SIP Lync Issues - calls unable to connect
Hi,
For the last couple of weeks I have been unable to make any Lync SIP calls on my home BT Infinity package using HH5.
Calls simply will not connect. However if I swap the router out the calls connect correctly.
This was working before so can only presume that BT have 'changed something'.
Any ideas??
Hi Nokkyear. I have been having the same exact issue using my E51 since I got the phone two weeks ago. After plenty of stress and anger, I somehow got it to work just a few minutes ago.
In my case, I made the following change and was finally able to connect and make a test call:
1> Under Connections/SIP Settings, I changed the PUBLIC USERNAME to the full address (i.e. [email protected]). Previously I had the xxxx portion of the address.
I had also removed the appearances of the "sip:" prefix from the proxy address, the registrar address and the public username address. I would say that only after I did that, I was able to connect to my SIP server....HOWVEVER, upon review now as I write this post, I can see that the "sip:" prefix has returned to the entries.
Try this and see how it works.
LS.
Similar Messages
-
E71 SIP Internet Tel says "Unable to connect to th...
Has anyone who had the error message "Unable to connect to the connection network" managed to find a solution?
There are over 2,000 references to this exact error message on Google - it is a huge problem that I hope Nokia are addressing.
When I try to connect to my WLAN service from the Internet Tel screen, the WLAN icon flashes briefly and them almost seems to crash itself. 60 seconds later the message Unable to connect to the connection network, comes up.
Help, please!
Solved!
Go to Solution.Hi Nokkyear. I have been having the same exact issue using my E51 since I got the phone two weeks ago. After plenty of stress and anger, I somehow got it to work just a few minutes ago.
In my case, I made the following change and was finally able to connect and make a test call:
1> Under Connections/SIP Settings, I changed the PUBLIC USERNAME to the full address (i.e. [email protected]). Previously I had the xxxx portion of the address.
I had also removed the appearances of the "sip:" prefix from the proxy address, the registrar address and the public username address. I would say that only after I did that, I was able to connect to my SIP server....HOWVEVER, upon review now as I write this post, I can see that the "sip:" prefix has returned to the entries.
Try this and see how it works.
LS. -
CUCI Lync issue "Calls cannot be placed at this time"
Hello!
Could you please assist with the folowing?
Quite a time ago the CUCI Lync accounts were configured and working fine. I haven't touched their configuration at all since then. So now I 've got the need to use these accounts and met the error "Calls cannot be placed at this time". It happens both on CUCM 8.5.1 and CUCM 8.6.2.
The CUCI Lync is 8.6.2 but it doesnt really matter -> I tried the previous version - the issue remains the same anyway.
What could be the reason for such a thing? I'd appreciate any suggestions.
Thanks a lot!Are you using it in soft phone mode or cti control?
If soft phone is the CSF device registered and configured with proper CSS?
Chris
Sent from Cisco Technical Support iPhone App -
Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)
We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva -
Unable to connect to Planning URL after new instal & configuration 11.1.2
I have installed 11.1.2 on Windows 64 bit environment and configured.
Here is my environment:
Box 1. FS, Essbase, Weblogic, Oracle HTTP. Configured successfully and working great no issues (I have not configured web server in FS yet)
Box 2. Planning. Installation and configuration was successful.
Issue: however unable to connect to URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I am not expecting 19000 will connect)
Trobleshooting:
Upon running netstat, 8300 is not running on this box.
Also configured "Manage Planning Cluster" with no luck.
Weblogic (11g) server indicated planning state is unknown.
Diagnostic indicates: 1. system-jazn-data.xml file does not exist 2. web app for planning failed due to Error: java.net.ConnectException: Connection refused: connect
I have stopped and restarted Planning app service several time runs without any issue but unable to connect to URL and no port is running.
Planning log does not reveal any error messages.
EPM system log indicates ServletContainerAdapter manager not initialized correctly
There is no error in start-HyS9Planning-out.log.
start-HyS9Planning-error.log indicates The requested service has already been started.
There is an error in validation log:
[2010-10-06T10:18:23.171-04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle.EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU^MG1Cf8KW00000E,0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] Error checking response code: [[
java.lang.Exception: java.net.ConnectException: Connection refused: connect
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
at org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
at org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
at com.hyperion.cis.validation.RunningEnviroment.access$000(RunningEnviroment.java:40)
at com.hyperion.cis.validation.RunningEnviroment$1.run(RunningEnviroment.java:132)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
at sun.net.www.http.HttpClient.New(HttpClient.java:306)
at sun.net.www.http.HttpClient.New(HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:852)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:793)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:718)
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
... 21 more
What am I not doing?
Thanks for your help in advance!
Edited by: VenuRamini on Oct 6, 2010 7:25 AM
Edited by: VenuRamini on Oct 6, 2010 7:35 AMJohn, thanks for quick response!
I have restarted Planning and looked at the log file.
HyS9Planning-sysout.log indicated
<Oct 6, 2010 11:58:59 AM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xxxxxxxxxxxxxxx= from the file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Prior to this after reading epm_1112000_readme.pdf file on page 9 (issue 9180347, 8841004) there is known issue of not copying the file to destination location. Followed instruction and that did indicate that userid and pwd was not encrypted.
Here is the log when I change boot.properities files base on known issue stated above:
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 6, 2010 12:34:56 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
HyS9Planning-syserr.log has no info.
Edited by: VenuRamini on Oct 6, 2010 9:51 AM -
Lync "unable to connect" to meetings on Mountain Lion
Hi All,
I've just upgraded to Mountain Lion and am facing an issue with Lync where it won't connect to meetings. It will eventually connect after I refresh the URL enough times, but most times I will get this message:
"Unable to connect. Try connecting to the online meeting by using the Web browser that is currently open."
I've enabled logging and get a huge amount of output from just one attempt to load a meeting. Here it is below. Any ideas that could help?
Thanks in advance,
Evan11/15/2012|14:46:19.899 DA0:AC0B7A28 INFO :: ~In trxn corr-id (81D9F118)
11/15/2012|14:46:22.149 DA0:AC0B7A28 INFO :: ~In trxn corr-id (7B5E1038)
11/15/2012|14:46:22.877 DA0:AC0B7A28 INFO :: LoadXMLDOMNode: "XMLString size=481"
11/15/2012|14:46:22.877 DA0:AC0B7A28 ERROR :: CreateNewSqmSession: "Error: hr = 80000008 - " "Sqm is not enabled"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: - Log message too long!
