Single repository - multiple runtimes

Hi.
We have a single development instance used by several global regions. This was done so that Repository objects could be shared (re-used) across regions.
This does pose a problem for the runtime though as it means our adapters have to make calls over wide area networks.
I was thinking that we could install the PI repository on a standalone java stack and then have several development environments (with their own runtimes) referencing this. It should not be too difficult to configure also. Some exchangeprofile changes, a few sm59 connections etc.
Any thoughts on this would be appreciated.
Thanks.
Rodney

Hi,
correct, you need to use different configurations.
For every configuration you can assign different locations to your targets and sources. The same works for the physical parameters, i.e. you may for instance use "enable parallel dml" on production but not on development. This means, if you change physical parameters and locations, you change them for the currently active configuration only.
This is called multi-configuration by oracle (you find a brief description in the owb user guide) and is new in 10R2.
We use one repository as design repository. We have different configurations for test, integration and production. For each configuration, we have different locations for our sources and targets. These are configured once. We select the appropiate configuration and deploy as usual.
Regards,
Carsten.

Similar Messages

Multiple physical connections on a single repository

Hi,
I have customers who have multiple databases, one for every location. This Databases are identical. So I want to create a single repository and the users from location 1 to see only his data and the users from location 2 to see only his data. Can anybody give me some instructions or documentation how to create the "Business Model and maping"
Thank you
Best regards
Nicolae Ancuta

Hi,
You can try the below mentioned approach.
1> You can create diffrent connection pools for diffrent sites and import the data to the physical layer.
2>DO the corresponding physical joins.
3>Drag and drop the diffrent subject areas formed in the physical layer to the BMM layer. This way you will have diffrent subject areas in the BMM layer as well.
4> You have to proceed the same way to create the complex joins in each of the subject areas.
5> Now you can create diffrent groups for the diffrent sites through
Manage---->Security------> Select Groups--------> Create new group
6> Now right click on the groups you have created and go to the properties.
7> In the General Tab select add and add the corresponding subject area which belong to the region.
8> Check the box next to the read permission.
9> This way you can add the subject areas to the corresponding groups.
This will help you setup your intended results.

Multiple Runtime Repositories

First let me explain my situation.
I have several projects and they all have similar sources and targets.
1) It appears I cannot use the same schema to hold runtime repository user for two different OWB Projects -- TRUE or FALSE?
2) I created another Runtime User for the new project, but have only one Runtime Repository Owner. This also appears to impossible as for some reason I'm unable to connect and run on this runtime. TRUE of FALSE?
3) DOes this mean I need a separate Runtime Repository Owner and Runtime User for every Project?
Thanks
Sridhar

Hey Sridhar, I love this True/False format but I will add some explanations for the extra credit ;-)
1. FALSE. Projects are just a grouping convenience at the design time. Projects have a many to many relationship to runtime repository, i.e. many projects can be deployed into the same runtime repository and the same project can be deployed into many runtime repositories. What is the symptom that make you think otherwise?
2. FALSE. Multiple Runtime Users can belong to the single Runtime Owner. The reason to have a Runtime User is security, it has very limited database privileges.
3. NO, as per above.
Nikolai Rochnik

Multiple runtime users for the same runtime

Hi,
Is there any GUI method to create multiple runtime users to access the same runtime repository ? Currently, we are running this script:
=============
grant WB_U_UII_OWB_REP9204 to &&rep_user;
grant WB_R_UII_OWB_REP9204 to &&rep_user;
grant WB_D_UII_OWB_REP9204 to &&rep_user;
grant WB_A_UII_OWB_REP9204 to &&rep_user;
==============
Is this the correct way of doing it ?
Thanks and regards,
Biswa.

Biswa,
No way to do this in UI other than the first time the runtime repository is created by the Runtime Assistant. However, as you correctly point out, granting the following 4 roles to any user is all it takes: WB_RT_X, where RT is the name of your Runtime Repository and X is A, D, R or U:
- The User role (U) gives select access to the public views in the runtime repository.
- The Developer role (D) gives execute access to the PL/SQL packages in the runtime repository required to perform deployment operations.
- The Runtime role (R) gives execute access to the PL/SQL packages in the runtime repository required to perform execution operations.
- The Admin role (A) gives execute access to the PL/SQL packages in the runtime repository required to perform administrative operations.
So you actually have some flexibility as to what exactly you want to allow the user to do.
Nikolai Rochnik

Creating multiple runtime access users in OWB

Hi,
Can anyone tell me how to create multiple runtime access users in OWB. Using Runtime Repository Assistant everytime i may have to create Runtime Repository schema for creating Runtime Access user.
Regards,
Kunal

