Sip Settings

I have a nokia 5230 and i am trying to set up the SIP, i did that perfectly but then it says that i have to go to "internet tel" to finish the set up. Here is the problem that i do not see that option under Connection on my nokia. Can you please advise how to finisht the setting?

DAGR80NE wrote:
I have a nokia 5230 and i am trying to set up the SIP, i did that perfectly but then it says that i have to go to "internet tel" to finish the set up. Here is the problem that i do not see that option under Connection on my nokia. Can you please advise how to finisht the setting?
I can suggest two possibilities:
(1) The 5230 does not have a fully-functional SIP VoIP builtin client the way E/N series handsets do have, and indeed, the 5230 is not listed on VoIP support in Nokia devices.
(2) You have to install a small piece of code from Nokia, called "SIP VoIP Settings" (the one that is to be used with S60 Rel. 5), and only through this software an internet telephone profile can be generated for a SIP provider.
If it turns that No. (1) above is the case, I would suggest trying to install Fring for Symbian, and place calls through Fring using the said SIP provider's account...

Similar Messages

N900 - "public user name" in sip settings!

on symbian n95/n82 phones: sip settings: there is a field "public user name".
the info there is what the caller id sends to the receiver of the call.
so i had "sip:[email protected]" (nonoh is my voip service and my mobile is
registered with them) and the receiver of my calls sees my mobile # calling ...
not private #, or a strange # that he/she would not care to call back ...
how can i add this to my settings
i tried to play with accounts.cfg
in
/home/user/.rtcom-accounts/
but with no effect
please help!!
thank u!

anyone can help?
thank you!!

How to Delete Locked SIP Settings.

Hello,
I tried adding one profile to my SIP Settings. It got created successfully but a LOCK SIGN is appearing along with it. and I am not able to DELETE the profile or edit it.
Can anyone kindly guide me how to DELETE/EDIT it and send the requested information to my mail id [email protected]
Thanks,
Pawan.

try resetting device with the following codes
With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work.
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, /GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Why there is a SIP settings if VoIP is not present...

Hello,
Kindly ask you to explain subject of this post. There is SIP settings on my C5-03 but I can find how to make an internet call ! Moreover nothing about SIP in official attached phone manual.
There is an advise to install "SIP_VoIP_3_1_Settings_S60_5_x_v1_0_en.sis" which will create additional menu like "Advanced SIP seetings" but it doesn't help in my case. Probably that old plugin just not capable with new C5-03.
I can see that this is not only my problem. Please try to resolve this issue, it's very stupid to have SIP settings but not able to make internet VoIP call.
Best regards,
another department.

Hello,
Thank you for quick reply. But seems that you didn't read my post carefully.
I have already perform SIP settings and made my phone registered with configured SIP profile.
Problem is that I can't find how to make VoIP call after that.
In Nokia E63 it was very simple After dialing the number you need just to choose voice, video or Internet call (using created SIP profile) option.
But seems R&D just forgot to put it in call options.
Also given link are leading to already installed "SIP VoIP Settings (SIP_VoIP_3_1_Settings_S60_5_x_v1_0_en.sis)".
However mentioned "Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > VoIP services"
still not present.
Same was indicated by other users, shown in my previous post.
I'm sure that somebody from Nokia is present here, guys, just tell how to make VoIP call using already registered and configured SIP profile, so simple.

How to configure SIP settings on Nokia E51

Hello to all.
I need help. I have
Username
Authentication Username
SIP address
SIP Password
Domain
Outbound Proxy
in one of big SIPs provider but i cant configure my phone work with it. Please help me. I allready installed SIP Voip settings from nokia store.

