Single users getting Dimension must defined once error in Smartview

I have a user that is refreshing a Smartview sheet in Excel "Formula Driven" when they refresh they get a message - Error in Grid XML each dimension must be used once and only once - and per the connection info at the bottom of the worksheet prior to the refresh thay are not in adhoc but after they refresh they appear to be in adhoc.
Multisheet Excel workbook but only 1 sheet has HSGETValue
Same user can log in another PC and open same sheet and it works fine. HFM 9.2, SmartView 9.2, Office 2003,

Please beware they should not be using Refresh, but Refresh All.
I was able to replicate the error, however, while the Refresh All work the first time, it error out on the second try, this is not a good solution. I will continue testing, Adhoc analysis is kicking in without being requested, this may be something you want to open a case with Oracle.
Edited by: Raul Rodriguez on Feb 13, 2009 1:26 PM

Similar Messages

While creating the user getting iPlanetAMUserService does not exist error.

Hi,
I was trying to create a user in access manger 7.1 console . I am getting error like iPlanetAMUserService does not exist.
path: Access control>Realm>Subjects.
can anyone please help me to give the suggestions.
Thanks
GV

And why do you think those jars are required? Guess work? Glassfish already provides them, remove them from the application deployment and try again.

Href="Outlook:Inbox" does not launch outlook in windows 7 when in Firefox. User gets some sort of protocol error

I have an application with a link to launch outlook. Client has upgraded to windows 7 and the link no longer works and produces a protocol error of some sort.

Using "Outlook" as a protocol is no longer support, not even in Internet Explorer (under Windows 7), as far as I know.
Thanks for asking.

Agetty fails to start after switching out of single user mode

Every time I switch to runlevel 3 from single user mode, agetty fails with this error:
Jan 29 10:19:28 localhost agetty[1445]: /dev/tty1: cannot open as standard input: Input/output error
And since it fails, init disables it for 5 minutes… This always happens on the virtual console I run "init 3" on; the other consoles work fine.
This is how I run agetty from /etc/inittab:
c1:2345:respawn:/sbin/agetty -8 -s 38400 -a ma --noclear tty1 linux
Disabling auto-login and removing the --noclear option does not make any difference. Does anyone have a clue what is going on? It is more of an inconvenience than a problem, but still… I am using early KMS on an ATI Radeon 9550 card, by the way.

So nobody else has been bitten by this stupid bug?
Anyway, it happens on a pure VGA console too, so it has nothing to do with the video driver. And I take back the “more of an inconvenience” part – it is freaking annoying that one can not just properly change the runlevel. Oh well…

I keep trying to download reader but get an error message stating i have no rights or authority to do so on my single user pc

i keep trying to download reader but get an error message stating i have no rights or authority to do so on my single user pc

You either need to be logged in or run the installer as an Administrator user.
If you already do that, can you post the exact message you are getting?
And yes, knowing your operating system would help.

Had BSoD, entered single user, when rebooting get airport error..over and o

I had blue screen after installing leopard. I entered single user, removed some files suggested in another thread and then exited to reboot. I see:
Nov 17 Macintosh com.apple.launch[1] (com.apple.airport.updateprefs[]: posix_spawnp("/System/Library/PrivateFrameworks/Apple/80211.framework/resourses /updateprefs", ..): No such file or directory
I get this over and over and over and over. I assume this is why I had the BSod. Not sure how to get rid of it.
Any ideas?
Thanks!

I would recommend the following basic configuration for your network:
o Configure the D-Link as your primary Internet router that also provides the PPPoE authentication credentials to your ISP for Internet connectivity.
o Configure the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge and connected to the D-Link by Ethernet. Also configure the AEBSn with the "Allow this network to be extended" option enabled.
o Configure the Time Capsule (TC) with the "Wireless Mode = Extend a wireless network" option enabled. It will be used to extend the wireless range of the AEBSn to the upstairs location.
o Finally configure the AirPort Express Base Station (AX) to join the extended wireless network so that it will be available for iTunes streaming.

500 internal server error for only single user

Hi Experts,
Pls help me that
I am getting the problem of 500 Internal server error for a single user .
Except that user remaining users are not getting this error, They are working fine
i.e it is ESS & MSS Package all other application working fine , this iview came from Webdynpro .
Regards
Krishna

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

Session expired error for single user

Hi,
I'm getting a SessionExpiredLongJumpException in our prod portal but only for one single user.
All other users can access the same page.
The defaultTrace log has a specifric time in the error message saying
'...or session has expired before Sat Jun 26 16:44:18 BST 2010' This seems very specific.
Any idea why this is happeneing?