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.878 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: AddListener: "Listener 'ConversationState' added to server link 'OCS-User-Services-Cluster'."
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: AddObserver: "Adding observer for local contact."
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: AddObserver: "subscrption type is NoSubscription"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: FireParticipantAdded: "ParticipantAdded Event Queued. Conv-81D04678, Participant-81D044A8, Evan Leonard"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: PropertyUpdateTrigger: "Can't update remote P2P recording policy because local or remote participant is empty."
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:22.879 DA0:AC0B7A28 ERROR :: GetCapabilities: "ConversationProperty_CanStartContentSharing not set on conversation state 81D04684 or set with type 0"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: ResourceMonitoringAddRef: "Adding 81D046B0 to m_resourceMonitoringClientArray"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: CanSelectResourcesToShare: "sAllowedAppDesktopSharingLevel set to 0"
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:22.879 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:22.880 DA0:AC0B7A28 INFO :: AddObserver: "Adding observer for local contact."
11/15/2012|14:46:22.880 DA0:AC0B7A28 INFO :: AddObserver: "subscrption type is NoSubscription"
11/15/2012|14:46:22.880 DA0:AC0B7A28 INFO :: CMfuConvLogObserver: "mfuGroupModel=82043618, convModel=81D04678"
11/15/2012|14:46:22.880 DA0:AC0B7A28 INFO :: InternalCreateConversation: "Created new conversation = 81D04678"
11/15/2012|14:46:22.889 DA0:AC0B7A28 INFO :: Set: "SetProperty this = 81886048, Property = 50331662"
11/15/2012|14:46:22.889 DA0:AC0B7A28 INFO :: Set: "SetProperty this = 81886048, Property = 16777223"
11/15/2012|14:46:22.889 DA0:AC0B7A28 INFO :: Set: "SetProperty this = 81886048, Property = 50331662"
11/15/2012|14:46:23.155 DA0:AC0B7A28 ERROR :: GetContentManager: "Error: returning hr = 80F10001"
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: Set: "SetProperty this = 81886048, Property = 117440523"
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: Set: "SetProperty this = 81886048, Property = 16777273"
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: Start: "StartMode this = 81886048, mode = 16"
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: CAcceptCallEscalation: "CAcceptCallEscalation - starting, this = 7ABF1808, mode = 4"
11/15/2012|14:46:23.156 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: hr = 80000008 - " "invalid session index 0."
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: Start: "Start - starting, this = 7ABF1808"
11/15/2012|14:46:23.156 DA0:AC0B7A28 INFO :: SetCurrentImplementation: "SetCurrentImplementation - current implementation now set to 3, this = 7ABC9208"
11/15/2012|14:46:23.157 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: FireParticipantStateChange: "ParticipantStateChange Event. Conv-81D04678, Participant-81D044A8, Voice - State - Outgoing - Cookie - 0x0000003e, hr=0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: DoWork: "DoWork - returning with hr = 0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: DoWork: "DoWork - starting, this = 7ABF192C"
11/15/2012|14:46:23.157 DA0:AC0B7A28 ERROR :: GetSqmSession: "Error: returning hr = 80000003"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: FireParticipantStateChange: "ParticipantStateChange Event. Conv-81D04678, Participant-81D044A8, LCSConf - State - Outgoing - Cookie - 0x0000003c, hr=0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: GetCapabilities: "State is not Ringing or >= InConversation : State = 2"
11/15/2012|14:46:23.157 DA0:AC0B7A28 ERROR :: Connect: "Couldn't Add Lobby Capable Property hr - 0x0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: Connect: "Send recording status when join conf: 0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 ERROR :: Connect: "Couldn't Add UCCOCE_CLIENT_RECORDING Property hr - 0x0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 ERROR :: Connect: "Couldn't Add UCCOCEE_PARTICIPANT_LIMIT_MAX Property hr - 0x0"
11/15/2012|14:46:23.157 DA0:AC0B7A28 INFO :: MSP.SetMultipartySsnRole[818BDD58] 0->0
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: There is no Service-Route to copy
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: call.SetRemote[7ADBD208] sip:*******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII:(null);(null),0,0
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: virtual HRESULT SIP_CALL::SetLocalAndRemoteForConnect(const CHAR*, SIZE_T, SIP_URL*, SIP_URL*, SIP_URL*, const CHAR*, SIZE_T, SIP_SECURITY_LEVEL, LONG, const SIP_HANDSHAKE_INFO*) - Call.Invite[7ADBD208]0:sip:******@progress.com==>sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII:, RM=(null)
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: HRESULT SIP_MSG_PROCESSOR::OnRequestConnectionConnectComplete(HRESULT) - Enter this: 7ADBD260, callid=(null), ErrorCode: 0x0
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: Outgoing 7ADBD260-<sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>, local=sip:******@progress.com
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: call.SetRemote[7ADBD208] sip:e******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII:(null);(null)
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: Out trxn corr-id (81D75FB8)
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: MSP.SetState[818BDD58] SIP_CALL_STATE_IDLE->SIP_CALL_STATE_CONNECTING, local=sip:******@progress.com
11/15/2012|14:46:23.158 DA0:AC0B7A28 INFO :: Trxn corr-id (81D75FB8), SIP msg corr-id (d3ca01ed)
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 2048 bytes:
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: INVITE sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII SIP/2.0
Via: SIP/2.0/TLS 192.168.7.4:41970
Max-Forwards: 70
From: <sip:******@progress.com>;tag=bf2aac529f;epid=4a70361eb5
To: <sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>
Call-ID: ffc368f9e7b6b6468946d573c258cae2
CSeq: 1 INVITE
Contact: <sip:******@progress.com;opaque=user:epid:kNer5o-kUl2g5CL0QZKI0AAA;gruu>
User-Agent: UCCAPI/4.0.7323.0 MC/14.0.0223.2 (Microsoft Lync for Mac 2011)
Supported: ms-dialog-route-set-update
Supported: timer
Supported: histinfo
Supported: ms-safe-transfer
Supported: ms-sender
Supported: ms-early-media
ms-keep-alive: UAC;hop-hop=yes
Allow: INVITE, BYE, ACK, CANCEL, INFO, UPDATE, REFER, NOTIFY, BENOTIFY, OPTIONS
ms-subnet: 192.168.7.0
Proxy-Authorization: TLS-DSK qop="auth", realm="SIP Communications Service", opaque="2E168D0E", targetname="NTMAUCSRV02.bedford.progress.com", crand="ec558eda", cnum="173", response="971830375043a006a8432dd7688e94bb4852a97e"
