Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

Similar Messages

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Tomcat does not work when using only netcfg to start network

hello!
for myself i wrote a script to connect automatically to a wireless network using netcfg. i do not start my network via the daemon (/etc/rc.d/network).
i have a project and so i want to use tomcat. but it does not work correct, i can start it, but i can't connect via "localhost:8080". when i start my network using the network daemon it works! apache runs fine, but i need tomcat!
can someone help me please?
thx, marv

where is "lo" enabled in the network script? i did not found it and/or i have no idea which function enables it.
can you help me please? can i just copy the lines of code to my own script and it will enable lo?
mfg iggy

WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
Dhanaji

For web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

BAPI_BUS2002_ACT_CHANGE_MULTI does not work when i will call it multiple.

Sir, i am using following code. and execute in same order with one network code. its work fine and update activity attributes.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
CALL FUNCTION BAPI_TRANSACTION_COMMIT
but when i want to use "BAPI_BUS2002_ACT_CHANGE_MULTI'" bapi multiple time with different network id, its not update any single activity. please help me in the reqard.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
CALL FUNCTION BAPI_TRANSACTION_COMMIT
Edited by: Haroon.Rashid on Jun 3, 2010 7:57 AM

its working fine in ABAP code, but right now i will call these BAPI from Dot net and these give me following error.
1) Individual check for change to object Activity 903579 0010 successful
1) Individual check for change to object Activity 903580 0010 successful
1) Object Activity 903580 could not be changed
1) No update flags or extensions were set for Activity 903580
2) Error in individual BAPIs or precommit: posting not possible

Page Process Does Not Work When Column for APEX_ITEM.HIDDEN is not shown

I have created a Report Region based on a SQl Query. In the query I have three columns that need to be within an array, but 2 of the 3 columns should not be displayed on the report. Therefore, I don't have Show checked for them in the Column Attributes of the Report Region.
In my testing, if I don't display the columns that are within the arrays on the report and run the page process to insert records into a table, I receive the error of "no data found". In reverse, if I display the columns, my insert is successful.
Is this how the arrays work? Or is there something I have not done correctly.
Below is the query for the Report:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID) ID, -----this is the column I want to hide-----
APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE) PTYP, ----this is the column I want to hide----
C.PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQ
Thanks,
Keisha
Edited by: user4579720 on Sep 16, 2009 2:30 PM

Keisha,
If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
Using your query as an example, I would re-write it like this:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID)
|| APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
|| C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
Thanks,
- Scott -
http://sumnertechnologies.com/
http://spendolini.blogspot.com/

Own voice app does not work when using Maps-N8

I've recorded my own voice and uploaded it in Nokia Maps. Own Voice is found in the list of available languages but still after choosing it, all I get is a female chinese voice. I want to hear my own beautiful voice but how??

Have you tried deleting the voice catalogue file from the Maps folder?
Go to the File manager and browse your memory card to cities\diskcache\voices -folder, and delete voice_catalog file.
After that turn Maps application "Online" and check the voice catalogue again from Settings > Navigation.
Happy to have helped forum with a Support Ratio = 42.5

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

Siri does not work when used for calling a contact function

Similar Messages

Maybe you are looking for