Single Processing for CCTR entity type

Hi
I want to create cost center using single processing .
Steps followed for this as below
Create Blank CR with CR Type OG_S003 (With Entity Type CCTR) with deselected single processing check box under Create Change Request link. CR is created for entity type CCTR and CR Type as OG_S003.
Try to create cost center under Single processing by selecting Entity Type Cost Center,Proper Edition,Controlling Area and Cost Center value to be created it fives me error as no change request assigned to you.
Here my question is there is already CR for cost center then why SAP gives me error?
When I try to create Blank CR with CR Type OG_W003 (With Entity Type CCTR) with selected single processing check box under Create Change Request link.it gives me error at step no 3 ' 500 SAP Internal Error'
Is I am missing something?
I can able to create CC with same CR created as mentioned in point no 1 with cost center group as entity type but not for Cost Center as entity type.
Can anybody explain SAP logic behind this?

Hi Kiran
But when I try to create CR with CR TYPE OG_W003 under Link Create Change Request Type it gives me error at stage 3 (Changes) as per below
500 SAP Internal Server Error
ERROR: An exception has occurred
(termination: RABAX_STATE)
When I try with link Single Processing it gives me below error
No change request is assigned to you

Similar Messages

Single batch for multiple Valuation Type on same Plant

Hi,
Is it possible to have single batch for multiple valuation type on same Plant.
Regards

No you cannot have different valuation type for same batch of material for same plant.
Regards
Srinivas.P

IDoc processing for same message type but diff extensions

Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

Data model 0G: No authorization for entity type Account (Company Code) - activity Display

Hello Expert,
I have a problem with authorization in MDG-F.
I want to create Account with Collective processing. After, entered Entity type, Edition and Chart of account, Blocking message "Data model 0G: No authorization for entity type Account (Company Code) - activity Display" is displayed.
But, i checked in PFCG transaction, for this user profil, activity are : create or generate, Change and display. So, for me , it is correct.
Please, check screen shot below :
Blocking message :
and in PFCG transaction
Could you help me to solve this point?
Kind regards,
Heri RAOELISON

Hi Heri,
the system behavior is correct. The account in company code consists of three entity types:
1) COA - Chart of Accounts (Type 3)
2) ACCOUNT - Account (A-Segment, related to ECC table SKA1, Type 1)
3) ACCCCDET - Account in Company Code (B-Segment, releated to ECC table SKB1, Type 1).
3) includes 1) and 2) whereas 2) includes 1). If you grant authorization only for 3) but not for 1) and 2), you cannot do anything.
Best regards
Michael

Using a 2-D array Single Process Shared Variable w/ RT FIFO for comm between a Deterministic and non-deterministic loop on an RT Target

Our problem is that we currently use a 2D array to store CAN data on a Real-time Target. The array is 20 elements of 3 byte elements as so:
                0              1              2
0              [byte]   [byte]   [byte]
19           [byte]   [byte]   [byte]
These values are passed between a Deterministic Timed (DT) loop where they are set and a Non-Deterministic Timed (NDT) loop where they are read and passed into a Network Published Shared Variable (NPSV) for communication across the network to a Host PC. I have insrted an image for illustration, pardon the size.
Currently to pass the data between the DT and NDT loop we are using a Global Variable (GV). To improve the system we have attempted to replace these GVs with Single Process Shared Variables (SPSV) with an RT FIFO enabled.
To create the shared variable I simply right clicked the GV of interest and selected create Shared Variable Node form the drop downs. At this point LabVIEW presented me with a 2D NPSV within a new Library hosted on the RT Target. I then selected this new NPSV from the Project, changed it to a SPSV, and enabled a single element FIFO. This variable was initialized with a default value for the size described above and then used in our code for the DT to NDT communication, and conversion to a corresponding NPSV for sending to the Host.
When I went to run the code I noticed that the variable was in fact 2D, however its size was only 2 elements of three bytes each, in other words only two of the row indices were populated and the other appeared as uninitialized. in addition, this data had no resemblance to the set initilazation value. This was also how the variable was presented on the host side of the network after tranfer into a NPSV.
The peculiar part is that If I change this SPSV to a NPSV and then try to change it back, I receive an error saying the type is not supported for SPSV with an RT FIFO enabled. I have to disable the FIFO (which defeats the entire purpose) in order to successfully compile! I am unclear as to what is the bug in this case. Should I not be allowed to create the original 2D SPSV with a single element RT FIFO enabled without receiving an error? Or if this is okay how do I fix the problems associated with the variable after being allowed to create it?
I have found the following discussion in which a user states “The only limitations for custom controls is the ability to use it with RT FIFO enabled on a network-published shared variable”. Is this also true for SPSV? I have not found any documentation explicitely stating this for SPSV, though it is stated for the NPSVs.