Content-Type: application/cccp+xml
Content-Length: 961
<?xml version="1.0"?>
<request xmlns="urn:ietf:params:xml:ns:cccp" xmlns:mscp="http://schemas.microsoft.com/rtc/2005/08/cccpextensions" C3PVersion="1" to="sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII" from="sip:[email protected]" requestId="0"><addUser><conferenceKeys confEntity="sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII"/><ci:user xmlns:ci="urn:ietf:params:xml:ns:conference-info" entity="sip:e******@progress.com"><ci:roles><ci:entry>attendee</ci:entry></ci:roles><ci:endpoint entity="{8709B4F1-0F5E-3844-A298-277B473F902F}" xmlns:msci="http://schemas.microsoft.com/rtc/2005/08/confinfoextensions"><msci:clientInfo><cis:separator xmlns:cis="urn:ietf:params:xml:ns:conference-info-separator"></cis:separator><m sci2:lobby-capable xmlns:msci2="http://schemas.microsoft.com/rtc/2008/12/confinfoextensions">true</msci2:lobby-capable></msci:clientInfo></ci:endpoint></ci:user></addUser> </request>
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: End of Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 2048 bytes
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: Enter - successfully sent INVITE
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: CEffectivePermissions: ""
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: CPermissionManager: ""
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: Initialize: ""
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: Recalculate: ""
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPermission: "Platform permissions not yet received: permission=2, attendee " "permission name='AsynchronousBrowsingAllowedAttendee', presenter permission name='AsynchronousBrowsingAllowedPresenter'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=2, policy name='EnableDataCollaboration'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=2, policy name='EnableDataCollaboration'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=2, policy name='EnableDataCollaboration'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=2, policy name='EnableDataCollaboration'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=2, policy name='EnableDataCollaboration'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=3, policy name='AllowAnnotations'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=3, policy name='AllowAnnotations'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=5, policy name='AllowPolls'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=1, policy name='AllowUserToScheduleMeetingsWithAppSharing'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 WARN :: GetPolicy: "Platform policy not yet received: policy=7, policy name='AttendeesCanShare'"
11/15/2012|14:46:23.159 DA0:AC0B7A28 INFO :: Initialize: ""
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:10, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 16 and HR: 0x80c80004."
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "[Auto]The Action and the value are 29 and 0 for sip:******@progress.com"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "The Action and the value are 29 and 0 for sip:******@progress.com"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:4, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:2, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:10, AppLayerAction:20 to Available :0"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 16 and HR: 0x80c80004."
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "[Auto]The Action and the value are 32 and 0 for sip:******@progress.com"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "The Action and the value are 32 and 0 for sip:*******@progress.com"
11/15/2012|14:46:23.160 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:10, AppLayerAction:22 to Available :0"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.160 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 16 and HR: 0x80c80004."
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "[Auto]The Action and the value are 34 and 0 for sip:e*****@progress.com"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "The Action and the value are 34 and 0 for sip:*******@progress.com"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:1 with AppLayerMode:0, AppLayerAction:26 to Available :0"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: HandleCapabilityChange: "[Auto]The Action and the value are 38 and 0 for sip:******@progress.com"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554436, pre: Property 33554436, value is empty, new Property 33554436, value 1"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:0, AppLayerAction:1C to Available :1"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:0, AppLayerAction:A to Available :0"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: virtual HRESULT SIP_URL::ParseUrlParams(const CHAR*, SIZE_T, SIZE_T*, BOOL) invalid char L found when trying to parse params
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: virtual HRESULT SIP_URL::ParseUrlBase(const CHAR*, SIZE_T, SIZE_T*, BOOL, BOOL) ParseSipUrlParams failed 80000008
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: InternalInitialize ParseSipUrl(sip:Evan Leonard) failed 80ee0012
11/15/2012|14:46:23.161 DA0:AC0B7A28 ERROR :: IsAnonymousUserUri: "Failed to parse uri: sip:Evan Leonard hr=80EE0012"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: SetStates: "Updating States. Old states =0x0, New states =0x1"
11/15/2012|14:46:23.161 DA0:AC0B7A28 INFO :: ProcessSingleConversationStateChange: "trigger = 0x81d04678, oldStates = 0x00000000, newStates = 0x00000001, " "oldAggregatedStates = 0x00000000, newAggregatedStates = 0x00000001"
11/15/2012|14:46:23.172 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.173 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.174 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.181 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777232, pre: Property 16777232, value is empty, new Property 16777232, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331649, pre: Property 50331649, value is empty, new Property 50331649, value is empty"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554435, pre: Property 33554435, value is empty, new Property 33554435, value is empty"
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: UpdateProperty: "Error: hr = 80000003 - " "Failed to convert from app layer property variant 805830658."
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Error: hr = 80000003 - " "Failed to update property for conversation."
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: OnPropertyChange: "Failed to handle conversation property change."
