SIP 302 Move temporary failed
Hi All,
i`m i doubt that the following Sip message we are receiving from an Endpoint, connected via a Sip Trunk is right.
For me it seems there are Information missing.
Let me explain the traffic case
An Attandant console is connected via a Sip Trunk at the CUCM system that is running version 8.5.
In the case these Attandant console is switched to night mode and an internal cisco extension calling the internal or external queue number the call goes fail. ( Same happen when i calling from an external phone )
So we have these call flow
cisco Phone ----> CtiRP Number 8890 ---> Sip Trunk ----> Attendant Server ----> Night extension is 1221
The Sip signalling flow is right, we receiviing a SIP Message 302 Move Temporary with a contact address
[email protected] but not part of the content is the reason.
For me, the information regarding Diversion reason are missing but mandatory adn so the call goes fail
I would like to know your opinion if i`m right with my assumption or not.
Here the mentined SIP message.
SIP/2.0 302 Moved Temporarily
Via: SIP/2.0/UDP 10.16.2.30:5060;branch=z9hG4bKa7eaad3d04de73
From: <sip:[email protected]>;tag=71330652~42c66868-dbc5-40eb-bd1a-d30bb01b6fe7-43409571
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Aastra NeTS 5.6.6.0/1.5.4.19
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, INFO, UPDATE, REFER, SUBSCRIBE, NOTIFY
Supported: histinfo, replaces
Content-Length: 0
Contact: <sip:[email protected];maddr=10.16.1.30>
To: <sip:[email protected]>;tag=390634443
Best regards
Stefan
Hi,
i have checked the mentioned parameter and these parameter is already checked.
Deleting and reconfiguring the Sip Trunk does not solve the issue.
I`m getting all the time, at the specific traffic case the message 503 server unavailable.
At the cucm trace i can find the following,
|1,100,220,1.548666^10.16.2.30^*
15:24:50.202 |//SIP/SIPHandler/ccbId=0/scbId=0/findTrunkInfoByAddr: Cannot find the SIP Trunk with Name=10.16.2.30, Source Port=5060, IpAddress Type=0|1,100,220,1.548666^10.16.2.30^*
15:24:50.202 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_TRYING value=500 retries=6|1,100,220,1.548666^10.16.2.30^*
15:24:50.202 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|1,100,220,1.548666^10.16.2.30^*
15:24:50.202 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|1,100,220,1.548666^10.16.2.30^*
15:24:50.202 |EnvProcessUdpHandler::handle_input - handle = 322|*^*^*
15:24:50.202 |EnvProcessUdpHandler::handle_input Status: 0, Id: 0|*^*^*
15:24:50.202 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 504 from 10.16.2.30:[5060]:
Why the system tries to find an Sip Trunk instead of routing the call at the SIP Phone 8961 with number 1903?
Any hints?
Best regards
Stefan
Similar Messages
-
Printing 302 movements for GI from MB1B
Can someone tell me from were in config 1 can set up output so that 302 movements prints out.
we can print 301 but 302 outputsdoes not print to the spool.
Kind regardsHi
Check your settings in OMBR for item print indicator, and print version.
In OMB5 check what print indicator is maintained for your movement type 302.
Then you need to do output determination in the below config
spro>MM>inventory management-->output determination.
Then you need to maintain condition record MN21 for your output type and transation key WA and your print indicator and print version. Print version has to be selected when you do MB1b for 302.
Regards
Antony -
Move-ActiveMailboxDatabase Failed
Running Exchange 2010. I have a database copy between DB7 and DB8. I needed to reboot DB8 so I moved the active DB to DB7. It moved successfully. I rebooted the server with DB8. The server came back up and I tried to move the database back and got the following:
An Active Manager operation failed. Error: The database action failed. Error: An error occurred while trying to validate the specified database copy for possible activation. Error: Database copy 'MailDB8' on server 'MBX02' has content index catalog files in
the following state: 'Failed'.. [Database: MailDB8, Server: MBX01
An Active Manager operation failed. Error: An error occurred while trying to validate the specified database copy for possible activation. Error: Database copy 'MailDB8' on server 'MBX01' has content index catalog files in the following state: 'Failed'..
