Single Sign On WiFi issue

Hi folks!
I've got the most frustrating issue I've ever experienced. Single Sign on for my wireless clients (laptops/tablets). It's literally hit or miss whether it happens or not.
The most recent one is a rebuild of an ASUS T100TA. I installed 8.1 Pro from USB stick and used a USB LAN Adapter to connect the client to the domain the first time and to refresh GPs for the first few hours of use. After that, the device was to go to a
new user who would be able to login via the Wireless settings being rolled out via GPO - see settings below.
Now, I know the profile is 100% correct, as once logged in, the SSID is magically connected (based on the GPO settings to connect immediately, not seen in the image). Users have full access to any/all network services.
But see to log a new user onto the device, I get connecting, then "Unable to connect to SSID. Logging on", and finally the dreaded There are no logon servers available message.
But that's not strictly true either, as all my tested BEFORE
sending to the site/user were successful. And even once on site, one of the admin staff logged in to test it (mustn't have trusted me :/) with 100% success. Logged her in without her ever being logged onto it before. But the following day, when the device's
owner arrived and logged on, the bloody nope train arrived again, and it's been like that ever since. But once I log on with a cached profile, boom, WiFi connects via the GPO settings without an issue. There is another identical device in the same office and
it works without an issue.
Without sounding dramatic, I can find absolutely no one else that has experienced the same issues as I'm having and it's starting to look like the window and ground will be the destination for the wee tablet if it doesn't start to play ball.
Any help would be so appreciated.
Cheers!

Hi Goducks90,
We'd better start your own thread for the others to be better involved. As the issue is different from many aspects.
Also please have a share with the current situation and what steps you have tried for the folks to share a quick and helpful suggestions. We may follow the suggestions in the thread below to ask in TechNet:
How to ask a question efficiently in TechNet forum
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Single Sign On (SSO) Issue

We are running Business Objects Enterprise XI 3.1, SP2 (BOBJ) in a Windows environment and have implemented single sign on for Windows AD. Randomly single sign on does not work for some of our users when either accessing InfoView or when executing a WebI report via an OpenDocument call. These users can log into InfoView using the Windows ID and Password manually. The users also have the u201CEnable Integrated Windows Authenticationu201D option checked in IE.
We have checked the InfoViewApp web.xml and OpenDocument web.xml settings and everything appears to be setup correctly for using sso and vintela (per SAP Note 1251945). Required SPN entries appear to have been made. The maxHttpHeaderSize setting in the Tomcat server.xml is set to 16384. We do tend to make substantial use of Windows AD Groups within our security model.
When the users are unable to login via sso, here is the error stack that appears in the Tomcat stdout.log:
SEVERE: Servlet.service() for servlet action threw exception
java.lang.IllegalStateException
     at org.apache.catalina.connector.ResponseFacade.sendError(ResponseFacade.java:418)
     at javax.servlet.http.HttpServletResponseWrapper.sendError(HttpServletResponseWrapper.java:117)
     at com.businessobjects.sdk.credential.WrappedServletResponse.sendError(WrappedServletResponse.java:30)
     at com.wedgetail.idm.sso.AbstractAuthenticator.setUnauthorizedResponse(AbstractAuthenticator.java:1328)
     at com.wedgetail.idm.sso.MechChecker.authenticate(MechChecker.java:144)
     at com.wedgetail.idm.sso.AbstractAuthenticator.authenticate(AbstractAuthenticator.java:1060)
     at com.wedgetail.idm.sso.AbstractAuthenticator.authenticateServiceTicket(AbstractAuthenticator.java:998)
     at com.wedgetail.idm.sso.AbstractAuthenticator.checkAuthentication(AbstractAuthenticator.java:953)
     at com.wedgetail.idm.sso.AuthFilter.doFilter(AuthFilter.java:122)
     at com.businessobjects.sdk.credential.WrappedResponseAuthFilter.doFilter(WrappedResponseAuthFilter.java:66)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
Before we go about installing SP3 in an effort to resolve the problem, can anyone look at the above error stack and tell us what might be going on here? Would the above error stack be consistent with an Httpheader getting truncated?
Thanks in advance for your help.
Wendell Giedeman

