Single result recording valuation based on min and max values

hi,
Our client requirement is as follows:
While entering the single results recording the system should not calculate the average , we need the system should valuate based on the Minimum and Maximum values in result entry. Is it possible?. can anyone explain in details.
Regards,
Ramu.

Hi
This is a standard SAP functionality available in SAP
As
Variable Inspection by S-Method
If you set this indicator, you define the valuation mode for the variable inspection according to the s-method (ISO 3951).
For a sampling procedure with this valuation mode, valuation occurs using a sampling plan consisting of sample size and k-factor. A quality score is calculated from the measured values of a sample and compared with the k-factor.
Now you want Both limits should come into picture while valuating then Check valuation Rule :31 -Variable insp. s-Method (two limits)
so select the Valuation mode : 310- Variable insp. s-Method (two limits) in sampling procedure.
I hope this will add some value.
Regars
Sujit

Similar Messages

Min and Max values from entire table

Hi,
i have requirement in which i need to find the min and max values from the entire table.
See the sample data
create table test
Sal1 int,
Sal2 int,
Sal3 int
insert into test values (100,700,5700)
insert into test values (200,3300,5300)
insert into test values (4400,1200,3500)
insert into test values (5400,5600,3100)
i want the output as 100 and 5700.. how can i achieve this in a single query. Please through some light on this topic..!
Thanking you in advance
Regards,
Balaji Prasad B
Balaji - BI Developer

Below is an example with a subquery for each of the queries Mohammad posted in order to return both min and max in a single result set.
SELECT ( SELECT MAX(Maxx) AS Maxx
FROM test UNPIVOT
( Maxx FOR E IN ( Sal1, Sal2, Sal3 ) ) AS unpvt
) AS Maxx
, ( SELECT MIN(Minn) Minn
FROM test UNPIVOT
( Minn FOR E IN ( Sal1, Sal2, Sal3 ) ) AS unpvt
) AS Minxx;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Min and MAx Value in a SELECT Statement

Hi,
I have a scenario where I am Selecting the values BETWEEN MIN and MAX values:
SELECT * FROM ABC WHERE CODE BETWEEN MIN(CODE) AND MAX(CODE)
ITS GETTING Error as:ORA-00934: group function is not allowed here
Any help will be needful for me.

select substr(no,1,3)||to_char(substr(no,4,1)+1) "first missing number"
from
with t as
(select 'ABC1' no from dual
union select 'ABC2' from dual
union select 'ABC3' from dual
union select 'ABC5' from dual
union select 'ABC6' from dual
union select 'ABC8' from dual
select no, lead(no,1,0) over (order by no) next_no from t
where substr(next_no,4,1) - substr(no,4,1) > 1
and rownum = 1;

Highlighting Min and Max Values on each line

Hello,
Is it possible to highlight the Min and Max values on each row of a Query. For example I have sales below by product line for the last seven quarters. The user
would like the Max value (150) for Product Line ABC Highlighted as Green and the Min value (1055) color coded as Red. Like wise for each line - DEF 200 as green and 100 as red and GHI - 400 as green and 100 as red.
FYQ Q207 Q307 Q407 Q108 Q208 Q308 Q408
ABC     1500     1200     1400     1050     1100     1100     1100
DEF     1550     1000     1560     1220     1340     1640     2000
GHI     1000     2000     3000     4000     3250     2220     3750
Is this possible using Exceptions? or may be any other means? We are on Bex 7.0
Best Regards,
Sanjiv

Hello Sanjiv,
I think it can be done by JavaScript, but needs more effort
[Use of JavaScript Functions|http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a853bc623c075e10000000a114084/content.htm]
Try the exception available in the BW[BW Stylesheets|http://help.sap.com/saphelp_nw04/helpdata/en/3f/ca453afbf37b54e10000000a11402f/content.htm]
SAPBEXformats - Formatting cell (scaling factors)
SAPBEXexcGood1 - Exception with priority good 1
SAPBEXexcGood2 - Exception with priority good 2
SAPBEXexcGood3 - Exception with priority good 3
SAPBEXexcCritical4 - Exception with priority critical 4
SAPBEXexcCritical5 - Exception with priority critical 5
SAPBEXexcCritical6 - Exception with priority critical 6
SAPBEXexcBad7 - Exception with priority bad 7
SAPBEXexcBad8 - Exception with priority bad 8
SAPBEXexcBad9 - Exception with priority bad 9
See this thread,
Change the colour of a cell text depending on the value Web Reports (NW04s)
Thanks
Chandran
Edited by: Chandran Ganesan on Mar 19, 2008 4:27 PM

Quality parameter -min and max values should be maintained w.r.to contract?