Check your browser settings for accepting cookies from this domain, you must have tried this by now clearing all your browser cache and cookies.
try solutions beacon site where they have Oracle Apps Demo Instances for Public
http://www.solutionbeacon.com/tools_vision.htm

Bluetooth errors (hundreds) in single-user mode

Never had this in Tiger or Panther but...
When starting in single-user mode I get hundreds of USB Bluetooth errors.
Also all too often (approx. every other day) when rebooting I loose use of my Bluetooth Apple keyboard and have to use Leopard Cache Cleaner to clean the user and system caches... after which the keyboard is once again functional.
Even though */sbin/fsck -fy* gives the system an okay after the hundreds of errors... I can restart and again get the same errors.
Here is an image of what it looks like (a little blurry but if you're familiar with such errors perhaps you'll recognize them). If necessary I'll take another photo of the screen and post it.
http://www.theimagecache.com/downloadarea/forum_images_misc/single_usererror.html
Thanks for any advice on how to get rid of these errors once-and-for-all.

A wireless bluetooth keyboard would only let you boot into Single User Mode, after that, you will need a regular USB keyboard to type in the prompts, same goes when doing a Hardware Test using the disc provided.
As for some users posted on this forum saying they have not able to continue the Single User Mode under a regular USB keyboard, I am afraid I am one of them... I have not been able to solve the problem as yet and it is kinda "annoying" that there "may be something wrong" with my iMac that I cannot perform fsck, nevertheless I have regularly booted from the OS disc and run Disk Utility, which is equivilent to booting to SUM, but supposingly much better, and my HD checks out fine... so at the moment I have no worries.
In my post there is another person who has regularly keeping me update about this problem and has deduced it maybe due to the internal bluetooth module and the USB inside... rather complex issue that may require me lengthy conversation with AppleCare or have something replace, or "worse" have my iMac sent away for a time for repair or replacement. Since my iMac is doing quite fine, I'll live with it for the moment...
Cheers

Getting Data Off Harddrive in Single User Mode

When my PowerBook G4 running 10.3.9 boots after the white apple screen I just get a blue screen and my mouse. I am able to boot into single user mode and get to the data on my harddrive. My other computer at home is a linux box so if I could just get the network going in single user mode I could ssh all of my stuff to the other machine. Is there any way to do this. Is there any other good way to recover my data?

