Single Router Solution for 2 Service Providers

Friends,
I have a 2951 router and 2 service providers, with no firewalls and we dont want to get firewalls, now we need to make a failover configuration for those two service providers, any suggestions please.
Thanks
Vikram

Hey Jody,
I configured my lab router with IP SLA as follows
track 1 ip sla 1 reachability
track 2 ip sla 2 reachability
ip sla 1
icmp-echo <ISP1 Ip address> source-interface GigabitEthernet0/0
threshold 3
timeout 1000
frequency 180
ip sla schedule 2 life forever start-time now
ip sla 2
icmp-echo <ISP2 ip address> source-interface GigabitEthernet0/2
frequency 180
threshold 3
timeout 1000
ip sla schedule 2 life forever start-time now
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 track 1
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/2 10 track 2
in this scenario, if i connect through console to the router, test is successfull and if i put that router in the network, and manually as soon as i say Gi0/0 shutdown, router crashes
any suggestions ?

Similar Messages

What is SAP for Professional Service Providers?

Hi people!
I need to know what is SAP for Professional Service Providers and for what I use it?
Thanks!

I just googled it & got the following
<a href="http://www30.sap.com/industries/professionalservices/customersuccess/index.epx">link</a>.
~Suresh

Single server solution for video surveillance

Do we have a single server solution for Cisco video surveillance? Something similar to the Business Edition 6000 series in unified communications.
If yes, please provide information.
Thanks in advance

Cisco VSM can be used as single server solution depending upon your requirement. you could install Management server (which manages recordings) and VSOM (Operation Manager which manages you user profile and user interface) on a single server.
please refer to below doc for more info.
http://www.cisco.com/c/dam/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/7_0/srnd/vsm_7_0_srnd.pdf

Looking for Cisco service providers outside of USA

I am looking for Cisco service providers in Guyana.
It can be a third party vendor for Cisco partner for Cisco infrastructure maintenance.
Thanks,
Sam

Hello, xszhuMerak1.
I can help you find local Cisco support on your area. Would you be able to tell me for what Cisco infrastructure this support will be? Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

High Availibity solution for Sharepoint Service Applications

I have a scenario with the three nodes SP1 , SP2 and DR-SP with server 2012 standard, each running SharePoint 2013 enterprise, All of three nodes are members of single SharePoint farm that spans two data centers.Primary Data Center have two nodes SP1 , SP2
and DR data center have one node DR-SP of share point 2013.
For MS SQL i have three nodes DB1, DB2 and DR-DB3 with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Fail-over Cluster (WSFC) that spans two data centers.Primary Data Center have two nodes DB1 ,DB2 and DR data center have one node DR-DB of SQL Server 2012 enterprise.
Currently i have configured these service applications on primary data center nodes SP1 .How i can enable high availability for different service Applications of SharePoint 2013 like Profile service application, search service application,
managed meta data application in case of primary data center outage.

stretched farms are not supported unless the WAN provides sub-millisecond ping times.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Single click solution for installing and invking application

We would like to web-deploy a swing application. The users have limited computer knowledge. We can not assume that JRE or JWS has been installed. Yet we would like to provide single click link either to install first or to run the application subsequently.
I find in this forum quite a number questions related to this issue. The suggested solution is based on JavaScript/VB script.
Could I please have a working code encompassing scripts and jnlp files for single click solution ?
Thank you.
ganesan

Hello, we have tried the compile the various Sun tools and posting on this forum to create a "close to single click" installation. You can take a look at our approach here:
http://www.digistamp.com/t3start.htm
It includes a combination of javascript and vbscript. I would appreciate any feedback you have about problems or ways to improve. You can skip the account sign-up step and just try to run the app if you prefer.
We still are having problems with Netscape. Our focus has been Windows and Mac, at this point. Our users are somewhat technical savvy and we are getting good user feedback with a few problems.
Rick

What is the best solution for bad service at home

I need to know if there is any solution for this problem a's in signal boosters and all....

