Siri not recognizing new incoming messages on 4s using iOS 8.1

Help!
I upgraded my 4s to iOS 8.1.1. Now when I'm using my bluetooth device, Siri does not recognize any text messages or iMessages that I get. I ask it to read me the last incoming message, which worked nicely before the upgrade, and it tells me that I have no new messages. I've tried all kinds of resets and accessibility modifications, but nothing has worked so far. Ideas?

Hey Rileybear1,
Thanks for the question. If I understand correctly, Siri has a problem recognizing messages when you are using a bluetooth device. Does this happen without the bluetooth device? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Similar Messages

  • Why does Siri not read my text messages to me?

    Why does my Siri not read my text messages to me?

    If your phone is locked with a passcode and you ask siri to read any new text message, Siri tells you to unlock it first, which you do by entering the passcode and the moment you do that Siri says 'OK' and starts reading your message without you doing anything else.
    However if you have not set the passcode in your phone and if your phone is locked (which means you have yet not done 'slide to unlock') and you ask siri to read the message then you will hear nothing..there will be silence ..and then 'siri will ask you to reply or read it again'. If you want to hear the message then first slide to unlock your phone and then ask siri to read for any new text messages and you will start hearing your message.
    Let me know if this does not work.
    Cheers

  • 5530 music player not recognizing new songs

    hi all,
    new problem for me. the nokia music player is not recognizing new music. it just files them under unknown. the files are properly tagged. the only way to get it to recognize the files is to format the sd card and put the music back on the card.
    also after deleting music, the player still has the files in its unknown folder, even after updating the music library.
    very frustrating as i use the phone everyday as my main music player. this problem has only turned up in the past couple of weeks, with me changing nothing else on the phone.
    any advise?
    Solved!
    Go to Solution.

    Hi, just try up this found somewhere-
    You can do this to rebuild the library as it is corrupted.
    Restart your device and then refresh your library. If this doesn't help then;
    Connect the phone to your pc/lappy and put in 'Data transfer' mode.
    To delete the library files:
    - Ensure you can see hidden files in Windows Explorer:
    Windows Explorer .. Tools .. Folder Options .. View
    Select "Show hidden files and folders"
    - Connect the phone to your PC using the USB cable in "Data transfer" mode
    - Find and rename (or delete if you're really brave) files with names like:
    E:\private\101FFC31\mpxv1.mpd
    E:\private\101FFC31\pcv5.mpd
    E:\private\101ffca9\harvesterdb.dat
    (assuming the phone's mass memory / card has been connected as E)
    Note that the folder names may be different and the files may have prefixes - eg: mpxv1.mpd could be called abcmpxv1.mpd.  Basically, you need to search under the Private folder for any files that look similar.
    Now just refresh the Music Player library and the job is done.
    This will take longer than normal as it's a complete refresh, but it should now work.
    Please thank me by giving 'KUDOS' star. It will help me to serve you better.
    Currently using N82 and 5230. Next would be N?

  • Mail not loading new gmail message

    I have Apple Mail 4.3 and since 22 November it is not loading new gmail messages. New messages are appearing in gmail and iphone, but not in Mail - any ideas why this would be

    I'm facing the same problem since 27 Dec 2010, can't find and fix for this problem.
    I can download other mail accounts except imap.gmail.com, it just show loading and nothing happen, and it also choke up almost all my internet bandwidth.
    I gave up and switched to outlook for mac and no such problem.
    Hope apple can look into this problem and I'm sure there are more out there having same issue.

  • I downloaded carbon copy. transferred entire internal hd  to new replacement HD  thru USB.  computer booted from replacement hrdrive. then installed replacement hard rive into iMac. when rebooting imac did not recognized new replacement hd.

      i downloaded carbon copy. transferred entire internal hd  to new replacement HD  thru USB adapter kit.  computer booted from replacement hrdrive. then i erased the internal hardrive and reloaded the operating system.( i needed to find out if the hard drive was bad or virus/worm was the cause). then installed replacement hard drive into iMac. when rebooting, imac did not recognized new replacement hd. i also upgraded memory at the same time.  ok what did i do wrong. do i have to remove the new replacement hardrive to extract the data.

    It should not matter. CCC will "clone" the recovery partition as well, but not knowing exactly what operation you had CCC perform it is difficult to know what may have gone wrong - it has many customizable options and you have to choose the correct one.
    I have performed the same transplant as you described and didn't have a problem, but if your Mac is not recognizing the internal HD you really have no choice other than to reinitialize it as suggested. After that, install OS X, upgrade to Mountain Lion if required, and migrate your old account(s) from your backup.
    my backups have backups.
    I assume you didn't mean that literally. Have redundant backups - don't "back up your backups".

  • Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

    Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

    Problem was founded: plugin "Speed dial" was autoupdating this page when open new tabs with him

  • ITunes not recognizing new PC and, therefore, doesn't recognize my IPOD

    ITunes not recognizing new PC even though it says it is authorized. The result: ITunes doesn't recognize my IPOD. It does still have my old PC name attached to my account. What can I do to rectify this situation?

    It could be a tiny bit of fluff in the dock that's preventing a particular wire from connecting. A magnifying glass and a decent light should let you inspect the port. If there is any rubbish lodged in the dock opening use a can of compressed air or a fine needle to ease it out taking care not to damage the connectors.
    tt2

  • HT201628 My ios device(iphone 5s)  is not recognized in Itunes and I am using windows 8.1

    My Iphone 5S is not recognized in Itunes. I am using windows 8.1. What is the problem as I am not able to sync anything on the computer to my Iphone 5s?

