Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

Dear All ;
I am Planning to use Movement type 301 ie single step STO Beteeen two different company code at the time of Cutover .Is it a feasible solution ?
I am Currently handling a Org Restructuring Project ,Where one company code will be broken into five different company code ( Including Old Company code ) ,and old som of the stock of old company code needed to be shifted to new 4 company codes .
In this Context i am thinking to use 301 ,will it be a feasible solution ?
I have tested in IDES ,It is working ,But I need to be confirm as there is hudge data to be migrated .
Best Regadsl;
Joydeep Mukherjee

Hi Joy,
You can do this in one step as you already have tested in IDES, but depends on your business requirement that in which way you want to handle your stock transfers either by using one step or two steps movement types or by using stock transport orders. Using STO is a good approach for stock transfers between two company codes.
See the below link:
http://help.sap.com/saphelp_45b/helpdata/en/a5/63391843a211d189410000e829fbbd/content.htm
regards,
anoop Singh

Similar Messages

Stock transfer across company code

Hello Expert,
I have one business requirement that is to transfer the stock from plant belongs to compnay code "A" to plant belongs to compnay code B. Stock transfer within company code from one plant to other is possible but is there any way to transfer the stock from one compnay code to other company code plant?
Please share your experience.
Thanks in advance.
Wih Best Regards,
Shyam

You can refer to lots of link for Intercompany Stock Transfer process wherein you can transfer material from one company Plant to another companies Plant. One of the link attached for ready reference.
Re: Inter Company Stock Transfer Order
S. Kumar

Inspection lot with 01 origin for stock transfer (Intra company STO)?

Hi Sap Gurus,
As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
Thanks in advance
Venkat V

Hi All,
Thanks for your replies..
Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs.
Thanks in advance
Venkat V

Change default mvt 311 for stock transfer reservation generated by system

Dear SAPper,
I used storage location '0003' planned seperately in material master MRP4 and set reorder point 100 and replenishment 100 too.
After the stock fall below 100 the system will create stock trasnfer to '0003' the 'from storage location' is still blank. the system used movement type 311
i want to used two step transfer 303 - 305 for this transfer.
of course 303 can not be used to reservation so i create customized mvt type 903 (copy from 303 and modify it)
but something still trouble is when the MRP generate reservation it always use 311 movement tpe
can i customized that when storage location planned seperately stock fall below reorder point, MRP generate resevation transfer with mvt 903 (not standard 311)
Please kindly help
Best regards,
Freddy Ha

hi,
actually there is 2 problems here
1. 303 two step is prohibited for reservation so i create 903 to be used in reservation for two step transfer with reservation
2. reservation is created automatically for storage location plan seperataly if the stock fall below reorder point, this problem is system always use movement type 311 sloc to sloc
i want to used two step sloc to sloc, so the reservation created using 903
can i configure it?
Best regards,
Freddy ha

What is the movement type on stock transfer across company codes

<Deleted original post contents and retypes in capitalized letters - moderator >
What is the movement type at the time of stock transfer between the company codes..
Edited by: Arun Varadarajan on Sep 1, 2008 10:56 PM

HI,
Stock Transport Orders : -
1. Plant to Plant one Step - Transfer Posting using Mvt Type 301
2. Plant to Plant two Step - GI:303 & GR: 305
3. Stock. Transport Order. w/o SD - GI: 351 & GR: 101
4. Stock. Transport Order with SD - GI: 641 & GR: 101
5. Stock. Transport Order with billing - GI: 643 & GR: 101
Refer STO's in the below path for more details
http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
Thanks & Regards,
Kiran

Stock transfer between company codes

Dear Experts,
I am doing stock transfer between two different company codes. Purchasing order type wil be NB & SD delivery type will be : NLCC
i have done all w.r.t configuration requirement for between company code, when i go for ME21N, unable to get purchasing order type NB but its showing only UB & item category U. systme giving message like : item category U & pur order type is UB would like to proceed. But it would be for between plants within same company code.
Please assist me where i am doing wrong...
Best Regards
Badari
Edited by: badaripro on Feb 23, 2010 7:15 PM
Edited by: badaripro on Feb 23, 2010 7:15 PM

