Siri auto-dictation won't insert a period in message.  It spells it out. Other punctuation works fine.

If I use auto-dictation to speak directly to Siri, a period will be inserted appropriately.  In any other format, Siri spells out the word rather then inserting a period.

Ok, that is strange. Language is set to United States English in both Siri and in general. However, saying full stop gets me a period. So it's a work around if not a fix.

Similar Messages

  • When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1398 Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    You can't change it - just try aagain. 
    https://discussions.apple.com/index.jspa
    Where you find these options:
    Notebooks
    MacBook Pro
    MacBook Air
    iBook
    MacBook
    PowerBook

  • When I ask Siri the stock price for MBL (other codes work fine), my iphone 5 crashes - does this happen to anyone else?

    When I ask Siri the stock price for MBL (other codes work fine), my iphone 5 crashes - does this happen to anyone else?
    It doesn't shut down completely, but mid-response the Apple shows and then it pops up to put in my pin.

    Nope nothing yet - a few friends have true it and have the same reaction."

  • Javascript won't load for this one website that I frequent. This just started today. All others websites work fine. This site works fine in IE...

    Javascript won't load for this one website that I frequent. This just started today. All others websites work fine. This site works fine in IE. I've tried Safe Mode with no success. I have changed nothing since yesterday. Any help is greatly appreciated.

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache Clear Cookies & Cache]
    * [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
    * Make sure that you are using the '''"Remember History"''' setting as described in this article -> [[Options window - Privacy panel]]
    Also see these articles:
    * [[JavaScript]]
    * http://kb.mozillazine.org/JavaScript
    Check and tell if its working.

  • Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    After the restore did the phone work properly for a while? Say, a day or so?
    If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
    If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
    Good luck

  • My ipad just won't let me enter my apple password on FaceTime or iMessage, it works fine on my iPhone, I have tried numerous things but nothing works, can anybody help please, will a bug fix sort this out when they finally make one

    My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing  works.  Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • I have an iPod Touch with 5.0.1 and iTunes with 10.5.1.42, and the problem is the syncing process. One of my videos won't get synced not matter how much I try. Other videos works. Any tips?

    My iPod is the 3rd generation and it is running 5.0.1, and the iTunes I use is 10.5.1.42 for Windows. When I started syncing my iPod to include one video, iTunes will work fine, but when it is finished, I checked the videos on my iPod and found out there wasn't. I went to the iPod section, and under the movie subsection, I even clicked the video I want to be synced, and clicked on APPLY, then sync. When I tried doing it over the air, or usb, it just won't work. The diagnostic for iTunes says it was all right, nothing wrong is going on. I rebooted iTunes and my iPod several times, nothing! Any tips!???

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • When I insert an SD card into the iMac nothing happens.  It worked fine until today, I double clicked on the card icon on the desk top and it disappeared! Any suggestions?

    When I insert an SD card into the iMac nothing happens.  It worked until today, when I double clicked on the SD card icon on the desktop and then it disappeared!  Cannot find in "Finder".  iPhoto does not open upon inserting card.  Reformatted card with device (camera).  Used Time machine to restart computer before the double click occurence...did not lhelp.  Any suggestions?

    Have a look in Finder Preferences: Click on the desktop, Finder>Finder Preferences.General tab - is there a tick in "External Disks'? If not, tick it.

  • My MG8120 won't print wirelessly from my MacBook running OS 10.9.5. Works fine with HP printers.

    My MG8120 won't print wirelessly from my MacBook running OS 10.9.5 (Mavericks).  It works fine with all of the other HP printers in the office.  Another user has the same problem with her PC running Windows 7.  And she, too, has no problems printing on the other HPs.  I or she cannot print to any of three Canon printers in the office. 

    Hi,
    Please try the following steps,
    Download every updates from Apple and HP
    Reset or Delete the printer from your mac (it may work trhough USB)
    Reset all settings into default settings on your printer
    Turn off or unplug mac, printer, modem, router
    Plug everything and reboot all
    Reconnect the printer to home wifi network and mac also reconnect to the correct network
    I work for HP. I am speaking for myself and not for HP.
    Say thanks by clicking the Kudos Thumbs Up in the post.
    If my post resolved your problem, please mark it as an Accepted Solution

  • When I insert a picture CD, it states I inserted a blank CD. Music CD's and DVD's work fine. Any solutions?

