Single prompt for multiple reports in a webi doc

I have a webi document with three reports; each three has it's own query.
I want to apply a date prompt one each report; how do I create a prompt that could accept date value only once and apply on all three queries.
I tried to put the date prompt on each query separately and it prompts for all three; means I have to enter same date value three times.
Please advise.
Thanks

Hi Ahmed,
BO differentiate prompts on the basis of its definition.
You must use the same prompt definition in all the three queries to display it once while asking for the user response:
@Prompt('Text','A'\'D',{'Class\LOV Object'},mono\multi,free\constrained)
P.S.  you need to drag it separately in the 3 queries.
Regards,
Rohit

Similar Messages

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • Single logon for multiple reports in Hyperion Portal Insight

    Hyperion Portal Insight 8.3
    I have 3 reports that are to be migrated into Hyperion Insight. They are at
    present in Hyperion Explorer.
    It has a single login page where login information (user name and password) is
    captured and then the menu page opens up.
    In the menu page there are 3 links pointing to different dashboards,charts and
    results. Also, this login page is a seperate query and this query calls other 3
    reports and based on java script intelligence it passes on actual report
    name,dashboard name and also user authorization details.
    Now while migrating it onto Hyperion Portal insight, since it is web based -
    1. How can I have single logon for these 3 reports stored and passed onto other
    reports? since here the method for web sessions is OpenURL method.What do you
    suggest? how can I achieve this (java Script,AD,Seperate reports)? Please help.
    Thanks very much.
    R
    Edited by: user12056783 on 13-Oct-2009 15:45

    Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.

  • Prompt used as view selector for multiple reports

    Hi All,
    Can a dashboard prompt be used as View Selector for multiple reports? If yes, please let me know how?
    Thanks
    Sumita

    Hi Sumita,
    You can do this with Dashboard prompts, but it's a little tricky. I'll highlight the process below. Keep In mind I assume you have three reports already created and have three views: View 1, View 2 and View 3.
    Phase I: The Dashboard Prompt
    1. Create a new dashboard prompt.
    2. Add any single column to your prompt. It doesn't really matter which one (just make sure nothing is prompted on it to be safe).
    3. For the sake of this example, I'll assume we added column: "Test Folder"."Test Field"
    4. Make sure your Operator is "is equal to/is in"
    5. Make sure the control is "Drop-down List"
    6. Change the Show to "SQL Results"
    7. Write a SQL statement similar to the following (TEST =<your subject area>, "Test Folder"."Test Field" = <your column>):
    SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 1' END
    FROM TEST
    UNION
    SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 2' END
    FROM TEST
    UNION
    SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 3' END
    FROM TEST
    **Note: The reason why we need to do the CASE statement is because every logical query needs at least 1 presentation column. The case statement is a way to include the presentation column, but since the statement 1=2 is never true, we always use the ELSE condition.
    8. Set a presentation variable. Call it VIEW_PVAR
    9. Have the Prompt default to Specific Value: View 1
    10. Save the Dashboard Prompt and put it into the Dashboard with your reports.
    Phase II: Filter Reports
    1. Create a new Answer request
    2. Bring in your test column twice
    3. Change the formula (fx) on the second column to be: '@{VIEW_PVAR}{View 1}'
    4. Now add a filter to the presentation variable column
    5. Set the operator to "is equal to/is in' and set the value to: View 1
    6. Save the Request as "View 1 Filter"
    7. Change the value in the filter to: View 2
    8. Save the Request as "View 2 Filter"
    9. Change the value in the filter to: View 3
    10. Save the Request as "View 3 Filter"
    Phase III: Guided Navigation
    1. Create three sections in your dashboard
    2. Rename each section to: View 1, View 2 and View 3 respectively
    3. For each of the sections, do the following:
    3a. Click on properties
    3b. Click on Guided navigation
    3c. Set the Guided Navigation to the appropriate Filter report
    4. For each of the three sections, do the following:
    4a. Add in all three requests
    4b. Click on the request properties and select Show and the appropriate view for that section
    5. Save your changes to your Dashboard
    Good luck and if you found this post useful, please award points!
    Best regards,
    -Joe

  • Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

    Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
    Please help!!

