Siri and time zone error

Hello.
I live in Moscow (Russia) and I've bought iPad Mini here.
When I ask Siri to create a meeting for example at 5 p.m. she creates it at 6 p.m.
I think this problem connected with Moscow time zone changing from +3 to +4.
I have checked and changed all possible time and location settings but I have no any results.
Do you know something about this problem?

after a strucking with the error for long time..it got resolved..
check the time zones present in your db...
suppose if u have alaska in your db..den its gmt is -9.00..
so add -Duser.timezone="-09:00" in java options for project...
right click on the project->properties->run/debug/profile->select ur profile->edit->java otpions
dont forget to restart the jdevloper for above change to take its effect

Similar Messages

Time zone error at Icloud

There is a bug in the Icloud which I need support.
When I add a new event in the Iphone or Ipad, it is uploaded to Icloud correctly.
But when the Outlook downloads it, Outlook 2012 receives the event one hour earlier.
It creates a huge confusion.
Apple should fix it because it is a primary time zone error.
Can anyone help me?
Br
Kaio

open the file "setDomainEnv.cmd"
This file is located in the <middleware_home>\user_projects\domains\<domain_name>\bin
search for this line
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -and add at the end of the line this
-Duser.timezone=ESTnow the lines should be like this
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag% -Dweblogic.http.enableRemoteUserHeader=true -Duser.timezone=ESTrestart the weblogic and try again

Sales Office Master - Country, Region and Time Zone

Dear All,
In one of the Project, for some config-settings, I need to create Sales Offices. Here, Sales Offices is basically the Countries, to which business is happening.
For example,
Jordan
Mexico
Colombia
etc...
Now, while maintaining Sales Office records, System prompts for Sales Office Address. Initally, i maintained Country as per the Sales Office, for example:
For Sales Office Nepal, Country Nepal
For Sales Office Mexico, Country Mexico
etc...
Now, when i checked previously maintained entries in to System, I found that:
For Sales Office New Hampshire, Country India
For Sales Office California, Country India
etc...
When, I inquired about the same to concern Persons, within particular Organization, they are unable to explain, as these entries are maintained by Previous Implementation-Partner.
Can anyone explain, what entry needs to be maintained as Address - Country, Region and Time Zone, for International Offices? Is there particular logic for the same?
Best Reagrds,
Amit

Dear All,
Thanks for the Support, provided.
Let me explain, my scenario, in detail.
I am maintaining Profit Center, in Sales Order, based upon Substitution Rule.
For that, I have to maintain Profit Center, based upon Sales Area and Sales Office combination.
suppose, If my combination is:
1. if Sales Area is 10100107 and Sales Office is Colombia, then Profit center would be X
2. if Sales Area is 10100107 and Sales Office is Mongolia, then Profit center would be Y
Now, Important aspect is all Sales Organizations are maintained under Company Code ABC; and Company ABC is maintained under Country INDIA. Whereas, Sales Offices are both, Domestic, as well as International.
My queries are:
1. What effect has gone be made, if Sales Org is maintained under India and Sales Office, under some other country, in Sales Order?
2. Also, based upon Sales Office, System must pick the Transaction Currency, in Sales Order?
Best Regards,
Amit

Re: (forte-users) DateTimeData and time zones, I need amagictrick !

You might try externalizing as textdata whenever its passed between partitions.
kelsey.petrychynsasktel.sk.ca on 04/26/2000 03:45:28 PM
To: "Guylain Rochon" <GRochonInfluatec.ca>
cc: kamranaminyahoo.com (bcc: Charlie Shell/Bsg/MetLife/US)
Subject: Re: (forte-users) DateTimeData and time zones, I need a magic trick !
I haven't done a lot of work with time zones, but I have some ideas that just
may work. If it is important for this object to pass in and out of time-zones
untouched by the destination try passing it by reference. The idea is that the
actual object will remain in one time zone. You may need to "anchor it down"
somehow where it resides (Make it private, READ_ONLY or ??).
Another thing to try is: If it is passed via a method set the mechanism as
"input". I believe this will stop the destination from changing it. (i.e. It
will receive it as input only).
Just some ideas. Good luck.
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
Guylain Rochon <GRochonInfluatec.ca> on 04/26/2000 01:15:47 PM
To: "\[FORTE\] Maling list" <kamranaminyahoo.com>
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) DateTimeData and time zones, I need a magic trick !
Help, I'm drowning and Fort