Have you checked out this post upon forum http://discussions.nokia.com/t5/Connectivity/Nokia-E51-SIP-Settings/m-p/481535/highlight/true#M24073 or this resource?http://www.voip-connections.com/wp-content/uploads/2011/06/How-to-configure-Nokia-E51-and-E71-to-con...
Happy to have helped forum in a small way with a Support Ratio = 37.0

E65/3com NBX SIP settings

I cannot get an e65 to successfully register to a 3com NBX SIP server. My settings are
service profile: IETF
default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
Public User name: sip:[email protected]
Compression: no
Registration: Always on
use security: no
Proxy Server
Address: sip:10.10.10.1
Realm: None (do not add this to other SIP phones)
username: 422
password: xxxx
Loose Routing: No
Transport Type: UDP (Have tried all three)
Port: 5060 (This is as set on Server)
Registrar Server
address: sip:10.10.10.1
Realm: None
Username: 422
Password: xxxx
Loose Routing: No
Transport: UDP
Port: 5060
Both Proxy and Registration Servers are set the same as they are the same Box. I'm not sure what to do with "Realm", my other SIP phones do not require this setting. Memory cards are no in, Is this a problem?
Regards,
Adam

I dont think I can remove the password, the user profile created on the 3Com NBX must have a password set. I tried the following setting but still get a failed to connect message. Is there documentation on what all the SIP settings are? eg. use security? use compression?
service profile: IETF
default access point: AP Profile (this WLAN works and I can connect to the server from internet browsing)
Public User name: sip:[email protected]
Compression: no
Registration: Always on
use security: no
Proxy Server
Address: sip:10.10.10.1
Realm: None 10.10.10.1
username: 422
password: xxxx
Loose Routing: Yes
Transport Type: UDP (Have tried all three)
Port: 5060 (This is as set on Server)
Registrar Server
address: sip:10.10.10.1
Realm: 10.10.10.1
Username: 422
Password: xxxx
Loose Routing: Yes
Transport: UDP
Port: 5060
Regards,
Adam

SIP settings for Nokia N95

Hi All,
Can anybody provide detailed guide on how to make SIP settings for N95 so that I can use internet telephony thru my router?
Thanks in advance.

It'll involve using a proxy put at your disposal by your VoIP provider. Contact them for more details. People here can't help you because they have no reason to know your provider's settings.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

X3-02 sip settings issue

HI All
Has any one managed to set X3-02 with sip settings from third part provider not supported in Internet Phone settings?
Tried to follow this
Nokia X3-02 with VOIP other than Gizmo5
and I have set it up without any problems and got logged in.
The problem starts when calling as the other person cannot hear me. I can here with no problem but I also hear my own voice (just like echo).

sudude wrote:
Has worked fine for me and on my friends phones as well.
Take a look at this, /t5/Pool-of-Knowledge/Series40-phones-and-VoIP/td-p/1146267
Tried this already and got the it logged in for 12voip as well as justvoip. I can call and I get connected but the communication works only one way which means that the person who I call can not hear a thing. On my site I can hear with no problem and quality is fine.
I presume that there is something wrong with my settings, please see xml uploaded in my phone attached.
sudude Did you create you own xml or used n0kVoIP? I Google it but I cannot get it anywhere.
Attachments:
example.zip ‏2 KB

Nokia E51 SIP Settings

For those of you who may be looking for the SIP Settings of your Nokia E51 (maybe this is also applicable to other Nokia models)
I found the solution in: http://www.daniweb.com/blogs/entry2352.html#
But I'm using Voipbuster & so the settings hereunder are for that voip service.
You may just have to change the values depending on your account and voip service provider.
Voipbuster settings for Nokia E51:
Profile Name: Voipbuster
Service Profile: IETF
Default Access Point: Whatever your access point name is.
Public user name: sip:[email protected]
Use Compression: No
Registration: Always on
Use Security: no
Proxy Server:
Proxy Server Address: sip:sip.voipbuster.com
Realm: sip.voipbuster.com
Username: XXXXXXX
Password: XXXX
Allow loose routing: yes
Transport Type: UDP
Port: 5060
Registrar Server:
Registrar server address: sip:sip.voipbuster.com
Realm: sip.voipbuster.com
User name: XXXXXXX
Password: XXXX
Transport Type: UDP
Port: 5060

What do you mean by "caller ID to work"?
First of all, does the SIP settings of Justvoip work with your E52?
http://justvoip.com/en/sipp.html
Or the SIP settings work but you are just asking about the name/number that appears on your friends' display screen when you call them?
As Justvoip & Voipbuster are both from Betamax, I guess it's the same system.
You can't just put any number that you want to appear as your caller ID.
As I said in my previous post, you must register those numbers first as your official caller ID number in Justvoip/Voipbuster.

