Single user mode locks up hard

Is anyone else having this type of problem? I had it with both Panther and now also with Tiger. I've filed a bug on this with apple, but they closed it citing the usual "you have third party ram" argument. The ram has zero issues with anything else and I've done some very extensive testing of it (running remember for 72+ hours without a single fault).
Basically what happens is within 2 seconds of getting the root shell prompt in single user mode it locks up. By lock up I mean that the keyboard is locked out and no method of input works. Funny enough if there was a key pressed down when this happens the key keeps repeating, even if I unplug the keyboard.
This machine seems to be kind of haunted (have other problems with it as well, all registered with Apple) but I can't get them to replace it.
Just looking to see if I'm the only one with this problem or not ....
TIA

Are you using a Bluetooth keyboard? Some people have reported being unable to type in Single User mode with a Bluetooth keyboard, even though everything else works normally.
(8916)

Similar Messages

Freeze in Single User mode

Hi, my iMac G5 is freezing right away when I boot in single user mode. I mean right away at the prompt. I cannot even start typing anything. The fan start at 100% and I have to hard shutdown the machine. This happens ALL the time I boot in single user mode. EVERY TIME no exceptions.
I am trying to run a memory test (using MEMTEST) to see if my 1gig memory is defective. My iMac freeze randomly without me able to find a consistent pattern.
Questions:
1- Does the freeze at boot could be a problem with me using a bluetooth keyboard and mouse?
2 - If not, the fact of freezing at boot in Single User mode a possible explanation of memory problem (does the single user mode lock-up memory that could be bad?) as my iMac do not freeze (for a while) when booted in multi-user mode.
My setup: 2 ghtz iMac G5, 1x1gig Kingston PC3200 memory (sold and installed by my Apple reseller). My G5 is 7 month old still under warranty.
I am new to the Mac - I switched from PCs.
Thanks for the help.
iMac G5 + Thinkpad T40 Mac OS X (10.4.2)

With the PC-Viewsonic keyboard, Pierre, the symptoms you describe are exactly what you would expect.
Third party, non Apple, keyboards, even wired ones, can't usually be used to do anything beyond simply starting up in SU mode (you can start them up and get to the prompt, but when you are there you can't do anything further).
The same applies to Apple Wireless keyboards when running versions of the OS 10.4.2 or earlier, or if the bluetooth firmware isn't up to date. Again, you CAN start them up in SU mode, but you can't do anything with them after you reach the prompt.
As far as the BT issue goes, as you say its running 10.4.6 I'm beginning to wonder if there was a problem with one of your OS updates. I'd be inclined to download a fresh copy of the full 10.4.6 Combo updater, and run it again. Probably worth running the Blue Tooth firmware update again, too, just in case.
Rod

IMac G5 won't boot in normal and safe mode, but will from single-user mode

Hello everyone,
I'm quite new here, so I try to do my best if you have a question.
Yesterday, someone nearby me had a iMac G5 (Powermac8,1), and he sayd, that the computer sometimes will boot, sometimes not.
I did test it, I thought it was running fine, but when I played some music in iTunes, it was stuck on 9 seconds, and crashed (with a kernel panic). The guy also sayd, that there was nothing important on the computer, so a clean install was fine.
Now, the problem is, that it will not boot in normal mode (without anything pressed on boot), also it won't in safe mode (shift-boot), but it will, when I enter single-user mode, mount the hard drive and exit from single-user mode so it will go futher on booting. Sometimes it will not, and immediately gives you a kernel panic in single-user mode, but it will 90 percent of the time.
Then you've got another problem: when it's running in the normal desktop from single-user mode, it'll be stuck after some time again. If I look into the Kernel Panic file created, most times it's because of Spotlight indexing, so I disabled that.
He also gave me the disks (Apple Hardware Test and Extra Applications, and iMac G5 Mac OS X Install Disks 1-3) that came with the Mac. He sayd that I could use them, but I think he didn't test out the SuperDrive, because when I insert a disk, it will try to read, but it will make 2 same sounds, and quits after 10 tries, when it will spit the cd out. Also normal (audio) disks.
Also, I must hurry with the commands for mounting and exiting in single-user mode, or it will just not boot.
In all cases, after 30-45 seconds from pressing the power button, the fan will start blowing at full speed, and it will stop after the exit command in Single-user mode. That's weird.
I can't do anything with the SuperDrive, I can't normally boot in Mac OS X except for Single-user mode (but I don't think he would like to do that every time the computer boots up), and I have very limited time when Mac OS X arrived on the desktop.
When booting in Verbose mode, it will be stuck on this:
AppleSMU::PMU vers = 0x000d004c, SPU vers = 0x15, SDB vers = 0x01,
(and sometimes ends with a kernel crash by fsck_hfs)
Things I've tried (without any success):
- /sbin/fsck -fy (in single-user mode)
- Disabling Spotlight and mds
If you want some more information, feel free to ask!
Greetings
-MrYoranimo
PS: My main language is Dutch, so my English can be bad at some points.

