Single shipment for Two materials

hi ,
the scenario is we have a situation
whre two material are made in two diffferent plants
but the customer orders these two materials in a single sales order
normally what happens is when ever tihis situation occurs, the material which is manufactured in plant B is sent to plant A and in plant A both the materials are consolidated and sent in a single shipment
we need to automate this process
when ever we enter both the materials the system needs to know that the second material which is manufactured in plant B needs to be sent to Plant A
and the delivery for the material in plant A has to wait until the material from plant B comes.
When you create sales order for two materials, the stock transfer should happen automatically.
Thanks
Munna

hey
why do you need the automation? i mean when you can solve it through standard..
you can go through MMSTO . as material is maintained in different plants and you ll be sending the goods through the Shipping point maintained at Plant A ( where material A is produced) right? but if you ve 2 shipping points the delivery will split but still you can send it through single shipment iff you ve a single transportation planning point... give a thought there is no need of automation unless the organisation say so...
hope it has helped u a bit
regards
chetan

Similar Messages

Can I create a single PO for two company codes

Hi
Can I create a single PO for two company codes. Though I know that Company code is assigned at header level but still I know there is a setting in controlling which when activated two company codes under same controlling area can procure the goods under the same PO.But i forget from where to activate that message or control in config.
Thanks

Hi Lekhram,
I'm just beginner so maybe I got the wrong end of the stick.
If you order something that something must belong to a definite company > plant. How could possess two company the same thing at the same time (totally)?
(companies are at the same organisational level - none of them is subject to the other).
Maybe I'm mistaken.
So I <b>guess</b> you can use only one company code for one PO.
Controlling area & company code
http://help.sap.com/saphelp_46c/helpdata/en/e5/077a704acd11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/08/513f4b43b511d182b30000e829fbfe/frameset.htm
Purchasing & organisation
http://help.sap.com/saphelp_46c/helpdata/en/75/ee0a9555c811d189900000e8322d00/frameset.htm
All the best
Csaba

Can we create a single bdc for raw materials , and for some other transacti

hi
can we create a single bdc for raw materials , and for some other transaction? how?

Hi Jyothsna
For one transaction you will have to build your bdc table according to the recording for that transaction and then call that transaction using the bdc table. For another transaction , you will again have to build the bdc table with the details of that transaction.
You cannot call all at one shot.
Cheers
shivika

Single PR for multiple materials thru MRP

Hi,
Is there any setting to achieve a single PR, for multiple materials thru MRP?
Regards,
Sattuj

Hi,
I don't think it is possible to create single PR for Multiple materials through MRP.
Depending upon the Lot size, Individual/collective Indicator in MRP 4 view, you can club the requirements for the same material and have a single PR.
Hope this helps..
Regards,
Siva

Define a single scope for two Custom Lists

Hi,
I have ran into a requirement where i have to create a single scope for two lists 'Employee' and 'Department' .
I tried creating individual scopes and they came up in the scope drop down . For this i gave the scope rule as below :
Both lists are based on Item content type . There are other lists that are based on same content type,Hence I cant create a rule based on CT .How can I create a single scope for both lists .
Thanks,
Grigory

Hi Grigory,
when you create a scope, then add two rules, as the image below shows:
I hope this help.
Thanks,
Victoria
Victoria Xia
TechNet Community Support

Clear Single Payment for Two Invoices

Hi All,
I am working on lock box file.where iam geting the payment information of customer.File contains record type as '1' '2' '5' '6' '4' '7' '8' '9' .They already developed a program based on standard programs like :
RFEBLB00    Import Lockbox File
RFEBLB20    Lockbox: BAI Format Processing
RFEBLB00    Main Lockbox Program
RFEBBU01    Post Temporary Storage Data Call
RFEBBU00    Update Account Statement/Check Deposit Transaction
that program working for Single Payment for Single Invoice.It clear the invoice for Single Payment for Single Invoice.But when they are trying to run for Single Payment for Two Invoices then its not posting.How can i clear the Single Payment for Two Invoices .Is possible to clear the Single Payment for Two Invoices .Please do need ful help ASAP.
Thanks

If the lockbox file being processed by RFEBLB00 has more than one invoices for a single check (i.e. multiple type '4' records for a type '6' record), the payment doc created will be for both these invoices.
Now when you clear the payment doc using FBRA or F.80, both these invoices will be cleared.

Material Ledger for two materials

Hi,
I need to run the Material Ledger for two specific materials. In CKMLCP not have the field to select the materials.
In this case what should I do?
hugs,
Cristiane.

Hi Cristiane,
some steps in CKMLCP also have own transaction codes and these allow to be run fro selected materials
CKMH Single-Level Price Determination
CKMI post closing
multi-level allows the material selection in the parameters when you go to edit - allow postprocessing options
best regards, Udo

How to create a single delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Prerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils

Stocks data is doubled for two Materials

Hi All,
I have 2 materials within a plant, and the closing stock for those materials has gone wrong (doubled in cube).
Fortunately, the correct data is available till my Integration layer DSO (DSO present very next below to the Cube).
so, my DSO data is matching with Source system's MB5B tx code.
since only in cube it is doubled, i thought of going for a selective deletion of these Materials to that specific period. and then selectively loading these materials into the cube again.
But Problem is when i go for selective deletion for the cube, I am not getting any Time Characteristics for selective deleition which is very much required for me. (like 0FISCPER, 0CALDAY are not available.)
Could anyone suggest me how to correct this scenario.
Regards
Dileepkumar Tatti

