Siri comes up with different results than google maps

I was doing a search for Food Lion through Siri but she wasn't finding the one right around the corner from my house. I went into maps and it found it no problem. Why do they come up with different results? I thought Siri searched google maps.

Because Apple maps is NOT google maps.

Similar Messages

BYOD Solution with different product than Cisco ISE

Hello,
Will it possible to make BYOD WiFi with different product than cisco ISE? such as Dell ClearPass or some sort of other product which does support Cisco WLC 5508.
Regards,

Sure it's possible... Dell resells Aruba's ClearPass, so really it's up to the vendor implementing ClearPass to understand what is possible or not. Both ISE and ClearPass does OnBoarding, which is used for BYOD. Both require licenses for this added feature also. There might be other ways to achieved BYOD, but it depends in what you want and what the product can do.

Moveing average price after posting invoice with different value than GR

Hello all
I have a question as in subject.
If I will post goods receipt and after this I would like to post an invoice in MIRO with different value than in goods receipt , the MAP on my stock will change about this different???

Hi,
Your MAP will get recalculated as the price difference will change the total value of the stock and the stock quantity will remain the same
MAP=Total value/Total stock
Hope this will help you
Reward if useful
Thanx and Regards
SHYAM.R

Disjointed Rollovers with different results

Hi,
In Dreamweaver CS4 I'm trying to do a disjointed rollover that swaps one image on mouseover and restores it on mouseout (a simple navigation bar rollover) and swaps a second image onclick and doesn't restore the original (an image in the main content area). Right now both images restore on mouseout:
http://inkllusionist.com/test
I realize I may be going about this the wrong way... any advice? Should I try to do this with something other than the javascript behaviors?
...Later...
Well, after more searching I found the answer in a very nice video on youtube.
http://www.youtube.com/watch?v=hN_MhdmtCsM&feature=colike
It explains that you set the simple rollover using the behavior "Set Nav Bar Image" and you do the main image swap using the behavior Swap Image and set that to <A> onClick and uncheck Restore images on Mouseout. It's so simple when ypu know how. lol.

> Is it possible for me to create a disjointed rollover so
that when I mouse
> over
> one image it will make another image switch to a .SWF
file?
Not in any easy way that I can think of.
> How can I make an image switch to something else when I
mouse over a
> totally
> different image?
Behaviors: swap image
-Darrel

How do i sync my iphone with different contact than what i have on my ipod

how do i sync my new iphone with a different contanct than what i have on my ipod

See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Items in the shopping cart appear with different price than in the catalog

Hi All,
We are running SRM 5.0 (Classic Scenario) with external catalogues.
After selecting items from the external catalogue and transferring them to the shopping cart, the items appear with different price(the problem exists in the productive system)
The strange thing is that there is no dependence or sequence between the differences. For example, in one shopping cart, one item is with correct price, the price of the other item is not correct (when I click on the icon which is showing item details in the catalogue, the price is different than the one in the shopping cart). Sometimes the difference is significant, sometimes not - if the item price in the catalogue is 22.34 EUR, in the shopping cart is 21.22EUR or if the item is 45.62EUR in the shopping cart is 45.60 EUR. There is no logic.
I tried to create a shopping cart in the support system, with the same items from this catalogue, and they are sent back in SRM with the correct prices.
I traced all OCI parameters, sent from the supplier catalogue, and everything is correct.
At the example given below the price in the shopping cart ordered in the productive system is 69.00CZK, and after that during the test the correct price of 73.870CZK has appeared.
NEW_ITEM-DESCRIPTION==Durable-KeyClip-keytag%2C+black
NEW_ITEM-MATNR==
NEW_ITEM-MATGROUP==
NEW_ITEM-QUANTITY==10
NEW_ITEM-UNIT==EA
NEW_ITEM-PRICE==73.870
NEW_ITEM-PRICEUNIT==1
NEW_ITEM-CURRENCY==CZK
NEW_ITEM-NEW_ITEM-LEADTIME==1
NEW_ITEM-VENDOR==
NEW_ITEM-VENDORMAT==0176%2F1957001
NEW_ITEM-MANUFACTCODE==
NEW_ITEM-MANUFACTMAT==
NEW_ITEM-CONTRACT==
NEW_ITEM-CONTRACT_ITEM==
NEW_ITEM-SERVICE==
NEW_ITEM-EXT_QUOTE_ID==
NEW_ITEM-EXT_QUOTE_ITEM==
NEW_ITEM-EXT_PRODUCT_ID==23109
NEW_ITEM-EXT_SCHEMA_TYPE==UNSPSC
NEW_ITEM-EXT_CATEGORY_ID==55121504
NEW_ITEM-LONGTEXT_1%3A132==Durable-KeyClip%0D%0Akeytag%2Cblack%0D%0A%0D%0A6pc
I checked the error log in SLG1 for BBP_OCI, and no error message exists. In my opinion the problem can be in supplier system, because otherwise all items will be with wrong price. And at the moment, there are shopping carts in which all items are with the correct price!
It is not something in the user profile, because in one shopping cart created by one user some items are correct, some of them not.
I also checked with the supplier, they said that they haven't change the price, recently.
Has somebody of you met this problem?
In the IMG-> Define External Web Services (Catalogs, Vendor Lists etc.) I have set all parameters for the standard call structure: the URL of the supplier, our company ID and password for their catalogue.
In the Detail view for the catalogue, the following parameters are set
u201CAdditional functions in the product catalogueu201D field:
-     Display product data again in the catalogue
-     Validate product data from SAP Enterprise Buyer
-     Find supply sources
u201CTechnical Settingsu201D field
- Use Error Log
Thanks,
Desi

