Single record window

Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
The single record window is a modal dialog and there is no user pref recording the position and size.

It certainly seems like a bug to me - the window gets wider each time it is opened (regardless of whether you have resized it first) and it eventually gets wider than the screen. Thankfully it does start from it's previous size, so you can resize it down to keep it usable next time and it does reset when restarting SQL Developer, but it is another annoyance :(

Similar Messages

Single record view window increases !

Hi !
I use vesion 1.1.2.25-79.
Opening the single record view on an record of a table the window is of "normal" size. I enlarged it a little. to see more columns of the record.
From now on the window is increasing every time I open the "single record view".
A bug or feature ?
Regards,
Heinz

It certainly seems like a bug to me - the window gets wider each time it is opened (regardless of whether you have resized it first) and it eventually gets wider than the screen. Thankfully it does start from it's previous size, so you can resize it down to keep it usable next time and it does reset when restarting SQL Developer, but it is another annoyance :(

Non Database single record block, SAVE message issue

Hi,
Please help me to resolve it,
In Form I have single record block which is not based on table or view , I wrote Insert & update script in When-Button-press trigger for save button. It does update or save record but doesnt show any message which normally shows at the bottom of the form that 1 Rcord saved. How can I display that message?
Thanks
--Vijay

Either u can give some conditions in save button and give procedure_alert('Record Saved Successfully..').. It depends upon how u give the condition...
OR
in when new form instance trigger, u would have gave :SYSTEM.MESSAGE_LEVEL := '20'... delete this code...then the builder itself will show all the messages including insert and all at bottom of window....

In FCP. Trying to record voiceover. Go to Window, Record Audio, see the record window and FCP quits in about 2 seconds.

Trying to record audio voiceover. Go to Window, Select Record Audio, see the record window and FCP quits in about 2 seconds. Can't get started??

I think you've got the right driver selected, otherwise it wouln't work at all. The single most obvious thing to ask you though (I'm sorry if this is too basic) is where you have the pan controls set to? To get each mic to record on a single channel, you'd have to have one panned hard left and the other panned hard right. If you leave them both panned dead centre, that's exactly what you get - both mics on both channels.

Data Merge - Sets of Single Records?

I am trying to use data merge to fill in fields, only problem is I need 2 sets of 2 records on one page. I could possibly reformat this to work on one page, but I would still need 2 sets for each record. Also, I know I could probably just change the data to have 2 of each record, but assume the data is unable to be changed. If there is a way to make a text box a slave of another where it could mimic the original record, maybe I could do it that way, I just don't know if that is possible. See image below.
I am using InDesign CS3. Any ideas?

I don't think there's any way to do this directly, but it could be done in two steps using a script to get your two-up layout.
First, set up a page to hold only one record and do the two instances of the names as a single record per page.
Next, go to http://forums.adobe.com/message/1308215 and copy the rotatepage.js script into a plain text editor like notepad, and save withthe .js extension in the Scripts panel subdolder of the scripts folder in your user profile or user library. In Windows XP the path is \Documents and Settings\<user name>\Application Data\Adobe\InDesign\Version 5.0\Scripts\Scripts Panel and it will be similar in other operating systems.
To run the script, double-click it in the scripts panel. I Think it should run as is, but if it fails, make a new subfolder in the scripts panel folder called "Version 3.0 Scripts" (without the quotes) and move it into that, then try again. Waht this script does is make a PDF of the open file, then create a new file with rotated pages and places the PDF rotated into the new file. The primary use was for doing things like calendars, but it will work to give you spreads that you can print (by checking the spreads box in the print dialog) as two-up.

