SIP VoIP Settings energy consumption under 3G Vs W...

Hi everybody.
I'm suffering big pain with "SIP VoIP Settings" (SIP_VoIP_3_x_Settings_v2_0_en) because eats my E52 battery in a while (few hours).
The fact:
E52-1: 054.003.280.1 RM-469
Stand by mode under my 3G: 20 mWatt (5 mA). Figures are averages of one hour took with: Nokia_Energy_Profiler_v1_2_en.
Connection with my VoIP provider using "SIP VoIP Settings" under my WiFi: 41 mW (10 mA)
Connection with my VoIP provider using "SIP VoIP Settings" under my 3G: 297 mW (107 mA).
The ratio between 3G and WiFi is 8-10 times!
Nokia is aware of this issue (cfr. http://www.google.it/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=3&ved=0CEUQFjAC&url=http%3A%2F%2Fr...) and I wonder if 5 years later there is a solution to it.
Anybody has an idea about obtimal configuration of "SIP VoIP Settings"?
Best regards.
GN

Hi eveybody, an add on to my post.
Regards.
Attachments:
Compare results energy SIP VoIP.pdf ‏54 KB

Similar Messages

  • Sip voip settings

    hi, i am having difficulties making internet calls to mobile/landline/international numbers. I have no difficulties in registering my sip account and making internet calls to other sip account holders. What I notice is that for any internet calls domain name is also appended, for ex [email protected]. I am using nokia E63.
    Any suggestions please

    Hi eveybody, an add on to my post.
    Regards.
    Attachments:
    Compare results energy SIP VoIP.pdf ‏54 KB

  • Error downloading SIP VOIP settings application

    Hello!
    I have a n85 and I've tried to download the SIP voip app 3.x from
    http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...
    and it always give me an error.
    Is it possible that someone who downloaded it correctly could send it to me?
    Thanks!

    If your office network is behind a firewall that blocks the ports that are necessary for correct operation of SIP then there's nothing you can do to get it working properly. At least not directly.
    What you can try is using a 3rd-party application such as fring. Fring allows you to set up a generic SIP session with the VoIP provider of your choice. You connect to fring's systems over a single-port, proprietary connection, and fring connects to your SIP provider instead of you.
    It's obviously not as good as a direct connection between you and the VoIP provider but at least it works. I'm more or less forced to do that now with the N96 having no other real SIP support.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Voip settings disturbing gsm call.

    Hello !
    I've installed voip settings application on my n85 and set up a sip profile and it's working pretty good.
    I activate this profile whenever i need it via the contacts application.
    But everytime i'm having a phone call via the gsm network, the phone connects to the internet (arrows below 3G) even if my sip profile is not activated.
    It stops doing this if i delete the sip profile.
    So what data are being exchanged when i'm having a simple gsm call ?
    And is it possible to stop this (other than using fring...)
    Thanks a lot ;-)

    I recommend you visit the following page:
    http://www.developer.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Se...
    more info here:
    http://www.developer.nokia.com/Resources/Tools_and_downloads/Other/SIP_VoIP_settings_applications.xh...
    Here is also the manual for SIP VoIP Settings User Guide v1.1
    http://www.developer.nokia.com/info/sw.nokia.com/id/c8824cfe-fff7-4fde-af62-da21a8938de2/SIP_VoIP_Se...
    and also SIP VoIP 3.x Settings v2.0
    http://www.developer.nokia.com/info/sw.nokia.com/id/b1c361a2-7eb2-4853-8c0c-d2f54e184237/SIP_VoIP_3_...

  • E52 - Nokia SIP VoIP application - help needed

    Hi there,
    I am pretty new here.  I need the Nokia SIP VoIP application for my E52, something like SIP_VoIP_3_1_Settings_S60_3.... .sis
    Where can I get it?
    My problem is, that I can set up easily an VoIP service with my phone and it connects perfectly.  However, I can't use it with my E52 since I can't activitate it on my phone.  I would need the option:  > connection > Internet Tel. Settings   which is not there.
    I guess I need the Nokia SIP VoIP application, however I can't find a compatible version, and the SIP_VoIP_3_1_Settings_S60_5_x_v1_0_en.sis does not work.
    Thanx
    Caristeo

    Although I've never used it, I was able to install the SIP Settings program for my E73 (same OS and Feature Pack as your phone) from http://www.developer.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Se... .  (You need to make an account if you don't have one already.)  Download the "SIP VOIP 3.x" version.  I do have a Settings -> Connection -> SIP Settings option on my phone, as well as Control Panel -> Net Settings -> Advanced VOIP Settings.  Hope that helps.

  • VOIP: SIP VoIP 3.1 Nokia Suite begins install, E71...