That error is part of a logging bug and not related to your issue. If SSO is working consistently from infoview then it probably is not a web.xml setting either. The most common problems with opendoc have been related to sessions. Are the users using a new IE window or possibly one that had previous documents open? If it is the session issue then SP3 may help as some work has been done in that area. If you are sure the users are using new IE windows for the opendoc calls then more troubleshooting may be required to identify the problem.
Regards,
Tim

Oracle single sign on Synchronization issue

We have pushed the Single Sign on Agent in our enviornment through SMS.With most of the users it seem to be working perfectly alrightAll the applications are listed and being synchronized.The issue is with some of the users we get the applications Greyed.Settings for Synchronization are selected but still its not working.
its only with some of the users,With rest its working perfectly fine.where as the same MSI package have been installed on all the machines.
Any body who have faced the same issue. Help

Hi
In my experience applications are greyed out when their template is available in the local cache and the user does not belong to the group the particular template has been assigned through the Administrative Console. Have you enabled role/group support?
Regards

T440P - Win 8.1 Fingerprint Single Sign on Issue

Hi,
I just bought the T440P laptop, and for some reason it never updated to win 8.1 pro from the CDs that were provided. So I installed Win 8.1 x64 Enterperise with Update (provided by my company). I downloaded all the drivers for win 8,1 x64 from the website and installed them. The issue that i am facing is while following the single-sign on guide i have checked (ticked) everything but when the system boots it asks for my fingerprint (power - on password) and then stops at windows login and asks for it again. Why isnt the single sign on working?
Below images show the settings in the fingerprint Manager Pro 8.01.26(x64). Any help will be apprecaited.
Also the guide says to click the power-on tick over the enrolled finger print. I cannot find this option, is it even possible to power on the machine (T440P) with the fingerprint with win 8.1 x64 ?
Thanks,
Usama

Hi,
Using kerberos authentication, users when logged in to windows environment need not enter any user name or password for logging into portal. Check these links for configurations.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/385bef3bd14241b9c4f36bd779537d/frameset.htm
Regarding SSO between windows and portal
How To Identify which SSO(Windows Authentication ) is Implemented
Regards,
Harini S

Mail, Exchange, Acitve Directory and Single-Sign On Issues

I have a brand new MacBook Air with Mavericks. 10.9.3.
We are using a single sign on account setup for our machines. I enter my exchange log in details to access my account on my computer. It's labeled as a managed mobile account. When I open Mail, it takes forever to connect with the exchange server and download and sync new email. The activity monitor shows it constantly running. I send an email and it takes minutes until it actually sends. When I try to shut down mail I usually have to force quit it to close the app because it's doing some kind of syncing with the server.
I have all the same settings on a Mac Mini running 10.9.3 except I'm using a local user/admin sign-on. No issue there. So I think it's something with the single sign on on my Air. Any help would be appreciated!

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Step by Step to Fix Your Mac
You also have 90 day telephone support from Apple Support.
Apple Support Contact
Apple Support contact - Telephone

Single Sign Issue in Ess

Dear All,
EP7.0 SP9, ECC5
We have an major issue in ESS, The problem is with single sign on.
Here are the scenario's we are using :-
1. We are using "training1" as EP login id and in PA30 in R/3 InfoType 105 and Sub Infotype 0001 The same ID "training1" (Same as EP log in), the portal is picking the data properly and working fine.
2. If we use training1 as EP loginID and in PA30 in R/3 InfoType 105 and Sub Infotype 0001 if we use exeibckk (R/3 ID created for each individual user as communication user),
we are getting error "User TRAINING1 does not exist in this period"
we need to go ahead with the Step2, since all the EP login users are LDAP configured and,it has more than 15 characters, we cannot use EP login ID in InfoType 105 and Sub Infotype 0001
since it is restricted to 12 Characters.
e.g:
EP user ID is - shivakumar_ks ( taken from LDAP)
where as his R/3 or ESS user ID is - P000000002
since the login ID and R/3 ID are different,The system is throwing the error mentioned above.
We map the Shivakumar_ks with P000000002 in the EP Personalize option. But it is
not picking up the mapping. It tried to find the Shivakumar_ks in R/3 and fails.
Even though we are giving the UIDPWD in the system Logon Method.
Can anyone please give me the solution on the above.
Thanks in advane
Ponnusamy P

