Sip calls to cmr through vcse not found

I can make inbound calls as h323 to a cmr but sip fails with far end not found.

I tried some different searches including the .* but no diff.
I did turn UDP back on and it worked. Still will not working with SIP, TCP or TLS.
I am revisiting the ports and certificates to see if there is anything there. I have for the most part left the port ranges as they were originally as the release notes never insisted on a change and that the old range should be ok.

Similar Messages

Call Library Function Node: library not found or failed to load

Hello,
I had a VI that could not find some of the dll functions it needed. It works on one machine and not on another. So foolishly I copied the dll in question from the working machine and pasted it over the one on the non-working machine.
Now all my math functions are broken on the machine I copied the dll too. The error is "Call Library Function Node: library not found or failed to load"
And if I try to relink in the VI I get "Error loading C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll" A dynamic link library (DLL) initialization routine failed."
I tried a repair labview and that did not help.
I tried uninstall and reinstall labview and that did not help!
Please help me fix this!
Version 8.2
dll: C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll
Jim

What library did you first copy?
Also lvanlys.dll depends on the Intel Math Kernel Library that gets installed in a different location "C:\Program Files\National Instruments\Shared\MKL".
This Intel Math Kernel Library again depends on the Visual C runtime libraries. Most likely you replaced one of those runtime libraries somehow and now the Math Kernel Library (MKL) fails to initialize which causes thelvanlys.dll to fail its load.
Without a good view on your system and what other NI software you have installed it is very hard to recommend a good way of proceeding. There are various versions of the MKL used by various versions of NI products and just deleting the entire MKL folder might get you into trouble with other NI tools.
Deinstalling everything from NI, deleting the entire National Instruments folder and then reinstalling what you need would be the most safe proceeding.
And next time don't just copy some Visual C runtime libraries between machines. Their dependencies are complicated at the least and simply not graspable by us mere mortals. Use the according C runtime installer for the version you need as that installer will take care of installing the right versions of C runtime components and registering everything proberly so you do not usually run into problems with other applications using different versions of the C runtime.
Message Edited by rolfk on 03-01-2010 10:26 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Call library function node: function not found in library

I'm using Labview 6.1 and Windows XP. I am trying to open some code, but it opens up with a broken arrow. The error is Call Library Function Node:function not found in library. Tried to configure the node, but no change. Moved the DLLs to various directories (keeping them together) but again no change.
This code has been compiled and is working fine. I'm just trying to run the source code to make some modifications. Any suggestions?
Thanks
CarlosV

Thanks for the suggestions. Tried it but had the same results. The library I'm using is hpe1413_32.dll.
One thing I forgot to mention....doing a configure on the node, it comes up with the library: hpvscp32.dll and the function: hpe1413_error_message
The function doesn't exist in the library. So I set the path to hpe1413_32.dll which does contain the function.
After closing the configuration window and opening it up again, the library shown is hpvscp32.dll
From what I can tell, there are three libraries involved:hpe1413_32.dll, hpe141332v.dll, and hpvscp32.dll
Thanks again.
Carlos

Call library function node - function not found

When creating a DLL I get a the Labview error "Call Library Function Node "LabviewReceiverDLL.dll:readDataJ1939Data' Function not found. Everything looks correct to me and this used to work, though I've changed computers since then.
This is the beginning of my C++ code just to show my function name. I've also attached the Call Library Function Window to show my setup.
Thank you in advance for your help.
#include"StdAfx.h"
#include<iostream>
/* Call Library source file */
extern"C"__declspec(dllexport)unsignedint readDataJ1939Data(unsignedint, unsignedint, unsignedchar, unsignedchar* canData, unsignedchar* path);
unsigned int readDataJ1939Data(unsignedint ulTimeStamp, unsignedint ulIdentifier, unsignedchar uiDataCount, unsigned char* canData, constchar* path)
Solved!
Go to Solution.
Attachments:
Call Library Function.png ‏192 KB

You mention that you have changed computers and that it used to work before.
Could it be that there is another (older) copy of the DLL on this computer, and LabVIEW is loading the wrong one?
The simplest way to check is to close your VI and delete the one you are expecting it to use. Then open the VI again; if LabVIEW doesn't ask you where the DLL is, it is loading it from somewhere else.
Batya