Hi all,
Min and max values in quantity contract should be maintained with respect to contract. till now we were maintaing min and max values with respect to inspection plans, but here since it differs for customer/vendor contracts - it need to be with respect to that. kindly suggest me on this
regards,
Soumya

In the Material Assignment TAB of the Inspection Plan Header, you can maintain or assign Vendor/Customer. These specifications will be assigned automatically for the Purchase Orders/Sales Orders for the Material/Vendor or Material /Customer Combination at Plant Level.
Check this and revert back.
Best Regards,
Raghavendra Nayak

Calculating min and max value from number array

I have array which is having return type Number.i want to calculate min and max value of this array..try to help asap..
Thanks
dhanu

hi there,
public class MinMax {
     int arr[]= { 27, 3, 42, 18, 243, -43, 6, -8 };
     int min, max;
     public MinMax() {
// it's very bad way to do it.
//          min=99999;
//          max=-99999;
// this must be as following
                min = max = arr[0];
          search();
          System.out.println("The minimum value is: "+min);
          System.out.println("The maximum value is: "+max);
     private void search() {
// and here we can search from <1> index instead of <0>
          for (int j=1; j<arr.length; j++) {
               if (arr[j]<min) {
                    min=arr[j];
               else if (arr[j]>max) {
                    max=arr[j];
     public static void main(String args[]) {
          new MinMax();
there is a bug in the supplied code. Your homework is
to figure out what it is without posting another
message for help with your homework.well, i think it's a tragedy :(

Medium, min, and max values on ALV

Hi friends ! How are are you ? Fine ?
How can i calc medium, min, and max values on ALV ?
Thanks !

Hi Fabrício
I think you set fieldcatalog at runtime dynamically to arrange dynamic columns. So, while you are setting it just set proper values to the attribute "do_sum" for relevant fields.
For more information how to set fieldcatalog dynamically, you can refer to the tutorial "An Easy Reference for ALV Grid Control".
Regards
*--Serdar [[ BC ] | https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk sag jiw=]

Difference of value of a dimension based on min and max

Database: Oracle 10g
BO-BOXIr3
Let me explain the exact problem again.
As per the below code, I have the data in this format in my table:
Code:
Date              Site ID     KWH
1/2/2009 00:00     IN-1     22
1/2/2009 01:00     IN-1     28
1/3/2009 03:00     IN-2     25
1/3/2009 04:00     IN-2     46
1/4/2009 00:00     IN-3     28
1/4/2009 10:00     IN-3     34
1/5/2009 08:00     IN-4     31
1/5/2009 09:00     IN-4     55
1/5/2009 11:00     IN-4     77
1/6/2009 00:00     IN-5     34
Now want to build a report with following columns:
Site     Count     KWH
IN-1     2     6 (ex.-28-22)
IN-2     2     21
IN-3     2     6
IN-4     3     46 (ex.-77-31)
IN-5     2     34
SITE- distinct site name.
COUNT-count is number of repetitions of site id between min and max date.
KWH -(Delta between the min and max date)
To get the above result I have created 3 report from different queries since not able to get these al in a single report viz Count, Max Value and Min value. Well I have all these 3 reports or table on a single page.
Count-this report will give the count between the dates
Max Value-this report will give me the values of kwh for max dates for each site id
Min Value-this report will give me the values of kwh for min dates for each site id
Now want to create a single report based on these 3 reports which contains the column
Site|Count|KWH
IS IT POSSIBLE?
Or
Is it possible to build such report in a single one with all the required column which I mentioned?
The variables which I created to get the max & min dates,
Mx_dt= =Max([Query 2].[Hourly]) In ([Query 2].[SITE_ID])
Mn_dt= =Min([Query 3 (12)].[Hourly]) In ([Query 3 (12)].[SITE_ID])
For filtering on report used following variables:
if_st_mn=If([mn_dt])=[Hourly] Then "ok" Else "no"
if_st_mx =If([mx_dt])=[Hourly] Then "ok" Else "no"
will filter on "ok" to get the max and min date values.
rest of the variable in the snap are not usable.