Thank you for your support! This reply is a little bit late, because I was to the camping this weekend.
The only thing I sure do know, is that the iMac has a bad SuperDrive. That's one problem, but I don't really wanna use it, and you fix everything by Single-user mode and when I get to the desktop to test things and change stuff in the Preference Panes.
What also came to my mind was that there also is a problem with the videocard (driver), because sometimes when I boot into Single-user mode, I can see some white pixels which aren't supposed to be there. And when booting from SUM you can see that some of the colors are different and there are weird patterns on the screen.
I also tried to setup a NetBoot server on this computer (MacBook Mid 2010) with just Lion 10.7.4 on it, but I'm not that expert and I didn't really find the good posts on the Internet, although I tried it with the Server applications and both Server applications and DeployStudio. But I didn't succeed.
I don't really like buying a new FireWire hard disk or external FireWire dvd reader/writer, except if it has USB support, because my MacBook doesn't support FireWire, and I really wanna make use of it then.
If I know more or have fixed it, I will surely post again here with what I did to fix it (if no one else has posted here already ).

How do i repair my hard drive in single user mode when disk is full?

Hi there Apple Community!
I have an old Macbook Pro 17" with an upgraded 500GB harddrive and 4GB memory. I'm running Mac OSX Lion.
Was hoping you could help me out. THis is the situation:
Long story short I spilt wine on my macbook and the screen went a bit blobby. Switched it off for a few days, removed the battery etc. etc. Opened it up cleaned out as much of the wine as possible, but unfortunately some of it came in behind the LCD, so now the screen has a nice red stain. Obviously I'm not going to try to clean that out of the LCD.
My Macbook Pro still worked for a few days after that, but then my harddrive gave up. I booted in the Recovery HD menu, verified the drive and I got the error "Keys out of order - This disk needs to be repaired, click Repair Disk." I attempted to repair the disk but got the error "Keys out of order - Disk Full Error - The volume could not be repaired".
Unfortnately of this 500GB I only have about 7GB free on it, as I have a huge iPhoto and iTunes library. I did make a TIme Machine backup of my user directory, but not the system files. I don't really want to do a clean install because:
1) I'm paranoid that there's something I did not fully back up
2) I don't want to have to download the whole Mac OSX Lion again. I should have made a USB bootable backup when I had the chance. I don't have access to a broadband connection.
What I feel are my viable options, are as follows:
1) I did buy a replacement internal 500GB harddrive, so I can probably try to make an image of the hard drive to this new drive, but not sure how. I believe it's through the Disk Utility with the "New Image" option but not sure how to go from there.
2) Start up in Single User Mode and delete some unnecessary files and re-attempt to run the fschk -fy utility again (I tried this earlier and got the same Disk Full Error). - the problem with this is, I'm not familiar with the command line and have no clue how to delete files. I don't know my way around Unix.
3) I can also probably attempt to make a Ghost Image or Acronis Image of the failed drive to this new drive, but not sure if Norton Ghost or Acronis True Image will be able to read this HFS drive - I believe it's possible as it's a simple hard drive clone.
If you can guide me in the best option - probably there is a better solution than my proposed ones above, I appreciate any feedback and comments you might have!