Calling EJBs across ears - HomeObject not found

I have this situation:
- BeanA is a stateless session bean and packaged in mod1.ear. mod1.ear also has
a jar file which contains BeanB's home and remote interface. In mod1.ear's application.xml,
I have mentioned the BeanA's jar and BeanB's client jar containing only the home
and remote interfaces of BeanB. BeanB's client jar is marked as a java module
in mod1.ear's application.xml file.
- BeanB is also a stateless session bean and packaged in mod2.ear.
- BeanA does a lookup for BeanB and then calls a business method of BeanB.
The issue:
- When BeanA does a lookup, I get an exception saying BeanBHome is not found.
Basically I think it is an issue with the classloader. BeanA is not getting BeanB's
home. I did a hack by adding BeanB's client jar in the classpath of startServer.cmd.
It works, but I think it is not a clean way.
Can someone let me know what the right solution is?
Thanks,
Abbas

Hello Abbas,
Please provide your manifest classpath entries and any other files/information
that may be necessary to detect the problem. Also, for more information about
WebLogic classoading mechanisms, if you haven't done so please read http://dev2dev.bea.com/articles/musser.jsp.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Abbas" <[email protected]> wrote:
>
Rob:
I included the BeanB's ejb-client.jar entry in the manifest file of BeanA's
ejb-jar.
However, it doesn't work. I think Weblogic should load BeanA's jar and
BeanB's
ejb-client jar with the same classloader. I couldn't figure out why BeanA
couldn't
locate the home interface. If I copy the BeanB's class files into BeanA's
jar,
obviously it works. But that wouldn't be a clean way to work.
I have replicated the scenario with 2 sample beans. I can upload them
if you or
someone can let me know if I am missing something.
Thanks,
Abbas
Rob Woollen <[email protected]> wrote:
Abbas wrote:
I have this situation:
- BeanA is a stateless session bean and packaged in mod1.ear. mod1.earalso has
a jar file which contains BeanB's home and remote interface. In mod1.ear'sapplication.xml,
I have mentioned the BeanA's jar and BeanB's client jar containingonly the home
and remote interfaces of BeanB.Ok
BeanB's client jar is marked as a java module
in mod1.ear's application.xml file.No, remove that.
In beanA's ejb-jar file add a manifest class-path entry that references
beanB's ejb-client-jar.
-- Rob
- BeanB is also a stateless session bean and packaged in mod2.ear.
- BeanA does a lookup for BeanB and then calls a business method ofBeanB.
The issue:
- When BeanA does a lookup, I get an exception saying BeanBHome isnot found.
Basically I think it is an issue with the classloader. BeanA is notgetting BeanB's
home. I did a hack by adding BeanB's client jar in the classpath ofstartServer.cmd.
It works, but I think it is not a clean way.
Can someone let me know what the right solution is?
Thanks,
Abbas

DIO Port Config & DIO Port Write Block Diagram Errors (Call Library Function Node:library not found or failed to load)

Hi Guys, need help on this.
I have this LabVIEW program that used to work on the old computer.
The old computer crashes most of the time, so I upgraded the computer
and used its Hard Drive as slave to the new computer.
I have no idea where are its installers since the guy that made the program
is not in my department anymore.
I downloaded all the drivers needed from NI: NIDAQ9.0, NIVISA,NI488.2,
and drivers of some instruments needed in the setup. I'm using LabVIEW8.2.
Everything's fine until I open the LabVIEW program for our testing.
Here goes the error:
   DIO Port Config
   DIO Port Write
Block Diagram Errors
   Call Library Function Node: library not found or failed to load
Attachments:
ErrorList.JPG ‏200 KB

Honestly, I'm a newbie on Labview. I just want this old program to run on the new computer.
The guys that installed the drivers on the old computer are no longer here in my department.
And I have no idea where the drivers are. So I just downloaded the drivers needed for my hardware and instruments.
Here's my hardware: (cards: PCI-DIO-96, PCI-GPIB), (instruments: SCB100,E4407B, HP83623, HP3458, HP8657)
OS: Windows XP Pro
By the way, I have unzipped the TraditionalDAQ drivers. First I tried the 7.4.1, but installation error appeared.
I thought maybe the installer is corrupted, so I downloaded the 7.4.4 and unzipped it.
But, still same installation error appears. I don't understand, both TraditionalDAQ drivers have same installation error.
Now I have tried the DAQmx8.7.2 driver, bu still the DIO Port Config and DIO Port Write have errors.

