Single-Tier in Dev / Multi-Tier in Prod - BPC5.1 - are there any issues?

Background: We are a new install of SAP BPC 5.1 and initially planned to have both Dev and Prod as a single tier install. In the Blueprint design review, the recommendation was made and accepted to have production as a Multi-Tier landscape. Due to tight timelines, the customer will go-live on the Production Multi-tier landscape and Dev in a Single Tier configuration. As soon as possible, we will move Dev to a Multi-Tier install as well to synchronise Dev to Prod.
Question: Other than being uncommon, is there any know issues with having this current dissimilar landscape?
Edited by: Penelope Thomson on Dec 17, 2007 12:15 PM

There's nothing uncommon about having a development environment that isn't an exact macth to production. Many clients that have large mutli-server configurations don't invest that much money and resources in thier development environment. The downside is that when you do things such as stress testing, user acceptance testing and other configurations in development, you really have to do them again in production if you want a fully tested environement.
Also, if you have different software components (e.g. 64bit OS in production and 32bit in development) you are dealing with different service packs and other components that can have different issues. I've also run into differences in authentication issues between a simple and more complex environment depending on how the components are arranged.
These should all be issues the technical consultant that is doing the server configurations can discuss with you. The bottom line is you'll want to make sure you have the production environment setup with enough time to do a through testing before go-live. As far as moving the application from development to production, going from a single server to mutli-server shouldn't be an issues as long as you're using server mananger to do the backup and restore.

Similar Messages

Are there any native single-player first person shooters available?

Hi there!
I'm searching for a good first person shooter that runs natively on my Arch64 system.
I know that there are several good first person shooters for Linux available, but i found nothing that gives me something different than deathmatch (well, there ARE several variants of it but in the end all variants are "a bunch of players is in an arena or something like that doing something like killing the other team members or destroying their base, steal their flag etc.").
But i want a single player FPS like Half-Life was. Or like the recently released "Stalker - Call of Pripyat".
Are there any? (FLOSS would be nice but is no must).
TIA!
Dirk

I've been looking for a good native FPS for a few weeks now too. I did try Sauerbraten. It was very impressive, but a little... odd. Of course the graphics and sound were great. The story and narrative impressed me, and reminded me of playing the intro to Half-Life 2.
But the odd thing was... little things. Like, I had the game on the "easy" setting, but still got my butt kicked really quickly. (which caused me to lose items and ammo, and therefore became harder) And the enemies were extremely aggressive, but sometimes would just... stand there, looking at me. It was a little eerie. And I died on the map I was playing in places that I probably shouldn't have, simply because it was confusing. (I saw the "Danger - Electricity" signs as I was landing on the platform with dangerous electricity) And I got stuck in a "hole" that was really hard to get out of. (I had to move a box, jump out of it, and try over and over to jump out) And I spent a lot of time trying to figure out where to go next, and I was just in the first 10 minutes of the level. And enemies seem to take a ton of bullets to kill.
So, to summarize, the graphics and sound and narrative and the "running and shooting" were all very good. But the level design and enemy design and difficulty level were a little off.
I uninstalled it and have been playing Assault Cube for a few days. The only "single player" mode is against bots in an arena, but I'm liking it because it is pretty simple (pretty much just running and gunning) and it is not a "twitch" shooter - people actually move a little more like they do in real life, as compared to something like Quake. I get my butt kicked in both Assault Cube and Quake, but at least I get my butt kicked slower in Assault Cube.
EDIT: I've been thinking about trying Marathon (Aleph One). http://aur.archlinux.org/packages.php?ID=6111 It's a complete FPS. I haven't tried it yet. It's old, but age isn't a problem for me. I still love and play Doom to death.
Last edited by drcouzelis (2009-12-11 22:17:06)

If I want to make a single-frame importer, e.g. - for WebP image format, do I need to implement an SDK importer plugin? Are there any examples?

The title says it all really. Was wondering if there's a simpler interface to implement which does not contain video or audio, but just a still frame image.
I don't care about exporting this format from Premiere, just being able to read a single frame or a sequence of frames to be used as footage.

