SIP/2.0 501 Not Implemented
Our 3845 SBC with:
C3845-IPVOICE_IVS-M 12.4(11)XW
close abnormaly the calls from Asterisk
platform with the message in the title.
Anybody hear something about ?
Best Regards
luciano
Hi,
"Call Leg/Transaction Does Not Exist" happens a lot with cisco, even between cisco routers. It should not cause any problem.
Note XW is still quite buggy, now XW5 is out and has many bug fixes.
Hope this helps, please rate post if it does!
Similar Messages
-
Flash sockets over SIP-protocol: HTTP/1.1 501 Not Implemented
Hi there.
I'm developing a chat app based on IRC server and flash client (flash sockets). Everything is OK but for some ISP flash client doesn't connect to IRC server: There are some logs from chat while connecting to IRC server:
Send: PASS password
Send: NICK nickname
Send: USER username
Receive: HTTP/1.1 501 Not Implemented
Receive: Content-type: text/html
Receive: Content-Length: 219
There is only thing I'm aware - this issue occurs for SIP mobile network provider only. For other non-mobile providers issue doesn't occur and chat works good.
I would really appreciate for any thoughts on this matter.Hi there.
I'm developing a chat app based on IRC server and flash client (flash sockets). Everything is OK but for some ISP flash client doesn't connect to IRC server: There are some logs from chat while connecting to IRC server:
Send: PASS password
Send: NICK nickname
Send: USER username
Receive: HTTP/1.1 501 Not Implemented
Receive: Content-type: text/html
Receive: Content-Length: 219
There is only thing I'm aware - this issue occurs for SIP mobile network provider only. For other non-mobile providers issue doesn't occur and chat works good.
I would really appreciate for any thoughts on this matter. -
Error while sending a message 501 not implemented
Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advanceHi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
... 20 more -
"HTTP error: 501 Not Implemented" error while uploading emp photo
Hi,
While uploading employee photo
getting error "HTTP error: 501 Not Implemented"
this error i am getting while linking employee photo to SAP.
pls suggest me how to solve.
thanx in advanceHi,
don't worry about the "HTTP error:501 Not Implemented The adminContRep command is an internal SAP R/3 command and not accepted by this content repository" error message, it only means that if you chosen the CSadmin button (or transaction) that this only developed from SAP content server and cannot be used for other 3rd party ones, like OpenText.
BR,
Janos -
HTTP 501 Not Implemented or HTTP 505 Version Not Supported
when trying to post on the ABAP Forum, i am getting the following:
The website is unable to display the webpage
HTTP 501/HTTP 505
What you can try:
Go back to the previous page.
More information
This error (HTTP 501 Not Implemented or HTTP 505 Version Not Supported) means that the website you are visiting doesn't currently have the ability to display the webpage, or support the HTTP version used to request the page.
For more information about HTTP errors, see Help.
i have tried from firefox, chrome and IE and unable to post.. i may look stupid and this may work here! lol!
but i have been trying for several hours to post a question on the ABAP forum... :o(You have been "bagged" by SAP Security's cross site scripting filter. No way around it (for obvious reasons). Somewhere in your post there is something that is interpreted as an xxs attack. Unfortunately, happens a lot when trying to post code or code terms. Some people have managed to work around this using some of the same tricks used by people wanting to post forbidden words and phrases like
myemal at sap dot com
j a v a s c r i p t
and the like. Try some experimenting and you might succeed. -
Native Webservices - ERROR 501: Not Implemented ... why?
I'm running Oracle xe 11G.
Recently I've tried to setup Native Web Services. I set up the database and user accordingly, defined a testfunction and accessed the database with following URL:
http://localhost:8080/orawsv/GUT/TESTWS?wsdl
This worked.
I did another test at another database, where I set up a defined user for webservices and granted this user execution privileges on the same testfunction. Accessing this function via SQL works OK. But when I issue a similar URL (http://localhost:8080/wwwsss/WSBRAN/TESTWS?wsdl) I get:
"ERROR 501: Not Implemented."
I did not find an error in my setup yet - so maybe somebody can hint me on the deeper meaning of this error! Where can I look to fix this?