Hi,
As correctly mentioned here by debasish, most of the iviews in ESS and MSS use JCo Connections but there are some iviews which are IACs.
In this case, you need to configure both JCo connections as well as user mapping. Incase of PA30, which could be an IAC or a transaction iview, you may just focus on User Mapping. But for the webdynpro applications, you would need JCo Connections.
The link provided by Antonio clearly explains the steps. In brief, these are the steps involved:
1) Create System and an alias. Make sure that you use the logon method UIDPW.
2) Using the Personalization link, select a system and give the backend username and password. Save it.
Log off and test if it works.
Hope this helps.
Regards,
Sunil
PS: Reward points for helpful answers.

Single Sign on Issue for new Portal Users

We are implementing ESS on EP 6.0. the architecture is like EP 6.0 - ITS - R/3.
and we want to implement the single sign-on. so that when the users login the portal, the Portal Authenticates the user and then portal uses just the Portal UserID and logs in ITS/R3 without verifying the SAP PWD. Portal ID and SAP ID are same.
The single sign on is working fine for those users who already have an SAP ID.
we need to create new R/3 ID's for the new employees. and we don't wanna let the employees login in directly to R/3.
When we create a new ID in R/3 and login for the first time in R/3, it asks to change the password.
since the new employees won't be using R/3 and they login through portal and b'cos we implemented single signon, the portal tries to login in r/3 using the Portal ID/R3 ID, but the SAP R/3 ID is not actived since the user did not change the password, the SSO is failing.
We didn't wanna assign the R/3 ID a password. since it will be an audit issue.
Can anybody give any suggestions, so that the administrator need not assign a password and the users need not login in r/3 and change the pwd for the first time.
Hope you understand my problem, if u need any clarification, let me know..
Thanks.

Hi Gopi-
You can override the password check when a valid logon ticket is presented by setting the profile parameter:
login/pasword_change_for_SSO 0
using RZ10 in the instance profiles. (Requires a restart of R/3)
This overrides the password prompt/check when the user presents a valid logon ticket.
Hope this helps you out.
Thanks,
Marty

Wireless Network Policy Single Sign On Issue with Windows 8.1 only

I'll try to set this up as best I can. I have a laptop with a fresh Windows 8.1 install on it. It is on my domain, and I have a single GPO applied to it. In the GPO under Computer Configuration -> Windows Settings -> Security Settings ->
Wireless Network Policies I have created a Windows Vista or later policy. In the policy I have configured single sign on. I log into a local account on the laptop and plug it into a wired connection. I then run gpupdate on it. At that point I unplug
the network cable, and log off. Now, from the login screen I click Other user, and it looks like the screenshot below.
Notice that "Windows will try to connect to" is present. I can login using domain credentials, and single sign on works perfectly. Now if I reboot the machine, the "Windows will try to connect to" is gone and single sign
on does not work. If I log in with a local account and log out. The "Windows will try to connect to" is present again. I can login normally using domain credentials, and single sign on works perfectly again.
One other note: I installed a fresh copy of Windows 7 on the same model laptop, and put it in the same OU with that single GPO. Single sign on works perfectly with the Windows 7 machine every time. Including after reboots. Thank you, in advance,
for any advice or comments. I will be happy to provide additional information if it is needed.

I managed to get this to work properly in my environment. I realized that I needed to export the wireless profile from the Group Policy editor and import it on the client (by using Group Policy). I realized this while reading through this article:
https://technet.microsoft.com/en-gb/magazine/2007.11.cableguy.aspx
You can see the "Export..." button in the screenshot posted by keyserag above. Select the profile name, in the Group Policy editor Properties dialog, i.e. the item that keyserag has blurred in his screenshot, then click the "Export..."
button. You will be prompted to save the XML file.
I use Computer Configuration > Preferences > Windows Settings > Files to copy the XML file to the clients:
Destination: %WindowsDir%\WirelessProfileExportFileName.XML
I then use Computer Configuration > Preferences > Control Panel Settings > Scheduled Tasks to run netsh and import the profile:
Action: netsh wlan add profile filename="%WindowsDir%\WirelessProfileExportFileName.XML"
The PCs using my policies are now ready to logon without any need for additional manual actions.
I've left out some detail here, I assume everyone will do something a little different anyway. Let me know if you need more help with this.