Hi Rotem,
A standard importer plug-in is the way to go for a still image importer. You could start from SDK_File_Import in the SDK. There is also a WebM plug-in on GitHub:
fnordware/AdobeWebM · GitHub

Are there any patches available for Dev 21

Hi,
We've been working with Forms50 and Reports 25 under win95 for
quite a while and have noticed occasional problems:
- A program abort due to page fault protection under win95.For
example, R30DES32 : R30LIB.dll.
- You issue compile all and get and error that forms is not
able to go to (goto error button).
- A compile error that requires login in and out and
recompile to fix.
I wonder if
- there are any patches available for Dev 21,
- i have a memory shortage problem,
- these are (especially case 1) win95 problems.
Please help will be welcomed ................!
null

Where can I find them?
thanks in advance,
Xiaolin
Jason Judge (guest) wrote:
: There are patches for the 32bit v2.1 Windows environments
dated:
: 24 June 98
: 5 August 98
: 16 September 98
: 21 Octomer 98
: 21 February 99
: and I believe a new one is just out.
: Take your pick!
: JJ
: Luis Medina (guest) wrote:
: : Hi,
: : We've been working with Forms50 and Reports 25 under win95
for
: : quite a while and have noticed occasional problems:
: : - A program abort due to page fault protection under
: win95.For
: : example, R30DES32 : R30LIB.dll.
: : - You issue compile all and get and error that forms is not
: : able to go to (goto error button).
: : - A compile error that requires login in and out and
: : recompile to fix.
: : I wonder if
: : - there are any patches available for Dev 21,
: : - i have a memory shortage problem,
: : - these are (especially case 1) win95 problems.
: : Please help will be welcomed ................!
null

Are there any dev's that can take requests??? Let's bring shadowgate from NES days back!!!!

I've been seeing a lot of kick *** come backs such as ghost's n goblins, elevator action, double dragon and so on. Would there be any dev's interested in recreating Shadowgate from the NES days? This was such a kick *** game back in the day and I can't imagine it would be that hard, but I'm no programmer so I wouldn't really know But if there is a dev out there that remembers and was a fan of this game, I'd be one happy gamer!!!

I would contact Seika who made Shadowgate with the request. Recreations require licensing , permissions, and all sorts of legal tape but if you contact Seika they may help.

Are there any workarounds for multiple PDF files created for a single Word 2011 document?

I am running...
Mac OS X Version 10.6.8
Word for Mac 2011
Adobe Acrobat X Version 10.1.0
I am working with 100 plus page Word documents that go back and forth between portrait and landscape layouts. When I attempt to create an Acrobat PDF document (or one using the native Mac PDF function), I end up with 10 to 15 separate PDF documents. One person suggested that I simple stitch them together, which is an inordinate amount of work as compared to how simple it is do on my PC with older versions of Acrobat and Word. However, I have noticed that the margins are way off and the pagination is off sometimes too. So even this workaround is not the answer. I last talked to Microsoft, Apple, and Acrobat tech support about five weeks ago. Each blaming the other two but saying they were working together to solve the problem. My recent searches of forums has not revealed any solutions nor have updates changed anything.
As I am anticipating the day when my old PC stops working, I am searching for a possible workaround or other solution for this problem.

Thanks for your reply.
The tip-off may be this. In Word 2007 on my pc when I print the document to a printer, Word generates 1 print file for the entire document. If I print to PDF, one print file is generated by Word and Acrobat creates a PDF from this file.
What I just discovered by accident was that when Word for Mac 2011 prints the same Word document to a printer it creates about 10 different print files. So instead of a 100 page PDF document I end up with 10 PDF documents of 1 to 30 pages depending where the page orientation shifts in the Word document. If you print to a printer that is not turned on, you can see all of the files stacked up in the printer queue. I suspect that Word for Mac 2011 generates 10 different print files during the PDF creation process and therefore Acrobat logically creates 10 different PDFs. Unfortunately, there are margin errors and other layout errors in these 10 different PDFs so stitching them together is useless.
I am beginning to think that the way Word for Mac 2011 prints documents is simply incompatabile to Acrobat or the PDF creator that is native to the Mac OS.
I just think that this is a problem that Microsoft is going to have to fix.

Are there any legal issues against sharing a single Adobe Creative Cloud username and password among other coworkers for work related projects?

A coworker of mine shared his Adobe Creative Cloud password and username with me so that I could download Adobe Premiere onto my own work computer to do some video editing projects. Before, I download this onto my computer, I want to make sure there are no legal problems in doing this.

I don't think that is allowed... "A" is allowed 2 activations Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
I don't think you as "B" are allowed to use A's account

Are there any multi-tasking glitches on Safari in iOS 8.1.3?

1/4 of my Safari screen is washed out muted colors. This happens only in Safari. Is there a way to fix this so
I have the whole screen displaying the Safari page ?

