Single selection of checkbox

Hi.
I have added an editable checkbox to an ALV grid.
The requirement is that only one checkbox should be selected at a time.
could you please help me with it....
I have to do this in SAP4.6C
best regards,
Karen

hi
it may help u.
PERFORM FIELDCAT.
i_layout-box_fieldname = 'CHECK'.
PERFORM DISPLAY.
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
*DATA: W_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MATNR'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'MATERIAL NUMBER'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '2'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'BSART'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'document type'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '3'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'WERKS'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'PLANT'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '5'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'EKGRP'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'Purchasing group'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '6'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'MENGE'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'QUANTITY'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '7'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-FIELDNAME = 'BNFPO'.
W_FIELDCAT-TABNAME = 'I_MATNR'.
W_FIELDCAT-SELTEXT_M = 'Item number'.
W_FIELDCAT-EDIT = 'X'.
W_FIELDCAT-COL_POS = '8'.
APPEND W_FIELDCAT TO I_FIELDCAT.
ENDFORM.                    " FIELDCAT
FORM DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_INTERFACE_CHECK                 = SY-REPID
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = SY-REPID
     I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     I_CALLBACK_USER_COMMAND           = 'PUR_REQUISITION'
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         = i_layout
     IT_FIELDCAT                       = I_FIELDCAT
IT_EXCLUDING                      =
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZDE_PF_STATUS'.
ENDFORM.                    "set_pf_status
do like this in this it takes one at time.
and create pf status and write code for that after checking what u want to do.
   regards,
chandu,
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 22, 2008 1:00 PM

Similar Messages

SSRS report - A single selection dropdown list converted to text box

Hello everyone,
We created a single selection dropdown parameter (City parameter) on a report. The data in this parameter is populated using MDX query. Also, it is filtered based on selection of another single selection dropdown list (Country parameter) of a report.
The problem is when there is no cities for the selected country the dropdown list is gets converted to free type text box and user can insert city data in it. Why SSRS is not keeping it as empty dropdown list with no data?
Any help would be much appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hello Charlie,
We developed a fresh report only with two parameters but still the dropdown control gets converted to text box in our case. We have two single selection parameters, Location and Customers. Based on selected Location the customer
dropdown gets populated.
Location Parameter Query
WITH MEMBER [Measures].[ParameterCaption] AS [Location].[Location Name].CURRENTMEMBER.MEMBER_CAPTION MEMBER [Measures].[ParameterValue] AS [Location].[Location Name].CURRENTMEMBER.UNIQUENAME MEMBER
[Measures].[ParameterLevel] AS [Location].[Location Name].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Location].[Location Name].ALLMEMBERS ON ROWS FROM [Model]
Customer Query
WITH MEMBER [Measures].[ParameterCaption] AS
[Customer].[Customer Name].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Customer].[Customer Name].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS [Customer].[Customer Name].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel],[Measures].[Amt]} ON COLUMNS,
nonempty([Customer].[Customer Name].ALLMEMBERS,[Measures].[Amt]) ON ROWS FROM ( SELECT ( STRTOSET(@LocationName, CONSTRAINED) ) ON COLUMNS FROM [Model])
Regarding parameter settings on General tab for both the above parameters we did not select any of the following values, all these checkboxes are empty:
Allow Blank Value ("") , Allow null value, Allow multiple values.
I think it has something related to [Measures].[Amt] that we used in customer parameter. We are now trying to take other two parameters where we would be not using the [Measures].[Amt] to filter the data. Will update you soon.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Single select option in table view as radio button without design

Hi,
When I use the Content design = "Design2002" or design = "Design2003" then I get a checkbox in table view by giving the single select option. But when I do not use any design for the Content then I get a radio button in the table view.
How do I get a radio button in the table view with Content Design = "Design2002" or design = "Design2003"?
Message was edited by: Brian McKellar
Assume you are asking about design=2002 versus 2003? Updated question.

Hallo Sachin,
Later this afternoon I will check your question with a colleague for an answer. We are all offsite today.
Until then, it would be good if you review your questions Tableview radio button event..
++bcm

Inserting multiple selection from checkbox in to one column of the database

Hi,
how to insert multiple selection from checkbox into one column of the database.(I select array of values from checkbox ,then how to insert tat array of values iinto single column name).
Anyone can u reply me
Thanx

hhhmmm.... is this what you mean?
lets say you hava a checkbox1 with values value1, value2, value3 and you selected all there of them? then you want then to be stored in the database in one column?
now the question is:
Is it going to be one column one row?
datafield
value1,value2,value3
Or one column multiple row?
datafield
value1
value2
value3
Which is it?

