logs in, he is forced to use the trial.
Is there a way to make the local installation usable on that single machine for multiple users?
Thanks in advance for your reply

Serenatasystems do the other users not have administrator access? What happens if they sign in using the Adobe ID tied to your Creative Cloud subscription? Do your Adobe Creative applications then exit trial mode?

Single Outlook mailbox for multiple users on the same PC

Similar Messages

Maybe you are looking for