You should contact your Service Provider and tell them your problem that you are facing..
That's the only way because they can solve the problem from their end

Need solution for SNMP Service on Solaris

Hi Friends,
We use the solaris servers. For SNMP we have changed the Default Password of SNMP Service.
We audited our Servers doing the Penetration Testing (PT). In this activity it was reported the SNMP is using the default password. They had the tool "Getif" for SNMP testing. If the default password are set for SNMP service this toll reads the important information. If defaults passwords are not used it cannot read any information about SNMP.
When i change the default password for SNMP, should i restart the the service to take changes in effect?
Pls help

Hi taher;
Thanx buddy. You are really helping us out. I just try to share my knowledge wiht forums user i also already learn many thing from forums,as specialy Hussein Sawwan
I have two more doubts. Like in linux we use which command to see if that executable is in the PATH but in Solaris 10 is whence a replacement for that.I belive You can use which command in solaris too.
Q2). I dont think i need to go for split architecture as both the DB (11i) and application tier are certified for solaris *10* SPARC (64-bit).You should decide it not me :) you can use split config if your business need it or not. Its just depend your analysis
I hope; my answer would be answer of your quesition and give you some idea about your issue :)
Regard
Helios

How to implement redundant with 1 CE router to 2 MPLS service providers

Dear all,
Our head-office are currently have 1 Cisco CPE 3825 router with 2 WAN connections to our branches. We are now using static routing protocol in our network infrastructure, we consider how to implement the redundancy for networks by the redundant circuits connection to 2 MPLS providers, only when the primary connection to the primary MPLS L3 provider fail, the backup link to the second MPLS Layer 2 provider automatically active. Anybody knows where can I find information, tips or examples, how we'd handle the routing for that?
We are now have:
1 G0/1 interface connect to primary MPLS L3 Provider (the 2nd G0/2 interface is a leased-line connection to our partner, and we not consider here)
1 HWIC (layer 2) card, with 4 ports, which has interface F0/2/3 connected to the backup MPLS Layer 2 provider.
Thanks in advance.
PS: Current configuration : 3727 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Router
boot-start-marker
boot system flash c3825-entservicesk9-mz.123-11.T7.bin
boot-end-marker
logging buffered 4096 debugging
logging monitor xml
no aaa new-model
ip subnet-zero
ip cef
no ftp-server write-enable
no spanning-tree vlan 4
no spanning-tree vlan 5
interface GigabitEthernet0/1
description connect to VDC MPLS$ETH-WAN$
mtu 1480
ip address 222.x.x.66 255.255.255.252
ip flow ingress
ip flow egress
service-policy output SDM-QoS-Policy-1
ip route-cache flow
duplex auto
speed auto
media-type rj45
fair-queue 64 256 256
no cdp enable
interface FastEthernet0/2/0
switchport access vlan 2
no cdp enable
interface FastEthernet0/2/3
description ToTBToverFPT
switchport access vlan 5
no cdp enable
interface Vlan2
description CONNECT TO MPLS_VDC
ip address 192.168.201.9 255.255.248.0
interface Vlan5
description Connect to HoChiMinhCity
ip address 172.16.1.5 255.255.255.252
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 172.16.244.0 255.255.255.0 222.255.33.65
ip route 192.168.0.0 255.255.248.0 222.255.33.65
ip route 192.168.24.0 255.255.254.0 222.255.33.65
ip route 192.168.30.0 255.255.254.0 222.255.33.65
ip route 192.168.32.0 255.255.254.0 222.255.33.65
ip route 222.x.x.68 255.255.255.252 222.255.33.65
ip route 222.255.33.72 255.255.255.252 222.255.33.65
ip route 222.x.x.196 255.255.255.252 222.255.33.65
ip route 222.x.x.200 255.255.255.252 222.255.33.65
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 3
control-plane
line con 0
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password
login
transport input telnet
line vty 5 14
privilege level 15
password
login
transport input telnet
line vty 15
privilege level 15
password
login
transport input telnet
parser view SDM_Monitor
scheduler allocate 20000 1000
end