ICompanyService.GetGeneralService(System.String) Method Not found error

Hi,
When I am running my code in SAP 2007, I am getting following on calling of UDO.
Method not found: 'SAPbobsCOM.GeneralService SAPbobsCOM.ICompanyService.GetGeneralService(System.String)'
I could not understand why this error is occuring, although same code in running very well in SAP 8.8 and 8.81.
Please suggest me a solutions.

Hi
sorry it is mistake from me. Check this SAP note regarding GeneralService it is available from SAP Business One 2007 A SP00 PL46 onwards . Please check you PL version
How to use the GeneralService functionality to access UDOs via DI API.
Solution
The GeneralService allows access to User-Defined Objects (UDOs) via the DI API. Using the GeneralService, you can add, update and delete UDOs. This feature was added in SAP Business One 2007 A SP00 PL46.
The following is an example of how to add data to a UDO. This example relates to a UDO with the following properties:
Type = Document
Unique ID = "Ex_1"
Name = "EX_DOC"
User-Defined Field = "Field1"
Child Object Name = "EX_DOC_LINE"
User-Defined Field (Child Object) = "Property1"
Use this (VB.NET) code to add data to the UDO:
           Dim oGeneralService As SAPbobsCOM.GeneralService
           Dim oGeneralData As SAPbobsCOM.GeneralData
           Dim oGeneralDataChild As SAPbobsCOM.GeneralData
             'Get the UDO by referencing the Unique ID (using the CompanyService Object)
           oGeneralService = oCompanyService. GetGeneralService("EX_1")
                     'Create data for new row in UDO - (Document Table)
           oGeneralData = oGeneralService.GetDataInterface(SAPbobsCOM. GeneralServiceDataInterfaces.gsGeneralData)
           oGeneralData.SetProperty("U_Field1", "A")
           'Create data for new row in the UDO Child - (Document Row Table)
      oGeneralDataChild = oGeneralData.Child("EX_DOC_LINE"). Add()
           oGeneralDataChild.SetProperty("U_Property1", "B")
           oGeneralService.Add(oGeneralData)
See the following Blog for more information and another example:
           "UDO Access via DI API (in PL46)"
           http://www.sdn.sap. com/irj/scn/weblogs?blog=/pub/wlg/13008
Regards
Arun

SetID not found for name='BUSINESS_UNIT', value='' with record 'BI_DISC_SUR

Hi
While entering identifier in Discount/Sub charge page it giving following error:
SetID not found for name='BUSINESS_UNIT', value='' with record 'BI_DISC_SUR', tree ''. (2,214) FUNCLIB_CA.RENEWAL.FieldFormula Name:SelectDiscountSurcharge PCPC:12887 Statement:186
Called from:CA_RNW_CYCLE_PNG.GBL.CA_RNW_LN_REDUC.DISC_SUR_ID.FieldChange Statement:9
The PeopleCode built-in function GetSetID has been called with parameters that were
not found in the table set definitions.
Review the table set control tables and the PeopleCode and correct whichever is wrong.
Please help me to solve this issue.
Thanks
Mani

did you check if your business unit (setcontrolvalue) is setup with record group BI_04, and it has a default setid associated.

File Not Found when calling a Servlet in Portal

We've developed a JSP/servlet application within JDeveloper 9.0.3 also using the Portal add-in.
Upon submission of form within the JSP, a servlet is called using a url based servlet mapping. Everything works great in Jdeveloper, but once we deploy to the app server through OEM and try to submit the form on the JSP (through a basic submit button), we get a 404 File Not Found error.
All of the code is set up in the basic j2ee structure. (I think) DrugInter is the name of the provider and the application.
applications/DrugInter/DrugInter/WEB-INF/classes/src/com/whatever/ServletName.class
Our web.xml has the correct servlet name and mapping to this servlet. I'm assuming this is the case only because everything works fine within JDev.
Any ideas?
Thanks!
Teri Kemple