I haven't done a lot of work with time zones, but I have some ideas that just
may work. If it is important for this object to pass in and out of time-zones
untouched by the destination try passing it by reference. The idea is that the
actual object will remain in one time zone. You may need to "anchor it down"
somehow where it resides (Make it private, READ_ONLY or ??).
Another thing to try is: If it is passed via a method set the mechanism as
"input". I believe this will stop the destination from changing it. (i.e. It
will receive it as input only).
Just some ideas. Good luck.
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
Guylain Rochon <GRochonInfluatec.ca> on 04/26/2000 01:15:47 PM
To: "\[FORTE\] Maling list" <kamranaminyahoo.com>
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) DateTimeData and time zones, I need a magic trick !
Help, I'm drowning and Fort

Since loading mavericks my calendar posts events one hour late. That is, if mtg invite is for 9am it posts at 10am. my pc clock and time zone are correct.

Since loading mavericks my calendar posts events one hour late. That is, if mtg invite is for 9am it posts at 10am. my pc clock and time zone are correct.

Hey Armando Stettner,
Thanks for the question, and what a great question it is!
With time zone support on, you can edit an individual event and change the time zone for that event. This list will include options for your default time zones, UTC, and "floating" - the latter of which is what you are looking for. Floating changes the event to occur at the specified time, local time.
For information on changing an event's time zone, see the following resource:
Calendar: Change an event’s time zone
http://support.apple.com/kb/PH11531
I look forward to hearing how this works for you.
Cheers!
Matt M.

ISE 1.3 - Multiple ADs and time zone

Hi all,
I have a question regarding time zone settings, AD interaction and ISE PSN.
Assuming the following deployment:
- ISE distributed deployment with 3
- Each PSN is joined to a AD at a specific site (example: one in USA, one in Europe, one in Asia)
If the DCs at each site have different clocks (same UTC time source, but different time zone) I'll probably run into issues, right?
Because:
First fact:
Set correct time and timezone. Kerberos needs to be within 5 mins of the DCs you use
(Source: Cisco Live Breakout BRKSEC-2132)
Second fact:
Also, it is important to have all the nodes in a single ISE deployment configured to the same
time zone. If you have ISE nodes located in different geographical locations or time zones, you should
use a global time zone such as UTC on all the ISE nodes.
(Source: ISE 1.3 admin guide)
So the first recommendation is, that the ISE PSN has the same clock as the local DC - on the other hand the time zones in one distributed deployment should be the same on all nodes.
What to do?
Big thanks in advance!
Johannes

Not yet - In my lab environment I'm not having a multi-tier CA (and I'm not very good when it comes to Microsoft Active-Directory stuff :) )
Edit:
I did one very limited test in my testlab. In my testlab I'm having one DC and two ISE appliances.
Test1: I removed the AD join of the ISE appliances. The ISEs are configured for CET and I reconfigured the time zone of the DCs to UTC-7:00.
ISE and DC clocks are correct (synced against NTP), but the absolute time is different due to different time zones.
Then I joined the ISEs again - and it worked.
Test2: I removed the AD join of the ISE appliances. The ISEs are configured for CET and I configured an incorrect static time to the DCs (some weird time).
ISE join won't work
Error Description: Clock skew detected with active directory server
Support Details...
Error Name: LW_ERROR_CLOCK_SKEW
Error Code: 40087
Perfect - different time zones are obviously ok...

Customer Master Time zone error

I am getting the following error in customer master upload.
"No time zone could be determined for country CS region CS postal code 1210"
Kindly provide solution to resolve.