Martin,
RT FIFOs don't support Multi-Dimensional Arrays, which would corroborate the issues you're seeing. You can break up the 2D array into 1D arrays by reshaping the array, then you'll be able to use the RT FIFO enabled variable, just set the array size to the total number of elements (20*3 = 60).
You can also pass the 2D array via pre-allocated queue, or using a Functional Global. We have a reference example for a circular buffer using Functional Globals here.

Single Report for production scrap and Movement type 551 scrap

Hi All,
Can we include the scrap information from production and scrap from movement type 551 into a single BW report?.......My assumption is we cannot include it into a single report coz production scrap will have a different material information and scrap from movement type 551 will have a different material information..please correct me ig i am wrong......
Regards,
Shravani

hello,
you can have a single report by two options
1. have a variable on movement type.If you choose 551..U will get materials of tht movt type.
also if the select teh movt type for prodcution, it wil display its materials.
or
2. U have to place movt type in the rows.Place movt type and then material in the rows.
Then u will get for each movt type..its corresponding materials.No variable selection needed here.
Regards,
Dhanya

Processing of Sales order output type BA00 processes another Z output type for acknowledgement.

Hi Friends,
I am facing below mentioned issue and request your suggestion to solve it
Via processing of sales order output type BA00 another Z output type is processed and acknowledgment is sent to SAP inbox( sost).
This is working incase of manual addition of BA00 output type and via standard program " sd70av1a", but this functionality is not working when i am calling this standard program in a Z report via batch job.
with the below code-
DATA: name TYPE tbtcjob-jobname.
         DATA: number TYPE tbtcjob-jobcount.
         DATA: print_parameters TYPE pri_params.
         name = 'ORDER_PRINTING'.
         CLEAR: range1.
*REFRESH: range.
         range1-sign = 'I'.
         range1-option = 'EQ'.
         range1-low = 'BA00'.
*        range1-high = 'ZBA1'.
         APPEND range1 TO range.
         CALL FUNCTION 'JOB_OPEN'
           EXPORTING
             jobname          = name
           IMPORTING
             jobcount         = number
           EXCEPTIONS
             cant_create_job = 1
             invalid_job_data = 2
             jobname_missing = 3
             OTHERS           = 4.
         IF sy-subrc = 0.
           SUBMIT sd70av1a WITH rg_kschl IN range
                           WITH rg_vbeln IN order_tab
                           TO SAP-SPOOL
                           SPOOL PARAMETERS print_parameters
                           WITHOUT SPOOL DYNPRO
                           VIA JOB name NUMBER number
                           AND RETURN.
           IF sy-subrc = 0.
             CALL FUNCTION 'JOB_CLOSE'
               EXPORTING
                 jobcount             = number
                 jobname              = name
                 strtimmed            = 'X'
               EXCEPTIONS
                 cant_start_immediate = 1
                 invalid_startdate    = 2
                 jobname_missing      = 3
                 job_close_failed     = 4
                 job_nosteps          = 5
                 job_notex            = 6
                 lock_failed          = 7
                 OTHERS               = 8.
             IF sy-subrc <> 0.
             ENDIF.
           ENDIF.
         ENDIF.
       ENDIF.
In this case only BA00 is getting processed but Z output type created for sending acknowledgment is not triggered.
Please suggest how can i achieve the required functionality.
Thanks,
Surya