I think I found the problem. I am using Illustrator CS5 (15.0.02) running on MacOS (10.7.5).
In my script, Folder.selectDialog function was returning "file:///Users/alex/Apps/temp", when I selected the temp folder from the dialog box. I want the function to return "/Users/alex/Apps/temp". If I hardcode the path (as shown below), the javascript runs fine.
// Select the source folder.
//sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files', '~' );
sourceFolder = Folder("/Users/alex/Apps/temp");

File Not found error when calling Form Post Method to a JSP from JSP Portlet

I have built a set of JSP forms using post method to call other JSPs. Normally, the code looks like
<form name="MyForm" action="MyJsp.jsp" method="post">
I migrated the calling form containing this code to a portlet, but not the MyJsp.jsp. When I submit the form, I get a file not found in Jserv.log
Exception:javax.servlet.ServletException: java.io.FileNotFoundException: D:\servlet\RegisterCompany.jsp (The system cannot find the file specified)
[14/06/2001 13:59:59:679 PDT] JspServlet: unable to dispatch to requested page: Exception:javax.servlet.ServletException: java.io.FileNotFoundException: d:\oracle\isuites\apache\apache\MyJsp.jsp (The system cannot find the file specified)
I notice that launching the calling jsp from a portlet, my opriginal context that uses ../Apache/Apache/htdocs is not being searched for the JSp. Why is this? Moreover, I try to set up an Alias in httpd.conf file to the this director and use it with the jsp in the action tag, but still get an error that my jsp servlets/Myjsp can't be found. Why is it insiting on looking at servlets context instead of htdocs.
I have none of these issues outside of Portal30 using IAS.
regard

Initially, I couldn't do this unless I moved tghe jsp's up to the root directory of IAS, i.e ../Apache/Apache. Nomrally, htdocs is my doc directory for IAS. I could not do http:\\myUrl\htdocs\myJsp. If I tgried this, I got an error in Apache error logg that said can't find file ..\htdocs\htdocs\MyJsp.jsp.
If I just tried the the URL http:\\myUrl\MyJsp.jsp with Jsp file in htdocs, I would get an error in the Jserve log that file d:\oracle\isuites\apache\apache\MyJsp.jsp could not be found. Once I moved the file MyJsp to Apache/Apache directory, it could be found using http:\\myUrl\MyJsp.jsp. Later, I delted these files and kept the ones in htdocs and they continued to work.
I'm confused why launching pages through portal isn't consistant with Apache Standards. Where is the documentation that tells me how to configure context and aliases for pages launched from portal pages?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sue Vickers ([email protected]):
David,
Passing information using Portal is different than just using Apache/Jserv. Does it work in portal if you use the absolute path?
<form name="MyForm" action="http://host.domain/MyJSP.jsp" method="post">
Portal will not be on the same relative path as your Apache, so you may need to adjust your action somehow.
Thanks,
Sue<HR></BLOCKQUOTE>
null

Column Not found error while trying to access databse through JSP+Java Bean

I am trying to acees MS Access 2003 db through JSP using Tomcat 5.0.28.The code for accessing the databse is incorporated in the bean.The jsp only calls the particular method of the bean .
Code for Java Bean:
package ActiveViewer;
import java.sql.*;
import java.util.*;
public class CompanyBean
Connection con;
ResultSet rs=null;
Statement st;
     public CompanyBean(){}
     public void connect()
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Here4");
con=DriverManager.getConnection("jdbc:odbc:activeviewer","","");
     System.out.println("Here1");
     catch (ClassNotFoundException e)
     System.out.println("Could not locate driver.");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
     catch (Exception e)
System.out.println("An unknown Exception has occured :: "+e);
     e.printStackTrace();
public void disconnect()
     try
     if (con!=null)
con.close();
     catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
public ResultSet select(String username)
if(con!=null)
     try
st=con.createStatement();
     rs=st.executeQuery("select * from company where username='" + username + "'");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
     e.printStackTrace();
catch (Exception e)
System.out.println("An Exception has occured while retrieving :: "+e);
e.printStackTrace();
else
System.out.println("Connection to database was lost.");
return rs;
The code for JSP that uses the above bean is:
<%@ page language="java" import="java.sql.*,ActiveViewer.* " contentType="text/html"%>
<jsp:useBean id="conn" scope="session" class="ActiveViewer.CompanyBean" />
<html>
<body>
<% String username=request.getParameter("username");
String password=request.getParameter("password");
System.out.println("username:"+username);
System.out.println("password:"+password);
conn.connect();
ResultSet rs=conn.select(username);
System.out.println("Below select ");
while (rs.next())
String dbusername=rs.getString("username");
     String dbpassword=rs.getString("password");
     if(dbusername.equals(username) && dbpassword.equals (password))
{ %> out.println("OK");
          <% }
else { %>Invalid Username and / or Password.
<br>Clickhere to go back to Login Page.
<% }
} %>
</body>
</html>
I get the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Column not found
though the database is not int he same folder as the jsp, the DSN is set correctly to pint to the db location.The jsp does print in stdout file:
Here4 (from connect method above)
Here 1 (from connect method above)
Below Select (from jsp)
This means that the jsp does connect to db but it gives the above error.Also the field name also matches that in the database and data is present in the db too.
All other things like creating package for bean,incorporating the packakage are done.
Can someone please help me with their precious advice?