Thanks a lot,
StephanOh, I should have called the servlet "orawsv" as it is described. Corrected this and now it works!
-
Hi,
In our portal some users are getting 501 not implemented errors in some front pages.After refreshing everything works fine.Any body have any idea?How this can be solved?
Regards
ImranHI
Error Message:
Error 501/505: Not implemented or not supported.
Translation:
This error may occur when using Internet Explorer in Windows XP to view a Web page. This error can be caused by either having the HTTP 1.1 setting enabled or by an interference with Internet Explorer by a third-party product. Since there are some Web sites that still use HTTP 1.0, connection issues can arise if you have HTTP 1.1 enabled.
Solution:
The easiest fix for this error can be found if HTTP 1.1 is enabled. To fix the problem, simply disable HTTP 1.1. You can do this by clicking Tools in Internet Explorer and going to the Internet Options menu. Go to the Advanced tab and uncheck the box next to Use HTTP 1.1. Click OK and test to see if the issue is resolved. If you have resolved the issue, do not proceed with the following steps. If the error still remains, go back to the Tools menu in Internet Explorer and select Internet Options. Next, click the Advanced tab and check the box next to u201CShow friendly HTTP error messagesu201D and click OK. The next time this error occurs, a more detailed error message should appear to tell you which program is interfering with the proper display of the Web page. The more friendly error message will say something to the effect of, u201CHTTP version not supported by program name,u201D where program name is the name of the program that is preventing the Web page from displaying correctly. You can either remove this program to attempt to solve the problem or you can contact the manufacturer of the program to see if there is a fix available.
Regards,
vijay. -
Intermittent 501 Not Implemented Errors
Just wanted to ask if anyone else had come across intermittent Error 501 -- Not Implemented Errors while using PeopleTools 8.51? We are using PeopleTools 8.51.02 and have come across this a few times in both campus solutions and financials (same tools versions).
Any ideas or suggestions on what might be causing it? Signs tend to suggest and AJAX related problem.PeopleSoft has also published this resolution on My Oracle Support (MOS) - E-PIA: PeopleTools 8.50 and 8.51 - Intermittent "Error 501--Not implemented" Messages when Navigating to a Page Using IE7 or IE8 Browser. Doc ID : 1337266.1
-
Rv042 Error 501 not implemented
Hi
My quickvpn setup has been working great for a few years but it stop working recently with the following error message in
wget_request_error.txt:
HTTP request sent, awaiting response... 501 Not Implemented
20:10:10 ERROR 501: Not Implemented.
quickvpn hangs on the dreaded verifying network stage.
Checked VPN router logs and also quickVPN client logs and confirmed the tunnel has been created successfully. However the ping was unsuccessful.
I look through the forum and confirmed that my quickvpn user account and password only contains alphanumeric characters.
Really appreciate if someone can please help me resolve this issue.
Thanks.Hi,
don't worry about the "HTTP error:501 Not Implemented The adminContRep command is an internal SAP R/3 command and not accepted by this content repository" error message, it only means that if you chosen the CSadmin button (or transaction) that this only developed from SAP content server and cannot be used for other 3rd party ones, like OpenText.
BR,
Janos -
MFE - Server Error 501 Not Implemented - Help Pls
Hi,
I have a Nokia E71 with MFE (latest version) installed and set up with the correct connection and credentials etc
Once i have run through the set up process i get an error which in the logs is viewed as follows:
PeakTime active
Setting OFFLINE Status to False
Missing Protocol Version Header. Reverting to EAS 2.0
HTTP Server Error 501: NotImplemented
Any help or advice would be greatly appreciatedFor anyone else who encounters this post, if you're synchronizing your device to an Exchange 2007 server, please try placing a new email in your exchange Inbox to see if that corrects the problem. This error is commonly encountered after a device synchronizes data using a synchronization application other than MfE.
If placing a new item in your Exchange Inbox doesn't work, please power off, then on your device, select MfE > Options > Full resync to synchronize your data.
Message Edited by iwilcox on 26-Jan-2010 09:45 AM -
Cure for "501 Method Not Implemented" error at site in Firefox but not Chrome or IE?