Outlook Email Integration proxy issue while using Single Sign-On

Hi All,
This is my first post on the forum, so I'd like to say hello :).
We are using the OEI to attach some e-mails. Unfortunately the Single Sign-On option was not available for us.
Now when SSO supports POST profile it seems like we should be fine. Unfortunately when I try to log in OEI is asking me about proxy credentials - login and password.
I would like to understand on which side GSK or Oracle we need to configure the plug-in and how we can do this. Of course in order to set up proxy.
Thanks a lot, Szymon

I see only two possibilities -
Either update all your LDAP user ids to Upper case
Or Update all your CE user id's and MDM user id's to Lower case.
Thanks,
Shambhu.

Transparent single sign on domain logon / wireless

Hello,
I recently found out about the "single sign on" option in combination with "perform immediatly before user logon" which allows a user to enter wifi credentials and so be able to log on to a domain computer without cached credentials.
It seems like the windows logon screen always shows four input boxes: two for domain credentials and two for wireless credentials.
I would like to get rid of the double credential boxes in the logon screen and make the logon process transparent to users. Their domain and wireless credentials are the same so they have to enter the same information twice.
Is this possible or am I doing something wrong?

Hi,
Thank you for the update, if no further help needed, please mark the proper post as an answer, this may help the others who might encounter the same issue reading this thread.
And if any futher questions, welcome to post in Technet forum.
Best regards
Michael Shao
TechNet Community Support

How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication
Identity provider here is Oracle identity provider
harika kakkireni

Hi,
The following materials for your reference:
Consuming List.asmx on a claims based sharepoint site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
Sharepoint Claims based authentication and Single Sign on
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
Best Regards
Dennis Guo
TechNet Community Support

Sample Application - Single Sign On from PeopleSoft to Infoview

This zip file contains the code which provides the capability of Single Sign On (SSO) from the PeopleSoft portal to the BusinessObjects Enterprise Infoview portal even to the report level. See the documentation in the docs folder for information on what this code does and how to install it within your environment. *********************Update: Please be sure to download this <a href="http://ftp1.businessobjects.com/outgoing/CHF/boXIr2psoftwin_chf.zip">patch</a> (KBase<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1544953&sliceId=&dialogID=14530755&stateId=1 0 14532113">1544953</a>) for the Integration Kit for PeopleSoft software as well. It resolves a security issue with how the PeopleSoft logon token is handled by BusinessObjects Enterprise.

Hello Boris,
The error happens seemingly at the very end of the SSO login. The Infoview screen is created, and after it is all built out the error appears. The error appears before any user interaction and before a report can be run. Clicking OK makes the error go away, but InfoView is not fully functional (folder hierarchy doesn't expand, etc etc).
WAS log file excerpt at time of error:
[5/7/07 15:31:58:926 CDT] 6ace6575 SystemOut O 15811343 [Servlet.Engine.Transports : 15] ERROR com.businessobjects.encyclopedia.uitoolkit.web.ToolkitServlet - Request = /businessobjects/enterprise115/desktoplaunch/applications/init.bouitoolkit
[5/7/07 15:31:58:941 CDT] 6ace6575 SystemOut O 15811358 [Servlet.Engine.Transports : 15] ERROR com.businessobjects.encyclopedia.uitoolkit.web.ToolkitServlet - From = wxpch1-bfqb.cna.com
[5/7/07 15:31:58:941 CDT] 6ace6575 SystemOut O 15811358 [Servlet.Engine.Transports : 15] ERROR com.businessobjects.encyclopedia.uitoolkit.web.ToolkitServlet - java.lang.NullPointerException
[5/7/07 15:31:58:941 CDT] 6ace6575 WebGroup I SRVE0181I: [Desktop Web Examples] [/businessobjects/enterprise115/desktoplaunch] [Servlet.LOG]: java.lang.NullPointerException: java.lang.NullPointerException
 at com.businessobjects.encyclopedia.reportviewer.encyclopedia.EncyclopediaApplication.init(EncyclopediaApplication.java:167)
 at com.businessobjects.encyclopedia.uitoolkit.web.HtmlApplicationFactory.createApplication(HtmlApplicationFactory.java:103)
 at com.businessobjects.encyclopedia.reportviewer.wrapper.InfoViewPanel.init(InfoViewPanel.java:106)
 at com.businessobjects.encyclopedia.uitoolkit.web.HtmlApplicationFactory.createApplication(HtmlApplicationFactory.java:103)
 at com.businessobjects.encyclopedia.uitoolkit.web.ToolkitServlet.doPost(ToolkitServlet.java:265)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
 at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
 at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
 at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
 at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
 at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
 at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
 at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1171)
 at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:676)
 at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:203)
 at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:125)
 at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java(Compiled Code))
 at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
 at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
 at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
 at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
 at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java(Compiled Code))
 at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:458)
This and the other information you've requested can be found in case #302807226.
Thank you for your help,
Brian