U're getting this error because there is no field called 'password' in ur database, the field in ur database is named 'cpassword' and not 'password'. So change the statement rs.getString("password"); to rs.getString("cpassword");

Column Not found error while trying to access database through JSP+Java Bea

I am trying to access MS Access 2003 db through JSP using Tomcat 5.0.28.The code for accessing the database is incorporated in the bean.The JSP only calls the particular method of the bean .
Code for Java Bean:
package ActiveViewer;
import java.sql.*;
import java.util.*;
public class CompanyBean
Connection con;
ResultSet rs=null;
Statement st;
public CompanyBean(){}
public void connect()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Here4");
con=DriverManager.getConnection("jdbc:odbc:activeviewer","","");
System.out.println("Here1");
catch (ClassNotFoundException e)
System.out.println("Could not locate driver.");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An unknown Exception has occured :: "+e);
e.printStackTrace();
public void disconnect()
try
if (con!=null)
con.close();
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
public ResultSet select(String username)
if(con!=null)
try
st=con.createStatement();
rs=st.executeQuery("select * from company where username='" + username + "'");
catch (SQLException e)
System.out.println("An SQL Exception has occured :: "+e);
e.printStackTrace();
catch (Exception e)
System.out.println("An Exception has occured while retrieving :: "+e);
e.printStackTrace();
else
System.out.println("Connection to database was lost.");
return rs;
The code for JSP that uses the above bean is:
<%@ page language="java" import="java.sql.*,ActiveViewer.* " contentType="text/html"%>
<jsp:useBean id="conn" scope="session" class="ActiveViewer.CompanyBean" />
<html>
<body>
<% String username=request.getParameter("username");
String password=request.getParameter("password");
System.out.println("username:"+username);
System.out.println("password:"+password);
conn.connect();
ResultSet rs=conn.select(username);
System.out.println("Below select ");
while (rs.next())
String dbusername=rs.getString("username");
String dbpassword=rs.getString("password");
if(dbusername.equals(username) && dbpassword.equals (password))
{ %> out.println("OK");
<% }
else { %>Invalid Username and / or Password.
<br>Clickhere to go back to Login Page.
<% }
} %>
</body>
</html>
I get the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Column not found
though the database is not int he same folder as the jsp, the DSN is set correctly to pint to the db location.The jsp does print in stdout file:
Here4 (from connect method above)
Here 1 (from connect method above)
Below Select (from jsp)
This means that the jsp does connect to db but it gives the above error.Also the field name also matches that in the database and data is present in the db too.
All other things like creating package for bean in WEB-INF/classes,incorporating the packakage are done.
Can someone please help me with their precious advice?

Hi, I too have a problem with an SQL exception, the message is Column not found.
I'm using the sun jdbc odbc driver with access.
the first few lines of the stack trace are
sun.jdbc.odbc.JdbcOdbcResultSet.findColumn(JdbcOdbcResultSet.java:1852)
sun.jdbc.odbc.JdbcOdbcResultSet.getInt(JdbcOdbcResultSet.java:603)
net.homeip.sdaniels.MemberBean.ejbFindByUnamePwd(MemberBean.java:127)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
I am of course sure that the column does infact exist. I can insert into the column no problems. the sql looks like this:
SELECT * FROM Members WHERE uName ='Stewart' AND encPwd='�F2C�3��h�1Y�'
Can any one tell me if there is a common cause to this problem?
Thanks

