Single user cannot RDP from outside the network. Everyone else can.

Bag for scale.

i took the IT Superhero quiz, and it made me a girl! so i tried retaking it until i got what i wanted, and finally, i just decided to reverse engineer their logic answers! it ended up being (somewhat) simple, and yet tricky to decipher, and so i decided to share my findings here at the Water Cooler to anyone in a similar predicament as me :Di highly recommend taking the quiz FIRST to see what you get (it IS rather fun), but once that is out of the way, feel free to have fun (i know i did). and don't forget to use your avatar if you like it!so basically, you just take the address of the Superhero quiz:
http://community.spiceworks.com/careers/sysadminday/superhero-quizand add the appropriate keys after it. for example:...

Similar Messages

  • Cannot remote into server from outside the network

    I have two laptops that all I want is to have them able to VPN to my server.  When the laptops are on my network, they are able to network in and see the server.   But when I go to Starbucks or McD's, I can connect to their network but I cannot VPN into my server.  I am getting a message that LT2?? - VPN, of course I cannot remember exactly what the message said but, it does not work.  I have changed the ports on the time capsule to 80, 1723 and something that is 4500.  As you can tell I am NO expert but would like to understand what I am doing wrong.
    I have CenturyLink and a time capsule that I have to pass through just to get to the server.  What else am I missing?

    Good advice from ebrind
    I'll add to it:
    - what IP address does your time capsule have?
         If your CenturyLink provides NAT and your Time Capsule is also setup for NAT, you will need to reconfigure either the TC or the CenturyLink to bridge mode and set the port forwarding in the device providing NAT.
    - do you see any activity in the VPN Log?
    - Your VPN server address which you set in your laptop should be the public address of your network, not the LAN address
    - If you do make a successful VPN connection, don't expect to see the server like you do when you are on the LAN. If the LAN address of your server is 10.1.10.2, you'll need to connect to:   afp://10.1.10.2  (after a successful VPN connection)
    - Lastly, do you need VPN? If you just need access to your files from the server, you can do this without VPN. Depending on your security requirements, you can simply map port 548 and access with:  afp://[public-ip]   or use webdav with SSL.

  • Design Studio access from outside the network

    Hi!
    I've got a problem with Design Studio 1.2 SP01. Everything works well, if I access everything when I sit in the office. If I'm at home and I chose "Add Datasource", I can select a Universe, but if I want to build a query "Edit Query Spezification", I get the following error:
    Failed to create CMS session (see error log for detail)
    Caused by: com.crystaldecisions.sdk.exception.SDKException$OCAFramework: Server demo.comp:6400 not found or server may be down (FWM 01003)
    cause:com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$NotFoundInDirectory: Server demo.comp:6400 not found or server may be down (FWM 01003)
    cause:java.net.UnknownHostException: demo
    detail:Server demo.comp:6400 not found or server may be down (FWM 01003) demo
    detail:Server demo.comp:6400 not found or server may be down (FWM 01003) demo
    Our server is named demo.comp and can be accesed if you are inside the company network. I can access the Server via comp-demo.com from the Internet, but if I use the Designer, I get the error described above.
    Thanks in advance!

    Could a Mod please move this to Design Studio space for answers? Tammy Powlas
    I already read through a bunch of threads, without finding an answer
    Thanks a lot!

  • Apart from strangling the cat, what else can I do to connect?

    I am on 24/7 with Virgin.
    From last Friday, my connection telephone number has been constantly engaged.
    BT tell me it is not a valid number (?).
    I can access the internet just by changing the number in remote access to the one I'm using now - a pay by the minute number.
    This leads me to believe thay my settings are correct - as they have been for a considerable time.
    Virgin have responded once with a standard reply confirming the telephone number (useless) to four e-mails. There is an unconnected (no pun intended) 'server' problem with their 'online help'.
    I am on Netscape or IE, external Zoom modem and I haven't done anything which might alter my settings.
    Any help would be much appreciated - even sympathy might make me feel better!
    Please bear in mind that I am a techno-idiot with any advice offered.
    Thanks in advance.

    Welcome to Apple Discussions. In fact, welcome to the Discussions for the new iMac Intel Core Duo!
    You may get a better/quicker response from folks with a Mac like yours and using you version of Mac OS.
    Here is a link to the correct forum for your post
    iMac (CRT)

  • Open Directory access from outside of network / internet

    Hello all,
    Got a question I'd love to get some help on, I have some users who are outside of my network and I'd like them to connect into the open directory on our leopard server so they can use the Shared iCal calendars, addresses, etc.
    So my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
    B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
    Hope that makes sense, I can't seem to find the answers I need in the manuals, if I knew how this was meant to work I could probably have a fair go at figuring out how to actually do it (firewall changes etc)
    Thanks in advance for the help
    Martin