Solved myself..
Thanks.
Br,
Surya

Article IDoc not getting processed in PI for particle article type

Hello All,
I have an strange behaviour in my system.
i.e 1, we are creating an article IDOC by using BD10 for particulat article type.
2, IDOC created succesfully , then
3, Process the IDOC in BD87 to push the IDOC to PI system .
4, But i could not see the message in PI that too only for one article type.
I'm wondering why this is not getting processed only for one article type and not for others.
we also checked the basic filter for the message type in dist model and even i could not see any condition in PI also,
Is there any thing else i should check? can you please help us on this.
Regards , Sethu.

Hi,
Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
IDoc 0000000000181226 was saved but cannot or should not be sent
Regards,
Priyanka

Process single chq for Multiple Vendor Invoice and other Non-Vendor GL

Hello Experts,
Scenrio :
In most of the cases, Vendors of our client have the same Banks as that of our client. our client provides facilty to thier Vendors by depositing chqs in thier account upon due date.
Procedure :
I want to process a manual transaction (with a single chq for intra-bank transfer). the total amt on chq would be the total of selection of several invoices & some other payable GLs.
Query :
which T-Code should i use & how do i proceed.

Hi Hussein Merchant ,
For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
Go to FCH5 and assign manual single check here
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

How to export a whole process for a single image.

Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.

Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi

Call mode types: Synchronous and Asynchronous in ABAP process for a chain

Hello,
I have a doubt about the call mode type for a abap type process in a process chain. It has two options:
1.Synchronous
2.Asynchronous
Would like to know the diferences between these two; advantages and disadvantages of using them.
Thanks in advance for your help...
Regards,
Anuj

hi anuj,
pls refer the following link.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/eed63b54e56276e10000000a11402f/content.htm
hope it will help u to understand well the synchronous and asynchronous process chains call mode.
thanks

Processed TRs to be deleted from LB10(display TRs list for a storage type)

Dear all
Is it possible to delete already processed transfer requirements for a storage type in Transaction LB10?
Please guide me

Use LB02 as below:
Choose Logistics ® Logistics Execution ® Internal Warehouse Processes ® Transfer Requirement ® Change from the SAP menu.
Enter the warehouse number and the transfer requirement number. You can also enter the number of the item you want to delete.
From the initial screen, you have several options.
- To delete a transfer requirement, access the header screen by selecting Header. Then choose Transfer Requirement ® Delete from the Change Header menu bar.
- To delete one or more transfer requirement items, choose List of changes to access the screen where all the items are listed.
Choose Enter.
The system displays a list of all transfer requirement items.
- Select the items that you want to delete in the D column. To delete the items, choose Enter.
- You can also access a list of all transfer requirement items by choosing Item overview. Select the item to be deleted (for example, by moving the cursor to the item) from the list and choose Edit ® Delete item from the menu bar.
Regardless of the option you have chosen, the system displays a confirmation window.
To confirm the deletion, choose Yes.
If you have selected several items, the system displays a confirmation window for each item.
If the item is the only one in the transfer requirement, the system displays another window in which you confirm that you want to delete the transfer requirement

02 STO 's for a single process order

Hi All,
Can anyone explain me whether there any problem in getting two STO's for a single process order?
If its a problem how to generate only one STO for a one process order?

Hi Mallika,
can you explain your sceanrio . i am not able to understand your requirement.....
Regards,
Venkat.

Program name for E-mail processing routines for o/p type NEU

Hi Friends ,
What is the program name for E-mail processing routines for o/p type NEU for purchase order . This i want use this for send PO for vendor .
RB

Hi
Program SAPFM06P
Form Routine ENTRY_NEU
Form MEDRUCK
Transmission Medium - External Send

Finding Process Code for a message Type

Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITY

Hi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN     Auto- ID Idoc process
ED00                Display Idoc using work item
ED00_XML        Display idoc using work item (xml)
ED08                Forward idoc
ZABI_DLV_IN    Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod

Single Processing for CCTR entity type

Similar Messages

Maybe you are looking for