    I have a Nokia E71 and would like to begin using our wifi to make calls, (our carrier signal is week/dropped calls/connection on-hold). When I try to install the file, SIP_VoIP_3_1_Settings_Symbian_3_v1_0_en, Nokia Suite begins the installation, says to continue on phone, phone pauses and then a red screen appears, "File Corrupted".
    Can you help?

    @oneofmarysboys
    You are trying to install a version for Symbian S^3 devices, click on the blue upturned arrow head to reveal the other available versions of which you require SIP_VoIP_3x_Settings_v2.0_en.sis (164 kb).
    Once installed you may like to look at this resource:http://mywebexperience.com/voip/sip-call-settings-for-e71-voip-calls-through-your-nokia-mobile/
    Happy to have helped forum with a Support Ratio = 42.5

  • E52 - Advanced VoIP settings 3.x v2 - VoIP service...

    E52 - Advanced VoIP settings 3.x v2 - VoIP service profile settinsg unavailable
    Hello,
    I have Nokia E52 with firmware 091.003, with installed VoIP advanced settings 3.x version  2.0.
    My problem is that I have unavailable Profile settings in VoIP services menu ( with SIP profile defined)
    to set WMCMDA(?)  ON to use 3G.
    Factory reset of settings neither reflashing of FW by Nokia OVI suite did not help.
    My previous E52 ( stolen from me ) with FW 07x.nnn or older had  it available......
    Do anybody know, or has clue, about the reason and solution ?
    I use Nimbuzz 3rd party VoIP, that works great on wifi/ 3g and even Edge,
    but for some reasons is cancelling voice after 65 s of the call....
    Poutnik

    BTW, I would not believe how deletion of extra VoIP service can ruin Nokia Connection destination/target (?) groups, so Nokia is not easily able to access internet.
    E.g. Opera mini, instead of list of variable APs starts t offer just
    System Default and
    Always ask,
    but none of them is usafull, because even Always ask fails, never asking me....

  • Sip server settings Nokia E63

    Hi, I want sip settings of actionvoip in my Nokia E63 i wanna make new server profile plz help me if every one know this problem... I shall b very thankful to you for that.

    I recommend the following steps for setting up your Nokia E63 for VoIP over Wifi (and perhaps for other S60 based phones as well), for Voip.ms, the realm settings were the same as the others:
    How to configure SIP profile in Nokia Eseries devices for VoIP calls?
    This text is a cut-and-paste from Nokia's FAQ.
    The Nokia Eseries mobile devices support SIP VoIP internet calls. This article describes a sample configuration when user authentication is enabled in the SIP proxy and registrar servers. The proxy and registrar servers are located in the same device in this sample.
    Before configuring the mobile device, the following information should be obtained from the SIP service provider (some other parameter values may also need to be checked if not using the default values):
    SIP proxy and registrar server address ("sip.voipservice.com" in this sample)
    SIP proxy realm ("inphone.com" in this sample)
    SIP registrar realm ("sip.voiceservice.com" in this sample)
    User name ("1234567" in this sample for both the proxy and registrar)
    User password ("1234")
    Public user name ("[email protected]" in this sample)
    In order to establish a VoIP call, a WLAN access point needs to be defined in the mobile device access point settings and the mobile device must be within the reach of the WLAN network.
    Start the mobile device SIP configuration by going to menu Tools > Settings > Connection > Sip Settings and by creating a new SIP profile. The following parameters are defined in the profile:
    Profile name: Siptest (can be freely chosen)
    Service profile: IETF
    Default access point: WLAN access point used for the VoIP connections
    Public user name: [email protected] (note that the public user name must be given in this format, including the domain name)
    Use compression: no
    Registration: when needed (set "always on" if you want the registration to occur automatically)
    Use security: no
    Proxy Server:
    Proxy Server Address: sip.voipservice.com
    Realm: inphone.com
    User name: 1234567
    Password: 1234
    Allow loose routing: yes
    Transport type: UDP
    Port: 5060
    Registrar:
    Registrar Server Address: sip.voipservice.com
    Realm: sip.voipservice.com
    User name: 1234567
    Password: 1234
    Allow loose routing: yes
    Transport type: UDP
    Port: 5060
    Note that the realm name is often the same for both the proxy and registrar but the name may also be different, as in this sample. If the registrar realm name is not correctly defined, the registration will fail. If the realm name of the proxy is not correct, the registration may succeed but the internet calls will fail.

  • High energy consumption (30W) on Tecra A4

    Hello!
    My A4's battery only lasts for about ONE hour when fully charged! NotebookHardwareControl shows an energy consumption of 30W. What is wrong?
    Cirdan
    p.s. I just recently bought this used laptop.

