SIP - Unable to find load - Constant restart

I am having a problem getting a SIP phone to use it's current load and/or upgrade it's load. The error message is "Load not Specified" This is what I have in my SIPDefault.cnf
image_version:POS30704 ;
proxy1_address:192.168.2.201
proxy1_port:5060
proxy_register:1
I've tried several methods of the naming convention like POS3-07-4-00 .
The OS7 file has: P003-07-4-00
It keeps rebooting after it reads the SIPDefault.cnf

I have just done this conversion couple of days ago. Tell me the complete list of files you have for SIP?
P0S3-07-4-00 <- this is correct format for image version value in SIPDefault.cnf file. You can try to put a space after the last '0' if it doesn't work. Within this file i.e. SIPDefault.cnf you can change this parameter only - no need for proxy or other settings - just leave it as-is but of course modify image version as mentioned above. For SIP specific configuration settings - use SIP.cnf
let us know how you get on.
Ajaz

Similar Messages

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Did you try more than once? If so:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

JDBC error - Unable to find or load Driver

Hi,
I'm attempting to connect to a MySQL database with using the statement below, using MySQL Connector 3.0.8:
public void connectToDB() {
try {
connection = DriverManager.getConnection(
"jdbc:mysql://localhost:3306/accounts?user=root&password=spider");
} catch(SQLException connectException) {
System.out.println(connectException.getMessage());
System.out.println(connectException.getSQLState());
System.out.println(connectException.getErrorCode());
However, I obtain the error shown below when executing my code:
C:\> java Accounts
Unable to find and load Driver
which is an output from:
public Accounts() {
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
} catch (Exception e) {
System.err.println("Unable to find and load driver");
System.exit(1);
My database is not located on another machine, but on the same machine rather (127.0.0.1) i.e. on my local PC.
I've tried trouble shooting the problem by:
C:\> telnet localhost 3306
Bad Connection 4.0.20a-max@!5
Connection to host lost
C:\> ping 127.0.0.1
4.0.20a-maCGxG;2&f,☻
Connection to host lost.
C:\>ping 127.0.0.1:3306
Ping request could not find host 127.0.0.1:3306. Please check the name and try a
gain.
C:\>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
Could anyone kindly tell me where did I go wrong, and how do I go about solving this issue?
Below is the complete set of code(Accounts.java) which querries, inserts and deletes entries in the database.
Thanks in advance.
// Accounts.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
import java.util.*;
public class Accounts extends JFrame {
private JButton getAccountButton,
insertAccountButton,
deleteAccountButton,
updateAccountButton;
private JList accountNumberList;
private Connection connection;
private JTextField accountIDText,
usernameText,
passwordText,
tsText,
activeTSText;
private JTextArea errorText;
public Accounts() {
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
} catch (Exception e) {
System.err.println("Unable to find and load driver");
System.exit(1);
private void loadAccounts() {
Vector v = new Vector();
try {
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery("SELECT acc_id FROM acc_acc");
while(rs.next()) {
v.addElement(rs.getString("acc_id"));
rs.close();
} catch(SQLException e) {
displaySQLErrors(e);
accountNumberList.setListData(v);
private void buildGUI() {
Container c = getContentPane();
c.setLayout(new FlowLayout());
accountNumberList = new JList();
loadAccounts();
accountNumberList.setVisibleRowCount(2);
JScrollPane accountNumberListScrollPane = new JScrollPane(accountNumberList);
//Do Get Account Button
getAccountButton = new JButton("Get Account");
getAccountButton.addActionListener (