Is there a long text for the message? What is the message id and number?
Have you defined region CS in country CS?
Rob

Daylight Savings Time and Time Zone Issue:

Howdy! Many of us woke up this morning to be dismayed to find that our iPhone was TWO hours behind instead of falling back one for the Daylight Savings Time adjustment, and were late for church. I have an iPhone 4S, with iOS 5...
I was working at that time of morning, and the initial switch went well. However, when I woke up, the clock was yet another hour behind. A little investigation showed that the Time zone had been changed to Denver (It was previously on Chicaco, and I live in Dallas.) I tried to select it to change it, and it wouldn't allow me. If I turned off the Set Automatically feature, then I could change it, but when I turned the Set Automatically feature back on, it would re-set the time zone to Denver.
I found another thread where they discuss this:
https://discussions.apple.com/message/16644669
To fix this, put in airplane mode, then back out again, then re-choose your correct time zone. If this doesn't work, then try turning your phone completely off and then on again. Thanks to 4n6doc for the tip!
The airplane mode trick worked for me: I turned airplane mode on, then off, then went to the Date & Time and set my time zone to Dallas, TX while the Set Automatically was off. When I turned the Set Automatically back on, it changed Dallas to Chicago, which is what every iPhone iOS I've ever had has done.

Hi,
Yes this is a correct way to fix the issue. One thing however, how did you set the timezone? For correct daylight saving handling, you'll have to use the long version, like America/New Yorw, NOT GMT-5 (for example).
regards,
~ Simon

ICal and time zone stamps?

Apologies that this is long. It's three questions about trouble I've recently encountered using iCal.
I imported 80+ appointments into iCal from a .ics file created by Oracle Calendar.
1. The .ics file did not contain any time zone info, and iCal associated each of the imported appointments with GMT, despite the Mac's zone set to "Denver" in the Date & Time preference pane and iCal's time zone set to "America/Denver". Why doesn't iCal associate unassigned appointments with its own time zone?
2. Each of those appointments appeared in iCal at the correct local time, despite being associated with GMT. That is, with iCal's zone set to "America/Denver" I would have expected an item imported as, e.g., 10:00 GMT to show up at 17:00 in the iCal window. But none of them did--they all appeared as if they were MST, but with GMT stamps, and I don't understand why.
3. I didn't actually find out these items were associated with GMT until after I synced with my Palm Tungsten E. All of the items imported as GMT were shifted 7 hours on the Palm. So I went back to iCal and for each and every one of the imported appointments I changed the time zone to "floating" and then "America/Denver". (If I went straight from GMT to MST the appointment jumped 7 hours back in time, and I got tired of this.)
After that process, every event in iCal was associated with MST. I then synced with the Palm and found that, to my surprise, the imported events still showed up on the Palm as if they were GMT, i.e., shifted forward 7 hours. I should add that I didn't merge, I told the sync conduit to erase the Palm's contents.
Back to iCal. I used "Back up Database..." and "Revert to Database backup...", then sync, telling conduit to erase Palm's contents. No change.
Back to iCal. I select one of the troublesome events, "cut" it to the clipboard, and then paste to bring it back. After a sync that one event shows up correctly on the Palm, i.e., as MST as intended.
The question at the end of a long #3 is, if an event is imported with the wrong time zone stamp, why does it retain that stamp despite being manually changed to a different time zone?
I know the knowledge base has an article on incorrect time zone stamps, and that a possible fix is to export the entire database and then import to a new calendar. I didn't find this out until recently, and it doesn't address iCal's behavior so much as provide a workaround.
PowerMac G5 DP 2.0 GHz Mac OS X (10.4.4)

After looking more closely at the .ics files exported by Oracle Calendar I see that events are exported as if they were GMT; iCal is, indeed, showing the appointments at the correct local time. This makes my first two questions irrelevant.
However, question #3 still remains: why or how does the original GMT stamp persist after manually setting an event's time zone to local time, "America/Denver"?