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777224, pre: Property 16777224, value is empty, new Property 16777224, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 22, participant 81D044A8, pre: Property 22, value is empty, new Property 22, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 23, participant 81D044A8, pre: Property 23, value is empty, new Property 23, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 24, participant 81D044A8, pre: Property 24, value is empty, new Property 24, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 25, participant 81D044A8, pre: Property 25, value is empty, new Property 25, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:0, AppLayerAction:B to Available :0"
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.182 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 10, participant 81D044A8, pre: Property 10, value is empty, new Property 10, value 1"
11/15/2012|14:46:23.182 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331653, pre: Property 50331653, value is empty, new Property 50331653, value "
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331654, pre: Property 50331654, value is empty, new Property 50331654, value "
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331662, pre: Property 50331662, value is empty, new Property 50331662, value 1"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331649, pre: Property 50331649, value is empty, new Property 50331649, value "
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554435, pre: Property 33554435, value is empty, new Property 33554435, value 1"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777223, pre: Property 16777223, value is empty, new Property 16777223, value 1"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777231, pre: Property 16777231, value is empty, new Property 16777231, value 1"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777243, pre: Property 16777243, value is empty, new Property 16777243, value 1"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331676, pre: Property 50331676, value is empty, new Property 50331676, value "
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554462, pre: Property 33554462, value is empty, new Property 33554462, value 0"
11/15/2012|14:46:23.183 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554463, pre: Property 33554463, value is empty, new Property 33554463, value 0"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554481, pre: Property 33554481, value is empty, new Property 33554481, value 0"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554464, pre: Property 33554464, value is empty, new Property 33554464, value 0"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554465, pre: Property 33554465, value is empty, new Property 33554465, value 0"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777255, pre: Property 16777255, value is empty, new Property 16777255, value 1"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777256, pre: Property 16777256, value is empty, new Property 16777256, value 1"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554479, pre: Property 33554479, value is empty, new Property 33554479, value 0"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777273, pre: Property 16777273, value is empty, new Property 16777273, value 1"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777281, pre: Property 16777281, value is empty, new Property 16777281, value 1"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331715, pre: Property 50331715, value is empty, new Property 50331715, value "
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 117440521, pre: Property 117440521, value is empty, new Property 117440521, value 7"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 117440523, pre: Property 117440523, value is empty, new Property 117440523, value 7"
11/15/2012|14:46:23.184 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 134217764, pre: Property 134217764, value is empty, new Property 134217764, value 8"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 369098814, pre: Property 369098814, value is empty, new Property 369098814, value 22"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554482, pre: Property 33554482, value is empty, new Property 33554482, value 0"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554483, pre: Property 33554483, value is empty, new Property 33554483, value 0"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554484, pre: Property 33554484, value is empty, new Property 33554484, value 0"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554485, pre: Property 33554485, value is empty, new Property 33554485, value 0"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554486, pre: Property 33554486, value is empty, new Property 33554486, value 0"
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.185 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554487, pre: Property 33554487, value is empty, new Property 33554487, value 0"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777280, pre: Property 16777280, value is empty, new Property 16777280, value 0"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 134217741, pre: Property 134217741, value is empty, new Property 134217741, value 8"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777223, pre: Property 16777223, value 1, new Property 16777223, value 1"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331662, pre: Property 50331662, value 1, new Property 50331662, value 1"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554463, pre: Property 33554463, value 0, new Property 33554463, value 1"
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554465, pre: Property 33554465, value 0, new Property 33554465, value is empty"
11/15/2012|14:46:23.186 DA0:AC0B7A28 ERROR :: UpdateProperty: "Error: hr = 80000003 - " "Failed to convert from app layer property variant 805830668."
11/15/2012|14:46:23.186 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Error: hr = 80000003 - " "Failed to update property for conversation."
11/15/2012|14:46:23.186 DA0:AC0B7A28 ERROR :: OnPropertyChange: "Failed to handle conversation property change."
11/15/2012|14:46:23.186 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777231, pre: Property 16777231, value 1, new Property 16777231, value 1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777232, pre: Property 16777232, value 1, new Property 16777232, value 1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:2, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:2, AppLayerAction:1D to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:2, AppLayerAction:13 to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:1D to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:2 to Available :0"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.187 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1D to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1D to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:2 to Available :0"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:2 to Available :0"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2 to Available :0"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1D to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1C to Available :1"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:29 to Available :0"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2A to Available :0"
11/15/2012|14:46:23.188 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2B to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2C to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2D to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:2E to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:18 to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:3 to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:10 to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:11 to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:C to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:19 to Available :0"
11/15/2012|14:46:23.189 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:800, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 50331658, pre: Property 50331658, value is empty, new Property 50331658, value sip:e*****@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII"
11/15/2012|14:46:23.190 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.190 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.190 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:1 to Available :1"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:2 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:3 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:4 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:5 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:7 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:8 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:9 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:14 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:11 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:10 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:12 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:6 to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:1B to Available :0"
11/15/2012|14:46:23.190 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:4, AppLayerAction:1 to Available :0"
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554462, pre: Property 33554462, value 0, new Property 33554462, value 2"
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554481, pre: Property 33554481, value 0, new Property 33554481, value 4"
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554464, pre: Property 33554464, value 0, new Property 33554464, value 4"
11/15/2012|14:46:23.191 DA0:AC0B7A28 ERROR :: OnParticipantStateChange: "Making outgoing call, no invited device detected."
11/15/2012|14:46:23.191 DA0:AC0B7A28 WARN :: ProcessSessionInvite: "failed to find remoteContactModel"
11/15/2012|14:46:23.191 DA0:AC0B7A28 WARN :: ProcessSessionDeflect: "failed to get remoteParticipant"
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.191 DA0:AC0B7A28 INFO :: SetState: "SetState for url:sip:******@progress.com with mode:4, PrevAppLayerState:1 to PrevOCApiState:0, NewAppLayerState:2 to NewOCApiState:1"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: FireMediaFlowChangedEventsAuto: "FireMediaFlowChannelEventsAuto for local: 1"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: GetDataFromState: "direction from state for Mode: 4, SubMode: 0, UcModalityState: 0 DirFromState: 0 ChannelState: 0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: GetDataFromState: "direction from state for Mode: 4, SubMode: 0, UcModalityState: 1 DirFromState: 0 ChannelState: 1"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: ApplyAndFireMediaFlow: "FireChannelState for Mode : 4, ModeSubtype: 0, PrevChannelState:0 to NewChannelState:1, NewChannelDirection:3 "
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: FireChannelStateChangedEvent: "The channel oldState 0 newState 1."
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: FireStateChangedEvent: "The channel oldState 0 newState 1."
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:0, AppLayerAction:1C to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:0, AppLayerAction:A to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 0."
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: OnCapabilityChange: "Failed to get the modality object. mode 0 and HR: 0x80c80004."