new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
Statement statement = connection.createStatement();
ResultSet rs = statement.executeQuery("SELECT * FROM acc_acc WHERE acc_id = " + accountNumberList.getSelectedValue());
if (rs.next()) {
accountIDText.setText(rs.getString("acc_id"));
usernameText.setText(rs.getString("username"));
passwordText.setText(rs.getString("password"));
tsText.setText(rs.getString("ts"));
activeTSText.setText(rs.getString("act_ts"));
} catch(SQLException selectException) {
displaySQLErrors(selectException);
//Do Insert Account Button
insertAccountButton = new JButton("Insert Account");
insertAccountButton.addActionListener (
new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
Statement statement = connection.createStatement();
int i = statement.executeUpdate("INSERT INTO acc_acc VALUES(" +
accountIDText.getText() + ", " +
"'" + usernameText.getText() + "', " +
"'" + passwordText.getText() + "', " +
"0" + ", " +
"now())");
errorText.append("Inserted " + i + " rows successfully");
accountNumberList.removeAll();
loadAccounts();
} catch(SQLException insertException) {
displaySQLErrors(insertException);
//Do Delete Account Button
deleteAccountButton = new JButton("Delete Account");
deleteAccountButton.addActionListener (
new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
Statement statement = connection.createStatement();
int i = statement.executeUpdate("DELETE FROM acc_acc WHERE acc_id = " +
accountNumberList.getSelectedValue());
errorText.append("Deleted " + i + " rows successfully");
accountNumberList.removeAll();
loadAccounts();
} catch(SQLException insertException) {
displaySQLErrors(insertException);
//Do Update Account Button
updateAccountButton = new JButton("Update Account");
updateAccountButton.addActionListener (
new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
Statement statement = connection.createStatement();
int i = statement.executeUpdate("UPDATE acc_acc " +
"SET username='" + usernameText.getText() + "', " +
"password='" + passwordText.getText() + "', " +
"act_ts = now() " +
"WHERE acc_id = " + accountNumberList.getSelectedValue());
errorText.append("Updated " + i + " rows successfully");
accountNumberList.removeAll();
loadAccounts();
} catch(SQLException insertException) {
displaySQLErrors(insertException);
JPanel first = new JPanel(new GridLayout(5,1));
first.add(accountNumberListScrollPane);
first.add(getAccountButton);
first.add(insertAccountButton);
first.add(deleteAccountButton);
first.add(updateAccountButton);
accountIDText = new JTextField(15);
usernameText = new JTextField(15);
passwordText = new JTextField(15);
tsText = new JTextField(15);
activeTSText = new JTextField(15);
errorText = new JTextArea(5, 15);
errorText.setEditable(false);
JPanel second = new JPanel();
second.setLayout(new GridLayout(6,1));
second.add(accountIDText);
second.add(usernameText);
second.add(passwordText);
second.add(tsText);
second.add(activeTSText);
JPanel third = new JPanel();
third.add(new JScrollPane(errorText));
c.add(first);
c.add(second);
c.add(third);
setSize(500,500);
show();
public void connectToDB() {
try {
connection = DriverManager.getConnection(
"jdbc:mysql://localhost:3306/accounts?user=root&password=spider");
} catch(SQLException connectException) {
System.out.println(connectException.getMessage());
System.out.println(connectException.getSQLState());
System.out.println(connectException.getErrorCode());
private void displaySQLErrors(SQLException e) {
errorText.append("SQLException: " + e.getMessage() + "\n");
errorText.append("SQLState: " + e.getSQLState() + "\n");
errorText.append("VendorError: " + e.getErrorCode() + "\n");
private void init() {
connectToDB();
public static void main(String[] args) {
Accounts accounts = new Accounts();
accounts.addWindowListener(
new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
accounts.init();
accounts.buildGUI();
}