Dear Dileep
If you are sure that you have problem with only 2 materials, you can try loading a flat file or use the program CUBE_SAMPLE_CREATE to punch in the -ve values for the material which is doubled.
Regards
Gajesh

Not getting single delivery for two sales orders

Hi Sapians,
I am getting one delivery for two sales orders in VL10A. But in another case, out of two sales orders, for one order I went to partner functions and changed the address line of ship to party while creating sales order.(Since for that particular order the ship to address is different). then as usual I proceeded to VL10A. But this time system gives two seperate delivery document numbers instead of one which is given earlier. Can any of the experts help me in this regard.
Thanks for your response in advance.
Raksha Agarval

Hi Raja,
Just now I came out with exact problem. While creating sales order, in the header data partner function tab, if we select the ship to party line item and go for details tab and change the address first line item (that is street number), the same change is also if we do in second sales order also, then if we go for delivery in VL10A, then system gives two delivery documents instead of one.( though, all the requirements are met, like same plant, shipping point, shipping conditions, incoterms.. etc).
Even after meeting the requirements, as per SAP standards also why system giving two delivery documents? is the problem.
Please come with possible reasons
Thanks in advance,,
Raksha.

Single Invoice for two sales areas

Hello SAP Gurus,
I have a scenario that Iu2019ll appreciate if a solution could be proffered
Contractually, a customer requires materials from a company (company code), and these materials will be sold from 2 or more sales areas within the company code. However, a single invoice, which will list the items and their individual prices, is what is required to be given the customer. What solution can I use to resolve this?
Thanks

Hi luqmon
Say you have material - MAT1 ; Customer - 1000 ; 1st sales area is - 1000/10/10 ; 2nd sales area - 2000/20/20
So make sure that the material MAT1 is available in both sales areas
Even customer (KUNNR) is also available in both sales areas . If you have created in 1st sales area then extended it to 2nd sales area.
Maintain same pricing procedure for both sales areas in OVKK
Maintain a access sequence with the key combination Sales orgn / material . and assign the access sequnece to the Pricing (PR00) condition type
Now Maintain the condition record for the material MAT1 in VK11 , with the key combination of sales orgn / material
Now when you create the sales order and do delivery , PGI and when you do billing then you can see the price of the material maintained in that VK11 based on sales orgn
But yours can be solved either with a LIS report also
Regards
Srinath

Trouble opening single port for two local IPs

Hey,
I have multiple computers on my Airport network and want to open Port 6112 on a couple of them. I have been able to in previous versions of Airport Utility, but seem to be unable in this one (I haven't attempted to do this for about a year, so the current layout of port mapping could be a few versions old)
Basically I want to open port 6112 on the local IP adresses: 10.0.1.2 and 10.0.1.7
I have been unable as Airport Utility claims that the port mapping entry already exists. But really it exists only on one of the IP adresses, (10.0.1.7) and the other remains closed (10.0.1.2).
Anyone able to help me out?

You can only map any port to a single IP address.
To get to the 2nd IP address you will need to use a different public port. For example map public port 8112 (instead of 6112) to private port 6112 to your 2nd IP address.

One single account for two or more devices??

I'm about to buy the new iPod Touch 4. I really liked the last version of iPod Touch 3 and I became a big fan of it. So when I knew about the new iPod 4 I start to think to "upgrade" my old iPod Touch 3.
I'm wondering if there's any way to transfer all my apps that I bought in my iPod 3 to the new iPod 4 and keep my account intact. The old one I'll give it to one of my little brothers and I'm wondering if I have to reset the iPod in order to transfer my account to the new one.
Thanks for your time and help!

I'm wondering if there's any way to transfer all my apps that I bought in my iPod 3 to the new iPod 4 and keep my account intact.
Just sync the new iPod, using the Transfer Purchases command in iTunes while the older one is connected if the purchases aren't in the iTunes library.
(54880)

A single monitor for two computers

Can I connect both my new Mac mini and my old PC to a singe monitor?

If your monitor has two inputs (and most do) you can connect one computer to each input, and use the switches on the monitor to switch between the two. If one input is VGA and one is DVI (as is often the case) connect the mini to the DVI input - simply because it will look better!
No extra hardware required.
(Not quite sure what Tomo's concern is at doing this?)

How to set single parameters for two tables?

SELECT GM.GRNNO,GM.GRNDATE,SUM(GS.APPROVED),SM.ISSUENO,SM.ISSUEDATE,GS.ITEMCODE,SUM(SS.ISSUEDQTY)
FROM IMS_GRNM GM,IMS_GRNS GS, IMS_ISSUEM SM, IMS_ISSUES SS
WHERE GM.GRNMSERIAL=GS.GRNSSERIAL
AND SM.ISSUEMSERIAL=SS.ISSUESSERIAL
AND GM.POSTED='T'
AND SM.POSTED='T'
AND GS.ITEMCODE=SS.ITEMCODE
AND GS.ITEMCODE='01-01-02-019'
AND *******
GROUP BY GM.GRNNO,SM.ISSUENO,GM.GRNDATE,SM.ISSUEDATE,
GS.ITEMCODE ORDER BY GM.GRNDATE,SM.ISSUEDATE;
******* here i have to select the data from both the tables between two parameters named :P_1 and :P_2.
the date column in IMS_GRNM is named as GRNDATE.
the date column in IMS_ISSUEM is named as ISSUEDATE.
how to set such parameters???

I think all you need is
Where table1.column1 between :p1 and :p2
and table2.column2 between :p1 and :p2

Single shipment for Two materials

Similar Messages

Maybe you are looking for