I tried reseeding and now the error shows that the DB is in a crawling state. When I looked at the logs, I see the following:
Log Name: Application
Source: CI Troubleshooter
Date: 3/26/2015 8:18:32 AM
Event ID: 5603
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: DB2.com
Description:
Reseeding failed for the content index catalog of mailbox database MAILDB8. Reason: System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3111\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies")). Database copy states:
Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAILDB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAILDB8\MBX01', Mounted, 0, 0, Crawling, ''
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="CI Troubleshooter" />
<EventID Qualifiers="0">5603</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-26T13:18:32.000000000Z" />
<EventRecordID>352746</EventRecordID>
<Channel>Application</Channel>
<Computer>MBX02.com</Computer>
<Security />
</System>
<EventData>
<Data>Reseeding failed for the content index catalog of mailbox database MAILDB8. Reason: System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3111\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies")). Database
copy states: Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAILDB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAILDB8\MBX01', Mounted, 0, 0, Crawling, ''
</Data>
<Data>MAILDB8</Data>
<Data>System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3111\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies"))</Data>
<Data>Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAILDB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAILDB8\MBX01', Mounted, 0, 0, Crawling, ''
</Data>
</EventData>
</Event>
So basically, MBX01 currently is hosting both databases. Obviously I want to move DB8 back to it's original server. It's been stuck on crawling for about 14 hours now. The database is about 1TB. Any advice on how to resolve this issue?
ThanksSo I get this error:
Log Name: Application
Source: CI Troubleshooter
Date: 3/27/2015 12:18:31 PM
Event ID: 5301
Task Category: (1)
Level: Warning
Keywords: Classic
User: N/A
Computer: MBX02.com
Description:
Detected catalog corruption for database MAIL DB8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="CI Troubleshooter" />
<EventID Qualifiers="0">5301</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-27T17:18:31.000000000Z" />
<EventRecordID>353063</EventRecordID>
<Channel>Application</Channel>
<Computer>MBX02.com</Computer>
<Security />
</System>
<EventData>
<Data>Detected catalog corruption for database RB MAIL DB8</Data>
<Data>MAIL DB8</Data>
</EventData>
</Event>
Log Name: Application
Source: CI Troubleshooter
Date: 3/27/2015 12:18:31 PM
Event ID: 5603
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: MBX02.com
Description:
Reseeding failed for the content index catalog of mailbox database MAIL DB8. Reason: System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3112\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies")). Database copy states:
Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAIL DB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAIL DB8\MBX01', Mounted, 0, 0, Crawling, ''
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="CI Troubleshooter" />
<EventID Qualifiers="0">5603</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-27T17:18:31.000000000Z" />
<EventRecordID>353066</EventRecordID>
<Channel>Application</Channel>
<Computer>MBX02.om</Computer>
<Security />
</System>
<EventData>
<Data>Reseeding failed for the content index catalog of mailbox database MAIL DB8. Reason: System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3112\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies")). Database
copy states: Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAIL DB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAIL DB8\MBX01', Mounted, 0, 0, Crawling, ''
</Data>
<Data>MAIL DB8</Data>
<Data>System.InvalidOperationException: Cannot reseed a catalog that does not have any healthy copies
At C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 3112\537\CITSLibrary.ps1:2585 char:26
+ throw <<<< (new-object -typename System.InvalidOperationException("Cannot reseed a catalog that does not have any healthy copies"))</Data>
<Data>Name, Status, ReplayQueueLength, CopyQueueLength, ContentIndexState, ContentIndexErrorMessage
'MAIL DB8\MBX02', Healthy, 1, 0, Crawling, ''
'MAIL DB8\MBX01', Mounted, 0, 0, Crawling, ''
</Data>
</EventData>
</Event>
This is with me running the ResetSearchIndex script. -
Action with Move command fails after illustrator restarts
Make new illustrator file
Make a Rectangle
Make a new action
While recording action press enter, and move any direction
Stop recording
Run action again to test
Close Illustrator
Open Illustrator
Try and use action
Fails and gives error "The object 'Move' is not currently available, the action button turns orange.
It also fails in button mode
It fails if I try to reload the actions
It only works if I recreate them in that session illustrator is open.
Expected Behavior
Actions work no matter how many times you restart illustratorSorry about not being very clear originally. We don't actually send remote notices to the target machines via ARD. The command
osascript -e 'tell application "System Events" to display dialog "Message"'
is just an example of what ARD is having issues with for me: If the script for the target machine pushes any user-facing GUI at all, it will not quit until someone manually OKs or closes the window... no amount of messing with the command by giving it ampersands or starting subshells prevents ARD from minding every single one of the subprocesses that it has started.
There are posts here where we see that a certain task never even "ends" in ARD's eyes: the scripted reboot
A colleague has suggested that we update our application to echo command information instead of triggering an "Everything was OK" dialog. Most of the time this will fail because you do not have access to the source code in the real world. In my case, we do, but making the changes requires reviewing, changing the code and new testing for the triggered application.