Selecting data from Multiple Partitions in a single select stmt.

Hi all,
My Database is very large & my tables are partitioned.
My question is:
1) If my data is spread across multiple partitions, is there any way to select data from multiple partitions in a single query?
If we dont mention partition name also it works fine, but perofmance wise it will be very slow. (Using EXPLAIN PLAN)
(Note:I dont want to make use of Union concept, i want to do it in a single select statement)
For ex:
qry1.sql:
select empno from emp_trans partition (P012000)
This above query(qry1.sql) will work fine.
qry2.sql:
select empno from emp_trans partition (P012000,P022000)
The above query(qry2.sql) will return will return the following error:
ORA-00933: SQL command not properly ended
If anybody has any solution for this, pls mail me immediately.
Thanks in advance
bye
null

All my queries are dynamically generated. All my tables are also indexed partition wise based on date field. My question is, if i want to mention multiple partition names at the time of generating my query(select), then with parformance will be good. I have refered some books, inthat what they say is to use UNION concept, i dont want to use that, instead i want in a single select statement.
Thaks for ur reply
Bye
null

Looking for a best query for multiple IF Else statement in a single select

Hi
I want to run multiple IF Else statements in a single select SQL, each statement is one SQL operating on the same table, what is the best way to write this select SQL query ?
If it is PL/SQL, when i get the result from the first IF statement I will skip the remaining execution, and so on... Can any one help me on this.
Thanks in advance !!

965818 wrote:
I Apologize, the information i have given might not be enough.
This is my scenario,
I am selecting set of rows from the table for the employee id. After selecting those records,
i need to go through the result list and check the condition 1, if it is met, i will return that employee record.
If that condition 1 is not met, then i need to go through the condition 2. If that is met, i will return that record.
Like wise, i have four conditions.
I am trying to achieve this in a single sql. If i am not clear, please let me know.Not fully clear yet, but the picture is better already. The thing with SQL is that you should stop thinking procedurally. Instead think in data sets.
For example if the task is:
Find all managers that work in sales.
Procedural thinking would work like this:
pseudo code
Loop over all employees that work in sales
   for each row
       check if it is a manager
           if manager
              then return record
           else
              do nothing
           end
end loopThinking in datasets will result in a different logic
pseudo code
select all employees
where department = SALES
and job = MANAGERThis advantage here is that all the "Do nothing" loops are not needed. Those are already eliminated by the database.
So what is needed to help you? Give the full picture. What is your task that you try to solve. From a business perspective.

Selecting the Checkboxes on Interactive Report

Hello
I have two checkboxes on a Interactive Report:
My query is as follows:
select
apex_item.checkbox(1, empno, 'ENABLED'),
apex_item.checkbox(2, deptno, 'ENABLED'),
ename,
sal
from emp;
I have a conditional button 'Check N Update' which will invoke the Pl/SQL process:
FOR i in 1..APEX_APPLICATION.G_F01.count
LOOP
l_empno := APEX_APPLICATION.G_F01(i);
UPDATE XXX ....;
END LOOP;
FOR i in 1..APEX_APPLICATION.G_F02.count
LOOP
l_empno := APEX_APPLICATION.G_F02(i);
UPDATE XXX ....;
END LOOP;
What I need is I need to check a CONDITION, if BOTH the checkbox's are selected then I need to throw an ERROR saying.
YOU CANNOT SELECT BOTH the boxes.
Please let me know how can I get this.
Appreciate your help.
thanks

Hi
Using a RadioGroup would actually create one radio button for each line and mean that you could only select one line.
As the submit process will only return the boxes that have been checked, you only have access to the ticked items and as these contain just the EMPNO and DEPTNO values, you have no way to check if any two are from the same row.
This means that you will have to rethink your report slightly. You will need to have two checkboxes with ROWNUM as the value (if the report is sorted somehow, this may make this more awkward as ROWNUM is from the unsorted data) and make your EMPNO and DEPTNO hidden fields. The when the user submits the page, you will have to compare the ROWNUM values for the first column with all the ROWNUM values for the second column to see if there's a match.
As an alternative, you could have a select list for the first item and give the user options for EMPNO, DEPTNO, Both, Neither?
Andy

How to get selected record details when single selection is used in a table

Hi All,
Inside a query region I have created a table using region wizard,for this table I have added a singleSelection Item. What I want is , on selection of a particular record i want to update or view that record in a new page , for this I have added update and view icons in each row.
But I am unable to get the particular selected record
OATableBean tableBean = (OATableBean)webBean.findChildRecursive("ResultTableRN");
OASingleSelectionBean singleSelection = (OASingleSelectionBean)tableBean.getTableSelection();
For this singleSelection object I was unable to find any method which will give the value of the view attribute associated with it.
Anybody any suggestions regarding it ?
Thanks in advance,
Anant NImbalkar.

