Single User Story Multiple Teams

We are having an issue in the web version of TFS where I have one user story that is being worked on by multiple teams. The story is not large enough to break down to split into teams, but different people need to do something to complete it. However,
in the web version, we cannot see the tasks unless it is a child of the user story that is assigned to our area path. How do we solve for this without having the overhead of having to create duplicate stories?

Hi PaulVirginiaBeach,
I'd like to know the version of TFS you're using, and whether the user story has an area which has multiple sub-areas. Based on your description, seems the scenario is as expected when you view the linked tasks of the user story when your accunt in a specific
team.
You can open the user story in team web access, and click the button of "create a copy of this work item". For the new created user stories, you can change its area values and linked tasks as your need.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Similar Messages

IWork Licensing -Is Retail License for a single user or multiple users

I have a a Retail Version of iWork '08. How do I determine if this is for a single user or multiple users?
Thank you

So the next question is can I "unregister" this from my iMac thus allowing me to either reistall it on another machine or perhaps sell it?
Yes, you can. Apple doesn't "track" serial numbers, but you are doing the right thing by removing iWork '08 & it's registration. The file that keeps the serial number is the com.apple.iWork08.plist found in HD > Library > Preferences. This is the Library on the first level of your HD, not your user Library.

Can you move websites published on from a Single User account to Team account?

Hi All,
Need some help we had a single user account with which all our websites were hosted for clients, then we upgraded the whole studio to the Team Package, but need to know if we can cancel the single user licence and move the current live sites in that account to our team account? Any help would be greatly appreciated.
Thanks, Matt.

Hi,
There is a ~/Library/Mail/ and this has a subfolder of /AccountTypes, so full path is ~/Library/Mail/AcountTypes
I have 6 active email accounts over 20000 mesages and send and receive constantly. Until upgrading to Lion I was able to see the directory contents you mentioned and used to backup the .mbox files etc as required and everything was good.
Now Nothing, hence my confusion
Any ideas? Am loathed to delete complete drive as even though I have a timemachine backup and could also generate a diskimage file am just not happy

How can point single user to multiple groups in ACS

Hi,
we are having almost 150 NDG groups in my ACS Server, in that one group is specifically for Security devices like pix & ASA's.
Now My requirement is that i want to Restrict this Security NDG group to one Specific Group under Group setup menu in ACS.
is it possible in ACS Server.
If it possible how can i point multiple multiple groups to single user.
Because not all users required access to this Security NDG group. only few users require the access.

Give a read to how NAR works, then apply it to the security group on ACS.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a00801a8fd0.shtml
Regards,
Prem
Please rate if it helps!

How to achieve restriction for a single user having multiple authorization

Hi,
I have a requirement that an user has 4 authorizations attached to him.
Auth1:
0REGION: US, INDIA,JAPAN
0PRODUCT: SHAMPOO
Auth2:
0REGION: US
0PRODUCT:SOAP
Auth3:
0REGION: *
0PRODUCT: DETERGENT
Auth4:
0REGION: ASIA
0PRODUCT: *
Now, this user when execute a report, then the report should pop up which authorization to choose and display the data accordingly on the specific input. For example.... if the user enters auth1, then PRODUCT SHAMPOO for REGION US,INDIA and JAPAN will be displayed.
Please help how to achieve this.

Hi
You can try out following things
Create a Info object for Authorization and include it in infocube on which query is based. Keep authorization blank in the info cube.
Maintain relation ship between Authorization Product and Region in DSO or Database table.
Create characteristics variable for authorization infoobject, Product and Region. Selection screen variable for Autorization will be ready for user entry. Selection screen variable for Product and Region will be customer exits variable.
In I_step = 2, populate variable values for Product and customer based on the user entry for authorizaton variable and clear values of authorization variable
Kindly let me know incase further details required
Best Regards
Rohit

"Can Portal Authenticate a single user into multiple Domains"

Hi All,
I have a requirement in the following way.is it Possible to achieve?
lets take user with user-id(SSO environment) ABC ,maintained in MS AD under domain name say "SAP.com"
We are going to migrate this domain into another domain say "SAP123.com" and so others,and we want to maintain the same user with same userID in new domain(SAP123.com) also.
In simple words user must be able to authenticate on both domains and he should be able to access all the applications in new domain also via role mechanism
This we are going to do only for test purpose,later we will be maintaining only 1 domain for 1 user.
My only question : is it possible to accomplish the above requirement by any means?and How?Does it make sense?
waiting for your valuable inputs.
Thanks in Advance
Amit Koyal