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1 to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1 to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:8, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.192 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554450, pre: Property 33554450, value is empty, new Property 33554450, value 2"
11/15/2012|14:46:23.192 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1 to Available :0"
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1D to Available :0"
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:200, AppLayerAction:1C to Available :0"
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554481, pre: Property 33554481, value 4, new Property 33554481, value 20"
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554464, pre: Property 33554464, value 4, new Property 33554464, value 20"
11/15/2012|14:46:23.193 DA0:AC0B7A28 WARN :: ProcessSessionInvite: "failed to find remoteContactModel"
11/15/2012|14:46:23.193 DA0:AC0B7A28 WARN :: ProcessSessionDeflect: "failed to get remoteParticipant"
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.193 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.193 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.193 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.193 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: HandleParticipantStateChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: OnCapabilityChange: "OnCapabilityChange for local:0 with AppLayerMode:800, AppLayerAction:1 to Available :0"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 27, participant 81D044A8, pre: Property 27, value is empty, new Property 27, value 8"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: enum_cast: "Unsupported conversation mode 16."
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: GetModality: "Error: returning hr = 80C80004"
11/15/2012|14:46:23.194 DA0:AC0B7A28 ERROR :: HandlePropertyChange: "Failed to get the modality object for mode: 0x10."
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554484, pre: Property 33554484, value 0, new Property 33554484, value -2131689324"
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554485, pre: Property 33554485, value 0, new Property 33554485, value -2131689324"
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554486, pre: Property 33554486, value 0, new Property 33554486, value -2131689324"
11/15/2012|14:46:23.194 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.195 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.195 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.195 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 33554487, pre: Property 33554487, value 0, new Property 33554487, value -2131689324"
11/15/2012|14:46:23.195 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777280, pre: Property 16777280, value 0, new Property 16777280, value -2131689324"
11/15/2012|14:46:23.197 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.197 DA0:AC0B7A28 INFO :: UpdateContentState: L"ContentState changed from [0] to [0]"
11/15/2012|14:46:23.197 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.197 DA0:AC0B7A28 INFO :: - Log message too long!
11/15/2012|14:46:23.237 DA0:AC0B7A28 INFO :: Data Received - 131.239.30.144:5061 (To Local Address: 192.168.7.4:41970) 1070 bytes:
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: SIP/2.0 183 Session Progress
ms-user-logon-data: RemoteUser
Record-Route: <sip:uc.progress.com:5061;transport=tls;ms-fe=NTMAUCSRV02.bedford.progress.com; opaque=state:T:F;lr;received=10.128.16.53;ms-received-cid=8DDEC603>
Authentication-Info: TLS-DSK qop="auth", opaque="2E168D0E", srand="E6C46CDE", snum="173", rspauth="96eba8b6de28f4e517b789868b4c1c5786faa55a", targetname="NTMAUCSRV02.bedford.progress.com", realm="SIP Communications Service", version=4
From: "Evan Leonard"<sip:******@progress.com>;tag=bf2aac529f;epid=4a70361eb5
To: <sip:*******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;tag=0E470080
Call-ID: ffc368f9e7b6b6468946d573c258cae2
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.7.4:41970;received=174.51.37.149;ms-received-port=47594;ms-received-cid =8DFFBC00
Contact: <sip:*******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;isfocus
Content-Length: 0
Record-Route: <sip:ucedge.progress.com:5061;transport=tls;opaque=state:Ci.R8dffbc00;lr;ms-rou te-sig=hihOyq1Oji6srJg30rPDBhzaIkH7aNTWpoI9SnbnbKDJrRbWCtb99KjwAA>
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: End of Data Received - 131.239.30.144:5061 (To Local Address: 192.168.7.4:41970) 1070 bytes
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: Trxn corr-id (81D75FB8), SIP msg corr-id (d3ca01ed)
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: HRESULT SIP_MSG_PROCESSOR::OnRequestConnectionConnectComplete(HRESULT) - Enter this: 7CBBE008, callid=ffc368f9e7b6b6468946d573c258cae2, ErrorCode: 0x0
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: Function: GetRSeqHeader
11/15/2012|14:46:23.238 DA0:AC0B7A28 ERROR :: HRESULT failed: 80ee0005 = hr . failed to get single header
11/15/2012|14:46:23.238 DA0:AC0B7A28 INFO :: MSP.SetState[818BDD58] SIP_CALL_STATE_CONNECTING->SIP_CALL_STATE_ALERTING, local=sip:*******@progress.com
11/15/2012|14:46:23.434 DA0:AC0B7A28 INFO :: Data Received - 131.239.30.144:5061 (To Local Address: 192.168.7.4:41970) 1739 bytes:
11/15/2012|14:46:23.434 DA0:AC0B7A28 INFO :: SIP/2.0 200 Invite dialog created
ms-user-logon-data: RemoteUser
Record-Route: <sip:uc.progress.com:5061;transport=tls;ms-fe=NTMAUCSRV02.bedford.progress.com; opaque=state:T:F;lr;received=10.128.16.53;ms-received-cid=8DDEC603>
Authentication-Info: TLS-DSK qop="auth", opaque="2E168D0E", srand="6C83E373", snum="174", rspauth="3fa0ece7e066883023cb64451785a1f69c668b5d", targetname="NTMAUCSRV02.bedford.progress.com", realm="SIP Communications Service", version=4
Content-Length: 509
From: "Evan Leonard"<sip:******@progress.com>;tag=bf2aac529f;epid=4a70361eb5
To: <sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;tag=0E470080
Call-ID: ffc368f9e7b6b6468946d573c258cae2
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.7.4:41970;received=174.51.37.149;ms-received-port=47594;ms-received-cid =8DFFBC00
Allow: INVITE, BYE, ACK, CANCEL, INFO, UPDATE
Contact: <sip:e******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;isfocus
Content-Type: application/cccp+xml
Session-Expires: 590;refresher=uac