I am receiving a "501 Method Not Implemented" error message at a site in Firefox but not in Chrome or IE. How can this be cured?
Do you get that error if you access the site or if you click a link to got to another page?
You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]]
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Bearer capability not implemented
I am trying to use a Cisco AS5350 as a SIP gateway with an ATA 186 client using the SER sip server. I keep getting the following error messages?
Where should I look to determine the cause of the problem?
Thanks,
Stephen
Total call-legs: 2
1284 : 46480131hs.94 +-1 +0 pid:1 Originate 13125551212
dur 00:00:00 tx:0/0 rx:0/0 41 (bearer capability not implemented)
Telephony 3/0:D (180): tx:0/0/0ms None noise:0dBm acom:0dBm
1284 : 46480129hs.95 +-1 +3 pid:700 Answer 256
dur 00:00:00 tx:0/0 rx:0/0 41 (bearer capability not implemented)
IP 209.242.10.153:16384 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulawBased on the output above, I am guessing that you have ISDN trunks on this gateway. One possibility is that you are missing the following command underneath your serial interface for the D-channel.
isdn incoming-voice modem
Add the command and retry your call. A useful debug in this case would be debug isdn q931.
Ademola -
Codec G729 Bearer capability not implemented
Hello everyone,
I am having the problem interconnecting Cisco Universal Gateway AS5400 Version 12.4(11)T4 with ACME Net-Net 4250 and the disconnect code cause was 65 which mean Bearer capability not implemented. This problem happened only when using codec G729 and it was working with codec G711. I took almost a half month for troubleshooting this but could not find the fault. Can anyone have any idea what could be the problem?
Please find the trace in attachment file for both G729 and G711.
Thanks,
ChandyYou should also have the debugs set for the 2 scenarios to see what's different about the SIP call processing on the router in the 2 cases.
debug ccsip message
debug ccsip info
debug ccsip error
should be good. Make sure you also do the following:
Router(config)#no logging console
Router(config)#no logging monitor
Router(config)#service timestamps debug datetime msec
Router(config)#logging buffered <buffer size> debugging
Router(config)#service sequence
Router(config)#no logging rate-limit -
LE_SHP_DELIVERY_PROC in CNS0 not implemented
Dear All,
I am creating a delivery from project system using t-code CNS0, I am getting the following Error Message:
Error during copy of partner: Partner role SP
Message no. VL864
I found BADI LE_SHP_DELIVERY_PROC defined in CNS0(SAPLCNSH), but not implemented.
I want to know any other user-exit or ehnacement/BADI available for CNS0.
Regards,
Uday Desai
Edited by: Uday Desai on Dec 1, 2010 5:48 PMHi Klaus,
I have hanged the updkz = 'U'. then it's working fine.
IF ct_ylips[] IS INITIAL.
APPEND ls_lips TO ct_ylips.
ENDIF.
ls_lips-charg = ls_ekpo-revlv.
ls_lips-updkz = 'U'.
MODIFY ct_xlips FROM ls_lips INDEX lv_tabix TRANSPORTING charg updkz.
Thanks with Regards,
Vallamuthu M -
Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
JoeHi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you
Maybe you are looking for
-
Tell me it's not true... only 1 app at a time???
I never even thought to ask before purchasing. Seemed like a no-brainer, like not bothering to ask if your new car comes with a steering wheel. There's no way that Apple would have omitted something so basic as multitasking. There's got to be a way.
-
I lost my contacts and calendar, and photos since the iOS update and and it states that my iPhone cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 1 MB required). Also it shows that
-
Activities linked to CRM case object
Hi all, I know I can get activities related to a case with the API: e.g. use if_crm_cmg_api~get_elements where bor_type = 'BUS2000126'. Does anyone know which database table(s) this information comes from? E.g., where can I look up which activities
-
Authentication against a database table
Hi, I would like to know if there are way of doing the authentication of weblogic against a database table. I already saw the authentication working against the database users, but not against a database table. thanks rjc
-
Hi, How can I use a vector image (corel draw or illustrator) as a mask in after effects? I'm trying to use the stroke effect but i would like something different than the original masks. Thanks!