Single-user but nothing else

I have a friends IMac that has been send back from the repair shop - not repaired
It turns on with the chimes and proceeds to the apple logo then flashes black and then stays on a grey screen.
I have tried safe mode - grey screen
Verbose mode - grey screen
Reset nvram - no change
Apple hardware test - no access
Boot via dvd - no access
I can always access single-user mode - the hard drive seems ok and I can access the files

EtreCheck version: 1.9.11 (43) - report generated 26 May 2014 23:32:23 GMT+01:00
Hardware Information:
          iMac (27-inch, Mid 2011)
          iMac - model: iMac12,2
          1 3.1 GHz Intel Core i5 CPU: 4 cores
          8 GB RAM
Video Information:
          AMD Radeon HD 6970M - VRAM: 1024 MB
System Software:
          Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:6:4
Disk Information:
          ST31000528AS disk0 : (1 TB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Untitled (disk0s2) / [Startup]: 999.35 GB (978.15 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5680H
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
          Apple, Inc. iMac
User Login Items:
          None
Internet Plug-ins:
          QuickTime Plugin: Version: 7.7.1
          JavaAppletPlugin: Version: 14.3.0 - SDK 10.7 Check version
Audio Plug-ins:
          iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               1%          WindowServer
               1%          Safari
               1%          fontd
               0%          SystemUIServer
               0%          activitymonitord
Top Processes by Memory:
          106 MB          Safari
          57 MB          WebProcess
          57 MB          mds
          49 MB          Finder
          41 MB          WindowServer
Virtual Memory Information:
          6.27 GB          Free RAM
          796 MB          Active RAM
          159 MB          Inactive RAM
          814 MB          Wired RAM
          209 MB          Page-ins
          0 B          Page-outs

Similar Messages

ACE 4710: Possible to allow a user to clear counters but nothing else?

Hello all,
Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc. We would also like to allow this user to clear the interface error counters as well, but nothing else. Is this possible?
Thanks!

Hello Brandon-
Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats. You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
i.e.
ACE# conif t
ACE(config)# role MyRole
ACE(config-role)# rule 1 permit modify feature ?
AAA             AAA related commands
access-list     ACL related commands
connection      TCP/UDP related commands
fault-tolerant Fault tolerance related commands
inspect         Appln inspection related commands
interface       Interface related commands
loadbalance     Loadbalancing policy and class commands
pki             PKI related commands
probe           Health probe related commands
rserver         Real server related commands
serverfarm      Serverfarm related commands
ssl             SSL related commands
sticky          Sticky related commands
vip             Virtual server related commands
You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
Domains allow you to create containers for objects. You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
Regards,
Chris Higgins

Hard disk turns on but nothing else

Hello, I'm a teacher running a lab full iMacs and I have one giving me problems. When I press the power button I can here the hard disk (or something inside) start running but nothing else happens; no start up tone, no display, nothing. So far I have tried putting the install disk in and holding "C" but this gave me zero response and now the disk won't eject. I have, if I am remembering the terms correct, tried reseting the the SMU and SMC and still got nowhere. Any help someone can give me would be greatly appreciated!
God bless!

HI and welcome to Apple Discussions...
Try starting up in single-user mode and then running fsck:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Carolyn

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

When I power up my mac, I see the white screen and the apple icon. After a few seconds of powering up the screen goes dark. Yet I still can the mouse arrow but nothing else.

When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?

Try this from another user:
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

My first gen 3g iphone photos are not recognised by camera wizard - it sees the phone but nothing else no files - it is not locked - ?

I have a new 4g Iphone - Telstra (Australia) disabled my old 3g and enabled the 4g so the 3g is just enabled to show contacts and photos etc.
I want to download my photos and contacts from the 3g. trouble is that my internet is dial up only at home and impossible to use as too slow.
So my itunes is now out of date (not current module 10.5 + etc.) and the 3g phone is also not operating on the latest ios.
BUT the itunes does sync the phone - but it seems to only sync from computer to phone - so my camera roll on the 3g is not on my computer - therein lies the dilemma - I don't know how to download the photos. I cannot update the ios on the 3g and it seems that might be reqired to "back up"
So first question is how do I back up (not sync) my 3g to itunes.
Do I need to updates its ios first and update iteuns first (in which case thats impossible)
So what else could I do.
It seems the other thing is that even if I could back up the 3g the Itunes won't recognise the 4g as the 4g is ios 4 or something and the itunes is not up to date.
SO I thought I should just use camera wizard or a photo package like iphoto or kodak easy share.
But with camera wizard my computer recognises the 3g phone BUT nothing else. It is greyed out for options, and ini Windoes Explorer it shows it as a camera but when you right click it has no "properties" - and no files show up at all...
it is like it seems the camera and then nothing else.
THE CAMERA is not locked.
WHAT shoudl I do?

also - when I use camera wizard it just tells me the phone is busy or in use and I should retry.
If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

Hello,
See if it'll Safe Boot from the HD, (holding Shift key down at bootup).

Under TV Shows there used to be favorates, search and so one, for reason, just "My TV Shows" shows up but nothing else.

Under TV Shows there used to be favorates, search and so one. for some reason, just "My TV Shows" shows up but nothing else. I can't look up top shows, look at my fav shows, or even search up shows any more. I restored my apple tv factory settings but it was still missing. Pior to doing that I pulled the power cord and reset my networks... and still noting, please help....

Welcome to the Apple Community.
Yes there are quite a few similar reports at the moment, I haven't experienced the problem, yet others in the UK have, so we're not quite sure what criteria determines whether you are affected by this. I haven't seen any solutions so far, so it may just be a case of waiting to see if it's repaired or whether the rest of us are going to see the same thing.

The bookmark feature has stopped working, I can only bookmark my homepage (google search) but nothing else.

Firefox is simply unresponsive when I try to save a page as a bookmark, I have tried clicking the star in the URL bar, using ctrl-D, right clicking on the page, and saving from the bookmarks tab. None of these options do anything at all.
I have tried turning off different add ons but have not had any success. The only time I can get it to save a bookmark is if I bookmark my homepage, then it will save that, but nothing else.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I cannot open itunes on my mac. The Icon jumps, but nothing else happens.

I may have shut my computer off while a new version of Itunes was downloading. Not sure if this would affect it, but I can't open it now. When I click on the icon, it jumps a little, but nothing else happens! Any ideas?? Help! I can still open it on my iphone.

Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
Reboot.
Then Apple menu > Software Update.
Then reinstall iTunes.

Facetime works with USB UVC gearhead webcam but nothing else does

I have a gearhead USB 2.0 webcam that facetime easily see but nothing else does
It is a model WC4750AFB from gearhead it uses USB 2.0 Connectivity with UVC and Facetime sees it but I can not get any other applications to use it
Why can one app on my mac mini find and use it suxxesfully and others can't. This is really stupid. There is no basic instruction onhow to setup facetime or find out how it can see the webcam and it would be nice to know so I can get it working with my other app on my MAC mini

Logitech - HD Webcam C615
http://www.bestbuy.com/site/logitech-hd-webcam-c615/2588445.p?id=1218337862339&s kuId=2588445
Logitech - C920 Pro Webcam
http://www.bestbuy.com/site/logitech-c920-pro-webcam/4612476.p?id=1218501788204& skuId=4612476
I know FOR A FACT that those two WILL WORK with Mt. Lion and ALL Mac Apps that use a cam.
Skype too.
I really like the 920. It shoots in 1080p HD. EXCELLENT picture quality and video quality.

Single-user but nothing else

Similar Messages

Maybe you are looking for