    I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
    Add-PSSnapin "Microsoft.SharePoint.PowerShell"
    $sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
    $uri = new-object System.Uri("http://url/")
    $sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
    $sts.Update();
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Single-signon for multiple sites or sub sites

    Does anyone know of some good articles/publications or suggestions for
    implementing a single signon for multiple very secure internet sites in
    weblogic type environments.
    For example, bank1 has a internet site and bank 2 has an internet site.
    Bank 2 has some cool features they want to offer bank1's customers. They
    agree but, bank1 wants to present bank2 as a tab or part of bank1 site.
    IN order to do this there are lots of fun things, but the things Im
    interested in are how to authenticate between them and handle timeouts.
    timeouts seem particularly tricky in that if I dont hit a page on bank2
    for a while, it could time out its session for the guy on bank1. Also if
    im in the bank2 section of the site, then bank1 could time me out as
    well.
    any ideas let me know.
    thanks
    Joel

    I've been informed ;-) that a pure Java solution is also available from
    Entegrity. So here are a couple of URLs for you to research
    anagrammatically:
    http://www.netegrity.com
    http://www.entegrity.com
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol: How Weblogic applications are customized
    "Cameron Purdy" <[email protected]> wrote in message
    news:[email protected]...
    Netegrity?
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol: How Weblogic applications are customized
    "Tim Funk" <[email protected]> wrote in message
    news:[email protected]...
    This is long winded and I tried to have this make sense, if it doesn't
    just mark this as read ...
    I am running into the same issue. Out of need, different applications
    need to be hosted on different boxes/JVM's/web applications. I am
    experimenting with a customer single sign on process which is
    independent of Java but lends itself nicely to it. Here is my thoughts:
    1) All applications need to run under the same domain. For example:
    foo.redrose.net, www.redrose.net, bar.redrose.net, app1.redrose.net
    all reside under redose.net.
    2) You have a database table (secure) that contains the following:
    user id, password, session id, last access time.
    3) This database table contains all of the valid sessions across the
    domain (in this exmaple .redrose.net)
    4) There is a daemon running which runs every ?? seconds that deletes
    any records older than ?? seconds/(or minutes/hours) in the
    database.
    5) There exist a cookie which is set to the domain level that contains
    the session id.
    6) The session id provides a way to obtain the id and password for the
    user to authenticate to the container. For example in WL5.1SP8 there
    exists: weblogic.servlet.security.ServletAuthentication.weak(...) to
    authenticate to your container. By using this you will get the
    capability of setting up your roles and ACLS etc in you web.xml and
    weblogic.xml to handle authorization.
    7) All requests to any applications participating in this philosophy
    must do the following for EVERY request (or appropriate):
    Even if you are logged authenticated to the container and authorized,
    you may have timed out or logged out of another application. So the
    database table must be checked to see if the session id exists. At the
    same time, you must also update the last access time to prevent timeout.
    8) If the user tries to access a different application which he has not
    authenticated to yet - the user will be forwarded to a servlet whichwill:
    a) Look for the cookie at the domain level
    b) If the cookie is found - get the UID and PWD from database
    b2) Present login form if cookie is invalid/not exists
    c) Authenticate to container
    d) Forward back to original page and let the container handle
    authorization since you have already authenticated.
    I use have encapsulated the database activity into 3 stored functions:
    1) isValidSession(session_id) - Returns null or the user id and pwd
    concatentated which will need split apart if needed
    2) makeSession(user_id, password) - Returns a new unique session id and
    creates the appropriate record
    3) cleanUpSessions() - Arguements not yet determined. This will delete
    any records older than a certain time. I would like to have the proc
    know what to delete without being given a parameter but time to the
    second level can be tricky for some DBMS's.
    There is a concern of storing the user id and password in the database
    but this can be eliminated with a good design to restrict access to the
    database table and using encrypted connections.
    Hope this helps. Hopefully - a similar philosphy will be adopted by an
    application container so I may not have to worry about this and I can go
    back programming business functionality.
    -Tim
    Joel Nylund wrote:
    Does anyone know of some good articles/publications or suggestions for
    implementing a single signon for multiple very secure internet sites
    in
    weblogic type environments.
    For example, bank1 has a internet site and bank 2 has an internetsite.
    Bank 2 has some cool features they want to offer bank1's customers.They
    agree but, bank1 wants to present bank2 as a tab or part of bank1site.
    IN order to do this there are lots of fun things, but the things Im
    interested in are how to authenticate between them and handletimeouts.
    >>>
    timeouts seem particularly tricky in that if I dont hit a page onbank2
    for a while, it could time out its session for the guy on bank1. Alsoif
    im in the bank2 section of the site, then bank1 could time me out as
    well.
    any ideas let me know.
    thanks
    Joel