SIP settings on nokia X6

I just got an X6. I don't have experience with any other nokia smart phones.
So what is the function of SIP settings under Settings->connectivity->admin settings? Is it supposed to allow you to make VOIP calls? I read in the forums that a lot other phones can be made doing so. If this is the case, how do I setup my profile? I keep on getting "registration fail"

To be able to make voip calls on your phone you will also need to install a voip settings application. I do not know if this is supported on the X6, it is not listed here:
http://www.forum.nokia.com/Technology_Topics/Mobile_Technologies/VoIP/Nokia_VoIP_Framework/VoIP_supp...
You can try installing the S60V5 version you can download from here: http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...

Need Actionvoip or Nymgo (SIP) settings for Nokia ...

I've been using my Nymgo and Actionvoip (SIP) services on my previous Symbian based device Nokia N8.
Recently I have got my Nokia N9(powered by Meego), I tried to add my SIP accounts but failed. So, if anyone of you can help me with that I will be very thankful.
Regards,
Ahmed.
If my post helped you, click that white Kudo star, Thanks!
Year 2007: Nokia 1600........ Year 2010: E63(May), E72(Jun, Jul), N97 mini(Aug - Dec), Year 2011: N8(Jan- May), E7(Jun - Sep), N9(Oct,11 - Present), 808PureView(Oct,13 - Present)
Solved!
Go to Solution.

qaisabrar wrote:
Action Voip is working fine on Nokia N9.
go to accounts . press add account, type address as user [email protected] and then password. then go to advance setting and type only the user name and proxy: sip.actionvoip.com.Transport change to UDP.
It should work.
Thanks for your reply Mr. Abrar, I tried the steps you have explained but it's still not working, say: "Sorry, can't connect to sip.". It used to work like charms on my Symbian device N8.
Don't know what to do? :-(
Thanks anyway for you help, I hope someone who solved this would be of help with some screenshots if possilble.
If my post helped you, click that white Kudo star, Thanks!
Year 2007: Nokia 1600........ Year 2010: E63(May), E72(Jun, Jul), N97 mini(Aug - Dec), Year 2011: N8(Jan- May), E7(Jun - Sep), N9(Oct,11 - Present), 808PureView(Oct,13 - Present)

VCS & SIP Domain Settings

Greetings:
I signed up for this beta version and noticed, based on other discussions in the form, that it requires me to install a pre-configured version of the client. I already have the client on my laptop and do not want to overwrite it with the client installed by the pre-configured installer because I will lose the ability to change the VCS & SIP settings. Does someone know what the settings are in the pre-configured client so that I can manually update them on my client?
Thanks.

Internal Server -
https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
SIP Domain -
jabber.com

Sip server settings Nokia E63

Hi, I want sip settings of actionvoip in my Nokia E63 i wanna make new server profile plz help me if every one know this problem... I shall b very thankful to you for that.

I recommend the following steps for setting up your Nokia E63 for VoIP over Wifi (and perhaps for other S60 based phones as well), for Voip.ms, the realm settings were the same as the others:
How to configure SIP profile in Nokia Eseries devices for VoIP calls?
This text is a cut-and-paste from Nokia's FAQ.
The Nokia Eseries mobile devices support SIP VoIP internet calls. This article describes a sample configuration when user authentication is enabled in the SIP proxy and registrar servers. The proxy and registrar servers are located in the same device in this sample.
Before configuring the mobile device, the following information should be obtained from the SIP service provider (some other parameter values may also need to be checked if not using the default values):
SIP proxy and registrar server address ("sip.voipservice.com" in this sample)
SIP proxy realm ("inphone.com" in this sample)
SIP registrar realm ("sip.voiceservice.com" in this sample)
User name ("1234567" in this sample for both the proxy and registrar)
User password ("1234")
Public user name ("[email protected]" in this sample)
In order to establish a VoIP call, a WLAN access point needs to be defined in the mobile device access point settings and the mobile device must be within the reach of the WLAN network.
Start the mobile device SIP configuration by going to menu Tools > Settings > Connection > Sip Settings and by creating a new SIP profile. The following parameters are defined in the profile:
Profile name: Siptest (can be freely chosen)
Service profile: IETF
Default access point: WLAN access point used for the VoIP connections
Public user name: [email protected] (note that the public user name must be given in this format, including the domain name)
Use compression: no
Registration: when needed (set "always on" if you want the registration to occur automatically)
Use security: no
Proxy Server:
Proxy Server Address: sip.voipservice.com
Realm: inphone.com
User name: 1234567
Password: 1234
Allow loose routing: yes
Transport type: UDP
Port: 5060
Registrar:
Registrar Server Address: sip.voipservice.com
Realm: sip.voipservice.com
User name: 1234567
Password: 1234
Allow loose routing: yes
Transport type: UDP
Port: 5060
Note that the realm name is often the same for both the proxy and registrar but the name may also be different, as in this sample. If the registrar realm name is not correctly defined, the registration will fail. If the realm name of the proxy is not correct, the registration may succeed but the internet calls will fail.