Hi Amit,
yes, I'm around, but unfortunately pretty busy at the moment (preparing the TechEd session for Amsterdam next week).
Here my answers:
1. As you can read from SAP Note 762419, "it is possible to use integrated Windows authentication in a multi-domain environment even if users' logon IDs (represented by the attribute "samaccountname") are not unique across all domains". Please make sure that you go through the limitations of the two options.
2. If you change the portal domain, SSO will work only with servers located in the same (new) domain as the portal. You don't need to make here any change if your (SAP) applications are also in the new domain. If not, please consult the documentation I gave you in my previous post.
Hope this helps,
Robert

How to post to database as single user on multiple pages

Hi,
I am trying to develop a quiz where I use the ADDT insert record form wizard. Since the test will have over 50 questions, I would like to have two questions listed per page, and then have it all be submitted at one time. Anyone have any ideas of how to do this? I am using the insert record form wizard so that I can upload this information to a database to keep on file.
Any help would be appreciated.

jedimark,
Here's a way to do it using session variables:
Brief Session Tutorial
However, you could also do it using an initial Insert Record page, and then every page after that would be an Update Record page. You would just need to pass the primary key for that Record to each subsequent Update Record page.
Shane

Multiple Logins of single user

How do we prevent a single user from multiple logins on IDM.
If the user has already logged-in, IDM should prevent the same user when tries to login again.
Thanks.

This is really difficult to implement. The app server takes care of most of this session behaviour and we can have mulitple IDM instances in a setup which makes this really difficult.
The other thing is how would you detect a second login? Does the second login come from the same IP or different IP? There are possible problems with all these scenarios.
It is an oustanding enhancement to give you this option but it will not come soon.
WilfredS

Set Single user with reviewer access to multiple conference room calendars

Want to add a single user with reviewer access to multiple conference room calendars, used the below but it given a below error , Single user i am able to add but single user for multiple confernce room calendars hot happening.
Import-csv C:\smtp1.csv | foreach-object {Add-MailboxFolderPermission -identity $_mail":\Calendar" -User "Mike" -AccessRights "Reviewer"}
Smtp1.csv
mail
[email protected]
[email protected]
Error:--
[PS] C:\>Import-csv "C:\smtp1.csv" | foreach-object {Add-MailboxFolderPermission -identity "$_mail:\Calendar" -User "Mike" -AccessRights "Reviewer"}
The specified mailbox "\Calendar" doesn't exist.
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission
The specified mailbox "\Calendar" doesn't exist.
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 78C23328,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission

i tried with that as well but getting the below
A positional parameter cannot be found that accepts argument ':\Calendar'.
    + CategoryInfo          : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
A positional parameter cannot be found that accepts argument ':\Calendar'.
    + CategoryInfo          : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
A positional parameter cannot be found that accepts argument ':\Calendar'.
    + CategoryInfo          : InvalidArgument: (:) [Add-MailboxFolderPermission], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Add-MailboxFolderPermission
Cannot process argument transformation on parameter 'Identity'. Cannot convert value "" to type "Microsoft.Exchange.Configuration.Tasks.MailboxFolderIdParameter". Error: "Valu
e cannot be null.
Parameter name: mailboxFolderId"
    + CategoryInfo          : InvalidData: (:) [Add-MailboxFolderPermission], ParameterBindin...mationException
    + FullyQualifiedErrorId : ParameterArgumentTransformationError,Add-MailboxFolderPermission