Hi Anant,
here is how you have to do it
1) you need to enable PPR on that Singl selection , by changining the Action type =fireAction.
2) define the envent , EVENT
3) define paramters for that event. This is place that gives you handle to the Attribute of VO.
So you can define paremters such
Name = PARAM1
value =${oa.EqxContactPrivEOVO1.ContactPrivilegeId}
You can define as many paramters as you can for the vo field that u wanted to have.
Now in the procesformRequest() , all you do it handle the event EVENT and get the parameters
if ("EVENT".equals(pageContext.getParameter(EVENT_PARAM)))
String accountid= pageContext.getParameter("PARAM1");
You can refer developer guide for further details.

HOW CAN I USE MULTIPLE INNERJOINS IN A SINGLE SELECT STATEMENT?

HI,
I AM SHABEER AHMED,
I AM GETTING AN ERROR WHILE I ATTEMPT TO EXECUTE A SELECT STATEMENT WITH MULTIPLE INNER JOINS . BECOZ I WANT TO FETCH ITEM DATA, PARTNER DATA BASED ON HEADER DATA .
THEN OF COURSE I HAVE FETCH DATA FROM VBAK VBAP VBKD SO LZ SEND ME THE SOLUTION.
BYE

Hi,
1.Just see this:
SELECT * INTO CORRESPONDING FIELD OF TABLE itab
FROM t1 INNER JOIN t2 ON t1f4 EQ t2f4
INNER JOIN t3 ON t2f5 EQ t3f5 AND
t2f6 EQ t3f6 AND
t2f7 EQ t3f7.
2.But better to use for all entries.It increases the performance.
FOR ALL ENTRIES
Tabular Conditions
The WHERE clause of the SELECT statement has a special variant that allows you to derive conditions from the lines and columns of an internal table:
SELECT ... FOR ALL ENTRIES IN <itab> WHERE <cond> ...
<cond> may be formulated as described above. If you specify a field of the internal table <itab> as an operand in a condition, you address all lines of the internal table. The comparison is then performed for each line of the internal table. For each line, the system selects the lines from the database table that satisfy the condition. The result set of the SELECT statement is the union of the individual selections for each line of the internal table. Duplicate lines are automatically eliminated from the result set. If <itab> is empty, the addition FOR ALL ENTRIES is disregarded, and all entries are read.
The internal table <itab> must have a structured line type, and each field that occurs in the condition <cond> must be compatible with the column of the database with which it is compared. Do not use the operators LIKE, BETWEEN, and IN in comparisons using internal table fields. You may not use the ORDER BY clause in the same SELECT statement.
You can use the option FOR ALL ENTRIES to replace nested select loops by operations on internal tables. This can significantly improve the performance for large sets of selected data.
Example for ALL ENTRIES
DATA: TAB_SPFLI TYPE TABLE OF SPFLI,
TAB_SFLIGHT TYPE SORTED TABLE OF SFLIGHT
WITH UNIQUE KEY TABLE LINE,
WA LIKE LINE OF TAB_SFLIGHT.
SELECT CARRID CONNID
INTO CORRESPONDING FIELDS OF TABLE TAB_SPFLI
FROM SPFLI
WHERE CITYFROM = 'NEW YORK'.
SELECT CARRID CONNID FLDATE
INTO CORRESPONDING FIELDS OF TABLE TAB_SFLIGHT
FROM SFLIGHT
FOR ALL ENTRIES IN TAB_SPFLI
WHERE CARRID = TAB_SPFLI-CARRID AND
CONNID = TAB_SPFLI-CONNID.
LOOP AT TAB_SFLIGHT INTO WA.
AT NEW CONNID.
WRITE: / WA-CARRID, WA-CONNID.
ENDAT.
WRITE: / WA-FLDATE.
ENDLOOP.
INNER JOINS
In a relational database, you normally need to read data simultaneously from more than one database table into an application program. You can read from more than one table in a single SELECT statement, such that the data in the tables all has to meet the same conditions, using the following join expression:
SELECT...
FROM <tab> INNER JOIN <dbtab> AS <alias> ON <cond> <options>
where <dbtab> is a single database table and <tab> is either a table or another join expression. The database tables can be specified statically or dynamically as described above. You may also use aliases. You can enclose each join expression in parentheses. The INNER addition is optional.
A join expression links each line of <tab> with the lines in <dbtab> that meet the condition <cond>. This means that there is always one or more lines from the right-hand table that is linked to each line from the left-hand table by the join. If <dbtab> does not contain any lines that meet the condition <cond>, the line from <tab> is not included in the selection.
The syntax of the <cond> condition is like that of the WHERE clause, although individual comparisons can only be linked using AND. Furthermore, each comparison must contain a column from the right-hand table <dbtab>. It does not matter on which side of the comparison it occurs. For the column names in the comparison, you can use the same names that occur in the SELECT clause, to differentiate columns from different database tables that have the same names.
The comparisons in the condition <cond> can appear in the WHERE clause instead of the ON clause, since both clauses are applied equally to the temporary table containing all of the lines resulting from the join. However, each join must contain at least one comparison in the condition <cond>.
Example for INNER JOINS
REPORT demo_select_inner_join.
DATA: BEGIN OF wa,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
fldate TYPE sflight-fldate,
bookid TYPE sbook-bookid,
END OF wa,
itab LIKE SORTED TABLE OF wa
WITH UNIQUE KEY carrid connid fldate bookid.
SELECT pcarrid pconnid ffldate bbookid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( spfli AS p
INNER JOIN sflight AS f ON pcarrid = fcarrid AND
pconnid = fconnid )
INNER JOIN sbook AS b ON bcarrid = fcarrid AND
bconnid = fconnid AND
bfldate = ffldate )
WHERE p~cityfrom = 'FRANKFURT' AND
p~cityto = 'NEW YORK' AND
fseatsmax > fseatsocc.
LOOP AT itab INTO wa.
AT NEW fldate.
WRITE: / wa-carrid, wa-connid, wa-fldate.
ENDAT.
WRITE / wa-bookid.
ENDLOOP.
Regards,
Shiva Kumar(Reward if helpful).