ICal and Time Zone

I have a problem with iCal.
In iCal time zone shows as a "CENTRAL EUROPEAN TIME" which is wrong. There is the an option to change (Other) that but it does change anything. When i try to change it goes back to "CENTRAL EUROPEAN TIME" again.
On the other hand In my preferences, my time zone shows as "WESTERN EUROPEAN SUMMER TIME" which is correct.
When i send an iCal, the recipient receives two hours in the invitation.
I can i solve this problem?
greetings,
Paulo

It will send in the timezone of your location in preferences. You can verify this by sending an appointment to a web mail account, and then downloading the attached ics file and opening it with text edit. You'll be able to see exactly what Timezone it is sending.
Message was edited by: fishdan

ICal events and time zone change

Has anyone scoped out what happens to iCal events when your MBP moves between time zones and automatically changes the date and time settings? In general, I'd like my calendar events to be fixed at the time in the time zone where they are supposed to occur, and not where the MBP is, but of course I'd like the MBP to be telling me the time where it actually is. I don't think iCal does it this way, but I'm not sure how it handles time differences. Anybody know?

In iCal preferences, there is a check box for "turn on time zone support." If you leave it unchecked, iCal will automatically adjust to your current time zone and move the events forward/back by the appropriate number of hours. If you check "turn on time zone support" a drop-down menu will appear at the upper right of the iCal page allowing you to select the time zone you wish to view. In this mode, iCal does not automatically move the events unless you select a new time zone manually. Does that make sense?

Calendar and time zone issue

When i get an invite from our west coast office for meeting at 1 pm west coast time and i accept here in east coast time it ends up at 1 pm east coast time instead of adjusting for the three hour difference. any suggestions?

Me too with the same problem. If I move to a different time period (say from Week to Day) after changing the displayed time zone, it does refresh.

LG G3 Time Zone Error

I downloaded the Lollipop update on April 14, and ever since, my phone keeps jumping to the wrong time zone. It goes between 4-7 hour ahead of the correct time. It'll go back to the right time if I restart it but it'll jump ahead again either immediately or after a few hours. Any suggestions?

What type of resolution can we expect when you haven't asked the people impacted by the problem any troubleshooting questions?
This response to an issue "Oh no njbattaglia! I want to make sure you have the right time!"...I get that it is an attempt at being personable in text form; it's not helpful and doesn't seem professional. An equally unhelpful kick-off to a discussion would be
Like I said in the response to missmoushie experiencing this problem, deductive reasoning would bring the average person to the Date & Time settings. So referring us to an article on HOW to check the date and time settings is just a baby step is resolving this problem. Assume we've all read the article, the settings are correct and it is still broken, now what do you suggest?
Wouldn't your technical team need to know when did it start happening?
How often does it happen?
Where is it happening?
Have you tried rebooting your phone?
Did it continue to happen after rebooting your phone?
Did you check the settings to make sure the Auto-date & Time and Auto-time zone boxes are both checked?
Are they correct?
Did it continue to happen?

Automatic time zone error

Out of the blue automatic time zone shows that I reside in Seoul-Korea when I'm actually in Jakarta-Indonesia. It messes up the date and time as a result. It works just fine before yesterday.
Anybody knows what happen?
The solution is quite I easy, I just turn the automatic time zone off and set my location manually.
Thanks, logamberat.

This is happening to both my spouse (TURBO 32GB) and I (TURBO 64GB). The first time she noticed was three days ago. Her phone was correct at home (Pacific time zone), but when she got to Seatac airport, her phone was in Alaska time zone. Yesterday, I went downtown and my phone's time went back an hour and the time zone was set to Alaska. At home, it is correctly set to Pacific with correct time. It is correct right now, but her's is wrong right now (she's downtown). Seems like something wrong in the information the phone is receiving off the network, but could it be the phones? This wasn't happening a week ago. Thanks for any thoughts.

Location Manager and Time Zones Feature Request

I use my Powerbook for consulting - and travel extensively.
Location Manager handles my network setups, but, to the best of my knowledge, NOT the time zone information.
I'd like to have the option to set the time zone from my location manager, so that when I get to a customer site, and attach to the network, files, iCal, Mail, and other timestamped files are correctly in sync with the location.
I could probably write an automator script to do this, but it would be best supported directly in Location Manager.

Hi, Kirk. Welcome to the Discussions.
For Mac OS X feature requests, submit a Mac OS X Feedback. These Discussions are user-to-user communications only. Feedback is the formal mechanism for submitting feature requests.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Siri and time zone error

Similar Messages

Maybe you are looking for