Hi Mr jianqu,
Because of our customer now has 2 main central offices, and all other sub branches are now connected to each of these main central office via one primary full-meshed MPLS VPN of 1st Service Provider, so If I use the float static routes, and when there is a failure at one link at a CENTRAL CE Router to primary link to primary MPLS VPN Service Provider, but still there is no failure at the other site from a router CE sub branch with the the PE of the primary full-meshed MPLS VPN Layer 3 Service Provider,so It cannot cause a failover to a second redundant link of the 2nd Service Provider?
So with our system, do we only have one solution like this:
-Configure BGP as the routing protocol between the CE and the PE routers.
-Use local preference and Multi Exit Discriminator (MED) when running BGP inside a our customer VPN to select the primary and backup links.
-Use AS-override feature to support overlapping AS numbers between customer sites

Single server solution for RDS / TS / RDP using Windows Server 2012 R2

Planning on setting up a small single server and need this functionality:
* 3 local users runnnig Windows 7 Home Premium needs to access files on the server
* The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
functionality on the server?
And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
(I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
7 Pro, but we would like a solution with minimal investment in time and money)
Rgds
Petter

Hi Ryan,
and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
"have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
Single Sign On SSO. "
This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
backups etc, than to just go to each machine and do what is needed.
We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
"Option 1
2 virtual machines 1x DC and 1x RDS server."
So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
as this is impossible in Home versions) and still access the server disks somehow, or is it impossible?
Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
"Option 2
2 virtual machines 1x DC and 1x RDS server.
You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
Your users would have two sets of credentials, one for the local client and one for the domain."
I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
"Option 3
1x Server
The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
server that needs to act as a very fast file server locally.
However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
Rgds
Petter

Options for managed service providers

Hi! I work for a managed service provider. We currently use Zenith to manage alerting and status reports for our myriad managed Windows servers. We are looking for a software solution to help monitor Mac servers in a similar way.
Our requirements are that we want it to work with computers at multiple WAN sites (the company networks that we manage for our clients), without a VPN connection, and securely (over SSL would be nice.)
Value add items would be the ability to remote connect to the desktop, patch management, and log aggregation.
I can build a lot of this functionality, but it would be more cost affective to use commercially available software, if it exists.

Start with rummaging around for information on [Nagios|http://www.nagios.org] and [Lithium|http://lithium5.com>, as a first-blush open-source and commercial offerings here, and also as potential search targets.
Mac OS X includes remote desktop access and patch management and related offerings either directly, or as part of Mac OS X Server product.

List of InDesign Service Providers?

Posted by Marc Madenwald... [Updated July 29, 2003]
Hello,
There is an online directory of print service providers who support Adobe InDesign located at: http://partners.adobe.com/asn/partnerfinder/search_service.jsp
If you can not find a print service provider in your area or your current provider does not accept InDesign files then Adobe would like to work with them to ensure they can support you. Please help Adobe contact them by completing the form located at: http://partners.adobe.com/asn/partnerfinder/findspform.jsp
If you are a print service provider and would like to be included in the online directory you can register for free with the Adobe Solutions Network (ASN) or apply to become an ASN Adobe Authorized Service Provider at: http://partners.adobe.com/asn/service/benefits.jsp
A PDF brochure about the Adobe Solutions Network Print Service Provider Program is posted at: http://partners.adobe.com/asn/service/PDFS/ASN_PSPP_NA_DS.pdf
Print Service Provider who are interested in learning more about supporting Adobe InDesign (or InDesign customers who want to get this information to their service provider) should visit the resources available at: http://partners.adobe.com/asn/service/indesign/index.jsp
These resources include:
A FREE InDesign Print Service Provider Toolkit:
http://web3.kpcorp.com/adobeASN/form.asp
The InDesign 2.0 Printing Guide for Print Service Providers:
http://partners.adobe.com/asn/service/indesign/PDFS/ID2_Printing_Guide.pdf
If your service provider doesnt have InDesign so they cant support output of your files, let them know that they can order a 30 day fully functional trial version at http://www.adobe.com/products/indesign/tryindesign.html
If you are looking for more advanced training options please search the online directory of Adobe Certified Training Providers located at: http://partners.adobe.com/asn/partnerfinder/search_training.jsp
Best regards,
Marc