Visual Composer 7.0.1 (EHP1) - Value Help only shows "Single Selection"

I tried to add a value help to a field that allows multiple selections. However, when I used the wizard through "Add Value Help" drop-down menu, I can only see one proposed selection - "Single selection". However this SAP help document (http://help.sap.com/saphelp_nw70/helpdata/en/b5/036d391f074f769e00602634ee9960/content.htm) mentioned about the "Multiple selection" option. What I can do to make this selection available?
I am using VC 7.0.1 (EHP1). Thanks for any helps in advance.
Kelly

Hi
Are you using 'BI Query' as 'data Service'? & are you creating value help for variable? If Yes -
Create necessary variable as 'Multiple Single Options' in your BEx query & then create value help in VC. Then it will allow multiple options or interval values.
Regards
Sandeep

How to select a row in a single-select table view?

Hello folks,
I have a table view with a 'details' button. When a row is selected and 'details' is pressed, the table view disappears and a form view is displayed (like the toggle button in PCUI). I have implemented this using a navigation link. When I press 'cancel' in the form view, another navigation link takes the user back to the table view.
My problem is, when the table view reappears, there is no row selected (the row that was selected previously, is de-selected). How do I make sure that the row remains selected?
I tried using the collection_wrapper->mark() method in the inbound plug of the table view, but it works only for multi-select table.

Hi Masood,
Thanks for your reply.
I had already tried using MARK ( iv_index = lv_index ), but it did not work because the first statement in the MARK method is
check ME->MULTI_SELECT = ABAP_TRUE.
Mine is a single-select table. So, using the MARK of the iterator object, with either the IV_BO or the IV_INDEX parameter also does not work. Is there any other way for a table with single row selection?
Thanks!!!
Rohan.

Radio button in three column in a single selection-screen

Hi,
I am trying to create radio buttons with three column within a single selection-screen.
I.e.
Column 1:
radio1
Column2:
radio2
radio3
column3:
radio4
radio5
radio6
Also I wish to give three names(as headers) to each columns.Is is possible?If yes how?