    So my questions are A) Is it possible to connect in from outside the network and get access to the directory without having to have a seperate user account and use our VPN every time you want to connect? - if not is this the only way to do it (would you have to connect via the Mac VPN and then connect to the directory?)
    If your OD server is visible from the internet -- i.e., it has a public address -- then you can do this without the VPN. However, it's not advisable to have a server exposed in that fashion.
    You would be better off doing this through the VPN:
    - Remote user connects to internet at hotel, for example.
    - Remote user initiates VPN connection.
    - Remote user now has access to iCal server and directory information.
    Explain to the users that this information is private to the company, and private company resources are only available through the VPN. Allowing access without the VPN would be similar to the company posting its Employee roster and meeting calendars on the face of the building where any person (or competitor) could see them.
    B) is it possible to do this "seamlessly" so that you don't have to change any settings, login details each time you switch between your local user from outside the network and your directory access. (so basically if you are in iCal if you have internet access it will connect you to the directory, without you doing anything extra?)
    It's just one extra step: Connect to VPN. You're still the same local user on the computer.
    If you're talking about laptop users needing directory access to authenticate when logging into their computers, well...That sounds like a whole other situation.
    Hopefully this helps.
    Bryan Vines

  • Printer HP Envy 4500 Series cannot be contacted over the network

    My wireless printing chooses when it wants to work, and right now it's really acting up. It is connected wirelessly, it is the default printer, but after troubleshooting it is telling me "Printer HP Envy 4500 Series cannot be contacted over the network." What can I do to get printing again?

    Hello featherfamily,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer not connecting with a wireless connection.
    Please click on the following link that deals with when the 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time. 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

    Hi,
    I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.  I can access CRM with same user id and password from our office inside the network.  I can get
    the page to give login details once I have login details I got below error. Please help me to solve this issue.  It was working before.
    Access denied You do not have sufficient access rights or privileges to perform this action. 
    Regards,
    Noushad
    [email protected]

    On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
    Refer
    this on how to update host file.
    Regards, Saad

  • Pages (or Numbers) Template Cannot Be Opened From Outside the Application

    Ever since the upgrade to Mavericks, I cannot open a Pages (or Numbers) template without being asked.....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything.
    But this template is already in my Template Chooser.
    So the only way to open a template in Pages (or Numbers) is to open the application first, and then click "New", and choose the template.
    I can't figure out a way to open the template from outside the application, which is very very handy, rather than having to open the application every time that I want to access a template.
    How can I open a template simply by clicking on it?

    Yes, the problem is that opening the template from outside of the application will not open the application, showing the document.  I only get this....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything. 
    But this template is already in my Template Chooser.
    Put your Pages or Numbers document on your desktop and open it by double-clicking it, and you'll understand.  You can't do it, even if the template is in your template chooser.
    The only way to do this now is to open the application, select "New", and the select the template.  So you cannot open a template from outside the application....only from within.

  • Numbers (or Pages) Template Cannot Be Opened From Outside the Application

    Ever since the upgrade to Mavericks, I cannot open a Numbers (or Pages) template without being asked.....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything.
    But this template is already in my Template Chooser.
    So the only way to open a template in Numbers (or Pages) is to open the application first, and then click "New", and choose the template.
    I can't figure out a way to open the template from outside the application, which is very very handy, rather than having to open the application every time that I want to access a template.
    How can I open a template simply by clicking on it?

    Yes, the problem is that opening the template from outside of the application will not open the application, showing the document.  I only get this....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything. 
    But this template is already in my Template Chooser.
    Put your Pages or Numbers document on your desktop and open it by double-clicking it, and you'll understand.  You can't do it, even if the template is in your template chooser.
    The only way to do this now is to open the application, select "New", and the select the template.  So you cannot open a template from outside the application....only from within.

  • View/Change User Accounts From Across The Network - Do not have Server

    Is there a program or utility that can be run in Mac OS X Tiger or Leopard to manage user accounts on other Macs that are located across the network? Is there anything that will do this that is free, or not too much money?
    Our setup: multiple Macs on a network that is primarily a Windows AD Domain. For various reasons, we do not have the Macs setup as members of AD. We also do not have a Mac OS X Server. I am wondering if there is something that is built-in, free, or on the cheaper-end, to manage user accounts and their permissions from across the network on the Macs?
    Thank you for your help!
    Dan

    If the systems are not bound to a parent domain, then local account policy will need to be set individually. There is a way to get Workgroup Manager working on OS X client, but I do not know of a way for it to see remote NetInfo/DS Local data stores. It will only see the local store. NetInfo in the 10.2 days could pull this off. But Apple removed those features in favor of LDAP and eventually DS Local.
    You will probably need to use a combination of tools. Start with defining base settings in the User Template to ensure that all new home folders are created equal. Then use ARD or ssh to define user policy with pwpolicy and other tools like niutil (Tiger) or dscl. Test with mcxquery. If you get Server Admin Tools, you can use Workgroup Manager to craft the needed xml for mcx values, then inject into the user account.
    But this is only going to get you local policy. If users are connecting to file shares and mail, they are using their network credentials so those policies need to be managed at the domain level.
    I would encourage binding the machines to the domain. While this can, and has (sadly), been done, being part of the domain is so much easier. If you need a system for storing the LDAP schema, get a Mini and do it on the cheap. Otherwise, consider AD schema modification and then practice your xml skills.
    Hope this helps

  • Do I need a domain name in order to connect to my Mini Server 10.8.2 from outside my network?