Yes, you can do it in one report.
I created a sample report from efashion:
Year | Lines | Sales Revenue
2001 | Accessories | $250
2003 | Accessories | $550
2001 | City Skirts | $1050
2003 | City Skirts | $1150...........
Create 2 variables 1) Count and 2) Difference:
1) Count as formula - =Count([Lines]) In Report
2) Difference as formula - =Sum([Sales revenue]) Where (Max([Year]) In Report = [Year]) - Sum([Sales revenue]) Where (Min([Year]) In Report = [Year])
You can replace the formula with your report variables. Then just drag Site ID, Count and Difference variables to your report.
Thanks
Jai

Global Change or filter based on Min and Max dates

Hi Guys,
Hopefully there is a genius out there that is an expert with filters and or global changes, I am after a solution and can’t work out if it is possible to do in P6.
Based on a filter (using codes to select a group of activities) I want to write a value into two date UDF Fields can I:
Run a global change to give the earliest and latest date in the group and write the result to all tasks in the group? or
Is there a mindate maxdate option in Global change or filter? Or
If these tasks were grouped in the activity view can a global change be written to fill down the dates that the summary level is displaying, which are essentially the min and max dates of the groups.
I could do this pretty easily in excel but I have over a 100 projects and doing the import one at a time is not feasible.
I could create LOE’s but as my variables are constantly changing and due to the volume also not an option.
Summary bars are not an option eithers as I am writing the UDF’s to get all the bars I want on one line,
An option for me might be to do it using Legare but I would prefer to see if I can get it done in P6 first.
Cheers
Rob

Yes, you can do it in one report.
I created a sample report from efashion:
Year | Lines | Sales Revenue
2001 | Accessories | $250
2003 | Accessories | $550
2001 | City Skirts | $1050
2003 | City Skirts | $1150...........
Create 2 variables 1) Count and 2) Difference:
1) Count as formula - =Count([Lines]) In Report
2) Difference as formula - =Sum([Sales revenue]) Where (Max([Year]) In Report = [Year]) - Sum([Sales revenue]) Where (Min([Year]) In Report = [Year])
You can replace the formula with your report variables. Then just drag Site ID, Count and Difference variables to your report.
Thanks
Jai

OBIEE- Calculating Min and Max Values

Hi Friends,
I have an Issue with regards to calculating Min/Max Values.
In my Data base we dont have Message Count. So we created a Logical column in BMM Layer called "Message Count" based on the column "Out/In No" i.e by creating count of it i.e (Count(out/in no)) in BMM
To calculate Inbound Messages we writing -- filter(Message count using messagetype ='i') at report level
To calculate Outbound Messages we writing -- filter(Message count using messagetype ='o') at report Level
To calculate Total Messages we writing----- "Message Count".
But Now we had an issue to calculate "Min Inbound/Max Inbound/Min Outbound/Max Outbound/Avg In/Avg Out" types of Messages.
To make it clear definition for MIN and MAx is Like This.
Say Ravi received(Inbound) messages      2
Say Roy received(Inbound) messages      5
Say Kiran received(Inbound) messages   11 on a particular date.
So for that particular date Min Inbound is 2
So for that particular date Max Inbound is 11
and Avg Inbound will be (2+5+11)/3
On this basis we have to implement it in OBIEE. For any more clarifications please reply to my thread.
Please reply to my Issue ASAP as it is critical and I am out of time.
Thanks in Advance.
Regards