    Generally!!! If this statement is not true can you please give me some valid argument or concrete explanation how much energy need specific hardware component (CPU, graphic card, display ODD) in battery mode. I have found very interesting table under http://www.intel.com/support/processors/mobile/pentium4/sb/cs-007499.htm
    Ok maybe I am not qualified for this theme, but according some documents I have found on the net, power consumption of 10-15W is definitely unrealistic. Why you can work just one hour under battery power supply is probably because of battery itself. As far as I know Tecra A4 is about one and half year old and probably the battery condition is not the best one.
    Please dont compare your Tecra with small sub-notebooks with ultra-low processors and 12 displays.
    I have no other comments about that.
    Good luck!

  • Reg: Need to capture cost / energy consumption in process order

    Dear Friends,
    I need your valuable advices for one of the following
    I have a scenario where for one of the process , we are generating Energy(heat) in in-house b y burning coal.
    We are manufacturing steel Pellets , and it is continuous process at the end of the process these steel pellets are heated upto 1200DegC in furnace,
    and for this we are generating energy in in-house by burning Coal on the other side.Now i need to capture this energy cost in my process order. And also i need to have shift wise energy consumption report.
    So let me know how can i achieve this..?
    Can we achieve by defining is as an extra activity type..? if yes , please let me know how and also necesary formula to achieve this.

    1. Define New Std Value in your std value key. Say E0001
    2. Now Ask Costing person to Create New Activity Type say ENG01
    3. Now Decide how you want to calculate your Energy consumption will it based on you Order qty or It will based on the Machine run time.
    4 Now give the std values in Routing as per Operation qty or Machine Run time
    5. If is is based on Based on Operation Qty The formula will be
    ENG01 = (Order Qty x Std Value of Energy)/ Operational Qty.
    6. If it is Based on Machine run say 24 hr will burn 1000 joule
    Then formula will be =
    Machine run x Std value of Energy as in Routing.
    Take help of your Costing guy to arrive at the Formula.

  • Permanent low energy consumption mode in Lion

    Hi,
    Is there a way to make the machine always work in low energy consumption mode, no matter how much workload there is, like pre Lion machine?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Seeking information on new mac mini energy consumption -

    Hi,
    I live off-grid and my energy comes from a solar system. I am interested in assembling a relatively high a performance workstation that consumes the least power possible. I would like to run a 27" monitor, an external hard drive and some kind of computer. I am wondering if a mac mini with a viewsonic LED monitor and a micro external hard drive might be the ticket.
    Does anyone here know what the typical energy consumption for a 2011 mac mini is? I am not looking for idle or max power consumption but an average. What about mac monitors like the new 27 inch. I see it consumes a max of 250 watts when charging a laptop but what does it consume when the speakers are not connected and the monitor is hooked to a mac mini?
    How does a mac mini + external monitor compare to a macbook pro + an external monitor for energy consumption?
    Thanks,
    bob

    Hi,
    I live off-grid and my energy comes from a solar system. I am interested in assembling a relatively high a performance workstation that consumes the least power possible. I would like to run a 27" monitor, an external hard drive and some kind of computer. I am wondering if a mac mini with a viewsonic LED monitor and a micro external hard drive might be the ticket.
    Does anyone here know what the typical energy consumption for a 2011 mac mini is? I am not looking for idle or max power consumption but an average. What about mac monitors like the new 27 inch. I see it consumes a max of 250 watts when charging a laptop but what does it consume when the speakers are not connected and the monitor is hooked to a mac mini?
    How does a mac mini + external monitor compare to a macbook pro + an external monitor for energy consumption?
    Thanks,
    bob

  • MB usage for SIP-VOIP ?

    Does anyone have any experience on :-
    1. How much data (GPRS mega-byte) used per minute for Skype over FRING,
    2. How much data used for Google-talk
    3. Similar apps.
    I am using E71, with SIP-VOIP, GRPS, FRING, NIMBUZZ.
    Thanks for your help !!
    Harry

    Hello giliadw,
    Don’t wait for a built in function because that’s no where soon to be seen in near future. You should certainly contact a hosted PBX provider they definitely provide VoIP solutions for mobiles. You can simply function all the SIP tools through their application. I can recommend you my PBX VoIP provider The RealPBX, they have a decent phone application and services

  • Rss Settings link missing under Library settings?

    Rss Settings link missing under Library settings?
    Could you please help on the above?

    give Site Collection Admin privileges
    Also check below:
    http://webcache.googleusercontent.com/search?q=cache:YqNnUd4C1UYJ:jonnytreesonline.blogspot.com/2010/11/sharepoint-2010-rss-settings-missing-in.html+&cd=3&hl=en&ct=clnk&gl=in

  • N95 built in SIP/VOIP client.?

    Does anyone knws how to setup N95 built in SIP/VOIP client.?
    to make calls using WLAN.?
    Thanks
    Regards

    never mind

Maybe you are looking for