Singles sales order shipping from  multiple plants in different lega entiti

We are a global Mfg and distributor of scientific instruments. Due to the complexity and delicate nature of these instruments we may need to ship product from as many a three different shipping points / plants that are each owned by a different legal entity.
Does SCM have any functionality to automate the co-ordination of the multi-plant shipment so that all the product can be shipped to arrive at the customer site at the same time ?

Hi,
How do you plan to make the order entries? What is the criteria to ship the product from different plants?
Please clarify if you're talking about the same product being shipped from different plants or different products shipped from different plants? I can think of two scenarios because of  some ambibuity in your posting.
1. Same product from different plants: If this is case, How do you plan to decide to split the order quantities  to be shipped from different plants into multiple lines in the sales order?
2. Different products from different plants based on some criteria: If this is the case, I understand you will enter multiple order lines.
In both the cases, there is something called 'Delivery groups' in ECC that is attached to Correlation Profiles in SCM GATP (though delivery groups can be used in ECC stand alone) which will make sure that all the items within the same delivery group have the same delivery date, ultimate delivery date will be the latest delivery date of all the items.
Hope this is what you're looking for. If not, elaborate your requirement to help you better.
Regards
Mohan

Similar Messages

  • Stoping Sales Order types from specific plant

    Dear Friends,
    My client want to stop creation of specific sales order types from a specific plant. Means if that specific plant entered in sales order then system should not process that sales order further.
    Note : Material transference must not be affected while implementing above requirement.
    Kindly suggest the solution in this matter.
    Thanks & Regards,
    Savi

    The best way would be to prevent this through your organizational design (Enterprise Structure)
    You can limit which plants can be used for each combination of sales org/distribution channel  & you can define which order types can be used for a given sales area.
    You can use exclusion procedure and records to stop the combination of orders type and plant. This is not a use fiendly solution as the user doesn't receive a very useful error message.
    You can use the user exit as mentioned before.

  • APO gATP vs R/3 ATP - To check sales order ATP across multiple plants

    Hi There,
    I am trying to evaluate gATP functionality for SD sales orders.
    The primary requirement is to have sales order ATP checking take place across multiple plants.
    E.G.
    Sales order line is entered for qty 100
    60 is available in plant A, 40 is available in plant B
    System checks both plants and creates 2 lines - one for delivery from plant A and one for delivery from plant B
    (we are currently heading down the road of writing ABAP to do this 'multi-plant' check in R/3 but the more complex the requirements get the more interested I am in understanding more about APO/gATP)
    I would like to understand the benefit of implementing APO / gATP as opposed to using standard R/3 ATP and perhaps writing custom ABAP code to search for inventory across multiple plants.
    I would appreciate any insight regarding what is required to setp gATP to perform such checking and any other feedback regarding this issue - especially if you have had to implement something similar at your company.
    I have looked here but not much clear help:
    http://help.sap.com/saphelp_scm50/helpdata/en/26/c2d63b18bc7e7fe10000000a114084/frameset.htm
    Thanks,
    Niall

    Hi Niall
    you are probably looking at RBATP (Rule based ATP). Look at transaction /sapapo/rba04 in APO where you develop your own location and product substitution rules. Going down an ABAP road in R/3 may work short-term but not long-term as the requirements may get more complex.
    Regards
    Srinivas

  • Multiple deliveries from a single sales order

    Hi all,
    Can any body explain how to Configure the process to create multiple deliveries for one sales order and one invoice for these multiple deliveries.
    Thanks and regards,
    Dinesh Kumar

    Hi,
    In customer master in shipping screen of sales area data we have a field for partial deliveries. SAP allows 9 maximum deliveries for a single sales order. The partial deliveries should be allowed otherwise the system will not allow you to create multiple deliveries for the same order.
    Create a sales order in VA01, save it. Go to VL01N and as per your requirement change the delivery qty. For example the order qty is 50. For the first time when i go to VL01N, in the delivery qty field i will change it from 50 to say 10, accordingly i will pick 10 pc only and I will do PGI. The next time i go to VL01N the system will show me 40 in delivery qty field. I will change it from 40 to 10 and do the picking & PGI. Similarly i do the same thing 3 more times. Now my sales order qty is 50 and i have 5 deliveries for this sales order.
    <b>Creating single invoice:</b>
    Go to VF01 and enter all the 5 different delivery numbers there and press  enter. Click on execute or press "F8" the system will take you to a screen where it will show you 5 line items of the same material with 10 quantities each. Save the invoice. Thus you created a single invoice for multiple deliveries of a single sales order.
    <b>Invoice split:</b>
    Suppose when the delivery of the items is being done for different shipping addresses then the SH is different. Now the invoice will split - means after you enter the 5 delivery numbers and press "F8" the system will show you a button for "Split Analysis" If you click on this the system will show you the criteria because of which the split is taking place. The followig are important for invoice split:
    1. Ship to party,
    2. Incoterms,
    3. Billing date,
    4. Reference number
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Creation of Multiple billing documents from a Single sales order