Hey Rickma85,
Wow! That definitely sounds weird. Have you attempted to quit the Safari application and restart your iPad? If not, I’d definitely do so:
Force an app to close in iOS - Apple Support
http://support.apple.com/en-us/ht5137
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201559
If the issue persists, the next step would be to back up your device and restore it as new - then test once more (before restoring your backup):
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

Are there any problems with having 3.6 & 5 on same Mac OSX, single profile, but only one version FF open at a time?

Will having two versions of firefox (3.6 and 5) on my computer (Macbook Pro, OS X 10.5.8) at the same time, using the same profile, BUT never running both firefox versions at the same time, only having one at a time open?

In my case it seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore after the FF update. (and yes, my add-ons are enabled - to answer the tech support people's first question).
For me, the coupon printer doesn't even show up in my Firefox "Add-Ons" list anymore. Is that what people typically see when they're saying the coupon printer "doesn't work" with FF? The coupon printer was visible on the add-ons list before my FF update, and now it's totally Gone! It seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore since the FF update.
When I'm on the coupons.com site and I click "print coupons", it tells me I haven't installed the application. But it Is installed on my computer, I can see it in my folders, and it works on IE, so it's definitely there.
BTW - I have uninstalled/reinstalled the coupon printer application. I have tried all the suggestions on the Mozilla help/forum sites, as well as the Coupons.com web site. I have closed and re-started Firefox after the installation. I have also shut down and restarted my pc after installation. I tried installing the application with Firefox open, and tried it again with Firefox closed. I've even cleared out all my cookies/history associated with Coupons.com.
... I can't think of anything else to try, except for the "solution" of using IE for coupons.
If it Really is a problem on the Coupon.com end of things, do you think it's worth it if we bombard the coupons.com support team with messages saying they need to fix the problem? (or just a waste of time?) ;(

SAP BPC 5.1 multi-tier installation

We are implementing SAP BPC 5.1 as a multi-tier installation with 2 Windows servers.
Server 1 - SQL Server 2000 Database , OLAP & Reporting Services
Server 2 - Web / Application & Fileshare
Are there any issues that i need to be aware of with a multi-tier install ?
Service-level accounts for BPC - Do these accounts need to be the same between DEV and Prod. The install giude do not seem to indicate that these accounts have to be the same, however I just want to confirm
We did a trial installation and I get the following error :
Job name : http://wdsectest01vm/osoft/Launch.aspx
Detail : Unable to generate a temporary class (result=1). -- error CS2001: Source file C:Tempa71qdytz.0.cs could not be found -- error CS2008: No inputs specified --
Any help will be greatly appreciated
Thanks
Subha

Hello Subha,
You can test the PTR dns records using nslookup.
I will use db.example.com and app.example.com as the fully qualified domain names below.
Open a command prompt (Start -> Run and type cmd) and type the following
nslookup
app.example.com
note - this should return the ip address of the application server and represents
the host (A) record in DNS. Lets assume it returns an ip of 1.1.1.10
set type=PTR
1.1.1.10
note - this will return the reverse lookup (PTR) record for the ip address and
in this example should resolve to app.example.com
exit
After you complete the nslookup for the appserver do the same for the database servers fqdn (db.example.com).
You should perform this test on each tier. If you run into any inconsistencies then your network/DNS administrator should be able to assist you in getting the appropriate records created.

Sql query to identify transports in dev but not in prod

I use sqlplus to select fields from saperp.e070v so I can compare transports in prod with those in qa. The purpose is to identify those transports that I need to run when I H-copy prod to QA. I'm using this where clause (TRFUNCTION='K' OR TRFUNCTION='W') . Should I look at TRSTATUS? I'd appreciate any recommendations or ideas. I do not have access to ABAP.