Sharing iTunes on a single computer with multiple users

Greetings,
I have been troubleshooting a problem sharing iTunes on a single computer with multiple users that cropped up a few weeks ago and have not had very good luck.
Several months ago I successfully set up my wife’s G4 Laptop (PowerPC processor) so that we could share iTunes on that computer. I had just gotten her an “My Book” external hard drive (Western Digital). The iTunes Library will go on this new unit because the internal drive was running out of room. I successfully set the privileges, moved the entire library onto a “Share” directory and everything worked fine.
In this way, when I got a new CD I could add it to iTunes (under my login, administrator privileges) and she could access it (under her login) to listen to while working on the computer or using her iPod. This arrangement went well for quite awhile.
About a month and a half ago, when I tried to launch iTunes from my login I received this message:
“The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file.”
I think the permissions must have changed when there was an update because my wife is pretty careful about what she does on her computer. Updates were the only thing I could think of that had changed since I had set her computer up. I also noticed that some of the iTunes defaults were different from the last time I had used it to add a CD.
So, I did some reading and went back through the motions of trying to set it up again. I re-formatted the My Book hard drive to Mac OS Extended (Journaled) added the files back to the external, reset permissions on the external hard drive. (Owners: System, Access: read and write - Group: wheel, Access: read and write – Others: read and write).
When I now launch iTunes under my login I get this message:
“The operation cannot be completed because you do not have sufficient privileges for some of the items.”
What gives? I am the original owner and have always had top-level privileges.
Can someone point me to any articles or clues as to how I need to set-up iTunes on a single computer to be shared by more than one user? Also, I am considering upgrading to the newer system in a few weeks, so if a solution for OS X 10.5 is available, that would work too.
Tim

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

How to provision multiple AD Accounts to a single User Profile in OIM

Hi,
We are using OIM 11g R2. We have implemented AD Provisioning/Reconciliation using Active Directory 11g Connector.
The correlation rule for linking AD accounts with OIM during target recon is set as “Email ID”
We have some business requirement where we want to provision multiple AD Accounts to a single User Profile in OIM.
Issue we are facing:
Suppose we have USERID1 in OIM which has email id as USERID1@ XYZ.COM .
After that we have provisioned sAMAccountName=USERID1 (Email ID as USERID1@ XYZ.COM )& sAMAccountName=USERID2 (Email ID as [email protected]) to the user User Login = USERID1 in OIM.
Both the AD User accounts can be seen as provisioned.
After we run the AD Target Recon, the target recon is failing because of “Multiple Process Matches Found” issue.
Question here is:
Is it possible to maintain/manage multiple AD Accounts (Same AD is used for all the multiple AD Accounts) to a single OIM profile user ?
Regards,
J

Hi,
We have seen its working and linking multiple accounts when we have Key field as "User ID" in the Process Defn & RO and the recon matching rule has email ID as the matching rule.
Please suggest, if we are having the above kind of rule/config...will it not cause any issue?
Regards,
J

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
Years ago there was a program called mail switcher which added this functionality, but thats gone.
cheers
Tom

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

How can I change my Creative Cloud Team account to Single user?

From a mistake I have extended my Creative Cloud account as Team account, however I would like to use as a single user. As the abonement has been already done, is there any chance to modify? Thank you!

Hi katrikuu
I noticed you had an educational version of Production Premium CS5 registered. Unfortunately, the offer pricing is not available to Education, OEM or volume licensing customers as per the terms of the offer: https://creative.adobe.com/plans
If you have other Creative Suite software that may qualify, please let me know.
Kind regards
Bev