    Hi Experts,
    How can we create many billing documents from a Single sales order.
    Will it be possible we create a Sales order with bigger quantity and then keep on creating partial billing documents based on the billing quantities and dates.
    Request you all for a solution.
    Thanks
    Montee

    Hi ,
    1. If Qty is one number - based on value of the order - it is possible to create different billing doc.'s based on billing date and value using billing plan , again these are periodic billing or milestone billing
    2. Using Contract process- create material /qty contract- release partial qty  by creating release document and create billing document w.r.t to contract or release document (sales order)
    thanks
    Chidambaram

  • Sales order does not extract plant information from material master data

    Hi experts,
    I have created a sales order. However, the plant in the shipping tab can only be manually entered.
    I have made the check:
    the customer material master data does not have the plant info.
    the customer master data does not have it either.
    It is defined in the material master data: sales:general/plant
    But the sales order did not extract this information. Why does this happen?
    Thank you in advance.
    Best regards,
    Fan

    Hello Friend,
    As right stated by you,
    The Plant will be copied from the master data to the sales order, if not it should be manually entered
    The Sequence System will search for the Plant is as follow..
    1. Customer material infor record, If it was not maintained then it will search in
    2. Customer master, if the entre was not maintained in the SHIPPING TAB
    3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
    So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
    This might be the issue.
    Please revert if you want further details
    regards,
    santosh

  • Sales Order-Shipping Conditions from Sold-to-Party

    Hi Guys
    When sales order created, shipping conditions copied from Sold-to-Party.  At that time, in SP, shipping conditions maintained wrongly. 
    After creating Sales Order, shipping conditions modified in SP, but system not allowing to modify shipping conditions in sales order.  Because of this, shipping point has not been determined.  Could not change manually also.
    Please suggest on this.
    Regards
    Uma

    Dear Uma
    On your comments
    "Because of this, shipping point has not been determined",
      I dont think, it could be bcoz of shipping condition.
    If Shipping Point is not flowing in sale order, then you need to check in OVL2 where you have to maintain the shipping point for the combination of Shipping Condition from Customer Master, Loading Group from Material Master and Plant.  So check whether you maintained this. 
    Meanwhile, with regard to the field Shipping Condition which you could not make change, please note that even if subsequent documents are generated, this field will be in editable mode only and if you try to change, system will give you a message
    -  Shipping Conditions were changed, Redetermine Routes and shipping of all items
    and if you click "Redetermine", the new shipping condition will take place.
    So, can you please let me know whether your sale document type is copied from standard OR where the screen controls are there.
    thanks
    G. Lakshmipathi

  • Multiple pricing procedure in single sales order

    Hi Gurrus,
    i have come across in a scenarion where i need to have multiple pricing procedures in a single sales order.
    Does SAP support this functionality ?
    actually i am using a free goods, so for the trade item i want it to be charged at "SALES GL-Code" and for free good item i want it be be charge at "BONUS GL-Code".
    can anyone help me out that how can i handle this situation.

    Dear Shadab Ali      ,
    We can have only one pricing procedure .
    But the pricing procedure determined in the sales order can be changed to a different pricing procedure in billing (assigning pricing procedure to billing type)
    In your scenario, it is better you use 2 document type (one for trade and one for free )
    This way you can trigger two pricing procedure based on the scenario.
    Thanks & Regards,
    Hegal K Charles

  • Multiple Pricing Procedure in a single sales order

    i have come across in a scenarion where i need to have multiple pricing procedures in a single sales order.
    Does SAP support this functionality ?
    actually i am using a free goods, so for the trade item i want it to be charged at "SALES GL-Code" and for free good item i want it be be charge at "BONUS GL-Code".
    can anyone help me out that how can i handle this situation.