How to use execute query For a single record

Hi All,
I am working with oracle forms 10g, I have developed a custom form.
I the form user enter some data and click save in the menu and data get inserted into my table. Inside the insert statement i have hardcoded some values, Once data get inserted i cant able to see that values immediately in my text fields in my form.After requerying i can able to see the changes.
For example I have a text field called Status, and the field is display only field. At that time of insert i have hardcoded as "INCOMPLETE". Once the user enter the data in the form and click save the data get inserted in to my table but i cant able to see the status, after i requery my form i can able to see the status.
Here i do multi insert also.
This is my insert statement
BEGIN
First_Record;
LOOP
IF :BANK_GUARANTEE_BLK.CHECK_IN_OUT = 'Y'
THEN
XXBANK_GUARANTEE_HEADERS.XXBANK_GUARANTEE_INSERT;(this is my package, here i have written my insert statement)
--Execute_query;
END IF;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
END LOOP;
END;
If user insert only one row and i gave Execute_query to refresh and bring the current data, but when i use execute_query Its brings up all the datas in the table.
Can any one tell me how to avoid this and how to use execute_query for a single record.
Thanks &regards
Srikkanth

Solved,
The solution is
set_block_property('LC_REQ_BLK',ONETIME_WHERE,'LC_PO_NUMBER='||:LC_REQ_BLK.LC_PO_NUMBER);
go_block('LC_REQ_BLK');
execute_query;
Works fine.
Regards
Sri

How to insert sales text (MM02) into a single record of a Ztable.

Hi,
I'm extracting data from different data base tables and populating a Ztable which has Matnr as primary key and sales text as a field.
I have already used READ_TEXT to display the text and it is displayed in multiple records which in turn leads to duplication of Material numbers.
Now I want to avoid duplication of records (Matnr) as this being a primary record, and display the sales text of a particular material number into one single record.
Can anyone tell me how to insert sales text (MM02) transaction into one single record.
Thanks,
Govind

sorry i am not enough clear about your requirement...
as i can understand i am explaining to you.
suppose your itab contains repaeating matnr.
matnr
1
1
2
2
2
3
3
like this.
data : text(200),
matnr like mara-matnr.
loop at itab.
call READ_TEXT fnmodule.
loop at tline.
concatenate text tline-tdline into text.
endloop.
matnr = itab-matnr.
at end of matnr.
itab1-matnr = matnr.
itab1-text = text.
append itab1.
clear text.
endat.
endloop.
NB change the code as per your requirement
regards
shiba dutta

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

How can I map last of the repeating records into a single record?

I have a following input schema, I need to take only one of the <Student> records and map that to a single record in output. Doesn't matter if the first, second or last one of the records get mapped, I only need one in the output. Any idea how can
this be accomplished?
Input:
<Students>
<Student id="1">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="2">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="3">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
</Students>
Expected Output:
<Candidate>
<Student>
<Name>
A
</Name>
</Student>
</Candidate>

Sounds rather complex for something that could be done very simple in custom XSLT like this:
<?xml version="1.0" encoding="utf-16"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="Students">
<Candidate>
<Student>
<Name>
<xsl:value-of select="Student/Name" />
</Name>
</Student>
</Candidate>
</xsl:template>
</xsl:stylesheet>
Morten la Cour

Integrating number of records into a single record

Hi
I have a table where we store trainees with certifications, it stores trainees address, id, pass/fail flag, course codes, competetion date and certificate expiration date. WHat I need is to display a single record for each trainee in my query. In this case, what we have currently in the table is we might have 11 certificates for a trainee or 1 or maybe 5 etc. All I need is to display all his information, address, trainee id, courrse code..course code11 in a signle record. Is it possible and how? Please help

Try this one - it points to the same page and looks like it works:
Re: How to show the SELECT result in a certain form?

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

Sender File Adapter cannot send single record per message ?

Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name               MT_APINVOICE
Document Namespace          urn:file:jdbc:apivinvoice
Document Offset               8
Recordset Name               INPUT
Recordset Namespace
Recordset Structure                          RECORD,*
Recordset Sequence                          Ascending
Recordset per Message          1
Key Field Name
Key field Type               String
RECORD.fieldFixedLengths     10,5,10,10
RECORD.endSeparator     'nl'
RECORD.fieldNames          F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand

>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar

How can I add recording time to a single recording not a series recording?

If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.