Hi Max,
Thank you for your quick response. I have attached a couple of screenshots, which should hopefully help to explain what I mean. In service designer it is possible to define extensions, one of which is 'service attributes'. When we define imageURL1, then put an image url in the individual service, the image automatically gets shown on the service details page, with no further customisations needed. We were wondering if there are any other service attributes that work like this, i.e. can be defined and have a certain behaviour automatically associated with them, or imageURL is the only one? If there are others do you know where we could find a list of them?
Many thanks,
Richard

Fault fixing: BT vs third party service providers

I assume that BT has to pay compensation to third party providers if the line is down?
I also assume that this is more than the compensation it has to pay its own customers?
I make this assumption because:
A tree fell on the line here and disconnected two business lines and an alarm redcare line (all BT) into the house (22nd December 2013)
Also disconnected an Orange line into the same house (different customer, residential line)
I reported our outage right away. I'm still waiting for reconnection.
Orange customer reported the outage the day before yesterday (she was away from home until then). Yesterday Openreach came and ran a temporary cable across the broken one but just for the Orange customer despite all of the above lines running through the broken cable. It would have been pretty straightforward for them to run temporary cable for all the lines but they didn't. They just did the one and went home.
So third party lines get priority? Over even Business customers?
It really is a shocking service. I realise that they are busy right now but to come and fix on and no do the others while they were here is unforgivable.

BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
Welcome to the BT Residential Customers forum
If you are a business user, please could you post on the BT Business forum at http://business.forums.bt.com/
Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

IPv6 Multicast support for service providers 6PE / 6VPE

Hi,
Can anyone comment on the current state of development for IPv6 Multicast support for Service Providers who are using 6PE or 6VPE in their MPLS core.
(6PE - SP is running MPLS in its IPv4 core, it uses IPv6-enabled provider edge (PE) routers to transport IPv6 traffic over an IPv4-only enabled core. 6PE does not support VPN,s it just provides a mechanism for tunneling IPv6 packets from ingress PE to egress PE routers)
(6VPE - refers to a PE router capable of supporting IPv6 VPNs. A 6VPE solution can be used to provide IPv6 based layer 3 VPN services in a similar way to IPv4 based Layer 3 VPN services.)
My understanding is that 6PE and 6VPE solution are unable to support IPv6 multicast traffic.
Any further information on configuration, design or development work in the pipeline would be gratefully received,
kind regards John

Hi John,
From our question I understand you are sking about the MVPN support for IPv6 multicast. It is actually supported on the XR platform as of now. Please refer:
http://www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.0/multicast/configuration/guide/mc40mcst.html#wp2890031
I hope this helps.
Regards,
Ruchir

Any solutions for URL based routing

Hi,
I have an ASA 5505 that has 2 route (1 route connecting to MPLS VPN to HK branch office and 1 route connecting to Internet service provider). As you know, ISP in China blocking many web sites (such as facebook, youtube or etc.). So , I would like to route the traffic when the user in China office would like to browse facebook.com or youtube.com to HK ASA and egress to the internet by NAT. However, all other traffic remain to route to ISP in China, so that the Internet traffic in HK office will not be overload and the user in China can browse facebook.com or youtube.com.
I have researched a topic of regular expression with Modular Policy Framework (MPF). I expected that if the ASA can match the traffic, I can set next hop to HK office's ASA. However, this feature does not support https so that my expectation failed. Because the login page and sometime these web site using https for encryption. I hope URL based routing work on both http and https can work.
Do anyone have any solutions to resolve this situation? Please kindly provide it to me. I would appreiciate it if you could also provide configuration example with commands. I look forward to hearing from anyone soon. Thank you.
Regards,
Lapson Wong

What you are trying to do is policy-based routing which is not supported on the ASA. MPF is used only for inspection and QoS type serverices.
If using a proxy is not an option, you would need to put in a router that would send the desired traffic over the WAN network. another option, though I would not recommend it, is to find all the IPs of facebook, youtube, etc. and add static routes on the ASA pointing out the WAN interface.

Single Router Solution for 2 Service Providers

Similar Messages

Maybe you are looking for