    Hi,
    Do not repeat the same question in different forums..
    to answer your question:
    No, not possible to have multilple pricing procedures to a single document.
    For your scenario, the trade item will be charged as lets say PR00, and this will have an account key mapped to GL1
    and for the free item, use the discount ctype R100 and map it to another GL--bonus GL and this should help you with your scenario.
    Regards,
    Raghu.

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • Single sales order to different ship to party

    Dear sd gurus very good mng
                         How to deliver single sales order to different ship to
    partys?
    thans in advance
    venu gopal reddy

    Hi Venu
    You have to create separate account group for Ship to Party customer XYZ
    Do the partner function determination & assign  SH for Ship to party customer
    Raise the sales order in VA01 & enter the Sold to Party Ex-  ABC & Ship to Party- XYZ
    Delivery will be done for the XYZ customer
    And also please check this below link it might be helpful for your issue
    http://forums.sdn.sap.com/thread.jspa?threadID=2081804
    Let me know if your problem is solved
    Regards
    Pradeep

  • How to print one sales order output from two printers using single command.

    Dear all,
    Our requirement is to print single sales order from two different printers, where as one printout for sales order output and another for sales order cash receipt.
    We developed two smartforms for both outputs.
    But we are struggling to assign the smartforms to single document type, which has to result two printouts after saving the sales order.
    Please help us to solve the issue.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

    Hi,
    You should define two different output type for your requests, one is for SO output, the other is for SO cash receipt. That's okay!
    Good luck
    Z.T

  • Single Debit Memo Request from Multiple orders - RRB

    Hi,
    I am wondering if it is possible to get Single Debit memo request from multiple Service orders after running DP90/DP97?

    Hello
    It is not possible Single Debit memo request from multiple Service orders after running DP90/DP97 in STD SAP.Even Z development will not possible for this.If even some how Z development possible.You will face billing process inconsistency.
    Br
    Rakesh

  • Open Sales Order  table with multiple schedule line....

    YUSUF BHORI wrote:
    Hi Experts,
    In Sales Order there are multiple schedule line for single item.
    Where and in which table i can find open qty for order ,material, item and schedule line items.
    I Want open items for each schedule line. For One vbeln, posnr there multiple etenr.
    Urgent,
    Yusuf.

    Hai,
    Join VBAK & VBAP and store data in an internal table GT_VBAP to get Sales order numbers, items, materials.
    Get Open Sales order items from VBUP into GT_VBUP  where VBUP-GBSTA  NE  'C'.
    LOOP at GT_VBAP.
    Read table GT_VBUP with key vbeln & posnr.
    If sy-subrc <> 0.
      delete GT_VBAP.
    endif.
    ****Fill your Final Report Internal table with required field values **Append into that internal table
    ENDLOOP.
    Now Select WMENG BMENG from VBEP into GT_VBEP for all entries in GT_VBAP.
    LOOP AT  GT_VBEP.
    *******Again Modify your Final Report internal table with these values
    ***VBEP-WMENG is Ordered Qty
    ***VBEP-BMENG is Confirmed Qty
    ************Open Qty     = Ordered Qty      = Confirmed Qty***
    ************Open Qty     = VBEP-WMENG = VBEP-BMENG.***
    ENDLOOP.
    Edited by: Eswara Rao Aakula on Dec 24, 2007 9:56 AM
    Edited by: Eswara Rao Aakula on Dec 24, 2007 9:57 AM

  • Selling Material From Multiple Plants

    Hi Experts,
    I have two questions.
    1. Is it possible to have more than one division for a material. If Yes, how we can do this.
    2. How to sell a material from multiple plants. What is the procedure,
    Thanks,
    Shan.

    hello, friend.
    1.  is it possible for a material to have 2 or more divisions?  yes and no.
    yes, if you leave the division in the material master blank.  the material, when processed in the sales order, then copies the division from the sales area of sales document.
    yes, if you configure cross-division, or if you configured the 'check division' options in the sales document type via VOV8.
    no, if you specified the division in the material master and you have made a sales transaction.  (it would still be a yes, if you made the right configurations using VOV8 described above).
    2.  how do you sell material from different plants?  by extending the material to the different sales org-distribution channel-plant using MM01.  be sure to maintain the Sales org 1 & 2, and Sales general/plant views for each combination.
    regards.

Maybe you are looking for