Actually you can. It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

IDOC with Multiple Segment to One Single Record Mapping

Hello
I have a problem mapping the values of the segment <E1CSKTM>
which occurs two times in my source IDOC to a single record.
My requirement is to get one field (LTEXT) from the first E1CSKTM segment and map it to Name and take the same field (LTEXT) but from the second E1CSKTM segment and map it to OrgDescription
The source message:
<?xml version="1.0" encoding="UTF-8"?>
<COSMAS01>
   <IDOC BEGIN="1">
      <EDI_DC40 SEGMENT="1">
         <TABNAM>EDI_DC40</TABNAM>
         <MANDT>300</MANDT>
         <DOCNUM>0000000000750131</DOCNUM>
         <DOCREL>700</DOCREL>
         <STATUS>30</STATUS>
         <DIRECT>1</DIRECT>
         <OUTMOD>2</OUTMOD>
         <IDOCTYP>COSMAS01</IDOCTYP>
         <MESTYP>COSMAS</MESTYP>
         <STDMES>COSMAS</STDMES>
         <SNDPOR>SAPQAE</SNDPOR>
         <SNDPRT>LS</SNDPRT>
         <SNDPRN>QAE300</SNDPRN>
         <RCVPOR>SAPQAX</RCVPOR>
         <RCVPRT>LS</RCVPRT>
         <RCVPRN>QAX304</RCVPRN>
         <CREDAT>20080308</CREDAT>
         <CRETIM>090820</CRETIM>
         <SERIAL>20080211134325</SERIAL>
      </EDI_DC40>
      <E1CSKSM SEGMENT="1">
         <MSGFN>005</MSGFN>
         <MANDT>300</MANDT>
         <KOKRS>1000</KOKRS>
         <KOSTL>0105012501</KOSTL>
         <DATBI>99991231</DATBI>
         <DATAB>19000101</DATAB>
         <ERSDA>20060219</ERSDA>
         <USNAM>HAMEED</USNAM>
         <BKZER>X</BKZER>
         <BKZOB>X</BKZOB>
         <PKZER>X</PKZER>
         <MGEFL>X</MGEFL>
         <BUKRS>1000</BUKRS>
         <GSBER>20</GSBER>
         <KOSAR>N</KOSAR>
         <VERAK>TBA</VERAK>
         <WAERS>SAR</WAERS>
         <KHINR>105012001</KHINR>
         <KOMPL>X</KOMPL>
         <OBJNR>KS10000105012501</OBJNR>
         <PRCTR>0105012000</PRCTR>
         <FUNC_AREA>Z240</FUNC_AREA>
         <FUNC_AREA_LONG>Z240</FUNC_AREA_LONG>
         <E1CSKTM SEGMENT="1">
            <MSGFN>005</MSGFN>
            <SPRAS>A</SPRAS>
            <KTEXT>مدير الدائرة وموظفوه</KTEXT>
            <LTEXT>م. د. وموظفوه/ حسابات منطقة المدينة</LTEXT>
            <SPRAS_ISO>AR</SPRAS_ISO>
         </E1CSKTM>
         <E1CSKTM SEGMENT="1">
            <MSGFN>005</MSGFN>
            <SPRAS>E</SPRAS>
            <KTEXT>DvM and Stff/AOD-Mad.</KTEXT>
            <LTEXT>Div Mgr and Staff/AOD-Madinah</LTEXT>
            <SPRAS_ISO>EN</SPRAS_ISO>
         </E1CSKTM>
      </E1CSKSM>
   </IDOC>
</COSMAS01>
The Target Message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:CostElementMT xmlns:ns0="http://se.com.sa/materials">
   <INSERT>
      <COSTELEMENT_DATA action="INSERT">
         <TABLE>usmuser.OrganizationCodes_test</TABLE>
         <access>
            <OrgCode>105012001</OrgCode>
            <CostCenter>0105012501</CostCenter>
            <OrgDescription> English Name<OrgDescription/>
            <Name>Arabic Name</Name>
         </access>
      </COSTELEMENT_DATA>
   </INSERT>
</ns0:CostElementMT>
is this possible using the graphical mapping?

Hi Baheej,
If in your input "E1CSKTM" segment always occurs twice than u can go with the above UDF mentioned by Chirag and also u need to take care that field (LTEXT) also always occurs.If the field does not occur always than you need to check it using exists functions.
Andmoreover if the "E1CSKTM" segment does occur more than twice than u need to create a UDF where u need to pass the values alternatively.
Please check the above details and let us know if any furthur enhancements are to be made.
Thanks,
Bhargav
Note:Award Points if found useful.

Single record window

Similar Messages

Maybe you are looking for