    I tried another Macbook Pro, as well as an external drive, and the picture CD works fine. Why would it state that I inserted a blank CD?

    Its also possible, ....seen it countless times,.......that the CDR media you inserted isnt one that can be read from by your Superdrive,......burn pics to a more standard CDR media......Sony, or Verbatum.
    Youd be shocked at the multitude of odd read/write layered variety of CDR and DVDR out there.  No DVD player or burner can "see" them all...........worse still write to them.

  • When i plug my brand new iPod into my macbook it won't sync and says usb disabled because its using too much power, worked fine when i first synced it yesterday

    when i plug my brand new iPod into my macbook it won't sync with iTunes and says usb disabled because its using too much power. it worked fine all this week when i first got it

    Might want to have your MacBook looked at.

  • Firefox updated yesterday and now it won't load any webpages. Have reviewed articles on this problem and checked everything. Still won't load. All other browsers work fine.

    Have checked firewall and network settings and compared to other computers running firefox. All is ok, but firefox won't load any webpages. This started immediately after it updated yesterday. No error messages.
    Have been having problems with updates on serveral of our computers for a month or so. Previous problems have always been that firefox renames a file it needs by adding moz.backup to the file name and I have to search for the file and remove it. This time I'm getting no error messages.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I have three user accounts on one computer. On only one account when I when I check Help - About fire fox only one user account says apply update and won't apply. The other two work fine.

    One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.

    As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
    As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications.  There is no additional licensing required for additional user accounts on the same Mac.
    Each user account is able to run the Office apps.  The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
    You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

  • Please help, I've tried everything! Gmail won't open, it just endlessly cycles and rarely even gives me an error message: all other sites work fine (Windows 8).

    All sites work fine except Gmail will not load. I prefer Firefox, but to be fair, Chrome and IE are doing the same thing when I try to use them. Occasionally Gmail will pop up, most of the time it just endlessly cycles and I don't even get an error message. I'm going to have to get rid of gmail if this goes on.
    It's maddening! I've tried everything I could find on mozilla support--restarted in safe mode, clear cache, cookies, etc. This is a brand new Windows 8 laptop. It started a few weeks after I got it. There is nothing else wrong with it, it had a fresh new OS installed before I got it. Please help! Thanks so much.

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

Maybe you are looking for

  • System Copy of R/3 4.6C using R3LOAD ( Error )

    Hi, System Copy of R/3 4.6C using R3LOAD. System Environment Source: R/3 4.6CSR2 4.6DKernel Oracle8 HU-UX Target R/3 4.6CSR2 4.6D-EXT Oracle9.2 HU-IA64 R3SETUP -f CENTRAL.R3S Setup was started, and after the parameter input has been given, R3SETUP-f

  • [SOLVED] CTRL+ALT+F? don't working

    I don't know when it stopped to work, but today I needed use CTRL+ALT+F? to log in text mode, and it does not work. I don't know where I need start my investigation. System updated every day (and today too). Thanks for any help. Last edited by mkanad

  • Topic must be specified error

    I am new to Oracle ESB. I created a flow locally and just ported it to AIX server and conducted some integration tests. But eneded up getting error like this: Any suggestion is appreciated . <SUPPL_DETAIL><![CDATA[ORABPEL-12134 ERRJMS_ERR_CR_TOPIC_CO

  • Title photos of web galleries are not changeable?

    Dear everybody, I've been trying to change the "title photo" of some of my web galleries - that is the picture a viewer sees first when entering the gallery overview. Simply putting the desired picture in first place via iphoto doesn't do the job. Do

  • Par failing on EDK 11.4

    Dear forum members, I've designed a system on custom board using the spartan-6 lx45t device on EDK 11.4 using the base system builder. Following is the device utilization summary after map:     Number of LOCed IOBs                  97 out of 97    10