Hi dsignoff,
   This is likely to be more difficult than it sounds. If the problem isn't a failed hard drive, you might have an easier time simply doing an archive-and-install. Of course any installation except a fresh install will preserve your home directory but an "update" installation stands a reasonable chance of not fixing the problem.
   Even if you do succeed in moving everything to the linux box, you will likely lose the resource forks and file metadata of the files.
   Of course even if you do try an archive-and-install, it never hurts to have some backup. I'm a bit rusty with Panther but I believe that it requires the following as a first step:
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
That actually starts quite a bit of the system, possibly including the part that is causing Aqua to fail to start up. (meaning that it too could fail) However, if the above command succeeds, the next step is to execute:
/sbin/SystemStarter start Network
You may also need:
/sbin/SystemStarter start NetworkExtensions
If all of that works, you should have enough services available to ssh to the Linux box and move files. Of course there is a chance that if you find the error messages of the process that is failing in the /var/log/system.log, we could actually recommend a fix for the system.
Gary
~~~~
   "The wages of sin are death; but after they're
   done taking out taxes, it's just a tired feeling:"

Errors while Changing the Database to Mutli User Mode from Single user mode in SQL Server 2012

Hi,
Good Afternoon :). Need your help in resolving one of the issue with SQL Server 2012.
Today, we kept one of the database in the Single User mode and wanted to bring back to Multi User mode. But we are getting the below error. There are no user sessions connected to this database which are blocking each other. I see multiple
SYSTEM sessions are in blocked state.  The blocking is not cleared even affter restarting the SQL services.
Verified the SQL Server Errorlog and couldnt get much useful information to troubleshoot the issue.
pasted the information from the sys.sysprocesses as well for your kind reference.
Msg 1205, Level 13, State 68, Line 1
Transaction (Process ID 55) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
spid
kpid
blocked
waittype
waittime
dbid
login_time
status
cmd
18
1004
36
0x0005
144
5
4/9/2014 13:13
background
TASK MANAGER
35
1796
36
0x0005
35
5
4/9/2014 13:34
background
TASK MANAGER
36
2464
37
0x0005
363
5
4/9/2014 13:34
background
TASK MANAGER
37
5100
36
0x0005
254
5
4/9/2014 13:04
background
TASK MANAGER

Clearly 36 and 37 are causing deadlock.
see
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
http://www.mssqltips.com/sqlservertip/1036/finding-and-troubleshooting-sql-server-deadlocks/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Stuck in single user mode and can not get past it

I am experiencing a problem I recently had lent me a Mac g4 tower. I decided to upgrade to tiger and accidentally set the start-up preference to the disc, every time I boot up it goes into single user mode, if I boot up holding the option key it brings up 3 icons on the right is an arrow in a circle formation which is refresh at a guess in the middle is the hard drive which is depressed kind of thing and on the right is a straight arrow. I have tried selecting each of these individually and even pressing enter all but the refresh icon goes back into single user mode. When the disc is in and I go to this it does not ring up the disc as an option.
I have zapped the PRAM reset the CUDA button and even telling it to reset the NRAM etc.
I have tried it with the disk in and out and all paths lead to the same outcome it starts up I hear the tone and the screen goes grey with an apple icon on then it goes to lack screen saying localhost:/root#.
I have also used the (fsck –fy) in single user mode to scan the disk and it says it appears to be ok. I have done all these steps multiple times but I am still getting the same outcome.
I have also tried pulling the logic battery and pressing the cuda switch and leaving it to stand and even pulling the RAM but this has not worked and I am still getting the same out come of been put straight in to single user mode.
I have tried starting up in safe mode but again this just goes to single user mode as well.
As yet I have not tried booting up using this machine as a slave drive or using another Mac as a slave drive and seeing what this out come does as I have not got access to another Mac at this time.
Unfortunately I do not have the original discs that came with the machine either so can not even boot from them.
Any other ideas would be greatly appreciated thank you.
Please read my post properly thanks.
I have tried several key commands such has D, C and even holding (option, command, shift and delete) when i do this it just brings up a folder with two changing flashing icons.

Ok checked them out and followed the instructions given, but still getting the same outcome, looked at the system log and it tells me.
localhost login: PAM pam_inithandlers:no default config /etc/pam.d/other
localhost login:PAM error reading PAM configuration file
localhost login:PAM pam_start:failed to initialize handlers
localhost shutdown: halt by andy
Any more ideas???

How to get to single user mode

I aquired an old power mac G4 with an old account with 10.3.9 and an old administrator account. It seems that procedures to remove the account start in Single user mode. The computer won't start when holding down system - s. The drive clicks a few times but the display goes to sleep from no video signal. So How can I get to single user mode when the usual way don't work?

The hard drive's directory may be dead, or it may have last been booted into Mac OS 9. IF you are lucky, they did install Mac OS X on it, and that can be determined either through an Option key boot, or through an X key boot on a wired (not wireless) USB Apple compatible keyboard. X key booting will only work if the X operating system is on the same partition, whereas Option key boot will reveal the Startup Manager, where you select the drive and hit the right pointing arrow for the drive partition that has Mac OS X. Note this will not work on an original PCI PowerMac G4. You may also need to replace the PRAM battery, a 1/2 AA 3.6V battery from Radio Shack before any boot sequence will work. Once it boots into Mac OS X, Single User Mode should work.

Network message format error. GET request must have a QUERY_STRING value

I have installed new Content Server 10gR on my laptop.
Web Server is : Apache 2.2.4
DB is : Oracle 10g (Standard Edition)
Platform : Windows
CS is up & running. I am able to login and browse through content store. But when I try to perform any type of Submit operation anywhere in CS Portal ( for example "Updating My Profile and clicking on Submit" ) I get following error:
"Network message format error. GET request must have a QUERY_STRING value (the CGI parameters on the URL) "
1. Does any one know why I am getting this ?
2. Is some configuration missing for Apache which connects Apache with CS ?
Below is the httpd.conf changes:
LoadModule IdcApacheAuth D:/oracle/ucm/idc/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB idc "D:/oracle/ucm/idc/data/users/userdb.txt"
Alias /idc "D:/oracle/ucm/idc/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>
3. One things that I see that before hitting the Submit button the URL is:
http://delrpatha76669.sapient.com:8989/idc/idcplg/?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE&Auth=Internet
And after hitting Submit button on "My Profile" the URL becomes:
http://delrpatha76669.sapient.com:8989/idc/idcplg/
I guess part of URL gets truncated/missed etc and so we are getting this error ?
Any way to fix this ?
Edited by: user12188052 on Sep 21, 2010 10:10 AM

This issue is resolved.
Cause
- After installation when I started CS , I saw "D:\oracle\ucm\idc\weblayout\idcplg" folder missing error in logs. Reason why I created this "idcplg" folder inside "weblayout" folder was because I thought it was not created during installation. I created this folder & copied "idc_cgi_isapi.dll" this file into it.. This was the issue
Fix
- I deleted the folder "D:\oracle\ucm\idc\weblayout\idcplg" and everything started working fine now.

Analytical Services failed to get user's parent group tree with Error

Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Single users getting Dimension must defined once error in Smartview

Similar Messages

Maybe you are looking for