Still, there is a flaw in not having an option for ARD to just hit-and-run with a script to, say, open a presentation in 100 computers and leave it running. Currently, ARD will hit a few and hang on "Running" as soon as its whatever maximum parallel workstations is stuck running this script.
ARD designers seem to have planned it "we must receive the return value of this open-ended script," while clients see it as "please let us treat the job as finished as soon as the last line has been triggered" -
My attempts to export my sequence in mov format using compressor keep failing. I am getting an error in the log that reads, "Failed to create movie markers." I can't figure out what is going wrong.
Any ideas??Thanks for your input. I think the main issue is that i originally captured the video using another peice of software. These files were 1440x1080 so i was getting 'letter boxing' on the left and right. After doing a lot of reading, i now understand the importance of selecting the correct project setting
Leading on from this, I'm about to do some more filming and have hired a HDV camcorder (Sony HVR 27p - PAL). It's 1080i and can film in interlaced (25 or 50fps) or progressive. (25fps)
My questions are:
The required output playback file (mov file format) needs to be progressive. Should i film in progressive as well, or stick with interlaced and change the output settings when creating the output file?
If i stick with interlaced, do i film in 50 or 25 as the output file needs to be 25fps?
Although the camera captures 16:9, the pixels are 1440x1080 (which by all accounts in usual with HDV cameras.) Do i select a project setting whose setup is 1440x1080 or do i use 1720x1080?
Thanks a lot for your help so far.
Rob -
I can find nothing searching online. Trying to move the last user mailbox from one server to another, but it fails with this error. I have checked all mailboxes for the same GUID but can't locate it anywhere. Anybody have some suggestions?
Does anyone know if there is a way to perform a search based on mailbox GUID? Maybe I could find all objects with the same and it could lead me in the right direction.
Hi,
To find the object that belongs to a GUID, you can refer to this blog.
http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Exchange 2010 move request failed with MapiExceptionCallFailed
hi
Attempting a local move request of Mailbox but it fails.
plz help
Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x48A
Lid: 31329
Lid: 21921 StoreEc: 0x48A
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 4559 StoreEc: 0x48A
Lid: 21802
Lid: 19994 StoreEc: 0x48A
Lid: 20202
Lid: 3305 StoreEc: 0x48A
Lid: 32762 dwParam: 0x3FE70003
Lid: 32762 dwParam: 0x361384B0
Lid: 32762 dwParam: 0x36170003
Lid: 32762 dwParam: 0x36DA0102
Lid: 32762 dwParam: 0x36E00102
Lid: 32762 dwParam: 0x3FD60040
Lid: 32762 dwParam: 0x3FE4000B
Lid: 32762 dwParam: 0x67590102
Lid: 32762 dwParam: 0x675A0102
Lid: 32762 dwParam: 0x30080040
Lid: 32762 dwParam: 0x675C0102
Lid: 32762 dwParam: 0x65E30102
Lid: 32762 dwParam: 0x67510003
Lid: 32762 dwParam: 0x672D0003
Lid: 32762 dwParam: 0x673384B0
Lid: 32762 dwParam: 0x673284B0
Lid: 26346
Lid: 4073 StoreEc: 0x48A
Lid: 28570 StoreEc: 0x48A
Lid: 29738
Lid: 3401 StoreEc: 0x48A
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x48A
Lid: 22630
Context:
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2362
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
OpCode: TransferBuffer
DataLength: 2362
Any ideas? any help much appreciatedWhat version of Exchange 2010? SP2, RU #? I saw this support article form MS for 2003 --> 2010
http://support.microsoft.com/kb/2579051. Not sure if it is applicable. It could be you need to go to RU4 for SP2 Exchange 2010. Do not install RU5 as there were issues.
I've also run into several support articles about ACLs on the mailbox or fiolders:
http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
Let me know if I can provide any additional help.
JAUCG -
We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciatedThanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job. -
Joomla on Azure - receive http 302 - domain temporary moved - custom domain configured
hello,
i have Joomla running on Azure websites and use the mode "Shared" because i need the custom Domain.
dns lookup is fine and works perfect but when i browse
www.mydomain.de i receive from webserver: mydomain.azurewebsites.net.
I've check with netmon:
1. browser send: GET www.mydomain.de
receive a first http answer with: StatusCode: 302, Moved temporarily -> Location:
http://mydomain.azurewebsites.net/
Any idea how i can disable the temopory move stuff?
regards
PatrickHi Patrick,
Do you try to access your website now? Could your access your "http://mydomain.azurewebsites.net/" in your browser?
I have two confused points:
1.Did your set your Azure website default page?
