Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop
sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.
sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music etc back into my laptop , how can I do that. Also let me know how I can transfer the contacts into Windows contacts from I phone. Pl help
Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync. -
I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?
I asked same question
Any answers -
I have an iPod nano 1st gen. my system operative is windows vista . I just want to transfer all the music of my iPod to iTunes library like I was able to do it in the past I don't know what have change?
Thank you deggie to answer me . You know, I don't know much of computers and of technology but when I bought that ipod back when they came out 2005 I was able to download music from my CDs and from Youtube to itunes then transfer to my ipod and back and forth to itunes . Then if I had changed of computer I was able to transfer to that new computer.Why I'm not able to do it ? There is a program(Sharepod) that allow to do that but it cost $35.00 but I thought that was free or it is because that now I have to buy from itunes only?
-
my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!
If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select? -
After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
What should I do?Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?
-
my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps. -
Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.
Sorry...downgrading is not supported.
-
I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?
Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers
-
Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00? It only shows 1:00 and there is no way to change the time to 1x:00.
Ok well you need to get your facts straight. You say the reason to upgrade to OS 4 but half of these have to do with the new iPhone 4 and not the OS. Two totally different issues
-
What do I do. I just turned my iPod touch 5 on for the first time in about two months and it telling me that it is disabled for 23,079,134 minutes please help anything would be good I also have not backed it up for a while now
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
How to tell if column value has changed for use in workflow actions
Hello,
I am using Sharepoint 2010 and for one of my Lists, I am using a general list workflow. What I need to be able to do is determine if a column value has change (say an "Assigned To" field) because I only want to take some action if that particular
value has changed. I want to be able to have a workflow action that would be something like:
If Current Item: Assigned To not equals [OLD VALUE]
I have found some web searches that talk about creating a duplicate list or duplicate (but hidden) column but that doesn't seem to be the way to go. I have document versioning set but don't if that can be used to help with this. One possible
thought (although I haven't tried it to see if it works) is to create local variables and have the values in the variables be the "old value". Just not sure if there is a best practices for doing this.
Thanks for any thoughts - PeterHelen,
Not sure I fully understand your goal. We don't use "tasks" at all but if you are looking to have your workflow check certain valus and be able to send email messages to people based on whatever, then you can certainly do that (as long as your Sharepoint
has the email setup. We do this for alot of workflow tasks.
So, in the workflow you can have a blanket statement like what I previously listed:
if Current Item:hiddenStatus not equals Current Item:Status
.... do something
or you can do something like:
if Current Item:hiddenStatus equals "In-Progress"
.... do something
Else if Current Item:hiddenStatus equals "Completed"
.... do something
or combine the two and do nested "if" statements. Then you add an email statement wherever you need it like:
if Current Item:hiddenStatus equals "Completed"
then email "these users"
To add the email part, just type in "email" on the line where you want to add a statment. There is only one option to choose from. That will display the line "then email these users". The "these users" will be a link. When you
click it you will get a popup to add the email info. We typically will send the email to a user (or users) that are already listed in one of the PeoplePicker fields. On the email form, you can type in your own text, designate that a value is based
on a column value (like our PeoplePicker), designate that a value is based on a workflow variable, add a link to the current item, etc. To get to these options you will click the button to the right of the fields or use the "Add or Change Lookup" button
in the bottom-left for the text area. There is alot you can set in the mail.
Does this help answer your question?
- Peter -
Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!
If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter -
Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate
Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.
-
If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?
She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.
Maybe you are looking for
-
How can i change a paid app from an Apple ID to other different Apple ID?
Hello, When i puchased my Ipad 2 i purchased a couple of paid apps for my little daugther, however due the damage she caused to my device, i decided to buy a new ipad. I need to keep my Apple ID intact and thats why i have created a new one for my wi
-
IGoogle doesn't display properly
Hello all, Yesterday, all was fine. Today, my iGoogle page won't display properly (running Safari - OSX 10.3.9 Panther). Get a notice that: 'Home tab has been sent. Sending failed.' Brother Mac running Panther has same problem. Page displays properly
-
How to download photoshop cs6 free
how do you download photoshop CS6 for mac 10.6.8 free?
-
HT1218 connecting a second airport express on my system
I got a second airport express as a gift (2007) and my airport extreme do not see it. My first one works fine. How should I connect it ? I tried using an ethernet cable, I tried Wi-fi. .....nothing. Thanks.
-
Please help me troubleshoot...
I run a K7N420 Pro board (BIOS 2.8) and I've been experiencing more and more lock-ups and blue screens of late. The usual blue screen warnings I get are kernal_stack_inpage_error and irql_not_less_or_equal (I'm not sure if that is the exact wording).