404 not found when trying to make outbound calls

Hi.
Just got skype for business, incoming calls working fine but cannot get outbound to work.
Any ideas?
    Call-ID: YzUwYWZiNDRlMTc0NzhlNDlmYjExMmRjNWFmZDE3M2Q.
    CSeq: 1 INVITE
    Session-Expires: 1800
    Accept: application/sdp, message/sipfrag
    Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, NOTIFY, INFO, REFER, PRACK
    Content-Type: application/sdp
    Supported: replaces, histinfo, 100rel, timer
    User-Agent: TeleVoice Trio Enterprise 3.2 TE 3.2.79
    History-Info: <s
    v=0
    o=- ****************330 1 IN IP4 192.168.0.191
    s=-
    c=IN IP4
    t=0 0
    m=audio 53018 RTP/AVP 8 101 0
    a=rtpmap:8 pcma/8000
    a=rtpmap:101 telephone-event/8000
    a=rtpmap:0 pcmu/8000
    sigcomp id=
Resiprocate: (level=7)
    Adding message to tx buffer to: [ V4 UDP target domain= mFlowKey=0 ]
Resiprocate: (level=7)
    incoming from: [ V4 UDP target domain=unspecified mFlowKey=352 ]
Resiprocate: (level=
    CSeq: 1 INVITE
    Content-Length: 0
Resiprocate: (level=7)
    incoming from: [ V4 UDP target domain=unspecified mFlowKey=352 ]
Resiprocate: (level=
    CSeq: 1 INVITE
    Content-Length: 0
[edited for privacy]

can anyone over at Skype help, there seems to be no online chat support anymore, and I am a paying customer, very dissapointing!
I have Skype Connect (skype sip) setup for incoming calls and this has been working well for some time, but now i want to call out to skype users using the same account and I get both 407 and 404 errors, a redacted trace copied below:
|Time     | xx.xxx.xx.xxx                         |
|         |                   | 63.209.144.201    |
|0.000    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
|         |(5080)   ------------------> (5060)   |
|0.041    |         100 Trying|                   |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.184    |         407 Proxy Authentication Required          |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.184    |         ACK       |                   |SIP Request
|         |(5080)   ------------------> (5060)   |
|0.185    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
|         |(5080)   ------------------> (5060)   |
|0.225    |         100 Trying|                   |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.857    |         404 Not Found                 |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.857    |         ACK       |                   |SIP Request
|         |(5080)   ------------------> (5060)   |
the (redacted) gateway config in freeswitch is:
<include>
        <gateway name="skype">
        <param name="username" value="9xxxxxxxxxxxxx"/>
        <param name="realm" value="sip.skype.com"/>
         <param name="from-user" value="9xxxxxxxxxxxxx"/>
        <param name="from-domain" value="sip.skype.com"/>
        <param name="password" value="XXXXXXXXXXXXXX"/>
         <param name="extension" value="9xxxxxxxxxxxxx"/>
        <param name="proxy" value="sip.skype.com"/>
        
        <param name="register" value="true"/>

        <param name="register-transport" value="udp"/>

        <param name="retry-seconds" value="30"/>
        <param name="caller-id-in-from" value="false"/>
        <param name="contact-params" value="[email protected]"/>
        <param name="context" value="public"/>
      </gateway>
</include>
Can someone over at skype support assist? or anyone else who has experience with this?
The 404 appears to be the more serious error but not sure if the 407 is causing the 404 and needs to be cleared up first.
Thanks!