2. Domain name need 12 hours propagation, Does it work now?
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Workflow - Move files fails with Something went wrong error.
I am trying to create a work flow on a list that holds documents. The workflow checks for a column value to be equal to the string "Awarded". If the condition is true the file is moved from one library to another. This works fine.
However when I try to run the workflow on a folder in the list I am greeted with a dialog box that says something went wrong.
Checking the ULS reader logs I did find an associated error that reads VALUE DOES NOT FALL WITHIN EXPECTED RANGE.
I guess in a nutshell that means it cant find what it is looking for.
So to recap, the workflow will run with individual files in the list who's attribute is set to awarded in a text colum. IT will not run on the same list on folders in the list. I need to have the ability to move entire folders from one library to another
based on that condition. Any ideas why this fails?
fr0stsp1reHi,
As per my understanding you want to run the workflow when you add a folder, for that you can see below link.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/daf59d7f-1073-4186-a807-29dcbd83b3c5/upload-a-document-using-webservices-without-changing-its-modification-and-creation-dates?forum=sharepointdevelopmentlegacy
Regards,
MS
Hi Thanks,
Actually I am simply trying to copy an entire folder full of files from one library to another. Works fine with single files but does not seem to work when trying to copy a folder.
fr0stsp1re -
Some Mailbox Moves Keep Failing
Trying to perform mailbox moves from Exchange 2010 to Exchange 2013 environment. Both are up to the latest CU and Service Pack. Most moves finish successfully. I have a couple so far that transfer data for some time then fail with the following error.
Error: MapiExceptionTooBig: IExchangeFastTransferEx.SetPerUser failed
I have attempted the moves a couple times, even adding the AllowLargeItems switch. I have tried through ecp and powershell using both New-MoveRequest and New-MigrationBatch cmdlets.
Any ideas?Thanks again for responding. I really appreciate the help.
I combined a few of the suggestions...I moved one of the mailboxes in question to another 2010 DB with no issue, I increased the BadItemLimit and due to the fact that inheritance was already checked I ran -ApplyMandatoryProperties (I stopped there to
see the results). The mailbox is still moving (as it takes a really, really long time) and my assumption is that it will still fail. I wanted to provide and update as to the status.
This time though, I ran get-MoveRequestStatistics <mailbox> -IncludeReport and what I saw was the following:
Status: InProgress
StatusDetail: Transient failure
Then the log loops through the same failure over and over again. It gets to a point where "FinalIncrementalSync" is 95% complete and then I receive the "Transient error MapiExceptionTooBig has occurred." As mentioned, it just keeps retrying
this same process as indicated in the log.
5/15/2014 4:24:44 PM [servername] The Microsoft Exchange Mailbox Replication
service 'serverfqdn'(15.0.847.31
caps:03FF) is examining the
request.
5/15/2014 4:24:44
PM [servername] Connected to target mailbox 'Primary
(mbxguid)', database
'DB29', Mailbox server
'serverfqdn' Version
15.0 (Build 847.0).
5/15/2014 4:24:44
PM [servername] Connected to source mailbox 'Primary
(mbxguid)', database
'DB003', Mailbox server
'2010mbxfqdn' Version
14.3 (Build 158.0).
5/15/2014 4:24:44
PM [servername] Request processing continued, stage
IncrementalSync.
5/15/2014 4:24:45
PM [servername] Folder hierarchy changes reported in source
'Primary (mbxguid)':
1 changed folders, 0
deleted folders.
5/15/2014 4:24:45
PM [servername] Incremental Sync 'Primary
(mbxguid)' completed:
1 hierarchy updates, 0
changed messages.
5/15/2014 4:24:45
PM [servername] Stage: IncrementalSync. Percent complete:
95.
5/15/2014 4:24:45
PM [servername] Final sync has started.
5/15/2014 4:24:46
PM [servername] Folder hierarchy changes reported in source
'Primary (mbxguid)':
0 changed folders, 1
deleted folders.
5/15/2014 4:24:46
PM [servername] Incremental Sync 'Primary
(mbxguid)' completed:
1 hierarchy updates, 0
changed messages.
5/15/2014 4:24:46
PM [servername] Source mailbox information:
Regular Items: 23857,
938.8 MB (984,358,213 bytes)
Regular Deleted
Items: 11786, 174.1 MB (182,595,699 bytes)
FAI Items: 351,
0 B (0 bytes)
FAI Deleted Items:
0, 0 B (0 bytes)
5/15/2014 4:24:46
PM [servername] Stage: FinalIncrementalSync. Percent
complete: 95.