Require: timer
Supported: timer
Record-Route: <sip:ucedge.progress.com:5061;transport=tls;opaque=state:Ci.R8dffbc00;lr;ms-rou te-sig=hihOyq1Oji6srJg30rPDBhzaIkH7aNTWpoI9SnbnbKDJrRbWCtb99KjwAA>
<response xmlns="urn:ietf:params:xml:ns:cccp" xmlns:ci="urn:ietf:params:xml:ns:conference-info" requestId="0" C3PVersion="1" from="sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII" to="sip:*******@progress.com" code="success">
<addUser>
<conferenceKeys confEntity="sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII"/>
<ci:user entity="sip:******@progress.com">
<ci:roles>
<ci:entry>presenter</ci:entry>
</ci:roles>
</ci:user>
</addUser>
</response>
11/15/2012|14:46:23.434 DA0:AC0B7A28 INFO :: End of Data Received - 131.239.30.144:5061 (To Local Address: 192.168.7.4:41970) 1739 bytes
11/15/2012|14:46:23.434 DA0:AC0B7A28 INFO :: Trxn corr-id (81D75FB8), SIP msg corr-id (d3ca01ed)
11/15/2012|14:46:23.434 DA0:AC0B7A28 ERROR :: virtual HRESULT OUTGOING_INVITE_TRANSACTION::ProcessFinalResponse(const SIP_MESSAGE*) SetRemoteContact failed failed (0x1)
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 983 bytes:
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: ACK sip:*******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII SIP/2.0
Via: SIP/2.0/TLS 192.168.7.4:41970
Max-Forwards: 70
From: <sip:******@progress.com>;tag=bf2aac529f;epid=4a70361eb5
To: <sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;tag=0E470080
Call-ID: ffc368f9e7b6b6468946d573c258cae2
CSeq: 1 ACK
Route: <sip:ucedge.progress.com:5061;transport=tls;opaque=state:Ci.R8dffbc00;lr;ms-rou te-sig=hihOyq1Oji6srJg30rPDBhzaIkH7aNTWpoI9SnbnbKDJrRbWCtb99KjwAA>
Route: <sip:uc.progress.com:5061;transport=tls;ms-fe=NTMAUCSRV02.bedford.progress.com; opaque=state:T:F;lr;received=10.128.16.53;ms-received-cid=8DDEC603>
User-Agent: UCCAPI/4.0.7323.0 MC/14.0.0223.2 (Microsoft Lync for Mac 2011)
Proxy-Authorization: TLS-DSK qop="auth", realm="SIP Communications Service", opaque="2E168D0E", targetname="NTMAUCSRV02.bedford.progress.com", crand="e64991d7", cnum="174", response="29f97a4e54f21fc97f12cb5f6e5f70ca499ea0c7"
Content-Length: 0
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: End of Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 983 bytes
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: HRESULT CUccConfSession::SetSourceNetworkType(UCC_SOURCE_NETWORK_TYPE) - setting source network type to 2
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: MSP.SetState[818BDD58] SIP_CALL_STATE_ALERTING->SIP_CALL_STATE_CONNECTED, local=sip:******@progress.com
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: There is no Service-Route to copy
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: HRESULT SIP_MSG_PROCESSOR::OnRequestConnectionConnectComplete(HRESULT) - Enter this: 7BEE6A0C, callid=(null), ErrorCode: 0x0
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: Outgoing 7BEE6A0C-<sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>, local=sip:******@progress.com
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: Out trxn corr-id (81AB7598)
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: Trxn corr-id (81AB7598), SIP msg corr-id (cead3805)
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 988 bytes:
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: SUBSCRIBE sip:******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII SIP/2.0
Via: SIP/2.0/TLS 192.168.7.4:41970
Max-Forwards: 70
From: <sip:******@progress.com>;tag=524743fe62;epid=4a70361eb5
To: <sip:[email protected];gruu;opaque=app:conf:focus:id:6E0QDRII>
Call-ID: 4dc8fb64eea96f43b42d0983f6598c47
CSeq: 1 SUBSCRIBE
Contact: <sip:e*****@progress.com;opaque=user:epid:kNer5o-kUl2g5CL0QZKI0AAA;gruu>
User-Agent: UCCAPI/4.0.7323.0 MC/14.0.0223.2 (Microsoft Lync for Mac 2011)
Supported: ms-dialog-route-set-update
Event: conference
Accept: application/conference-info+xml
Supported: com.microsoft.autoextend
Supported: ms-benotify
Proxy-Require: ms-benotify
Supported: ms-piggyback-first-notify
Proxy-Authorization: TLS-DSK qop="auth", realm="SIP Communications Service", opaque="2E168D0E", targetname="NTMAUCSRV02.bedford.progress.com", crand="e5a32fd9", cnum="175", response="7707fd6d84558fd6fad18fb4f241a41b17b24b2b"
Content-Length: 0
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: End of Sending Packet - 131.239.30.144:5061 (From Local Address: 192.168.7.4:41970) 988 bytes
11/15/2012|14:46:23.435 DA0:AC0B7A28 INFO :: StartWatching - issuing operation 81BC1A08, context = 81D3B408, type = 2
11/15/2012|14:46:23.436 DA0:AC0B7A28 INFO :: HandlePropertyChange: "Property 16777240, pre: Property 16777240, value is empty, new Property 16777240, value 1"
11/15/2012|14:46:23.947 DA0:AC0B7A28 INFO :: Data Received - 131.239.30.144:5061 (To Local Address: 192.168.7.4:41970) 9963 bytes:
11/15/2012|14:46:23.947 DA0:AC0B7A28 INFO :: SIP/2.0 200 OK
ms-user-logon-data: RemoteUser
Record-Route: <sip:uc.progress.com:5061;transport=tls;ms-fe=NTMAUCSRV02.bedford.progress.com; opaque=state:T:F;lr;received=10.128.16.53;ms-received-cid=8DDEC603>
Authentication-Info: TLS-DSK qop="auth", opaque="2E168D0E", srand="C1039F6C", snum="175", rspauth="123c44b0089869bd78858b64ed858f29131aa294", targetname="NTMAUCSRV02.bedford.progress.com", realm="SIP Communications Service", version=4
Content-Length: 8719
From: "Evan Leonard"<sip:******@progress.com>;tag=524743fe62;epid=4a70361eb5
To: <sip:*****@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;tag=161F0080
Call-ID: 4dc8fb64eea96f43b42d0983f6598c47
CSeq: 1 SUBSCRIBE
Via: SIP/2.0/TLS 192.168.7.4:41970;received=174.51.37.149;ms-received-port=47594;ms-received-cid =8DFFBC00
Expires: 3725
Content-Type: application/conference-info+xml
Event: conference
subscription-state: active;expires=3725
ms-piggyback-cseq: 1
Supported: ms-piggyback-first-notify
Contact: <sip:*******@progress.com;gruu;opaque=app:conf:focus:id:6E0QDRII>;isfocus
Record-Route: <sip:ucedge.progress.com:5061;transport=tls;opaque=state:Ci.R8dffbc00;lr;ms-rou te-sig=hinPljFVwwYwUE1xyp7X8k-kP1PE-eAVW46otiwO4fFnn-Hdmtb99KjwAA>
<conference-info xmlns="urn:ietf:params:xml:ns:conference-info" xmlns:msas="http://schemas.microsoft.com/rtc/2005/08/asconfinfoextensions" xmlns:msav="http://schemas.microsoft.com/rtc/2005/08/avconfinfoextensions" xmlns:msci=" -
Lync 2011 Mac - 14.0.11 unable to connect
Using VPN connecting to Lync is just spinning and unable to connect.