hi Baltwo,
So I ended up copying my user folder to another harddrive. I managed to download the whole osx lion again, reinstalled, and recovered my home folder using this discussion:
http://support.apple.com/kb/HT1428
I have managed to get all my files back. My iTunes library works fine, but my iPhoto library when I open it, get the following error:
iPhoto cannot be opened because of a problem.
Here's the error log
Process:         iPhoto [1540]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         8.1.2 (8.1.2)
Build Info:      iPhotoProject-4240000~8
Code Type:       X86 (Native)
Parent Process: launchd [209]
Date/Time:       2012-09-19 19:56:45.528 +0200
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Sleep/Wake UUID: 7948ABE2-5294-4F87-B6E3-777095A2F2EE
Interval Since Last Report:          4780 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   9
Anonymous UUID:                      70117D38-03EA-4F9C-B810-50B743864B9E
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
I've done an Apple Software Update but it didn't find an update for iPhoto.
One thing to note is, this library was originally created on iLife 08, upgraded to '09 and it stayed on that version. It hasn't een upgraded to iLife '11. It worked fine on my previous install of OSX Lion. How do I recover the library without upgrading to '11 ?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

Mounting a usb hard drive in single user mode

I've gotten as far as connecting the hard drive at boot, but I don't know how to figure out which dev is the hard drive, and which arguments to use with the mount command. I can't do much when I login, and I'm trying to cp files from my hard drive to my external hard drive through single user mode.
Any help is greatly appreciated. Thanks.

Hi leung wai,
   I wouldn't mind knowing the answer myself. I think the problem with doing it in the manner you attempted is that the device tree hasn't been created yet so the mount command is certainly not going to work. I assume that the answer is to start up enough of the system to have the device tree created. Unfortunately, I don't know where in the startup process that occurs. You could try the following command after making the boot volume writable:
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
Then check to see if the /dev virtual filesystem has been created. Of course it wouldn't surprise me if that didn't also mount your disks. If not, try the following:
/sbin/SystemStarter
It should have been created after that because at that point almost the whole system has started.
Gary
~~~~
   You've been telling me to relax all the way here, and
   now you're telling me just to be myself?
         -- The Return of the Secaucus Seven

Mount an external hard drive in single user mode

Do any know how to mount an external hard drive in single user mode:
I've issue the following command:
/sbin/mount -uw /
mkdir /Volumes/ex1
/sbin/mount_hfs /dev/disk2s3 /Volumes/ex1
(I've checked my external hard drive using df -k showing the device is disk2s3)
Result:
Permission denied

Hi leung wai,
   I wouldn't mind knowing the answer myself. I think the problem with doing it in the manner you attempted is that the device tree hasn't been created yet so the mount command is certainly not going to work. I assume that the answer is to start up enough of the system to have the device tree created. Unfortunately, I don't know where in the startup process that occurs. You could try the following command after making the boot volume writable:
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
Then check to see if the /dev virtual filesystem has been created. Of course it wouldn't surprise me if that didn't also mount your disks. If not, try the following:
/sbin/SystemStarter
It should have been created after that because at that point almost the whole system has started.
Gary
~~~~
   You've been telling me to relax all the way here, and
   now you're telling me just to be myself?
         -- The Return of the Secaucus Seven

Mount external Hard drive in Single user mode

Do any know how to mount an external hard drive in single user mode:
I've issue the following command:
/sbin/mount -uw /
mkdir /Volumes/ex1
/sbin/mount_hfs /dev/disk2s3 /Volumes/ex1
(I've checked my external hard drive using df -k showing the device is disk2s3)
Result:
Permission denied

I seem to remember the "Permission denied" or "Device busy" coming up in some situations but not others when attempting to mount drives at this early stage in "single user" mode...
It might be worth trying to run:<pre>sh /etc/rc</pre>This is actually present among the "Tiger" messages in "Single User" mode, as the procedure to continue booting but remaining in "single user" mode. Indeed, it seems to start up the usual "services" like starting disk arbitration (so you can eg. use 'diskutil' to repair permissions, or loading "NetInfo" so you don't need to work in '-raw' mode - in the past, people had posted complicated procedures for doing these things manually.
After running the 'rc' script, try creating your mount point and and running 'mount_hfs' as usual...

How format the hard disk in single-user mode

Hi all, i would like to format the internal hard disk of my macbook pro 13'' through single-user mode. How can I do it, please?