5/15/2014 4:24:47
PM [servername] Transient error MapiExceptionTooBig has
occurred. The system
will retry (1/60). -
IMovie movie imports fail to show
I have a bunch of GoPro .mp4 movies which I want to edit in iMovie. If I import one of them, it appears in the correct event and I can use it in a project. If I import several of them at once (and leave iMovie to get on with it) they fail to appear in the expected event. The weird thing is, if I "reveal in finder" I can see all the movies I wanted to import in the correct iMovie events folder, but they don't appear as thumbnailed videos in the event browser within iMovie. I've tried a few times and this happens each time; they are copied to the correct folder but don't appear in iMovie.
Why? Or more usefully, how do I fix it?iI move the folder into trash, empty the trash, 'bingo' the file reappears in its original location (in the events library)... Thanks all the same, I would like to find a better way of deleting folders and files.
The idea here is to force iMovie '08 to re-thumbnail/cache the source files (which are not trashed) the next time the application opens. In cases where the supporting thumbnail/cache file was created with corruptions, this work flow often works by creating uncorrupted files which then display properly in the iMovie '08 Event Window. Basically, iMovie '08 scans all Event Folders each time the application starts up. If it finds any files are missing, it re-creates them automatically and hopefully gets them right the second time around. If it doesn't, then you can always fall back on trying to re-import the original files from the camcorder. -
Premiere expor mov show failed
the premiere export "quicktime" set the relevant parameters, queues, adobe media encoder to start output when the show failed;
The premiere "quicktime" export set the relevant parameters, export, pop-up dialog box "compiled Videos error can not create or open the output file"
Software version: premiere cs 5.5
quicktime 7.7.3 (registered as Professional Edition)Welcome to the forum.
Could you please read over this FAQ Entry, and provide the info requested in it? http://forums.adobe.com/thread/961741?tstart=0
Also, for Error Compiling Movie error messages, this article might be helpful: http://forums.adobe.com/message/4172254#4172254
Good luck,
Hunt -
Hi all
I have rented three movies from my iPad mini thinking to watch while traveling. Actually watched just one and two others left for some while.. Week or two.
These two was not opened even once and i presume i could start to watch during month or so. But today decided to watch one it failed to start. I tried second - same. Moreover, first i watched while travel did non disappeared as usual and not starting too with same failure message - couldn't be open.
In iTunes app i see movies are rented and button to play, press it ...switchover to Movies app and same failure.
Sure i can rent once again, not killing money...but who can guaranty it will not happen again?
Could you give any advice?
Thanks
AndreyHi anfedoro,
The article below will provide an overview of the Movie rental process:
iTunes Store: Movie rental frequently asked questions (FAQ)
iTunes Store: Movie rental usage rights in the United States
If you are having issues with your purchase, follow the steps below:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
I hope this information helps ....
Have a great day!
- Judy -
MSCS "Move Group" fails initially then works
I have the odd behavior that when I attempt to move my SAP cluster group one or both of my instances fails to move and drags the entire group back.
After failing on the first couple attempts the group moves fine and from that point on it moves back and forth without a problem.
I randomly see this behavior on all my SAP cluster installs that are ABAP+JAVA and wonder if anyone else has experience this.Bill,
I have also experienced this in our dual stack. I think if there is a delay in the cluster drive fail over the central instance and central services will not start up because it cannot find the profiles. But if you have figured out and want to share your experience, please do so.
Raj
Maybe you are looking for
-
I have a Mac Book Pro from 2009. I have an adapter to connect to the TV, but how to get the sound from TV as well? I heard this works only for MaxBooks from 2010, but is there a possibility for older ones as well? Thanks for your answers.
-
IOS Developer Program - Enrollment In Review
My Apple Developer Connection application for my business has been stuck in the "Enrollment In Review" stage for a month now. I've faxed over all required info, have called and emailed a few times, but get no reply over email and on the phone no one
-
2 facts and 1 dimension design in RPD
Hi All, Approach 1: I have a Fact which I am creating as a dimension and there is another fact which is joined to the same dimension. The same process I am following in BMM layer and trying to work by setting content level. But when I am dragging col
-
Adobe Creative Suite 3 Design Standard compatible with MAC OS 10.10.2?
I have the Adobe Creative Suite 3 Design Standard, but when I need to print from Adobe illustrator CS3 it will popup the following error Anyone can help?
-
OES2 SP1 on linux iPrint issues - PCL errors.
Hi, I've created an iPrint printer for a HP Laserjet 3005 on OES2 SP1 (linux), but I have a few printing issues. When I use PCL6 drivers all I get is a PCL XL error (IllegalOperatorSequence), and when I use PCL5e drivers, whatever it prints is missin