With Lync 14.0.10 and before, the Lync client would go through a few different servers to connect and failing before being able to connect to the external server. For each "internal" server it would then fail with:
InternalConnect, NLCreateConnection returned: -3264,
With Lync 14.0.11, instead of going down the list of servers it instead keeps on trying to go to the same internal server .Hi ErikHMac,
To narrow down the issue, I would like to confirm the following questions.
Can you manually configure Lync client to connect to Lync Server ? (Manually enter the Internal/External Server Name or IP address)
Can you auto sign in from Internet ?
“With Lync 14.0.11, instead of going down the list of servers it instead keeps on trying to go to the same internal server .”
I did not find the problem that you mentioned.
Microsoft Lync 14.0.11 (150304)
MacOS version 10.10.2 (build 14C109)
2015/03/16 22:08:09.202 Office Communications Server LOGON STARTED: USER = {MyDomain\LyncDemo2}
2015/03/16 22:08:09.202 SIPService::Logon
2015/03/16 22:08:09.241 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.265 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.265 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.269 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.270 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.271 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.271 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:09.273 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 10, newState: 20, direction: 0
2015/03/16 22:08:09.421 InternalConnect, NLResolveAddress returned: 0
2015/03/16 22:08:09.423 IsLocalAddress, 'sipinternal.MyDomain.com' is not a local address
2015/03/16 22:08:09.423 FShouldUseProxy, is returning 1
2015/03/16 22:08:09.424 Connecting to sipinternal.MyDomain.com (port 5061)
2015/03/16 22:08:13.502 InternalConnect, NLCreateConnection returned: 0,
2015/03/16 22:08:13.502 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/03/16 22:08:24.009 InternalConnect, NLCreateConnection returned: -3259,
2015/03/16 22:08:24.009 FUsingHttpsTunnelProxies, returning: 0
2015/03/16 22:08:24.011 Listening thread got exception -3259
2015/03/16 22:08:26.072 InternalConnect, NLResolveAddress returned: 0
2015/03/16 22:08:26.073 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/03/16 22:08:26.073 FShouldUseProxy, is returning 1
2015/03/16 22:08:26.074 Connecting to sip.MyDomain.com (port 443)
2015/03/16 22:08:26.364 InternalConnect, NLCreateConnection returned: 0,
2015/03/16 22:08:26.364 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/03/16 22:08:28.438 InternalConnect, NLResolveAddress returned: 0
2015/03/16 22:08:28.439 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/03/16 22:08:28.439 FShouldUseProxy, is returning 1
2015/03/16 22:08:28.440 Connecting to sip.MyDomain.com (port 5061)
2015/03/16 22:08:28.768 InternalConnect, NLCreateConnection returned: 0,
2015/03/16 22:08:28.768 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/03/16 22:08:29.194 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): ip 192.168.100.187, link speed 0
2015/03/16 22:08:29.194 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): Working around 0 link speed
2015/03/16 22:08:29.196 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 20, newState: 30, direction: 0
2015/03/16 22:08:29.198 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.199 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.204 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.222 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.223 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.256 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.256 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.264 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.264 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.286 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.286 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.293 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.293 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.434 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.434 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/03/16 22:08:29.437 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 1, HasSignedOut: 0
2015/03/16 22:08:29.437 virtual void SIPService::OnIdleHandleLogonSucceeded()
2015/03/16 22:08:29.440 Office Communications Server LOGON ENDED: USER = {MyDomain\LyncDemo2}
2015/03/16 22:08:30.101 IsLocalAddress, 'lyncpool01' is not a local address
2015/03/16 22:08:30.101 FShouldUseProxy, is returning 1
2015/03/16 22:08:30.101 IsLocalAddress, 'lyncpool01' is not a local address
2015/03/16 22:08:30.101 FShouldUseProxy, is returning 1
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]. -
My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.
Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419 -
N80i SIP client problem "unable to connect"
I'm having a problem with my N80i. When i use my phone in my WLAN for browsing the internet everything works fine. The problem appears when I try to use de SIP client, i always get "unable to connect to network". I've configured a Gizmo account,but can't connect. I've also configure an asterisk SIP account on my local network (in order to avoid any routing/port blocking/fw issue) and the same thing happens. In fact I've activated a sniffer in my linux box and I don't see any packet coming from the phone.
As far as I've investigated it seems like the problem occurs inside the phone (no ip packets come from the N80).
I wonder if it might be a firmware block.
Any help will be really appreaciateI want to share with you my experience, just in case someone is having the same problem I had.
I could solve the problem. Here is the config I use in the SIP settings:
Profile name: {whatever U want}
Service profile: IETF
Default access point: {a WLAN access previously define as access point from the WLAN wizzard}
Public user name: sip:{user}@{Server IP or name}
Use compresion: no
Registration: always on
Use security: no
Proxy Server:
Proxy server address: sip:{server ip or name}
Realm: asterisk (in case u are using asterisk or the same name defined in proxy server address)
User name: {user}
Password: {password}
Allow loose routing: Yes
Transport Type: UDP
Port: 5060
Registar Server: {same settings like proxy server}
I've to mention that while i was trying to make it work, i downloaded GizmoVoip (without success), but when I tried Truphone (www.truphone.com) it did work. So what i did was to copy exactly the same profile (SIP Settings->Options->Add new->Use an existing profile->Truphone-home) and with that i created a new profile. After that I changed the config to match my asterisk and....IT'VE WORKED!!!!