That means that we are not maintaining material numbers in SRM, so there are no predefined price or info records for that materials in R/3 system, or in SRM.
In the set up of external catalogues, validation of the price is set. Which means that, if a new shopping cart is created from already existing one, and meanwhile, a change of the price is done by the supplier in the catalogue, the new item price will be adopted in the shopping cart.
No prices are maintained in the SRM system, everything is from the supplier catalogue.
Desi

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Wny does ACR 7.3 open a .JPG with different dimensions than PS 13.0.1 x64?

I have a .jpg file that opens in Photoshop 13.0.1 x64 as an image with dimensions of 5588 x 4627 pixels. If I set Photoshop to open it in ACR 7.3 it opens with dimensions 4453 x 4418 with the image looking squished horizontally and cropped at the top.
I captured the image on a Nikon D600. I developed the NEF with DxO Optics Pro 8.1.1 and output a TIFF. I opened the TIFF in Photoshop (without using ACR) and did my editing including some transformation to create mirrored wrap for a canvas. There are versions saved as PSDs. I resized the image for output and used PS to create a JPG. That JPG causes the strange (to me) behavior when Photoshop tries to open the file.
I used the same PSD to create multiple JPGs with differing levels of quality (varyiing from 9MB to 27MB). Photoshop exhibits the same behavior on all of them.
If I process the JPG thruough ACR, the resultant image retains the bad dimensions and distortions.
The Adobe "chat" preresentative said this was expected behavior in a 2+ hour chat. He/she said that they were able to replicate the different dimensions on their end with their images.
Does anyone know if this is normal behavior? If so, why?
Has anyone experienced something similar?
Thanks,
Joe
I am running this on Win7 x64 Home Premium with 8 GB RAM. I also have LR 4.3 installed on the computer and previously used it to process the same NEF file.

I sent the JPG to a service for a print on canvas. They reported that the image was not the proper size and shape when they opened it in Photoshop. Unfortunately I have not been able to get them to tell me what pixel size it was, just rough inches (!?!?!). So I started trying things in Photoshop and came up with this strange behavior that might explain the problem at the service.

Same circuit twice with different results

I've been having some trouble having Multisim match a circuit I have modeled in MATLAB. During the troubleshooting process I put voltage probes on each wire used. The circuit portion in question involves an AC Voltage source connected to a resistor which is then connected to an inductor. I made a copy of the circuit and started from scratch. One of the circuits gives a voltage drop across the resistor, while the other one doesn't drop any voltage at all. I've checked all of the connections and they are all good. The only difference I can see is that one has the pins labeled 1 - 2 while the other is 2 - 1. Does anyone know what the problem is here? I shouldn't not be getting two different results for the same circuit.

Hi Jmerc,
Maybe you can post the circuits so that we can compare.
Tien P.
National Instruments

In vs. Exists with different results

Hi all
I have a general question
Are there any cases where using the exists operator can produce different results/amount of results
Vs. using the IN operator ?
If yes please post an Example
the reason that i'm asking this it's because the exists returns true if the subquery returns at least one row and
it doesn't continue to check , but IN check all the values ,
this is critical for me to know , if i need to returns the amount of rows etc.
Thanks In advanced
Naama
Edited by: naama on Jun 21, 2011 11:52 PM