Ok, to do that you need to hold c and boot off the 10.6 installer disk and second screen in under the Utilities Menu is Disk Utility.
You can then select the hard drive makers name (your "bare metal") and peform the wipe/format of the entire drive or a "partition" on that drive.
In the picture below there is only one partition, the Mac HD. In the picture above there are two partitions which both would show up under the hard drive makers name and both or either partition can be wiped in Disk Utility.
Use the Security Option to Zero your hard drive of all lingering data.
When you Quit Disk utiltiy, your back in the installer and can quit or install OS X.
Note: messing with Disk utility will erase all data on the drive, if there is something you need to recover better stop and ask!
If you don't see your internal boot drive in Disk Utility, the drive is dead.

Lock single user mode? sum

Is it possible to lock single user mode? Like when unauthorized persons get their hands on your mac and boots into sum, it will ask for a root password or something before they can do anything? Thanks a lot!
os x 10.9.4 - macbook airs and pros

Thanks you, quick question, is there a difference between a "root password" and a "firmware password"?
Kappy
Frank Caggiano

Wipe a HD via Unix in Single User Mode?

Is it possible to wipe a hard drive using diskutil or another method when booting up in Single User Mode? We routinely need to wipe drives and if possible, this would be the easiest.
I suspect because the OS that boots in Single User Mode is on that same drive will make this impossible.
Thanks in advance for your tips and comments,
Doug

Yes, you cannot erase an OS while it's 'hosting' the erasure. Single user mode is part of Mac OS X, so it's on the hard drive, not in the firmware or anything super-low-level like that. Oh well. So... you might be able to erase the vast majority of user, application, and even OS files, but it won't be complete and won't be 'as good as' a volume-format.
A couple alternatives come to mind (sorry if you know all this. Not trying to be pedantic or patronizing, just making sure you know your options).
We keep host computers around just for running wipes, backups, and diagnostics that cannot run from a drive holding the booted OS. You simply restart the to-be-wiped Mac holding the 't' key, connect it via firewire, and treat it as an external hard drive.
You could also just boot from a Mac OS X install disc and wipe from the copy of Disk Utility included on the disc. Better yet, throw a +bona fide+ copy of OS X onto a pocket hard drive, boot the victim-Mac from that (hold option while it is first starting up), and wipe the internal HD normally, now that it's not in use. You could maybe even use single user mode in the booting OS, like you'd imagined, and format from there (I'm not sure that would be faster than letting it boot normally, though, as you might have to use "dd" or some other similar low-level wipe method, as I don't think the frameworks required for Apple's cli "diskutil" are available in single user mode).
I haven't tried to use it on a Mac, but I have a 256 MB USB flash drive with, er, ['Darn' Small Linux|http://tinyurl.com/5md7t] on it for diagnosing Windows boxes. It runs a script on boot which, if you don't intervene to run utilities or what-have-you, will wipe all attached hard drives and shut down. I keep it locked up for understandable reasons, but its super useful just as a time-saver, booting most machines and beginning the countdown-to-wipe in under ten seconds.
Anyway, let us know what your goals and thoughts are.
Cheers, Joel

Won't boot normally or in recovery and single user mode, safe mode hangs up halfway

iMac locked up with visual glitches while playing the Mac beta client of League of Legends. Had to force a shutdown by holding the power button. Now it won't boot; after the Apple logo and spinning wheel I just get a white screen. I tried launching in recovery mode, that didn't work. Then I tried safe mode; the bar filled a little over half and then nothing but white screen. I was able to boot single user mode once; ran fsck -fy and rebooted, still white screen. Now I can't get back to single user mode. I booted with command option P R to reset the NVRAM and got the second chime, but still nothing.
Luckily all my important files are in the cloud, but I'm really hoping my computer isn't completely dead. I haven't had any issues in the past. I've even been playing LoL for over a month with no issues, until now when I tried to play the newer game types, Dominion and ARAM; both caused visual glitches forcing shutdowns. I was able to restart my computer with no problem after the first two visual glitches, but after the last one I am stuck at the white screen as I described above.
Thanks in advance for your help!