We have 1 runtime repository and many runtime access users.
Please change the repository user and rauser
CREATE USER PMIRA
IDENTIFIED BY 'PASSWORD'
DEFAULT TABLESPACE TOOLS
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
GRANT CONNECT TO PMIRA;
GRANT WB_A_OWB101RR TO PMIRA;
GRANT WB_D_OWB101RR TO PMIRA;
GRANT WB_R_OWB101RR TO PMIRA;
GRANT WB_U_OWB101RR TO PMIRA;
ALTER USER PMIRA DEFAULT ROLE CONNECT;
ALTER USER PMIRA
QUOTA UNLIMITED ON TD10_WHS_SMALL_I01
QUOTA UNLIMITED ON TD10_WHS_SMALL_D01
QUOTA UNLIMITED ON TD10_ODS_SMALL_I01
QUOTA UNLIMITED ON TD10_ODS_SMALL_D01
QUOTA UNLIMITED ON TD10_STG_SMALL
QUOTA UNLIMITED ON CONVERSIE;

Single EAR multiple WAR model - faces-config not loading

Hi
I am deploying my application on weblogic 10.3 My application is in form of a Single-EAR-Multiple-WAR model. The application starts up correctly but when i bavigate from one module (WAR) to another (WAR), it doesnt initializes the managed beans. It is not able to load the faces-config from the second WAR.
can anyone please let me know ehat am i missing?
Thanks a lot
-Ankur

Hi,
This is not an issue caused by having multiple wars inside same ear.
This looks like a runtime exception when trying to render the jsp (The jsp is compiled to a sevlet and the inside the service method of the servlet you are getting this exception). Double check you jsp for the possible cause of this exception.
Thanks,
Gopinath Ramasamy

Insert pages from a single document multiple times

I'm trying to create a simple program that I can use to display PDF files that I can use to play at the piano. I perform often, and need to create "play lists" from which I can pull all, or part of, a PDF file containing music and display it.
I have it all working, except for one problem. I may need to "repeat" a section of a piece. I'm building up the play list by calling AcroPDDoc.InsertPages for each item in the play list. If a PDF file appears multiple times in the play list, when I call InsertPages, the call fails.
In this code snippet, pdDoc is the main doc to which I'm adding pages. playList is a generic List of my own PlayList objects, and I need to iterate through all the items in the playList except the first one, which is already loaded.
This code works great unless the fileName I specify has already been opened. The call to AcroPDDoc.Open succeeds just fine, but the call to pdDoc.InsertPages fails if the file has already had pages from it inserted. All other documents work fine. The documentation, of course, doesn't mention this.
        int insertPage = pdDoc.GetNumPages() - 1;
        for (int i = 1; i < playList.Count; i++)
          var newDoc = new AcroPDDoc();
          var item = playList(i);
          int startPage = 0;
          int endPage = 0;
          if (newDoc.Open(item.fileName))
            startPage = Math.Max(0, item.startPage);
            endPage = Math.Max(0, item.endPage);
            var totalPages = newDoc.GetNumPages;
            if (item.endPage < 0 || item.endPage > totalPages)
              endPage = totalPages - 1;
            int numPages = (endPage - startPage) + 1;
            if (pdDoc.InsertPages(insertPage, newDoc, startPage, numPages, 0))
              insertPage += numPages;
So, the questions:
1.) Is it possible to load pages from a single document multiple times?
2.) Is there a better way to do this? (That is, loop through a list of file names, starting and ending page numbers, and add the documents to an existing document.)
Any help appreciated! Thanks -- Ken

Hi Ken,
>The documentation, of course, doesn't mention this.
The documentation does not state explicitly that you can't insert pages again from a PDDoc you open again and never close.
But it mentions that you get references only from an already opened PDDoc.
"...Opens the specified document. If the document is already open, it returns a reference to the already opened PDDoc. You must call PDDocClose() once for every successful open..."
It doesn't state that you can't insert pages from a referenced PDDoc but it seems so.
I would close the PDDoc within your for-loop after inserting pages and release newDoc.
Regards
Norbert

What is meant by single entry-multiple options in the selection screen

hi,
please let me know what is the meant by 'single entry-multiple options' in a selection screen.
thanks in advance

Hi Surya,
Nomally we use to declare Selct options like
<b>select-options : s_var for mara-matnr.</b>
here you can enter range of values for material number like 000 to 9999999999.
but if you want single entry multiple option you need to give no-intervals options when the select option will behave like parameter .. when you cannot give range of values but you can give multiple values for a single field.
for single entry-multiple options write the select option like this
and see the diffrence.
<b>select-options : s_var for mara-matnr NO INTERVALS.</b>
here cannot enter low and high range for matnr but you can enter mulitple values for select option..you can enter only low range values..
Please reward if usefull..
Thanks,
Gokul

Explain about transparent mode, single mode, multiple context mode

You can explain about the differents of transparent mode, single mode, multiple context mode in ASA 5500? Thank you very much.