Hi,
Do you mean to ask minimum stock in a plant and maximum stock in a plant over a period of time?
Due to receipts stocks flows in to the storage location of a plant. May be in one period there will be less stock or in one period there will be maximum stock.
May be history tables like MBEWH or MARDH or the report MC.9 ( you need to provide the period as input) etc for your case.If this is not your requirement please reply back.
Regards

Export Waveform Chart Plots data to spreadsheet file based on X scale (Time Stamp) min and Max Value

Hi All,
Query 1:I am trying to export the Chart data(Total plots 6 ) only between the X scale Min Time and Max time limit .
But couldnt able to achieve that progammtically.
is their anyway to achieve this.
Query 2:Also ,In chart their is an right click option to export data to excel,but when using this option the data get exported in its own temporary name(iv*****.tmp),i dont want this to happen.Instead the data expored using that option should be written in a file specified by me(everyting should happen in backend)
pls suggest the best solution for above 2 queries.
Thanks,
Selvan.

Hi selvan,
1) read the chart history (or better keep a history in your own shift register) and limit the data to the XMin and XMax values (read all those chart settings from its properties). Then save the data using WriteToSpreadsheetFile…
2) The right-click option is as it is. When you need different behaviour you need to program your own routine. Once you finished query 1 it will be no problem anymore to also solve query 2…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to show Min and Max values when another value "changes to a new value"

Hi
If I have this data (generated with this query: SELECT 1 A, 1 B UNION ALL SELECT 2, 1 UNION ALL SELECT 3, 2 UNION ALL SELECT 4, 2 UNION ALL SELECT 5, 1)
A B
1 1
2 1
3 2
4 2
5 1
How can I generate this data (created with this query SELECT 1 Amin, 2 Amax, 1 B UNION ALL SELECT 3, 4, 2 UNION ALL SELECT 5, 5, 1)
Amin Amax B
1 2 1
3 4 2
5 5 1
Thanks.

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. You also do not know the ANSI/ISO syntax for insertion and you did the old Sybase insertion kludge wrong, that we need keys, etc.
CREATE TABLE Foobar
(foo_seq INTEGER NOT NULL PRIMARY KEY,
glop_score INTEGER NOT NULL);
INSERT INTO Foobar
VALUE
(1,1),
(2,1),
(3,2),
(4,2),
(5,1);
>> How can I generate this data (created with this query SELECT 1 Amin, 2 Amax, 1 B UNION ALL SELECT 3, 4, 2 UNION ALL SELECT 5, 5, 1) <<
This makes no sense; you have the wrong syntax and mixed data types. My guess is:
SELECT MIN(foo_seg), MAX(foo_seq), MAX(glop_score)
FROM Foobar
GROUP BY glop_score
HAVING MIN(glop_score) = MAX(glop_score);
Amin Amax B
1 2 1
3 4 2
5 5 1
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

MIN and MAX datetimes ti find range

I am using Oracle 11g version
create table re(Name char(20),Datetime char(45),val1 number);
insert into re values('abc','10/29/2012 13:00','1.5')
insert into re values('abc','10/29/2012 13:05','1.5')
insert into re values('abc','10/29/2012 13:10','1.5')
insert into re values('abc','10/29/2012 13:15','1.5')
insert into re values('abc','10/29/2012 13:20','0.00')
insert into re values('abc','10/29/2012 13:25','0.00')
insert into re values('abc','10/29/2012 13:30','0.00')
insert into re values('abc','10/29/2012 13:35','0.00')
insert into re values('abc','10/29/2012 13:40','2.1')
insert into re values('abc','10/29/2012 13:45','2.3')
insert into re values('abc','10/29/2012 13:50','2.1')
insert into re values('abc','10/29/2012 13:55','2.1')
insert into re values('abc','10/29/2012 14:00','2.2')
O/P:
In this way data is stored in database.Needed output is, I want the datetime column data range with min and max values where val1>0 only.
Expected result while we consider the above data is::
Name mintime maxtime
abc 10/19/2012 13:00 10/19/2012 13:15
abc 10/29/2012 13:40 10/29/2012 14:00
For this I tried something like this,
select name, min(to_date(Datetime ,'mm/dd/yyyy hh24:mi')) start, max(to_date(Datetime ,'mm/dd/yyyy hh24:mi')) end from (
select name, Datetime ,to_date(Datetime ,'mm/dd/yyyy hh24:mi') - rank() over (partition by loc_name order by t1 asc) Val_col from re where val1 > 0
) group by lname, Val_col
but I am getting the output like this for above query.
name start end
abc 10/29/2012 13:00 10/29/2012 13:00
abc 10/29/2012 13:05 10/29/2012 13:05
so.on.
Edited by: 913672 on Apr 3, 2013 3:07 AM