Hi,
write as :
SELECTION-SCREEN COMMENT /1(50) text-001.
PARAMETERS: r1 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN COMMENT /1(30) text-002.
PARAMETERS: r2 RADIOBUTTON GROUP rad1,
            r3 RADIOBUTTON GROUP rad1.
SELECTION-SCREEN COMMENT /1(30) text-003.
PARAMETERS: r4 RADIOBUTTON GROUP rad1,
                         r5 RADIOBUTTON GROUP rad1,
                         r6 RADIOBUTTON GROUP rad1.
Regards,
Srini.

GetSelectedRowKeys() returns more than one on Single Selection Tree Table

Hi,
I found that this issue occurring after PS3 (I think.)
I have a tree table component, which allows single row selection. There is a listener on a column of the tree table as follows:
public void listenPackageUnit(ValueChangeEvent valueChangeEvent)
Object oldKey = getTreeComponent().getRowKey();
try
* Retrieve index of selected package unit
* NOTE: Subtract 1 to remove no selection value. This only
* needs to be done if attached LOV has No Selection option set.
if (valueChangeEvent.getNewValue() != null)
Row row = null;
String selectedPackageUnit = null;
int packageUnitIndex = (Integer) valueChangeEvent.getNewValue();
packageUnitIndex--;
* Due to the no selection item, we need to prevent search of regular
* iterator if index is < 0. In this case we know the user selected
* the no selection (blank) value.
if (packageUnitIndex >= 0)
* Using index, determine the value of the selected package unit
DCIteratorBinding packageUnitsIterator =
(DCIteratorBinding) PasUiADFUtil.resolveExpression("#{bindings.PackageUnitsIterator}");
Row newRow =
packageUnitsIterator.getRowAtRangeIndex(packageUnitIndex);
selectedPackageUnit = (String) newRow.getAttribute("LookupCode");
RowKeySet selection = this.getTreeComponent().getSelectedRowKeys();
if (selection != null && selection.getSize() > 0)
for (Object facesTreeRowKey: selection)
this.getTreeComponent().setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding) this.getTreeComponent().getRowData();
row = rowData.getRow();
setSelectedLabel((String) row.getAttribute("Label"));
setSelectedLabelType((String) row.getAttribute("LabelType"));
row.setAttribute("PackageUnit", selectedPackageUnit);
getTreeComponent().setRowKey(oldKey);
finally
getTreeComponent().setRowKey(oldKey);
The issue is that getSelectedRowKeys() returns more than one when the user selects a child row in the tree table.
It seems to be returning the total number counting from the top parent through the child.
(For example, if the child is the second generation, it returns 2, and if the third generation, it returns 3.)
This is causing the issue that the method tries to update the attribute of the parent row with a value for the child row. (And it fails, because the attribute is updateable only while new.)
I remember getSelectedRowKeys() always returned one, the selected child itself, when I coded this around October, 2010.
Is this a design change after PS3? Why does it return more than one though the tree table is for single selection?
How can I get around this issue?
It would be truly appreciated if we can get any quick help, since we are at final testing phase of our product.
Thank you,
Tomo

Hi Vinod,
I found the solution. Thank you very much for your suggestions. :)
Now my listenSelection (custom listener of the tree table) looks like below:
public void listenSelection(SelectionEvent selectionEvent)
Row currentRow;
PasUiADFUtil.invokeEL("#{bindings.TransactionLabelTopLevelVO1.collectionModel.makeCurrent}",
new Class[] { SelectionEvent.class },
new Object[] { selectionEvent });
Object oldKey = getTreeComponent().getRowKey();
try
if (this.getTreeComponent() != null)
RowKeySet rks = this.getTreeComponent().getSelectedRowKeys();
Iterator keys = rks.iterator();
while (keys.hasNext())
List key = (List) keys.next();
this.getTreeComponent().setRowKey(key);
JUCtrlHierNodeBinding node =
(JUCtrlHierNodeBinding) this.getTreeComponent().getRowData();
if (node != null)
currentRow = node.getRow();
if (currentRow != null)
this.setSelectedRow(currentRow);
setSelectedLabel((String) currentRow.getAttribute("Label"));
setSelectedLabelType((String) currentRow.getAttribute("LabelType"));
String shippedItemFlag =
(String) currentRow.getAttribute("ShippedItemFlagValue");
if (shippedItemFlag != null && shippedItemFlag.equals("1"))
setDisableAdd(true);
else
setDisableAdd(false);
finally
getTreeComponent().setRowKey(oldKey);
/* Refresh Action menu and buttons */
RequestContext.getCurrentInstance().addPartialTarget(this.getActionMenu());
RequestContext.getCurrentInstance().addPartialTarget(this.getToolbar());
And my tree table is like below:
<af:treeTable value="#{bindings.TransactionLabelTopLevelVO1.treeModel}"
var="node" rowSelection="single" id="tt1"
contentDelivery="immediate" fetchSize="25"
emptyText="#{bindings.TransactionLabelTopLevelVO1.viewable ? commonFoundationMsgBundle.NO_DATA_TO_DISPLAY : commonFoundationMsgBundle.ACCESS_DENIED}"
selectionListener="#{pageFlowScope.MaintainTransactionSerialAssociationBean.listenSelection}"
binding="#{pageFlowScope.MaintainTransactionSerialAssociationBean.treeComponent}"
summary="#{maintainAssociationUiBundle.CONTAINER_SERIAL_HIERARCHY}">