How to add multiple groups in a single user in ldap

I have problem with ldap ,Please clarify the following problem.
My request is --> send the multiple groups at a time with single user.
My code contain single user and single group is working.
Please see the source file ,please solve my problem. i tried , but i did not get.
package com.ldap;
import java.util.Hashtable;
import javax.naming.AuthenticationException;
import javax.naming.Context;
import javax.naming.NameAlreadyBoundException;
import javax.naming.NamingException;
import javax.naming.directory.Attribute;
import javax.naming.directory.Attributes;
import javax.naming.directory.BasicAttribute;
import javax.naming.directory.BasicAttributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
* This class provides methods for the user management
* @author sudhakar
public class LdapUserMgr {
 public final static String USER_ID = "uid";
 public final static String COMMONNAME = "cn";
 public final static String SURNAME = "sn";
 public final static String MEMBEROF = "wlsMemberOf";
 public final static String MEMBEROF1 = "wlsMemberOf";
 public final static String PASSWORD = "userpassword";
 public final static String EMAIL = "mail";
 * This method creates new user in the embedded ldap registry
 * @return
 * @throws Exception
 public void createUser() throws Exception {
 DirContext ctx = getLDAPConnection();
 String userId="sudhakar";
 String userName="sudhakar";
 String userRole="Assessor";
 String password="sudhakar123";
 String email="[email protected]";
 try{
 Attributes attrNew = new BasicAttributes(true);
 Attribute objclass = new BasicAttribute("objectclass");
 String group = "ou=groups,ou=myrealm,dc=sudhakar_domain";
 String people = "ou=people,ou=myrealm,dc=sudhakar_domain";
 // add all the object classes required for the user profile
 objclass.add("top");
 objclass.add("person");
 objclass.add("organizationalPerson");
 objclass.add("inetOrgPerson");
 objclass.add("wlsUser");
 // put all the attributes required as part of the user profile
 // add object classes
 attrNew.put(objclass);
 // add user Id
 attrNew.put(USER_ID, userId);
 // add user common name
 attrNew.put(COMMONNAME, userName);
 // add user surname
 attrNew.put(SURNAME, userName);
 // prepare the group path for the user
 String role = COMMONNAME + "=" + userRole + "," + group;
 // add user to a group
 attrNew.put(MEMBEROF,role);
 System.out.println("user role is "+role);
// i want to pass multiple user roles at a time
 // add user password
 attrNew.put(PASSWORD, password);
 // add user mail Id
 attrNew.put(EMAIL, email);
 // Prepare the query string to add the user to the embedded ldap
 String query = USER_ID + "=" + userId+ "," + people;
 System.out.println("user query is "+query);
 // add the user to the LDAP directory
 ctx.createSubcontext( query, attrNew );
 System.out.println("user" + userId+ "created");
 catch ( NameAlreadyBoundException nabe ){
 System.out.println(nabe.getMessage());
 throw new NameAlreadyBoundException("User by this name already exits");
 catch (NamingException namEx) {
 System.out.println(namEx.getMessage());
 catch(Exception ex){
 System.out.println(ex.getMessage());
 finally{
 closeLDAPConnection(ctx);
 public DirContext getLDAPConnection() throws Exception{
 DirContext ctx = null;
 try{
 Hashtable<String,String> env = new Hashtable<String,String>();
 env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
 env.put(Context.PROVIDER_URL, "ldap://192.168.100.84:7030/");
 env.put(Context.SECURITY_AUTHENTICATION, "simple");
 env.put(Context.SECURITY_PRINCIPAL, "cn=Admin");
 env.put(Context.SECURITY_CREDENTIALS,"admin");
 // Create the initial directory context
 ctx = new InitialDirContext(env);
 return ctx;
 catch (AuthenticationException authEx){
 System.out.println(authEx.getMessage());
 throw new AuthenticationException("Authentication failed");
 catch (NamingException namEx) {
 System.out.println(namEx.getMessage());
 throw new NamingException("Naming Exception");
 catch(Exception ex){
 System.out.println(ex.getMessage());
 throw new Exception("Exception Occured");
 * This method closes the LDAP connection
 * @param ctx
 public void closeLDAPConnection(DirContext ctx){
 try{
 ctx.close();
 catch(NamingException nex){
 System.out.println(nex.getMessage());
 catch(Exception ex){
 System.out.println(ex.getMessage());
 public static void main(String s[])throws Exception{
 LdapUserMgr ldapUserMgr = new LdapUserMgr();
 ldapUserMgr.createUser();
Edited by: sudhakar_kavuru on Jun 16, 2009 1:58 AM

Hi Sudhakar,
try some thing like this.Here I have enclosed the code snippet.
 String query = USER_ID + "=" + user.getUserId()+ "," + people;
 // add the user to the LDAP directory
// ctx.createSubcontext( query, attrNew );
 Attribute att1 = new BasicAttribute(MEMBEROF);
 String roleName=user.getUserRoleList().get(0);
 String role1 = COMMONNAME + "="+roleName+"," + group;
 att1.add(role1);
 attrNew.put(att1);
 DirContext dirContext =ctx.createSubcontext( query, attrNew );
 for (int i = 1; i < user.getUserRoleList().size(); i++) {
 Attributes att2 = new BasicAttributes();
 String roleNameStr=user.getUserRoleList().get(i);
 log.debug("roleNameStr--->"+roleNameStr);
 String role2 = COMMONNAME + "="+roleNameStr+"," + group;
 log.debug("role2-->"+role2);
 att2.put(MEMBEROF,role2);
 dirContext.modifyAttributes("", DirContext.ADD_ATTRIBUTE, att2);
 }

Single User Story Multiple Teams

Similar Messages

Maybe you are looking for