Great question. Hope the below helps:
Transparent Mode: In this mode, the ASA will filter traffic without requiring L3 on the ASA. This means that in your config you will not put IPs on the interfaces to be used for traffic filtering. Thus, filtering is transparent to the traffic as the traffic isn't directly routed to the firewall. Think of it like you have a server plugged into a switch. In transparent mode, you place the ASA between the server and the switch and no configuration change is required to the server. In routed mode, you place the ASA in the same physical location between the server and switch, but have to change the server to use the ASA as a default gateway.
Single Mode: Default mode of an ASA. The ASA acts as a single firewall and all interfaces are provisioned to be managed through a single firewall configuration.
Multiple Context Mode: The ASA is split into multiple virtual configurations. With the ASA now virtualized, you provision the physical interfaces on the ASA to the virtual firewall configured. Each context has it's own configuration seperate from the rest of the firewall. Multi-context is meant for enterprises to invest in a single piece of hardware and scale it for use as multiple security devices.
Hope this helps. Let me know if you have anymore questions!
-Mike
http://cs-mars.blogspot.com

Toggling between single and multiple selection in a table

I am working on ADF faces. I need to switch between single and multiple selection in <af:table based on a button I select.
I cannot use switcher or rendered property inside <af:table. Only the first one is rendering the second one is not rendering based on the switch
<f:facet name="selection">
<af:tableSelectMany autoSubmit="true"
rendered="#{treeBean.multipleRows}"/>
</f:facet>
<f:facet name="selection">
<af:tableSelectOne autoSubmit="true"
rendered="#{treeBean.singleRows}"/>
</f:facet>
When I use inside the switcher, it doesn't like the parent.
Any ideas would be greatly appreciated.
Thanks,
Vijay.

I have probably misunderstood what your issue is. I do not know what your version of ADF faces is. Here is some sample code working with my version. Please check if your jdev has "rowSelection" attribute. If it has, please try my sampe code
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:directive.page contentType="text/html;charset=utf-8"/>
<f:view>
<af:document title="tableSelectMany Demo">
<af:form>
<af:panelGroup layout="vertical">
<af:messages/>
<af:selectOneChoice value="#{sessionScope.tableSelection}"
autoSubmit="true"
id="selType"
label="Selection Type">
<af:selectItem label="Single" value="#{null}"/>
<af:selectItem label="Multiple" value="#{true}"/>
</af:selectOneChoice>
<af:table summary="Periodic table"
binding="#{tableActions.table}"
partialTriggers="selType"
rowSelection="#{sessionScope.tableSelection ? 'multiple' : 'single'}"
value="#{periodicTable.tableData}" var="row" rows="10">
<af:column>
<f:facet name="header">
<af:outputText value="Name"/>
</f:facet>
<af:outputText value="#{row.name}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Symbol"/>
</f:facet>
<af:outputText value="#{row.symbol}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Action Column"/>
</f:facet>
<af:commandButton immediate="true" text="Action"
action="#{row.action}"/>
</af:column>
</af:table>
</af:panelGroup>
</af:form>
</af:document>
</f:view>
</jsp:root>

Using single repository for Customer and Vendor

Hi All
Has anyone worked in scenario where a single repository was used to store both Customer and Vendor records? The source and Target systems are SAP ECC and MDM will have both Basic as well as contextual data.
I would like to know the likely challenges. Anyone who has worked on similar grounds can please share his viewpoints.
thanks
Ravi

Hi Ravi,
As you want to manage both Cutomer and Vendor data in MDM you need to consider the following points:
- If you are seeing the Customer and Vendor master as a combiantion satisfying some common criteria,then you can go about using the SAP delieverd Business partner rep which is designed keeping the ECC customer and Vendor details to an extent.You can unarchieve the BP rep in MDM and have a look at its data modelling if it serves your purpose.
- As of MDM 5.5 we do not have provision of holding two master records in a single rep as we can use only 1 main table.So if you want to fit in your customer and vendor masters in one rep you will have to accomodate the combined fields under a single rep with proper data modelling.
- You need to store your two masters in two separate rep and perform data modelling in such a way that your one rep hold those common fields which you wish to use for finding duplicates as mentioned in your above req and then store this information with the complete rest in a dfferent rep.So its a 2 rep concept as possible with teh current MDM version.
- I am not very sure of this method but i think we have a provision of calling and linking data from two rep and display them as one to work upon them through EP.
Hope It Helped
Thanks & Regards
Simona Pinto

How to Implement a Single Folder - Multiple Authors Scenario für NW 7.3?