Oracle Single Sign on and Oracle Internet Directory

Hello Gurus,
What is the relationship between Oracle Single Sign on and Oracle Internet Directory.
To my understanding, OID is required to install SSO.
If OID already exist, can we just install SSO and go on integrating it to existing OID.
Great Thanks,
vimal jain.
[email protected]

Hi Tim,
I've been working on this and could reproduce the issue with anonymous binds. A fix will be ready in 4.2.1.
So what I really need is the password used for login to pass to the is_member call.The P101_PASSWORD item does not save state. However, you can access the value during submit processing of the login page, for example in the post authentication function of your authentication scheme. People sometimes put code in there to query the user's groups (e.g. with apex_ldap.member_of2) and save them in an application. This item value can then be used in the authorization schemes.
Regards,
Christian

Single sign on and TimeMachine?

I finally sorted out a typo with my AFP server that was interferring with single sign on for clients, only to find that it appears TimeMachine still requires a username and password to do network backups. Is this true, or am I missing something? I was hoping single sign on would solve my user password issues around expiry time, but now I'm starting to fear that's not the case.
May have to look for an easier to manage agent based solution of some sort. Any suggestions (that aren't Retrospect)?

bump?

Single Sign-On and External Applications Portlet

I would like to know how complicated would be to call an External Application with SSO (like Hotmail), outside the External Applications Portlet.
We have defined around 10 external applications with SSO,they worked fine.
but due to look&feel issues, we would like to put them in a content area , like items that when the user clicks, takes them to the external application and performs the single sign-on.
Any advice will be appreciated.
tks!!

Maria, I was experimenting with this last night, to answer your question, and I think a cool way of doing this would be the following:
Create a custom attribute called "App ID" - make this a NUMBER type. This is where the external application id will be stored.
Create a custom item type: "External Application"
You have two options for the base type: either "URL" or "<None>". If you pick URL, then you can have the item contain the URL for fapp_process_login, but this is not advisable because it will require the administrator to type in this long URL every time a new application is added.
If you select base type URL, you should use that URL to let the administrator provide a URL to the application's homepage, or a help page or something of that sort.
Edit the newly created item to set the Attribute and Procedure properties.
Add the "App ID" attribute - no default.
On the Procedure tab, add the following procedures (called as HTTP), each with the App ID passed as "p_app_id":
Login http://server.domain.com/pls/portal30_sso/portal30_sso.wwsso_app_admin.fapp_process_login
Edit http://server.domain.com/pls/portal30_sso/portal30_sso.wwsso_app_admin.edit_fappuser
That's it!
Add the new custom item type to a folder, and all the administrator needs to do is set the title, and App ID for the new item.
Excercise for the Reader
You will notice that clicking on the Edit link will take you to the login server when you are done editing the credentials. To avoid this, pass another parameter to the edit procedure - p_done_url, and set a value for that to point to the page that you want to go to after editing credentials.

Single Sign On WiFi issue

Similar Messages

Maybe you are looking for