Dear Badari,
I don't understand. Do you say that you just start ME21N and can only choose order type UB there? In this case it has nothing to do with the question if the STO is cross-company or not, since the system doesn't know the plants yet.
I would assume somebody just deleted the document type NB in your customising or you are not authorised to use it - please start ME21N again, observe the error (can't choose NB), leave the trs and run trs SU53 to check your authorisations.
BR
Raf

Stock transfer between company code

Dear Expert,
in my business transaction, inter company stock transfer is there. For that i am configuration all the things under set up stock transfer order.
Now i am creating purchase order, it is coming fine with shipping data in line item level and i saved.
after that i want to delivery with reference to purchase order in VL10B.
i am giving the purchase order and execute. but there is no line item in VL10B. only blank.
can anyone tell me what is the problem and is there any setting?
Thanks for Advance

Hi,
In VL10B just put the "Shipping Point/Receiving Pt" as input parameter and make blank "delivery creation date" and "CalcRuleDefltDlvCrDt",Try executing and check if your P.O reflecting or not.
Check your shipping point is correct (Delivering plant)
share your findings...
regards,
siraj

STO not working for plants of same company code assigned to a Purchase Org

We have two company code ( A & B ) assigned to a single Purchase Org .
when we are trying to do STO of company code A , we are getting an error message like that
The plant you have entered does not belong to the company code that was
determined via the purchasing organization.
Any suggestion please. we assigned all the plants to the Purchase Org .
Thanks
JJ

Hi,
While creating STO you are entering the plant.
Please check whether that Plant is assigned to the Company code A Error message clearly tells you have assigned the Plant to the company code A
G.Ganesh Kumar

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

No Quality Inspection for Stock Transfer

Hi,
There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
Thank You,
Raymond

Hi
check user exit.
QAAT0001 Inspection type determination different from variant 01
You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
programs in which you can access the master inspection type if necessary.
The inspection lot is then created with the inspection type that was
determined using the enhancement.
logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
For normal stock trnsfer system will create 08.
I hope this will add some value
Regards'
Sujit

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Delivery without reference for stock transfer within the same plant 311

Dear all,
I need to create a delivery without reference for stock transfer within the same plant, movement 311, i.e. just from 1 storage location to another storage location.
I tried to use VL01NO with delivery type UL.
Now my question is how can I assign a receiving plant for a customer?
I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
It's possible this option???
Thank you very much.

Hi,
What is the item category you are assigning while doing VL01NO? Check the schedule line category for that item category assignment. That Schedule line category has an option for one step GI. There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311.
Thanks
Krish.

Material Ledger for Stock Transfer Postings

Hi All,
I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
Material A has a Standard cost of $10
Material B has a Standard cost of $8
During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
Credit Material A -          $1000
Debit Material B -           $800
Debit Price Difference    $200
This price difference of $200 was used in the calculation of Actual cost for material B
However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 8) X 100} and not $200.
Has anyone had a similar issue, or know how the system resolves this (if at all)?
Points will be rewarded for relevance.
Thanks

Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
Thanks

Can't create a delivery order for stock transfer #

Hi All
I stuck with one ticket ...
Can't create a delivery order for stock transfer #
Kindly provide input to resolve this.
Thanks

Hi,
Can you tell us as to what is the issue here? What transaction are you using?
Anyways, check below things:
1. Check for the inputs which must be relevant for the delivery creation
2. Check if table VETVG is updated with the STO number.
Please revert back with more inputs if problem still persists?
Regards
SD

Return for Stock transfer

Hi,
I am trying to setup the return process for stock transfer order. To which plant we have to assign the delivery type. Is there any other settings for STO returns.
Thanks
Balu

Hi
Assign the required return delivery type to
purchasing document category F (purchase order),
purchasing document type (NB - standard purchase order, UB - stock transport order),
the supplying plant (the one to which the goods are being returned)
The following return delivery types are available in the system:
NLR - intra-company-code store returns (purchasing document type UB for replenishment and return orders, delivery type NL for the replenishment delivery)
NCR - cross-company-code store returns (purchasing document type NB for replenishment and return orders, delivery type NLCC for the replenishment delivery)
Please do the customizing in SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Returns Order-> Store Return / Return Plant to Plant
Thanks & Regards
Kishore

Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

Similar Messages

Maybe you are looking for