CMR JDEV9032 TABLE VIEW NOT FOUND

Hello,
I'm breaking my head on the following:
I created two entity beans (A and B). Both are CMP EJB's.
In EJB terms : A has the field (id, name), B also.
In the deployment descriptor I set a CMR relationship from A to many B's. This is just like the example of the EMP DEPT. The only difference is that there are no tables mappped yet of the EJB's A and B. They are to be generated at deployment time by the oc4j instance.
This goes correctly. The tables are created (no intermediate tables are created), direct foreign keys (I'm using oc4j 904 pre to do this).
So the idea is to work from EJB's and not to worry about the database.
Since I'm using a CMR (so local interfaces are used), I created a Session Facade, so that I can try to create entity (read records) through a sample client (generated by JDeveloper 9032).
I can create individual ejbs (==records), I see them in the database. But the moment I try to relate the objects (either by doing a B.setA(LocalA) on the B-entity or by adding to the collection A.getBees().add(LocalB)) it goes wrong.
None of these work. I get a table or view not found exception. This is strange, since I can see at deployment that two tables are generated, exaclty like I expected. But setting the relationship is very hard !!!!!!
My question is: who can help me on this ? I found some examples on otn.oracle.com, but they NEVER described the situation where you want to set the relationship.
Now I'm working for a customer and the deadline is reaching. JDeveloper 9032 is the developerplatform. The embedded OC4J shipped with JDeveloper has a bug (Datasource not closed), that's why I'm using the OC4J 904 pre, since the bug is fixed in this release. Of course a Oracle 9i database is used.
Hope to hear from you soon.

Dear Debu,
The only things I set in the orion-ejb-jar.xml is that datasource name and the table name. I can create instances of the A and B EJB's. Setting the relation between A and B seems to result in the message "Table or View not found".
Furthermore If I try to do:
(on Entity A).
(This code is declared in a SessionFacade EJB which is used to set the relation();
public void connect( Long idA, Long idB){
LocalA a = LocalAHome.findByPrimaryKey(new Long(idA));
LocalB b = LocalBHome.findByPrimaryKey(new Long(idB));
// now b is filled.
a.getBees().add(b); // Exception is thrown.
The Exception is an Illegal State Exception.
My Question is Why ?
Regards,
Rokesh Jankie

"1046: Type was not found" for a custom class calling a custom class

This should be easy... but I've spent two days on nothing but this error.... I am absolutely at my wit's end.
Basically, I've got a "character" container linked to a MovieClip in the library that is supposed to act as a container for various body parts; head, shirt, pants, etc. For simplicity, I've just got Character class and Head class, both in a "char" package, both classes are named the same as their respective files (Character.as and Head.as, both in an actual file called "char"). Character class is supposed to create an instance of Head, but I always get this 1046 error. The problem is that I've got other body parts with nearly identical classes that ARENT throwing a 1046 error and are working just fine. I went and made a new project to see if I was still having the problem with just character calling 1 simple body part. I do.
In the symbol properties, it's Exported for Actionscript & Export in Frame 1... the class is "char.Head" and "char.Character" respectively. I have tried everything I can find or think of, I've done dozens of Google searches and sifted through dozens of forums. I can't find anything and I've been working on this problem for 24 straight working hours now. I'm completely exasperated......
package char {
import flash.display.MovieClip;
import flash.display.Stage;
import flash.display.Sprite;
import flash.events.Event;
import flash.geom.ColorTransform;
import fl.motion.Color;
import char.Head;
public class Character extends MovieClip {
// 1046: Type was not found or was not a compile-time constant: Head
private var _head:Head;
// reference to get the stage later
private var stageRef:Stage;
public function Character(stageRef:Stage=null) {
trace("NEW CHARACTER");
//1180 Call to a possibly undefined method Head;
_head=new Head();
And here's the contents of Head.as
package char {
import flash.display.MovieClip;
import flash.events.Event;
import flash.display.Stage;
import flash.geom.ColorTransform;
public class Head extends MovieClip {
private var skin_type:uint;
public function Head() {
trace ("NEW HEAD");
Now if I declare the head variable and create a new instance of it in my document class, no problem whatsoever. If I do it in my Character class, it just doesn't stop giving me this error!!! Somebody please help me.
1046: Type was not found or was not a compile-time constant: Head
1180 Call to a possibly undefined method Head;

There is a blank movieclip named Character in the library, yup.
Also in my main handler for my document class calls "mainCharacter = new Character(); "
Here's a chunk of the code from the document class. For the record, it calls "head" as just a test and that works fine. Just doesn't work in "Character"
import char.Character;
import char.Head;
public class MainHandler extends MovieClip {
private static var _instance:MainHandler;
public static function get instance():MainHandler { return _instance; }
public var mainCharacter:Character;
public var head_:Head;
public function MainHandler() {
_instance = this;
mainCharacter = new Character();
head_=new Head();

Sip calls to cmr through vcse not found

Similar Messages

Maybe you are looking for