The listener is now always getting the currently selected row only.
Tomo

LOV single selection list is not working in my JDeveloper 10.1.2.3

Hi!
I'm stumped with this. I'm also new to JDeveloper. I used the sample tutorial from the OTN website entitled "JSPDataBoundLists.jws" to learn how to create drop-down lists in JDeveloper.
My problem is I created a single selection list LOV from DepartmentListView Data Control and pasted it into an EmployeesView Input form. This is so I can just select the Department names to populate the DepartmentID field in Employees table. I setup the data binding in the UI Model of my jsp using the "List Binding Editor". I checked the UIModel file and it looks as follows:
<DCControl
id="DepartmentId2"
SubType="DCListSingleSel"
IterBinding="EmployeesViewIterator"
DTClass="oracle.adf.dt.objects.JUDTCtrlListLOV"
ApplyValidation="false"
isDynamic="false"
ListOperMode="0"
ListIter="DepartmentsListViewIterator" >
<AttrNames>
<Item Value="DepartmentId" />
</AttrNames>
<ListAttrNames>
<Item Value="DepartmentId" />
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="DepartmentName" />
</ListDisplayAttrNames>
</DCControl>
I run the jsp, selected a value from the drop-down list, do a submit and do a commit, but the DepartmentId from the DepartmentsListView was not stored in Employees. What is wierd here is that there is an exact same single selection list defined a row above mine which is working fine. How come that one is working and mine is not?

Eureka! I finally found the answer to my own question!
This simple problem of adding a drop-down list into a jsp page cost me 3 whole days (around 24 full working hours) to find the answer. Normally it only takes me a few minutes with the other web app languages I've learned. And I just stumbled into the answer just a few minutes ago (maybe all thanks should be given to God whom let me stumble into the answer since me and my wife have been praying for several weeks now ever since I started trying to learn Oracle JDeveloper. It is really very very difficult and time consuming to learn compared to other web app languages and tools).
Anyway, the reason why my LOV does not work in my jsps using JDeveloper 10.1.2.3 is because JDeveloper 10.1.2.3 seems to allow only one input-form-element for the same field of the input table!
For example, what happened to me was I had an input form created for the Employees table in the HR schema. I did this simply by drag-and-drop from the "Data Control Palette". This feature I like very much with JDeveloper. It is really easy and works instantly. And then, I drag-and-drop the departmentname field from the Departments table as a "single selection list" into the jsp and setup its bindings. So when I run the jsp, viola! The drop-down list does not populate the DepartmentId field of the Employees table. IT DOES NOT WORK! I've tried reinstalling both JDev and Oracle db and JDKs to no avail! I tried posting in this forum to no avail! I tried experimenting with newly created jsps to no avail! Then suddenly after repeatedly experimenting on this on different tutorials, guides and my own web app, it works! Why did it work? It was because I tried to add an LOV-single-selection-list on another sample tutorial with a READ-ONLY FORM on the jsp! Thus only the LOV is the input-form-element in the jsp for the table's field.
So why can't you find such a simple and basic fact anywhere in the web, the tutorials, guides or the forum? I do not know. Maybe only I am using such an old version of JDev? But what about the users who used it when it just got out a couple of years ago? Didn't they have the same problem? Anyway, it seems like the answer to a lot of my simple basic questions about JDeveloper is not documented, or is buried very deep beneath all the other words of all these documents. Hopefully JDeveloper's documentations would get a lot easier to use very very soon!

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Single selection of checkbox

Similar Messages

Maybe you are looking for