Hi,
naama wrote:
Hi all
I have a general question
Are there any cases where using the exists operator can produce different results/amount of results
Vs. using the IN operator ?
If yes please post an Example I don't believe that's really your question.
The answer to the question above is: Yes, of course. Most of the time, EXISTS and IN will produce different results. For example, this query returns 3 rows:
SELECT     dname
FROM     scott.dept
WHERE     deptno   IN (
               SELECT deptno
               FROM     scott.emp
;but this query produces 0 rows:
SELECT     dname
FROM     scott.dept     d
WHERE     EXISTS      (
               SELECT NULL
               FROM     scott.emp
               WHERE     sal     = d.deptno
;Try again; what really is your question?
An important difference between EXISTS and IN is that EXISTS always returns TRUE or FALSE, but IN can return any of the 3 logical values: TRUE, FALSE or UNKNOWN. When you say "WHERE condition_1" in a query, the row is included if condition_1 is TRUE, and the row is not included if condition is either FALSE or UNKNOWN. That means you can have situations where these two conditions:
WHERE deptno IN (subquery_a)always produces the exact same results as
WHERE EXISTS (subquery_b)but
WHERE deptno NOT IN (subquery_a)always produces the exact same results as
WHERE NOT EXISTS (subquery_b)for the exact same subqueries. That's because it's possible for neither
"IN (subquery_a)" or
"NOT IN (subquery_a)" to be TRUE, but either
"EXISTS (subquery_b)" or
"NOT EXISTS (subquery_b)" will always be TRUE.
Review SQL's 3-valued logic. NOT UNKNOWN is the same as UNKNOWN.

Cfmap with CF9.01 and Google map v3

The information I've seen indicates there is a hotfix for CF9.01 which will allow the cfmap tag to work with Google maps v3. We have installed the latest hot fixes.
I obtain an error when trying to use the Google maps v3 API key with the cfmap tag indicating you are trying to use a non v2 key. Google is discontinuing support of v2 on Nov 19.
Is there something else we need to do to be able to use cfmap with v3? Do we need to upgrade to CF9.02?
Upgrading to CF10 prior to Nov 19 is not an option.
Does anyone have sample code to share?
Thanks for your help.
Pam Butenshen (AAOS)

Have the latest 9.01 hotfix installe
Obtain error Google has disabled use of the Maps API for this application. The provided key is not a valid google API key or is not authorized for the Google Maps JS API v2 on this site.
Also obtain error
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB7.5; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2; .NET4.0C; .NET4.0E)
Timestamp: Tue, 29 Oct 2013 19:26:56 UTC
Message: 'google.maps.ZoomControlStyle.SMALL' is null or not an object
Line: 110
Char: 1
Code: 0
URI: http://testorthodoc.aaos.org/CFIDE/scripts/ajax/package/cfmap.js
Is there a way to be sure the cfmap.js file is looking at v3? cfmap.js has a date of 2/28/2013

Help with drag picture like google map

Hi all,
I would like to create on my web page a architectural blue
print of a house that people can see everything but inside a small
800pixel x 500pixel. My picture is 10 times bigger so I would like
to do the same process as Google Map, you click and drag your mouse
to move the map with the zoom thing. Is they a way to do it ? a
program that exist or could Dreamweaver can do it ?
I'm not a expert and not also a god but I have a base in
Dreamweaver
Can someone highlight/help me on this one ?
thanks in advance !

If you have Photoshop CS3, there is a program, "Zoomify",
that allows you to create exactly what you need. It's under
"export".

Need help with latest version of Google Maps

Have the 8700 series Blackberry, google maps 2.0.3 worked fine for last 2 years, upgraded to 2.3.2 yesterday and the application downloaded but wont run. Starts to run and then get the following message:
'Network unavailable: This application requires a data connection and some Blackberry devices require reconfiguration to work properly'.
Can connect to the Internet using browser just fine, all other features of the blackberry working just fine.
Any help would be appreciated.
By the way, did already uninstall and reinstall the application a few times. I wish I had kept the old version just in case.

Seems that new version GoogleMaps does not work on your device.
You can install old version on your device.
If old version does not work after uninstalling new version and installing old version do the following:
Backup your sensitive data via Blackberry Desktop Manager.
Wipe your device memory:
Go to: Options - Security Options - General Settings
open menu and select "Wipe handheld"

Webutil_File_Transfer.DB_To_Client with different result

hi
Forms 10.1.2.3
i use in Forms this function to Downlaod BLOBs
Webutil_File_Transfer.DB_To_Client
     ('H:\l.xml',
     'T_DEV_ARCHIV',
     'dar_xml_blob',
     'dar_id=110874')
In the BLOB are German letters inside ü, ä, ö ..
Result on two Clients:
at the first client the result looks good
On the other Client I’m missing the German letters.
Why the transfer is different? What has to do with the client?
BLOB's are binary files !!!
I just despair.
Edited by: alinzenb on 04.03.2013 13:16

Yes, but did you add a characterset definition to your XML file, and does the data stored in the XML match this characterset?
If you have e.g.
<?xml version="1.0" encoding="windows-1252" ?>But the data in the blob is actually UTF-8 encoded you have a Characterset-Problem, as the XML parser will treat your (UTF-8 data) as windows-1252 data...
cheers

HT201263 how to sync ipad with different computer than first synced

How can I sync my ipad to a new computer than originally synced with?

If you no longer have the other computer read these instructions. It contains everything that you need to know.
https://discussions.apple.com/docs/DOC-3141

Siri comes up with different results than google maps

Similar Messages

Maybe you are looking for