913672 wrote:
I am using Oracle 11g version
create table re(Name char(20),Datetime char(45),val1 number);
insert into re values('abc','10/29/2012 13:00','1.5')
insert into re values('abc','10/29/2012 13:05','1.5')
insert into re values('abc','10/29/2012 13:10','1.5')
insert into re values('abc','10/29/2012 13:15','1.5')
insert into re values('abc','10/29/2012 13:20','0.00')
insert into re values('abc','10/29/2012 13:25','0.00')
insert into re values('abc','10/29/2012 13:30','0.00')
insert into re values('abc','10/29/2012 13:35','0.00')
insert into re values('abc','10/29/2012 13:40','2.1')
insert into re values('abc','10/29/2012 13:45','2.3')
insert into re values('abc','10/29/2012 13:50','2.1')
insert into re values('abc','10/29/2012 13:55','2.1')
insert into re values('abc','10/29/2012 14:00','2.2')
O/P:
In this way data is stored in database.Needed output is, I want the datetime column data range with min and max values where val1>0 only.
Expected result while we consider the above data is::
Name mintime maxtime
abc 10/19/2012 13:00 10/19/2012 13:15
abc 10/29/2012 13:40 10/29/2012 14:00
For this I tried something like this,
select name, min(to_date(Datetime ,'mm/dd/yyyy hh24:mi')) start, max(to_date(Datetime ,'mm/dd/yyyy hh24:mi')) end from (
select name, Datetime ,to_date(Datetime ,'mm/dd/yyyy hh24:mi') - rank() over (partition by loc_name order by t1 asc) Val_col from re where val1 > 0
) group by lname, Val_col
but I am getting the output like this for above query.
name start end
abc 10/29/2012 13:00 10/29/2012 13:00
abc 10/29/2012 13:05 10/29/2012 13:05
so.on.Firstly and most importantly do NOT store dates as char columns: that's what the DATE type is for.
Secondly, i'm not sure how you get your output from the input, particularly as your SQL contains 'partition by loc_name' which
doesn't even exist in your example table.
Why has the same name got two rows with those min/max times. Are you partitioning by val1?

Capturing min and max of a func. generated sine wave

I need to identify (in real time) the min and max values of a continuous sine wave (whose amplitude may vary). I need to capture the value of each min and max and the time of each such occurrence.

If the sine wave is in the form of a waveform data type, then all you have to use is the Waveform Min Max function. This does all that you want including returning the time values. There's even an example under Help>Fundamentals>Waveforms>Waveform Operations.

Single Result Recording

Hi Experts,
I have a scenario where the MIC should be created for single result recording, but user wants to record less number or results in system . This can be achieved by putting either no scope or less scope.But once we record a less number, grays of the Inspected samples to lesser number according to the sample results entered.
The requirement is Single result recording, but the inspected samples should be able to be modified irrespective of the no. of results entered.
For egs.
Sample size to inspect: 100 (single values)
User enters values for only 5 out of 100.
But user should be able to specify the Inspected samples as 100. (this is because in this scenario they would record only the results out of spec results, if in spec.results they don't want to record the results data)
Alternate is to use Summarized result recording, but it does not allow to record individual records for these out of spec. results.
Thanks
Jomy

dear jomy
Seems difficult. tried with lot options not working. Wait for experts comments
regards
gajesh

Single result recording valuation based on min and max values

Similar Messages

Maybe you are looking for