I'd bet the drive is damaged. You could try reformatting if possible. Again, you are booting from the Recovery-10.8.2 disk if you can. If you can't, then you will need to use the installer disc that came with the computer.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Can't enter Single-User Mode

I just bought tiger for my 12 inch powerbook G4. am unable to complete installation due to an error with my 10.2. The problem is I dont have the start up disks anymore and can't enter single-use or verbose-mode to fix the problem.
Any ideas on how to upgrade or enter single-use?
Thanks
Ben

An Open Firmware password is one thing that would prevent you from changing the startup disk, booting from a CD or starting up in single user mode. You would see a lock and a dialog asking you to enter your password. So, it doesn't seem that this is your problem.
If you have some file directory damage, you can use the Tiger install DVD to attempt to repair it. Put the DVD in the drive, restart and hold down on the "c" key (if you have one and then choose the language you want to use. At the next screen, do not continue to install but choose to open the Disk Utility from the Utilities menu. You can then use the Disk Utility to "repair disk" on your hard drive. The Tiger Disk Utility is pretty mature and can repair many problems.
-Doug

I'm having kernal panics even in single user mode

My new Mac Pro has been having kernal panics left and right. I've done everything suggested here plus everything the Apple people have been telling me to do both on the phone and at the local Apple store. Nothing helps and the last call I made the Apple tech suggested I install a new hard drive which he is sending me. I also have his extension number so I can call him when the install is done. In the meantime while I'm waiting for the new hard drive I manage to reinstall the system after a couple of tries and just for grins boot into single user mode and let the computer sit for awhile. When I get back I find the computer has once again crashed and this one line stands out "simple lock deadlock detection". What this means I have no clue but I'm beginning to suspect what I have is a real lemon. If anyone has some insight they'ld like to share on this I'm open to suggestions.
P.S. And just to let you know I've done the following:
1. I've booted into safe boot mode and it crashes
2. I've booted off the install DVD and let it stand and it crashes
3. I've disconected everything but the mouse and keyboard and it crashes
4. I've reinstalled the system numerous times and it still crashes
5. I've taken it to the local Apple store where they replaced the memory and it still crashes
6. I've called the Apple help line and followed their suggestions which included unplugging the computer for 15 seconds to clear the SMU and it crashes even worse.
7. I've zapped the pram and reset the nvram and it still crashes
8. Even when I left it at the local Apple Store where they used their monitor, mouse, keyboard, and power cord it still crashes
9. It crashes on startup from time to time
10. And last but not least it crashes in single user mode even though I've done fsck -fy and then let it just sit
11. Oh yes and one more thing, the crashes are completely random and unpredictable.
Mac Pro duel core intel xeon 2.66mhz Mac OS X (10.4.9)

Well I finally resolved my issue, hopefully. Upon installing the new hard drive I had no problems for a week or so and decided to add a second drive and put my old system on it and see what would happen when I booted from the second drive. All went well for a week and then boom the crashes began again. I then switched back to the new drive with the fresh system and all went well for a little over a week when boom the panics returned. I called Apple and they made an appointment for me at the local Apple store. After looking at my files which included about 7 phone calls and several visits to the Apple store the best solution was a brand new Mac Pro. All this has been covered under warranty which is awesome. The only crashing I've had to date had to do with something called "mdimportserver" whatever that is. I also can only use one ethernet connector which is strange. I figured it might have to do with the new hard drive so I booted over to the old drive and everything is working fine except for the ethernet port which I haven't tried yet. I figure for now it's best to let that sleeping dog alone since everything else is working so good. When I'm sure this new Mac is working ok I'll wipe the new drive and use Super Duper to clone this system over rather than use Apple's migration assistant which evidently didn't do such a good job of migrating my system over. I'll let you all know how it goes several weeks from now hopefully.

Copying a file in Single User Mode

Hi all,
I was in the hospital, trying to backup files from my 15 inch Macbook Pro (new in November, running the latest OS), when I knocked over a cup of coffee, burning me. I knocked the computer onto the floor as I jumped up and now it is locked and read only, no matter what I do (original attempts to fix can be found here: https://discussions.apple.com/message/21633118#21633118). I can boot into single user mode, or holding down 'option' when I push the power button, but not boot normally to save my life.
I need to copy the entire user file ("Liz") from the damaged HD in single user mode to an external drive ("passport"). Is this possible? I tried using disk utility to copy the files, but it gives me an IO error. Being a novice, I am unsure if this is possible. It's the last chance I think I have to save the files I was *trying* to backup when I spilled the coffee. Some of it is critically important, so if you have any ideas, PLEASE let me know.
Thank you in advance.
Liz

There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Single user mode locks up hard

Similar Messages

Maybe you are looking for