    I am working on setting up my mac mini server. Aside from in home file sharing I want ot be able to connect to some files remotely and even upload files, say pictures from my camera, to my server from outside my network. I am only looking to have maybe 2 users that have access. Should I get a domain name from a place like GoDaddy? in order to set up server to use domain in initial setup? I have 2 Drobos connected with my music, videos and pictures and I wat to access them from an Android, Windows and iPod device when away from home. Any how-tos out there or good step by step guides?
    Thanks for any information.
    -Peace
    -Dave

    A normal address like www.domain.com is intended to work with static IP addresses, DynDNS is a service specifically intended for dynamic addresses and it will therefore automatically update the address e.g. name.dyndns.org to match the dynamic IP address each time it changes.
    Some home broadband routers have built-in support to act as a DynDNS client but if yours does not then you can run the DynDNS software on your Mac server. This will then tell the DynDNS servers what your current dynamic IP address is so they can map it to your host name.
    The result will be that your users can use a name like yourname.dyndns.org to access your server and not have to worry about the fact your IP address may change.
    You would still need to run a VPN server to allow your remote users to connect to your network but OS X Server can do this. You could also run a website but depending on your needs that might be better done by using a web hosting service.

  • TS1646 hello  I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

    hello 
    I have problem with regist my visa and I cannot buy from store
    the message came in the end of form is says
    the phone number must be a 7-digit number
    and I have writed but not accepted
    iam from saudi arabia
    my mobile is 966504850992
    pls answer
    thanks
    dfr aldossary

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • Access SAP through SAPRouter from outside of Network

    Hello All,
    As my SAPRouter cerificate got expired  i genrated new certificate & import same into SAProuter. And this time my router is working fine.
    But this time i want to access from outside of network so added this entries in my SAProutab as follow:
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <Public ip>
    P <Public ip> 194.39.131.34 3299
    P <my router ip> 194.39.131.34 3299
    P 172.16.. 194.39.131.34 3299
    P 194.39.131.34 172.16..
    P 194.39.131.34 <Public ip> 3299
    S * <my SAP ip> 3200
    P <Public ip> <my SAP ip> 3200
    Note:
    SAP System No: 00
    DEV_Rout
    trc file: "dev_rout", trc level: 1, release: "700"
    Thu Sep 30 11:38:25 2010
    SAP Network Interface Router, Version 38.10
    command line arg 0: F:\usr\sap\saprouter\saprouter.exe
    command line arg 1: -r
    command line arg 2: -W
    command line arg 3: 60000
    command line arg 4: -R
    command line arg 5: F:\usr\sap\saprouter\saprouttab
    command line arg 6: -K
    command line arg 7: p:CN=<HOSTNAME>,OU=0000*****,OU=SAProuter,O=SAP,C=DE
    SncInit(): Initializing Secure Network Communication (SNC)
    PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
    SncInit(): Trying environment variable SNC_LIB as a
    gssapi library name: "F:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll".
    File "F:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
    The internal Adapter for the loaded GSS-API mechanism identifies as:
    Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
    main: pid = 2028, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
    reading routtab: 'F:\usr\sap\saprouter\saprouttab'
    I am not able to access my sap from outside of network.
    SAP Router String: /H/<PUBLIC IP>/S/3299/H
    Any idea. Thnaks in advance
    Regards.

    Hi,
    Hope you have private external IP than dynamic which changes every now and then you can this:
    P <Public ip> * 3299 or P <Public ip> SID_IP 3299
    Also look for your the logs for saprouter and your router logs if this not works.
    Regards;

  • SMB not working from outside local network

    Hello,
    On my old MacBook I installed OS X Server to create a file sharing server.  I set it up using my public IP address so that I could access my files from outside the local network.  I don't have an Apple router, but I found the port number for SMB and AFP and did the port forwarding.  My issue is that smb stopped working.  It used to work out side the network because it tested it.  My Mac can still connect though outside the local network using my public IP.  I have no clue why SMB is not working as it was working recently.  My only idea is that I got a new modem from my ISP.  Could that make a difference?  I don't get it because AFP still works fine.  File sharing using SMB is checked in the server app and file sharing preferences so it is not that.  I am using OS X 10.8.4 on a MacBook running OS X Server version 2.2.1.  Any help would be appreciated. 
    Thanks,
    Michael

    Is it a modem only, or is it a modem/router that might be creating a double-NAT on your network?
    Incidentally, since you're running Server, you might want to use the built-in VPN gateway to give yourself better security - tunneling AFP/SMB through a router/firewall is pretty insecure.
    Matt

  • How can I buy subtitled movies from outside the US?

    how can I buy subtitled movies from outside the US?

    People here are users, you need to contact Apple Inc. by phone and see if you can resolve this problem.
    http://support.apple.com/kb/he57

Maybe you are looking for