E72 unable to create new sip profile

I am trying to create new sip profile from options>settings>connection>sip settings
nohing happens when I select new sip profile using default profile
I hav already reset the phone using *#7780# but problem is still there
please help ?
Solved!
Go to Solution.

*#7780# does not reset the phone. It just restores factory default settings.
In order to reset the phone you need to use *#7370# instead. Back up everything except your settings beforehand because this does erase the phone's C: drive entirely.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Help understaning NAT table for SIP

Hi Folks,
I've been battling SIP and NAT for nearly 3 months now I've got to the point where I think I may well have found a bug in IOS. Incoming calls are not getting to my CME, outbound calls are fine. The sip-ua is registered fine.
2611xm-1#show sip-ua register status
Line                              peer        expires(sec) registered
================================ ========== ============ ==========
01xxxxx8882                       -1          86            yes
Without a static route, the NAT translation table on the 877 that connects to the internet looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:1024 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
No incoming calls come through, but looking at the table, I understand why as the ITSP is routing calls to ports 5060, not 1024.
With this static route:
ip nat inside source static udp 192.168.1.254 5060 82.70.85.118 5060 extendable
The table looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:5060 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
udp 82.70.85.118:5060 192.168.1.254:5060 ---                ---
Incoming calls come through, which makes sense as the port is now open!
If I delete the static route, clear the translation table and re-register the sip-ua the table looks like this:
877va-1#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
udp 82.70.85.118:5060 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
Calls come through for around 12 hours (probably until something times out and the sip-ua re-registers to the first scenario on port 1024).
Why is the 877 setting up the translation to port 1024 - what can I do to fix this?
My 877 settings are:
no ip nat service sip udp port 5060
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 192.168.2.0 255.255.255.0 192.168.1.254
My CME SIP settings are:
sip-ua
credentials username 01xxxxx8882 password xxxxxxxxxxxxxxxxxxx realm voip.zen.co.uk
authentication username 01xxxxx8882 password 7 xxxxxxxxxxxxxxxxxxxxxxxxx
nat symmetric role active
nat symmetric check-media-src
retry invite 3
retry register 10
timers register 150
registrar dns:voip.zen.co.uk expires 120
sip-server dns:voip.zen.co.uk
connection-reuse
host-registrar
permit hostname dns:voip.zen.co.uk
permit hostname dns:asterisk01.voip.zen.co.uk
permit hostname dns:asterisk02.voip.zen.co.uk

Thanks fo thre reply Daniele.
IOS is 15.3(3)M, but I've updated this today from an ealier version hoping to fix the problem.
If I do the following:
877va-1#show ip nat translations | include 5060
udp 82.70.85.118:1029 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
877va-1#clear ip nat trans
877va-1#clear ip nat translation *
877va-1#clear ip nat statistics
Then on the CME box, re-register the sip-ua.
877va-1#show ip nat translations | include 5060
udp 82.70.85.118:1030 192.168.1.254:5060 212.23.7.228:5060 212.23.7.228:5060
It takes the next port. Its never using 5060 in the first place from what I can tell

Sip Settings

Similar Messages

Maybe you are looking for