Siri ,"I'm not permitted to do that"

I was using Siri for making calls while I was driving my car, but now when I try to use siri for making calls I recieve this message " I'm not permitted to do that".
I search for a solution and I found this post https://discussions.apple.com/thread/4318513?start=0&tstart=0
But this solution for devices with facetime, my device is not.
I need you help please and this is my device information:
iphone 5
iOS: 6.1.3

If you have update to the NEW iOS6 and the FaceTime feature is switched "OFF" Siri will NOT make external calls and will say " I'm not permitted to do that" So all you have to do is switch the FaceTime feature "ON" and leave it like that for you to be able to give a voice command to it perform the task of making calls.
GoTo: Settings > General > Restrictions > Flip FaceTime to “ON/OFF

Similar Messages

Siri says "I'm not permitted to do that for you." When I ask her to call someone

When I ask Siri to call someone she says "I'm not permitted to do that for you." Hard reboot doesn't help and I can't locate any settings that might affect this. Any ideas?

If you have update to the NEW iOS6 and the FaceTime feature is switched "OFF" Siri will NOT make external calls and will say " I'm not permitted to do that" So all you have to do is switch the FaceTime feature "ON" and leave it like that for you to be able to give a voice command to it perform the task of making calls.
GoTo: Settings > General > Restrictions > Flip FaceTime to “ON/OFF

TS4079 i am not permitted to do that for you

When trying to use Siri to voice dial a contact by name. Siri returns with this error "I am not permitted to do that for you"

I had the exact same problem. After exhaustive experimentation I found a solution.
Settings > General > Restrictions > Flip FaceTime on (it was off)
When I flipped FaceTime back to off, it went back to not permitting calls. So I have to conclude that this was the issue. I guess Siri requires FaceTime now.
I hope this helps.

Siri says I am not permitted to do that for you

when I ask her to dail a number she says the above phrase . FYI I don't have Facetime because I get my iPhone in MENA. She was working fine but suddenly stop responding .Any ideas ?

I have resetted my iPhone and Siri now respond flawlesly . Thank you so much

TS4079 Siri is "not permitted to make phone calls"?

I have the iphone 4s. When I ask Siri to call someone, the responce is that "I am not permitted to do that."
I am ensure how long this has been happening, but it is furstrating. I have had the phone about 4 months and I am in the USA, so I don't know what the problem is. I have done a reboot sveral times to no avail.
Any help is greatly appreciated.

Any reason you're posting this on the iPad forum?

Decimal Places are not permitted

Hello,
The Vendor Invoice amount in Rs 25920.72 and the currency is INR, When i am entering in T.code FB60 i am getting an error "Decimal Places not permiited". i made changes in T.code SU01 (Maintained User) and T.code OY01 (Defining Countries in SAP Systems) respectively but still getting the same error as "Decimal Places not permitted". After that i checked in T.code OY04 (Set Decimal Places for Currencies) and there Currency INR is reflected and "no decimal places" field is assigned to it. What should be done. Please Help!
Regards
Ashwin

Yes. you are right, once done the transaction for INR
Your are not suppose the change decimal settings.
So it will effect old transaction.
Please check the note mentioned. below. Hope it helps.
Note 172410 - Percentages of completion with decimal places
regards
vamsi

Error (23317) The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks. Recommended Action The operation Change properties of virtual machine is not permitted on a virtual machine that h

Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Hello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties.

Why is my macbook DVD player no longer playing commercial DVD's that it used to play perfectly? It reads the disc, but then says not permitted when I hit play. It is much older than 12 months warantee so I hope there is an easy fix?

The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!

Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player.

"You have included content in your post that is not permitted" when trying to post very positive feedback about Apple.

So I spent 2 hours writing a huge post about how I love what Apple has done with the Audio/MIDI/Sound config tools in OSX.
I spent alot of time trying to be positive. And i get to the end and click "Post" - this stops me and gives me the following vague message:
"You have included content in your post that is not permitted."
I am not sure what this means or why it appeared. I used no negative content in my post, no cursing or trolling or anything... And i wouldn't try to troll or flame on these forums anyways. I've posted some problems I've had, which were all addressed very quickly by the way. And I've always said what I thought, but never just posted things to be negative.
And then after my post is rejected, i tried again. The discussion forums offered to restore my previous draft, but I clicked yes and nothing happened. Then the entire Discussions site pretty much stopped functioning... I tried closing reopening Chrome. I tried a completely new session in Chrome Incognito. I tried using Safari. None worked.
I was then offered a survey to take. I clicked "yes", and nothing happened. Then I looked at the Javascript Link for the survey and used the Chrome console to send the javascript anyways. And then it said the survey was behind my browser (it wasn't) and there was an "X" button to close the yellow notification at the top of the page. Then restarted my computer and it's finally working, but my post is still being rejected, which is ridiculous.
Anyways, went through alot to say something positive. That is the exact thing that gets to me though, it's the censorship. Why am I not allowed to say something good? Hopefully this one goes through...

