Siri has lost volume when connected to internet. all else works perfectly even siri when off the internet
Tech support said it is a beta system and no guarantee to get it fixed. When I called the Apple store they were not aware that Siri is Beta. Now I have to drive many miles with my new Ipad to try to get it fixed. OR replaced. They don't make it easy. MyI phone took three vists and two replacement phones to have an operational system. APPLE will not even allow for any compensation for their problem. NO "gifts" to make up for the miles and the time the problem causes you. I have bought Apple stock and now see it dropping and it will continue to drop if they do not change their customer service. This is not the old Apple which I based my whole office on. In the past year two purchases. I phone 4s and the new IPad . Both with problems requiring my efforts, car travel, and time to try to get fixed.
Does anyone have a solution to the loss of volume on the siri function that only occurs when connected to the internet? All other functions have full volume Don
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.
Similar Messages
-
My 4gs iphone has lost wi-fi connectivity. When I go to "Settings > Wi-Fi", I see "Wi-Fi" and the on-off button, but it shows up in light gray. When I click "Off" to turn on Wi-Fi, nothing happens. HELP!
Try the suggestions here to attempt to solve your problem:http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. If so, contact Apple support or visit an Apple store. -
My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My MacBook Pro has lost it's connection to my home wifi
My MacBook Pro has lost it's connection to my home wifi. I made no changes to my Mac or router it just would not pick up the signal when I turned it on one day. Wifi works fine for other laptops and iPhone, and laptop is picking up other wifi signals. I have tried suggestions here such as resetting PRAM etc but can't seem to find posts with same problem
No. I see other networks but not mine. And when I try to type it in manually it says 'connection timed out'
-
gen 5 has lost volume control of headphones and also radio does not recognize headphones are plugged in. Any Ideas on a fix?
The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care. -
i have reset my password and i dont have wifi to connect to my ipod and activate the steps in the i cloud process, now i want to know that will all my videos , photos and music will lost if i connect to my computer if storage and backup is in off mode
If iCloud Backup is set to Off in Settings>iCloud>Storage & Backup, it means that your iPod will not automatically back up to iCloud, but will automatically back up to your computer when you sync. The only way you would risk losing data is if you have never synced with iTunes before. If that's the case, you have to take special precautions to avoid losing data, as outlined in this user tip: https://discussions.apple.com/docs/DOC-3141.
-
Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.
I'm experiencing a similar problem.
I have a MacBook Pro Late 2011. I was using Lion (not Mountain Lion) with CS3 with no problems. Recently I installed a new hard drive in my computer and used Time Machine to transfer all my files and settings (still with Lion; I did not try to open any Adobe applications at this point). Then I udpated to Mavericks. Upon trying to open one of the Adobe applications, it told me I needed to reinstall CS3. I inserted the original disc and followed the instructions on the ReadMe file. I went to Applications > Utilities > Adobe Installers > Add or Remove Adobe Creative Suite 3 Design Premium. I did a reinstall, and at the end, it said that some of the components failed to install (see screenshot):
I did a partial install (not all CS3 applications), so there could have been more errors than this if all applications were installed. The applications themselves appear to work fine, but when I try to run the updater, it tells me I have no internet connection.
link470 wrote:
Acrobat updater works just fine [after I install the manual updates till 9.2.0].
Can you tell me where to find these manual updates? I looked on this page:
http://www.adobe.com/support/downloads/collection.jsp?collID=1&platform=Macintosh
but I don't see 9.2.0 for any of the CS3 applications.
The CS3 that I purchased (Design Premium) came with Adobe Acrobat 8. I tried to manually install the 8.1.1 update. It said, "Please choose the copy of Adobe Acrobat Professional to update", but the application is grayed out (see below). I did not try to install any other manual updates, yet.
I'm not sure what to do here besides use my CS3 applications the way they are without updating them ever. (I would rather not subscribe to the Creative Cloud.) Any help will be appreciated. I might try doing a complete unintall followed by a fresh install. -
my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?
You have to restore:
Forgotten Passcode or device disabled after entering wrong passcode -
I am trying to download Skype on iPad but it has been on "waiting" since. I have checked my connection and all is working perfectly. Can anyone help?
Thanks Diavonex. This worked perfectly
-
Itunes has lost my purchase song list but all the albums are list as complete my albums. The ones i have purchased are tell me i have to buy them again. Not happy Itunes not Happy Apple.
How do i fix it or does apple have to fix it on there end?If the single songs are no longer available in Itunes, that would also explain why you aren't able to see your purchases.
If the songs are on your phone you can transfer purchases to iTunes app on your computer. You wouldn't be able to download them again though. -
Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?
Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari -
TS3274 my ipad 2 suddenly lost the sound. all else works.
my ipad 2 suddenly lost the sound. all else works.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom -
I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)? -
I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8 -
DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com
Maybe you are looking for
-
Problem: Input must be in the format _____ in SPAD
Hello everyone .. (sorry for my english) I want to create a new page format with size in decimal, for example: width = 255.5 mm .. but i get error : Input must be in the format _____ ... I am going to TX SU01 and click in tab Defaults, i probe with a
-
Adobe reader plugin missing from firefox plugins list on redhat 6.1
Hello, I'm having a problem with putting adobe reader 9 plugin installed on firefox 3.6.17 on redhat 6.1 (64bit) (Not recreatable on redhat 5.4 with same versions of reader and firefox) Even though nppdf.so appears in the directory /usr/lib/mozilla/p
-
HI We capture excise during MIGO and without posting part2 we try to do MIRO then the system should give error/warning "part2 posting not done yet" Where do we activate this ? Thank You
-
Is there a way to "sync" my gmail address with my mail application?
See topic title.
-
Duplicate Invoice Creation MIRO
Hi All, Our client has an special requirement. Currently we have an issue with duplicate invoice creation with MIRO transaction. The 'Check doub inv' check box in the vendor master data is already checked. For MM, there are three configu