Thanks Markus.
Here are the distinct codes I found. Are there any ot these That I need to be concerned about? Is there a Key/Legend for these?
SQL> select distinct trstatus from saperp.e070v;
T
R
D
O
SQL> select distinct trfunction from saperp.e070v;
T
W
R
P
K
D
Q
M
T
X
F
S
T
G
12 rows selected.
SQL> describe saperp.e070v;
Name                                      Null?    Type
TRKORR                                    NOT NULL VARCHAR2(20)
TRFUNCTION                                NOT NULL VARCHAR2(1)
TRSTATUS                                  NOT NULL VARCHAR2(1)
TARSYSTEM                                 NOT NULL VARCHAR2(10)
AS4USER                                   NOT NULL VARCHAR2(12)
AS4DATE                                   NOT NULL VARCHAR2(8)
AS4TIME                                   NOT NULL VARCHAR2(6)
STRKORR                                   NOT NULL VARCHAR2(20)
LANGU                                     NOT NULL VARCHAR2(1)
AS4TEXT                                   NOT NULL VARCHAR2(60)
CLIENT                                    NOT NULL VARCHAR2(3)
SQL>
F
S
T
G
12 rows selected.
SQL> describe saperp.e070v;
Name                                      Null?    Type
TRKORR                                    NOT NULL VARCHAR2(20)
TRFUNCTION                                NOT NULL VARCHAR2(1)
TRSTATUS                                  NOT NULL VARCHAR2(1)
TARSYSTEM                                 NOT NULL VARCHAR2(10)
AS4USER                                   NOT NULL VARCHAR2(12)
AS4DATE                                   NOT NULL VARCHAR2(8)
AS4TIME                                   NOT NULL VARCHAR2(6)
STRKORR                                   NOT NULL VARCHAR2(20)
LANGU                                     NOT NULL VARCHAR2(1)
AS4TEXT                                   NOT NULL VARCHAR2(60)
CLIENT                                    NOT NULL VARCHAR2(3)
SQL>

Are there plans to let single edition users publish to the iPhone?

As the owner of a small publishing business, I was very frustrated to find out that only Professional Edition and Enterprise users can publish to the iPhone. I have a client who is ready to move forward with an iPhone version of its weekly trade publication. However, to do so with Adobe's current offerings would be WAY too cost prohibitive. My client would need about 750 downloads to serve its readership. The publication itself has hardly any graphics and consists of about 10-12 differerernt articles. So, my questions are as follows:
1. Does Adobe plan to let single edition users publish folios for the iPhone?
2. Are there any good alternatives for publishing a simple trade publication for the iPhone?
Thanks

Hi there,
I am a Professional Edition member of DPS and currently publish our magazines on the iPad only. Most of our magazines are free, and thus makes it impossible to afford the $0.30 per download fee that Adobe requires. The only way to do so is to publish everything in single edition and update/overwrite each new issue. This has worked for us, but still limits us to iPad only. The Android, Kindle Fire and iPhone are only available for using the fulfillment service, which again charges $0.30 per download. It is frustrating to me too, as I have been a loyal customer of DPS for two solid years now and they have been "promising" that these will be available in single editions soon. They have said that for two years now.
My point is that Adobe is slow to adding devices to the single edition because they don't make any money off of it. They only make money off of the fulfillment services, so there is absolutely no incentive for them to even "bother" with coming out with single edition versions of any other device. I'm surprised they even offer single edition for iPad.
Which leads me to my point -- I recommend that you find an alternative to using DPS for your iPhone single edition version. If it is simple in design, you can use something like Hype (for mac only) to build as an HTML5 web app and then package it into a native app with PhoneGap.
Here is where you can find Hype: http://itunes.apple.com/us/app/hype/id436931759?mt=12
Here is where you can find PhoneGap: http://phonegap.com/
I really hope this helps! Don't give up on Adobe, because they are a great company and have awesome products, but realistically they are also in the business to make money. I am sure eventually they will come out with different single editon versions of devices that are supported, but it definitely won't be anytime soon.
Let me know if you have any questions or need any help!

Multi tier to single tier

Hi,
I am planning to clone from a multi tier( db+car==>1 and web+forms==>2 ) to single tier.
Which application folders (appl_top,comn_top etc) should I copy?
Shall I copy both or only one will do?

Hi;
What is your EBS and OS?
Please check clone docs:
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1]
Also see:
FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]
Regard
Helios

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Setting up multi-tier SharePoint 2013

Hello Friends,
I would like to set-up multi-tier farm on my VM. I have installed 2 Windows server partitions. Requirement is to set-up SQL server on 1st VM and 2nd VM will act as App server and WFE.
I'm new to this installation stuff, so can you all guide me how to proceed further regarding services to be activated and connecting SQL on 1st VM with CA on 2nd VM

Hi,
Please check those links
Tutorial
https://www.youtube.com/watch?v=_CL-ttdk5cU
already Built trial environment
http://www.matthewjbailey.com/sharepoint-2013-dev-environment/
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Single-Tier in Dev / Multi-Tier in Prod - BPC5.1 - are there any issues?

Similar Messages

Maybe you are looking for