  • Variant for multiple reports

    Hi Experts,
    Does anyone know if it's possible to create variants that serve for multiple reports?  If so, how?
    I have 10 very similar reports which use the same selection screen defined in an include for all of them.
    Regards,
    Simon

    Hi,
    It is not possible to create variant for multiple reports as it is said as
    you must create a separate variant for each report and then save it with the report where the values will be used.
    refer this line in the link
    http://web.mit.edu/SAPR3/docs/webdocs/reports/rpRFvariant.html

  • Single invoice for multiple orders with different divisions

    Dear All,
    while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I  tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
    Thanks In advance
    Regards
    CNRNAIR

    Hello
    single invoice for multiple orders with "different divisions" invoice is getting split
    FYI - Different Division means different Sales Area.
    So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
    Thus, combining docs with different sales area is practically impossible.
    Provided, you are using common division.
    Hope this assist you,
    Thanks & REgards
    JP

  • Single invoice for multiple payment terms

    Hi Friends,
    I have given 2 different payment terms for 2 line items in single order and the billing is splitted due to this reason. I want to know where the system is checking this control. Because I want to create single Invoive even the payment terms are different. (The routine 003 under Data VBRK/VBRP in SO to Bill copy controls will be usefull only to create single Invoice for multiple SO's where the payment terms is same). But I need to create single Invoice even for multiple payment terms.
    Can anyone suggest me at the earliest please.
    Kumar

    Hi Kumar,
    The Billing Split is take care at Copy control level.
    For multiple line items in one single SO, with different Payment terms is not acceptable as per the  business logic and its not best practices.
    Please suggest the business to go on Split method only.
    Or
    Try to use Proforma Invoice Concept.
    Regards
    Srini

  • Single invoice for multiple deliveries in Export scenario

    Hi All
    I am trying to create a single invoice for multiple deliveries. In case of Local Sales i am able to do it.
    But when it comes to export sales the system is not allowing me to create Single invoice for 2 deliveries . This is a export scenario. Can you suggest... When  i am checking the split invoice log it says split due to header data "Number of foreign trade data i"
    Plz suggest.
    Thanks
    Rishi

    Thanks G. Lakshmipathi
    Resolved
    As per the split analysis, System was checking the number generated for Foreign Trade data at delivery level.
    As told  i have Tried maintaining the Indication at copy control level VTFL "Redetermination of Foreign Trade Data at Billing level".
    This has resolved my Issue.
    Thanks Again
    Rishi

  • Single invoice for Multiple Purchase Orders

    Hi,
    How to Park the single invoice for multiple purchase orders

    brother this is possible to enter one Invoice fro multiple purchase order.
    call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
    Thanks

  • Single spool for multiple smartforms

    Hi,
    I am using Function modules SSF_open and ssf_close for creating single spool for multiple smartforms but when i try to run the program in background then the job is getting cancelled...........and if i run the program in foreground then the program is running fine giving single spool for multiple forms........
    so the problem is that job should run in background if i run it in background instead job is getting cancelled.
    please tell me the solution how can i get the single spool for and multiple smartforms as well as the job should run if i am doing so.

    Moved to the correct forum

  • Reg:Single Check for Multiple Vendors

    Hi Experts,
    I want to Issue a Single check for all vendor open items...
    For this is I created one Group Key and assigned in the vendor master record, but while doing the payment separate check issuing for each vendor,
    any idea

    Hi,
    Can you check the below thread of urs.
    [Reg:Single Check for Multiple Vendors]
    In addition to the above, please make sure that in OBVU, the check box separate payment for each ref is deselected for your questioned comapny code.
    You would have continued your earlier thread instead, rather than a new thread.
    Thanks,
    Srinu

  • How to Park the single invoice for multiple purchase orders

    Hi,
    How to Park the single invoice for multiple purchase orders?

    brother this is possible to enter one Invoice fro multiple purchase order.
    call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
    Thanks

  • Single Receipt for multiple Customers

    We have a scenatio where there a multiple customer codes for different locations of the same customer. Say customer codes A B and C. A single receipt is received from the central processing location i.e. A and it contains invoices raised on all locations A B and C
    Entry cannot be passed through F-28 to enter and clear the open invoices.
    Is there a solution to this situation
    regards

    Hi,
    Through F-28 you can do multiple customer receipts with single receipt.  In the first screen of F-28, you have to give total amount received in the amount column then give first customer code then go to process open items select the open item, then choose process open items again it will ask for new customer code then give second customer code and process open items select open items in second customer this way you can process single receipt for multiple customers.
    Regards
    Sarma BH

Maybe you are looking for