Hi,
Below is my PATH setting to the MySQL JDBC JAR added in the autoexec.bat file:
PATH C:\j2sdk1.4.1_01\bin;C:\mysql-connector-java-3.0.8-stable-bin.jar;%CLASSPATH%
Could you tell me where did I go wrong & how can I fix this problem?
FYI, I'm using a Windows XP platform.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\mysql\bin>net stop mysql
The MySQL service is stopping..
The MySQL service was stopped successfully.
C:\mysql\bin>mysqld.exe
C:\mysql\bin>net stop mysql
The MySQL service is not started.
More help is available by typing NET HELPMSG 3521.
C:\mysql\bin>net start mysql
The MySQL service is starting.
The MySQL service was started successfully.
I then tried initiating the MySQL client also on the same PC machine, but obtained the error below:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\mysql\bin>mysql.exe
ERROR 2003: Can't connect to MySQL server on 'localhost' (10061)
C:\mysql\bin>telnet localhost 3306
Connecting To localhost...Could not open connection to the host, on port 3306: C
onnect failed
C:\mysql\bin>
Could you or anyone else help me on this problem? I'm still a newbie with MySQL and JDBC.
Thanks in advance

"unable to find driver for this platform" at random restart? please help!

i cant get past this screen, right after the screen turns grey and i see the apple logo..... tried resetting NV ram, tried holding option and booting from my startup disk, tried starting from the installation cd, running disk utility and repairing permissions/disk repair how do i get past this?! ahhhgggg the only thing was i restarted and had a diskwarrior CD in the drive, heres the first bit of the error i get
Panic(cpu 0 caller 0x0043913f) : "unable to find driver for this platform :\ "ACPI\ " . \n"@/SourceCache/xnu-1228.15.4/iokit/kernal/IOplatformexpert.cpp:1407
debugger called: <panic>
Backtrace (CPU 0), Frame : return address (4 potential args on stack)

It happened the same to me; I wrote in other threads in the forum hoping somebody gives me any hint to fix the problem.
Andrea (andreadandrea<at>tele2<dot>it)

SIP Trunk error, Warning: 399 "Unable to find a device handler

Hi Guys,
I am new at this, but I am having some issues with connectivity over a SIP Trunk. By the way I am not sure if this is the right area to post this, but here we go. I have two CUCM 8.x cluster and I have a SIP trunk that connectes them both, at each end I have a Cisco 2900 series gateway with MGCP protocol. When I make an inbound call " lets say from side A to side B it failed", in the CCM trace I can see the following error " Warning: 399 Unable to find device handler for the request received on port 5060 from".
I would appreciate some help on this, I am not sure what to look for......

Hi,
For testing reasons can you do the following
Create a callmanager group that contains all the nodes in the cluster. Then create a device pool with this callmanager group and assign this device pool to the SIP trunks.
Do this on both cluster.
Reset the trunks and see if you still have ny problems.
Thanks!
Christos

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

Power book not loading (error: unable to find driver for this platform) help me please

power book not loading (error: unable to find driver for this platform) help

That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install.

Unable to find type[ ]: make sure that the assembly containing this type is loaded.

I created an Enum, and while trying to run it by running the command [MyNamespace.MyEnum], I get the error that says
"Unable to find type[MyNamespace.MyEnum]: make sure that the assembly containing this type is loaded." This is what my enum looks like
$enum = "
namespace MyNamespace
public enum MyEnum
value1 = 0, value2 = 1
Add-Type -TypeDefinition $enum -Language CSharp
Does anyone have an idea why I keep getting this error? I really appreciate the suggestions. Thanks.

Thanks for that feedback Peter Ziganki....I actually just got it to work as well. I had to run the code first to load it before running that command. Sorry I am new to PowerShell, so am making serious newbie mistakes:)
Thanks.

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. Error message: Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBB

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

"Airport was unable to find your base station after restarting"

Trying to connect AX to my HP printer for wireless printing. Walk through the process of joining my wireless network, everything appears to work (finds my base station, finds my wireless network). When I finish the final step, macbook appears to hang but then comes back with this error message "Airport was unable to find your base station after restarting"..."problem rejoining the wireless network or finding the base station". I then go into Airport Utility again and base station is gone. I have to reset AX to factory setting (removing any profiles) before Utility recognizes AX again. I repeat process...same results, ugh. Any help would be appreciated.

I updated to 7.3.1, and just wasted 3 hours getting my Airport Express working again. What a nightmare.
Flashing amber light after update to 7.3.1 and not found by Airport Utility. Hard reset allows Airport Utility to find it, but after configuration never found again and get flashing amber light, until hard reset again...
Here are the steps that worked for me to get back to 7.3. and functional Airport Express.
1) I had ethernet connected, I was unclear whether ethernet doing anything but desperate. Performing reset from MacBook with airport on.
2) Hard reset on Airport Express so that Airport Utility can find it. (i.e. press reset button for 5-10 seconds until light flashes amber 4 times. The factory reset did not seem to work.)
3) Cross fingers that Airport Express shows up in Airport Utility. (Did most times for me, but not always.)
4) Hold down Option key and select Check for Updates from Airport Utility application menu. This allows selecting old updates.
5) Download 7.3.
6) Click Manual Setup (for the Airport Express)
7) Select Upload Firmware from the Base Station menu
8) Select 7.3, apply, cross fingers
After applying 7.3 may need to do one more hard reset, I am not sure if it showed up again on its own. However, once available in Airport Utility and once again with the 7.3 firmware, was able to configure and get working again as normal.
Apple link with tips for firmware and Airport Utility:
http://support.apple.com/kb/HT1218

SIP - Unable to find load - Constant restart

Similar Messages

Maybe you are looking for