I don't believe I'm circumventing any DRM/Copyright. I'm currently enrolled in a Harvard eDx Copyright Law class. As long as you are original and offer a minimum of creativity, you are eligable for a copyright, without any need for registration. But that's besides the point. I can see how it may have flagged the post though.
Ultimately, what I was trying to do at the time is play music using software that I own and stream this in online video. But the comment about streaming my personal music online is just an example of something awesome I can do with an Apple product.
Thanks for the link to the feedback page though. I'll go ahead and send it in.

I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I figured it out...needed to use comment tool set, not the editing tool set.

When I try to open a zip file, I get a message that state operation not permitted. What do I do to correct this?

I've retrieved a download application in zip file format. During download, a message appears that states decompression failed. When I try to open the file, I get a message that the operation is not permitted. How do I correct this situation?

Make sure the place you are downloading the zip file isn't using a password protected zip file.
What operating system are you using?
Have you installed any decompresison software, or are you using the system built-in software?
Where are you downloading the application from?
Is your data backed up?
Are you using any firewall software or system optimization software, or any browser addon software?

Don't work telnet client from ssh session ("%Connections to that host not permitted from this terminal") in 151-4M.

I changed IOS to 15.1.4M in the ISR router.
If I connect to console by ssh and I type "telnet X.X.X.X YY" in console then It appear the strange message "%Connections to that host not permitted from this terminal".
After I downgraded to ios 12.4.24 , then it's all work fine .
configuration line vty :
line vty 0 4
transport input ssh
transport output all
What it's the problem in IOS 15.1.4M?

Thank you for answer.
I've created the access-list : access-list 20 permit 192.168.200.0 0.0.0.255
line vty 0 4
access-class 20 out
transport input ssh
transport output all
IF I try "telnet 192.168.200.2 " - It's working
But IF I try "ssh 192.168.200.2 " - It isn't working, appear "% Connections to that host not permitted from this terminal"
IF I try from router with IOS 12.4.23 - It's working fine .

I am confused why my reply includes content that is not permitted

I tried to reply to this topic:
http://discussions.apple.com/thread.jspa?threadID=2691835&tstart=0
and got the "you have included content in your post that is not permitted":
I can't even quote my reply here (was met with the same warning) and am quite certain I did not violate the terms. This is very upsetting - how can I go about finding out what I did wrong?

Thank you, LS; nothing from hosts at this point.
What I said - in different words - was something like the OP might have answered his own question if he set up his messages to be stored on the server; that I only have POP but thought if it was an i... account it may have something to do with those settings and that he could move the messages to a different mailbox to make sure the messages would be available in Mail.
We'll see if this wording will make it; and, yes, I've read the ToU many times, and do not understand why this would not be permitted.
As it is now, the poster's question seems to have been answered with similar suggestions, so mine (which would have been the first reply) is no longer of value; but I'd still like to know which part I violated.
Edit - got the same message; deleted the server name and inserted ... and now it worked? At least one of the replies included the server name (three letters starting with an "a") and were successfully posted.
Message was edited by: Barbara Daniels1

You have included content in your post that is not permitted.

I posted a question in the discussion and replied the response "You have included content in your post that is not permitted." I re-read my post. There was no swear word, no questions about doing anything illegal or violation any TOS, and no link that could cause a problem. So I started editing my post and I found the guilty word: "Streaming" and "Live" together (let's see if it goes through in this post).
My suggestion is, instead of giving a broad statement, to actually list the words that are not permitted. This will save us time trying to figure out what offended the automated censor.

EricDu wrote:
So, once again, legit users are punished for the behavior of a few bad apples (no pun intended).
Yep. That's the way of the world.
I still think the filters could be more friendly. Taking, for example, the user's posting history into account.
I would agree, but Jive, the software that these forums run on, may not allow that sort of flexibility. Or Apple Legal may not allow that sort of flexibility.
Regards.

Not happy to find out that "Siri" funtion is not set up to search for buisnessess in Aus

Just discovered that "Siri" function is not set up to search for a business in Australia i.e Siri! can you find me a Italian restaurant nearby??? "sorry can only search for this in U.S and in U.S English. Went to my local Apple store thinking this would be a simple fix only to be dissapointed with being told this function is not set up for use in Aus.

5 minutes on Apple's Australian site would have told you that.

Siri ,"I'm not permitted to do that"

Similar Messages

Maybe you are looking for