Single Vendor Multiple customer with same address

Hello Guru,
I have one scenario in retail business.ie I have one single vendor with two different customer but the address of that customer is same in both of them.i.e the vendor address will be same(applicable) in both the customer.But the VAT number is different in both the customer when ever i create the vendor master system should ask the different VAT number.
Regards,
Sukdev.

Yes. I could have laid odds that this would be the first response :-)
I know it is unusual, and I am aware of the inherent issues with doing something like this. I have read the multipathing guide, but it wasn't that helpful, because I want the same IP address, not just the same subnet. It is NOT for load balancing, or failover support. I'm afraid I can't give too much detail at the moment because of the nature of research project. What I will add is that I want to do this on an 802.1q enabled NIC, on the same physical port, with different logical interfaces for each VLAN having the SAME IP address.
We can already do this on Linux, and as I said in the original post, the route man page suggests that it can probably be done on Solaris. What I really need to know is how?
Any takers?
AJB

Similar Messages

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

If vendor and customer r same how we clear

Hi
if for the claint
both vendor and customer r same
in such a case what configuration is need
and if clearing is required between both
what steps required
i know 1 thing only eg in vendor master give customer number ,that thing only i knew ,
plz explain and give steps

Hi,
If you are purchasing as well as selling to the same party i.e. customer and vendor are same, you can do following.
1) Create Customer Master Data for the Party.
2) Create Vendor Master Data for the same Party.
3) Go to tranaction for Change Customer, go to Control Tab and specify the Vendor No in Vendor field.
4) Go to Payment Transactions tab, select the indicator "Clearing with Vendor".
5) Repeat steps 3 and 4 for Vendor Master data change as well. Specify Customer No in Customer field of Vendor Master and also select the indicatro "Clearing with Customer".
This will help. Pls. assign suitable points.
Regards,
Chirag

Customers found with same address; check Message f2145

Hi All,
I just wanted to tell you my requirement Ex. suppose i have customer with 2 different address and user want to create 2 customer code with 2 different address and 1 customer is already in sap and user want to create another code with same name but address will be different......at the time is user enter the Name Field system given error "Customers found with same address; check". I have gone through the post but i did not get solution.
Please provide me solution.
Regards,
Abhijeet

Hello,
follow the menù path SPRO --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for Creating Customer Master Data --> Change Message Control for Customer Master Data" enter ther error message nummber 145 and set it as a warning (W) or switch it off. Refer to the documentation of the customizing task for more information.
Best regards,
Andrea

HT4352 problem sharing iTunes with new Apple TV.(model MD199LL/A. I have iTunes and Apple TV set up with same address and passwords, enabled iTunes and Apple TV for home sharing and still nothing? I have latest iTunes and Apple TV update. Any other sugges

Have a problem with Home Sharing with Apple TV and iTunes. Have latest iTunes and Apple TV downloads. Have both items set up for home sharing with same address and passwords. AppleTV running fine for everything else. FYI, my library is about 60gigs. AppleTV model is MD199LL/A if that matters. Really want to hear my entire music library and not just Purchased items. Thanks for any help!!!

I have an older PC with Windows XP Professional on it. I updated to the latest iTunes and I am able to access the photos, etc. on it. However, my Windows 7 PC still does work (since last Apple TV update). Apple TV does not recognize that Home Sharing is turned here. The latter PC has all my current photos on it which I would like share with others on my Apple TV. A fix would be appreciated.

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple interfaces with same IP address?

Can anyone suggest how to configure multiple (logical or physical) interfaces with the same IP address?
There is a teaser in the solaris 8 man page for 'route' that suggests this is possible:
"In a change or add command where the destination and gateway are not sufficient to specify the route (for example, , when several interfaces have the same address), the -ifp or -ifa modifiers may be used to determine the interface or interface address."
I can find no other reference to -ifp or -ifa, and at the moment I cannot seem to bring up two interfaces (logical or physical) with the same ip address.
I realise this is an obscure config. Anyone intimately familiar with route of ifconfig?
AJB

Yes. I could have laid odds that this would be the first response :-)
I know it is unusual, and I am aware of the inherent issues with doing something like this. I have read the multipathing guide, but it wasn't that helpful, because I want the same IP address, not just the same subnet. It is NOT for load balancing, or failover support. I'm afraid I can't give too much detail at the moment because of the nature of research project. What I will add is that I want to do this on an 802.1q enabled NIC, on the same physical port, with different logical interfaces for each VLAN having the SAME IP address.
We can already do this on Linux, and as I said in the original post, the route man page suggests that it can probably be done on Solaris. What I really need to know is how?
Any takers?
AJB

Multiple Basestations with same IP address

I currently have 4 apple airport basestations, all of which are extending the same wireless network. this setup seems to work fine, however, all of these basestations show up with the same Ip address. I set the first one up statically with the ip of 192.168.2.6 and then each device after that I had it copy the settings from the first. Each time it did so, each device showed up with that same address inside of the airport utility. If I ping 192.168.2.6, i get a response, but which device is responding? Is this what's supposed to happen when using these devices in extend mode?

Strange, Going through each device with a the setup wizard, at no point did it ask for a different IP. The original base station was set up with a static IP, i would think it should ask me for a new, different IP, since I has specified that I was adding a device.
Either way, I set a separate IP for each device and now it seems to be just the same as before...but with more IP's!

How do you handle multiple at the same address?

My wife just got an iMac. She is using the Birthday feature in Address Book and iCal to track our friends and family birthdays and anniversaries.
Question:
How do you track it when multiple people are at the same address? For instance, our friends are a family of four, but they all live at the same address. Do you need to make a separate Address Book card for each of them, even the 1 year old baby? Or can you track multiple people in a single card with custom fields?
If you do need to make multiple cards, then how do you handle mailing lists? For instance, if I make separate cards for all four of them, how do I make sure I only send on Christmas card when I use my Mac to print labels?
Thanks for any advice.

This is really an issue that you're going to have to resolve yourself since Apple's address book isn't really built with this in mind - darn it. For me there are three scenarios. First, a singleton. No problem. Second a family for which all members share the same information - acquantences to whom I don't send birthday greetings. These get one card and I'll put in both (or all) their names in the first name field (as in Bob and Jean). If there are children, in the last name field I'll add 'and Ken' or 'and the kids'. Third, a family for which some fields are different - perhaps cell phone number, birthday, etc.
For mailing purposes, I create a holiday group and put the people I'll be sending cards to into the group.

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Bill to Intercompany customer with 2 address

Dear Experts,
I have a scenario for Intercompany Sales from two Plants (one in Maharashtra & the other at Gujrat). We have set up the Intercompany customer and assigned the plant to the ordering co. code / S.org. Untill now every things fine.
During intercompany billing both the plants will raise the bill on the same customer no. The problem arises that in Maharashtra we charge VAT. But in Gujrat it cannot charge VAT as the address is of out side state & Customer Tax Clss is maintained 1, one cannot go on Changing the address for every IV transaction.
Can we have two I.C. customer assisgned for the same S.organisation with different address. Please suggest.
Awaiting your early response.
Regards,
Pramod Kumar

you can assign same customer with two BP in customer master..........

Single Vendor Multiple customer with same address

Similar Messages

Maybe you are looking for