Hello,
is a version "How to Implement a Single Folder - Multiple Authors Scenario" for NetWeaver 7.3 planned?
Best regards,
Arnold Gallemann

Hi Detlev,
thanks a lot for sharing your work!
Due to the reason we need a different configuration in KM, I changed e.g. some values in the .cc.xml and .co.xml files. I rebuild the project and checked the created EAR file. I noticed that the ConfigArchive file in EAR file still has the old values. It seems that SAP NetWeaver Developer Studio 7.3 is not recognizing in a portal application project the configuration of the src.config folder anymore. To test this, I removed the initial provided ConfigArchive in the folder dist\PORTAL-INF\config\ from your project. I rebuild it and the ConfigArchive in the EAR file wasnu2019t included.
I found in the documentation (http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm) the SAP Note 1572813, which would describe how to use KMC wizards in SAP NetWeaver Developer Studio 7.3. But the article is currently not released to public.
In addition I have discovered, that it is possible to include the src.config folder in the build process if the project is set up as a development component (see for details bullet point Optionally of http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm). This works. But later on I am facing another problem: I am missing the entry KMC-CM to add it as a dependency for the development component.
Best regards
Mario

Single folder multiple Author scenario in KM

Hi Every One,
I have tried to configure Single folder multiple Author scenario in KM. i have done all configurations Given in Following document but i haven't Succeeded. Please help me Out.
Configuration Document like:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f74d7c0-0d01-0010-50b1-9810a1584b00
Regards
Sridhar.

Hi All,
Sorry for the previous post. Let me explain the scenario in brief..
We need to upload a document to a particular folder in KM and assign Permissions to the same. Say For example, we have 100 users and a admin user. The uplaoded file by a user should not be viewed by other 99 users, the admin & the user who uploaded the doc can have full control over it. Similarly the case should be generated for the other 99 users.
We tried to uplod the document and assign permnissions manually. But i know this is not the best way to approach this requirement.
What should be the best solution to assign permissions to the uploaded document?
Regards,
Sridhar

Inconsistent behavior when selecting single or multiple messages

Mail seems very sensitive when selecting messages, either single or multiple. It often opens a message I have single clicked on (I do not use the pane) so that I could delete, and when selecting multiple messages for deletion or filing it often opens them all up as if i double clicked on the last one selected even though i didn't double click. This happens with both an external mouse and when using the trackpad button on my PB, and i have moved the double click settings all the way to the far right but that still didn't fix it. I have never had this problem with any other program, and I regularly select multiple messages in Entourage and never accidently open multiple copies.
I am glad that Mail warns you if you are up above a certain number so it won't accidently open 50 messages in 50 windows, but it is still annoying. Is there any fix for this or is Mail just extra sensitive to message selection somehow? I swear it opens messages sometimes with a single click though. Any thoughts/ideas/solutions are appreciated.
Thanks,
-Lewis

okay, i've just begun using Mail so perhaps it's just something that i am doing that i can learn to change, but if anyone else has experienced this and has any hints as to what i'm doing or what's going please let me know. it happens quite frequently and is very annoying. i gave mail a shot on another computer a couple of years ago and i don't remember if this happened or not, but this is the first time i've used it consistently.
thanks!
-lewis

Why we need Design Repository and Runtime repository seperately?

Hi All,
Anybody please tell me why we need design time repository and runtime repository seperately? And also I want to know the total OWB Architecture.
Thanks,
Siv
Edited by: Siv on Feb 10, 2010 10:40 PM

Hi Siv:
Concerning Repository:
Since OWB 10.2 there is only one Repository storing Design and Runtime-Components.
excerpt from http://download.oracle.com/docs/cd/E10926_01/doc/owb.101/b12146/over.htm (OWB 10.1.):
The Design Repository, installed in an Oracle database, stores the metadata definitions for all of the objects used in Warehouse Builder. This is where all of the design information is stored for the target systems you are creating. You can access metadata stored here using the client user-interface, or through OMB Plus, the Warehouse Builder scripting utility.
The runtime repository, installed in an Oracle database, stores all of the deployment data as well as data from executed mappings and process flows. This is where the target environment information is stored for the business intelligence systems you create. This includes connection information for all of the deployment locations.
Which version of OWB are you using?
Greetings
Guenther Herzog

Single repository - multiple runtimes

Similar Messages

Maybe you are looking for