Siri does not work 3 purple dots shake and go away

Siri does not work.
Each time I try 3 purple dots look like they are processimg then shake and go away
I have good bars and 4g or wifi
Does not matter still happens

Siri's been feeling a little under the weather today: http://techcrunch.com/2012/09/07/siri-why-are-you-having-trouble-connecting/

Similar Messages

  • Siri does not work unless I power off and repower my I5 phone

    Siri does not work unless i power down my I5 phone and repower it.  I have to do this each time I use Siri

    This might help.
    http://www.youtube.com/watch?v=v5dPmXGVCfw

  • The raise to speak feature on Siri does not work

    The raise to speak feature on Siri does not work anymore is there any possible fixes for this

    I had the same problem (iPhone 5), but the fix was simple.
    Turn off your Bluetooth.  Yeah, I know this sounds crazy.  Here's why.
    When you use Siri with the "Raise to Speak" feature activated (Settings/General/Siri), this enables the proximity sensor that lets the iPhone know it is near your ear, activates Siri, and turns off the display.
    However, if you are using a bluetooth headset (like I do), then this sensor is turned off automatically, because you will be speaking thru your bluetooth and not the iPhone to activate Siri and make calls.
    To prove this, do the following test.
    Make sure "Siri" is on, and "Raise to Speak" is on (Settings/General/Siri).
    Turn off your Bluetooth (Settings/Bluetooth).
    (TEST) Hold your phone in front of you, and with a natural motion, bring the phone to your ear (as if you are answering a call).  Siri will automatically activate, assuming you want to ask it/her a question (very cool feature). And the screen will turn offautomatically.
    If you have never used the "Raise to Speak" feature, this feature automatically activates Siri when you raise the phone to your ear (really a cool and helpful feature). It may take a little practice to get used to this.  I struggled at first, but soon got the hang of using a natural motion to bring the phone to my ear.  Starting with the phone in front of you, the phone should be "almost" parallel to the ground when it gets to your ear.  It may take several practice tries to get it, but you will get it, and you will be hooked on this neat little feature.
    Ok, with this done, this proves your proximity sensor is funtioning properly.
    Now, turn on your Bluetooth (Settings/Bluetooth).
    And repeat the same (TEST) above.
    This time, Siri should not activate, and the screen should not go off.  Why? This is because your voice communications with callers (and Siri), are now going thru your Bluetooth, and not the phone handset.  Because of this, their is no need for the proximity sensor, so it is automatically turned off (when Bluetooth is on).
    I can only speak for me and my situation, and what worked for me.  However, their may be other issues regarding the proximity sensor separate of this that I am not aware of.
    I hope this helps you.
    Man I love the "Raise to Speak" feature, you will too.
    God Bless You All.

  • HT4623 Siri does not work

    Siri does not work and I could not hear any music it tell me I need Internet an I already have it.

    You need Internet connection or cellular data for Siri to work.
    Switch Siri OFF then back ON again.
    Settings > General > Siri

  • My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.

    Hello wilsontot_too,
    Thank you for the details of the issue you are experiencing on your iPhone.  It sounds like you are not noticing transparency on your iPhone.  It may be that you have "Increase Contrast" turned on in your iPhone settings.
    I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
    iPhone User Guide - Large, bold, and high-contrast text
    http://help.apple.com/iphone/7/#/iph73b89c6
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

    I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

    i try to download now, do you think when i download and install the windows support software, can i fix the problem?

  • In photoshop CS6 extended my 3D-extrusie does not work. Why? And can I fix this? I am a mac user. Pl

    In photoshop CS6 extended my 3D-extrusie does not work. Why? And can I fix this? I am a mac user. Please help?

    I have paid the full extended version, but it is not working. See my screenshots.

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

    Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

    Same problem here...

  • HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    Check the status of your warranty here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Make a Genius Bar appointment to have your iPhone checked:
    http://www.apple.com/retail/geniusbar/

  • Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador

    Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador

    Hola Classo, encontré una solución en estos foros. Solo agrega un signo + al final del numero al que quieres llamar desde Siri.
    por ejemplo: 0998345789+
    Cuando haces eso, igual puedes llamar, igual puedes usar facetime y iMessage.
    Y siri ya llama.
    Es al menos una solución temporal hasta que Apple pare bola.

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    Here you go:
    http://support.apple.com/kb/ts1559

Maybe you are looking for

  • Network based and a-gps, data use tests

    i was trying to find this kind of info, but only found others asking. i hope this is useful info for others, especially while roaming. skip to the bottom for conclusion, this is the process i took: i called nokia tech support, their phone support his

  • Read IDOC WMMBID02 information and compare inventory data with SAP

    Hi All, Here is an explanation of the issue: I need to read the data from an inbound IDOC, status 64, of standard type WMMBID02 and message type WMMBXY. I do not want to post the IDOC, but only read the IDOC information which is mainly the material n

  • Proper use of a Lookup table and adaptations for NET

    Hello, I need to create a few lookup tables and I often see the following: create table Languages Id int identity not null primary key (Id), Code nvarchar (4) not null, Description nvarchar (120) not null, create table Posts Id int identity not null

  • Query spends most time on report CL_RSDM_READ_MASTER_DATA

    Hi Experts, I have created some queries on a custom cube with about 8M rows of data.  I have compressed and  partitioned the cube ()CALMONTH) and built a relavent aggregate that is being picked up by the query.  Also, it seems like the OLAP cache is

  • Exchanging licence.bea file from one  machine to other.

    Hi, If we exchange licence.bea file in Home Directory of weblogic 8.1 in one machine to the Home Directory of Other machine. Will there be any changes that we observe ? Please if any one tried or know in detail about licence.bea file ,send the Sugges