So, the conclution: I think the problem i was experiecing was due to a missconfig in the "proxy server address" or "Public user name", I'm not sure if I was putting the "sip:" at the beginning (i made to many tests that i can't remember). If that was the mistake then it seems like the Nokia N80 was not even trying to connect to the server and that was the reason why I was not seeing any packet coming from the phone with the sniffer.
I hope this info will be useful for everyone.
Martin -
Unable to connect india number when i call local r...
Unable to connect india number when i call local registered number. Pelase advise immediately.
Hello,
The service has been down for a short time today. Please try again and accept our sincere apologies for the inconvenience.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
VVX handset initiated call will not connect to Lync client with simultaneous ring enabled
Has anyone encountered a similar issue? And any advice on how to fix it please? (note - a case has been logged with Polycom, but weeks are passing by and they have not provided any useful response so far; hence reaching out in
the community for help) .... thanks in anticipation.
Here's the scenario:
A Lync 2010 user in the office (I'll call her Lisa) has setup her Sim Ring to an external number (her mobile number).
Another Lync 2010 user in the office (Mike) calls Lisa's extension from his VVX410.
Lisa answers the incoming call using her Lync client with a USB headset.
The call appears to connect according to Mike and his VVX screen starts the call timer.
Lisa's Lync client just says "Connecting Call ..." but never actually connects.
The line is silent for both Mike and Lisa. There is no audio in either direction.
Further testing reveals the following:
The same problem occurs if Lisa uses a VVX handset to answer and also happens if she uses a CX600 handset to answer. Hence the problem seems to relate specifically to the fact that Lisa has setup Sim Ring to an external number; rather than relating
to the answering device type.
If Lisa changes her Sim Ring so that it calls another internal extension, then the problem does not exist, i.e. calls connect fine. Hence it seems to be specific to sim ring to an external number.
The environment is Lync Server 2010 CU6, Lync client 2010 on Win 7 (although the same problem exists when tested with a Lync 2013 on Win 8.1 client); and with AudioCodes Mediant 2000 and 1000 gateways.Please specify another external number for Simultaneously Ring.
You phone may not have permission to dial an external phone number.
Please check if you can call the external phone number directly.
Lisa Zheng
TechNet Community Support -
I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
ThanksNoooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!
-
Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
Error calling report FRM-41213 unable to connect to Report Server
Hi,
I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
I installed it in both Windows 2000 SP4 and Windows XP SP2.
I would like to call a Report using a button inside Oracle Form.
I create my own Report Server, using : rwserver server=repsrv
A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
In Form (inside a button -> WHEN-BUTTON-PRESSED) :
1. Using RUN_REPORT_OBJECT()
rep_id := find_report_object('REPORT10');
if not id_null(rep_id) then
v_rep := run_report_object(rep_id);
else
message('Null');
end if;
a. If I did not specify the name of the Report Server in Reports node of Form's property object
(I leave it blank)
The following error appear :
FRM-41211: Integration error, SSL failure running another product
b. If I specify the name of the Report Server : repsrv
The following error appear :
FRM-41213: Unable to connect to Reports Server repsrv
2. Using WEB.SHOW_DOCUMENT()
a. If did not I specify the server name in the parameter
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server rep_<computer_name> failed
b. If I specify the server name in the parameter --> server='repsrv'
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server repsrv failed
In Report :
If I try to navigate manually to :
1. http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally,
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server repsrv failed
4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
5. I have tried to use rwrun in command line.
rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
Question :
1. What supposed to be done?
The Report server is ready, but the web browser seems unable to connect to Report Server.
2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
Any help would be grateful.
Many thanks,
BuntoroHi,
Problem solved.
I got the solution from another post.
Re: REP-51002: Bind to Reports Server rep failed
Here are the step I did.
Note : Please make backup for the following file : rwnetwork.conf
- In file rwnetwork.conf, remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
It should look like this :
<namingService name="Cos" host="blahblah" port="14021"/>
- I did not change the : name="Cos", since I do not understand what does it for
- Save you changes.
- Start the OC4J.
- Find the location of : namingservice.bat (on Windows platform)
- execute in the command line : namingservice.bat 14021
- finally start the report in the web browser
Note:
To shutdown the namingservice, use : namingservice.bat 14021 shutdown
Regards.
Buntoro -
When the update for my browser took place, on 5/5/14 @ approximately 12:15 am, it rendered the browser unable to connect to any websites. It does work in safe mode, but not in regular mode. I am on an hp pavilion dv7, running windows 7. I need to resolve this issue ASAP. Or I will have to switch browsers, which I don't want to do, as I have used Firefox for many years. Can I get some assistance to rectify the problem?
Can you start by giving us the troubleshooting information from the Firefox installation that's having problems. This is an essential step in troubleshooting.<br>
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the sub-menu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Maybe you are looking for
-
Best Practices for Upgrade UCS firmware from 2.0 to 2.2?
Hi I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution: - 1. Upgrading from Release 2.0 with Au
-
Revision no of Routing/Inspection plan in Purchase order
Hi MM friends, I have two requirements from client 1. Is it possible to update the revision number of Routing/inspection plan or attaching any document in Purchase order to inform the vendor the relevant changes. 2 Also the Routing changed revision n
-
Hi there, Anybody can help me,just I have a page with 3 numeric field and I need to validate these field, the idea is accept only numeric input, how can I do this?
-
I have installed ccx 8.0.2 in cluster (pub and sub). I changed application user and password via CLI, it seems the process goes good but when I tried to get access to ccx editor, rtmt or other application I get a mistake (wrong user or password) and
-
hi, Regarding bank payment voucher print we have customised with the help of abapers. in the voucher print, system is printing exactly the invoice reference and amount of the particular payment.(if it is a full payment or part payment) But for the fi