    Use the article about this issue from the support site
    http://support.apple.com/kb/TS1538

  • When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

    When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message.  I use Exchange 2010 only local users.

    I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
    http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
    CRM Advisor

  • Device not recognizing once i open iTunes to upgrade iOS 6 in iPad

    My is device iPad. I need to upgrade my iPad to iOS 6. After installing iTunes 11.x after plugin my device is not recognizing once i open iTunes to upgrade iOS 6 in iPad.
    Please help me on this. I am doing this on Windows 7.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • My iPhone 6  is deleting contacts after sending them a message on iMessage, using iOS 8.1.2

    Hi All,
    My iPhone 6+ is deleting contacts after sending them a message on iMessage, using iOS 8.1.2.
    Is anyone else having this problem? Does anyone have a fix?
    It was not doing this until today.
    Cheers Nic

    Hi Virkit,
    Welcome to the Support Communities!  It sounds like you have already tried some of the troubleshooting steps below.  If your Touch ID is not able to enroll any of your fingers, it may need to be serviced.
    Use Touch ID on iPhone and iPad - Apple Support
    http://support.apple.com/en-is/HT5883
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    Last Modified: Oct 21, 2014
    I hope this information helps ....
    - Judy

  • Siri not reading new messages in iOS 8

    Ever since I have starting using iOS 8, Siri no longer reads my new messages to me.  In my car, with my iPhone 6 connected to my car speaker via Bluetooth, I hear a ping that I have a new text message (or to be more accurate, a new iMessage).  So I ask Siri to read me my new messages, which always used to work.  But now, Siri claims that I have no new messages.  If I look at the phone I can see the new message.
    If I know that the message came from Person X, and I ask Siri to read me my last message from Person X, it will instead read the second-to-last message from Person X until I go to my iPhone and launch the Messages app and read the message.  Then, if I ask Siri to read the last message from Person X, Siri will correctly read the last message.
    I see various people posting similar problems for the last two years, but I haven't seen any solutions.  And yes, I have restarted my iPhone and that doesn't fit.  In fact, I kept my fingers crossed that this would be fixed in iOS 8.1, and then 8.1.1, but no luck.
    -Jeff

    Well, this kinda solves my problem. I seem to recall that it would still suggest words (but only one at a time), whereas now it doesn't. It does offer corrections if I fat-finger something. Us users are never satisfied! ;-)

  • Drive not recognized - new issue...help please

    I am replacing a 120 GB drive with a 250 GB one to give more space for video files. On reboot, I get the message: You have inserted a drive not recognized...etc...with the choices to initialize, ignore or eject.
    Then I notice that the drive on the same bus (in the bottom of the tray) is not seen on the desktop. It was in two volume partitions and was also a 250GB. Big mystery. So I remove the new one and connect just the older drive. No luck, message says ...a drive not recognized...etc. So then I change the jumpers twice - same results - and I remove the jumper...same thing. I see this drive in Disk Utility represented by a number and size (232 GB) but not by the volume names. And when I try to verify or repair, the option is greyed out (yes, I booted to the install disc and went to Disk Utility, as per instructions.
    This disk has data on it I need, and it's not backed up. All I did was unplug the connectors and then replaced them as before. So please, tell me how I can restore this one. I could remove it and put it in an external FW enclosure and then see if it shows up, but I don't want to take chances. Worse case scenario is a data retrieval service - and I'm almost certain I shouldn't have to do that as this is a healthy drive.
    Any suggestions very gratefully appreciated, thanks!
    Keith

    Tom, I tried every one of your suggestions: set the older drive (Seagate) at P4 and first connector on IDE ribbon to cable select and the new drive (Hitachi) in tray just above it at P5 - end connector on ribbon also to cable select. Result: two dialog boxes for both drive on reboot "You have inserted a device not recognized..."
    Then I tried slave on the Seagate and Master on the Hitachi...same result as above.
    Then I tried alternate Master and Cable Select configs. on the Hitachi for 15 or 16 pin..whatever that is...but was printed on strip on drive. No go.
    I think it must be another issue here than jumpers...although that may have something to do with it. When I installed a new drive in my Quicksilver I never got the Device Not Recognized dialog...it either saw the drive with all data on it or it didn't, until I set the jumpers correctly, as directed for that incident.
    What bothers me is that when I removed the new Hitachi entirely and reconnected the old Seagate as the only drive on that cable, either with jumper set to CS or M or S I am still getting the dialog.
    Any other solutions, please.
    K.

  • Mail not recognizing new certificate, recognizing old expired certificate.

    Recently the Thawte certificate for the SSL mail server at work expired and Mail could no longer connect to our mail server. No one else in the office uses a Mac and no one else seemed to be affected. IT claimed all their certs were up to date. I contacted the fine folks at Thawte and they hooked me up with the new cert. I've added that to my X509Anchors keychain, along with the root cert from Thawte to be sure, and Mail is not recognizing it. In fact, the old expired cert is in my login keychain, so I delete it, but every time Mail attempts to connect to the mail server, the old expired cert reappears in my login keychain and it gives me the same "expired cert" error message. Temporary workaround has been to change my system date/time so it is within the valid dates of the old expired cert, but that renders my calendar useless, and other problems. What is going on? Any ideas? How can I get Mail to use the new valid cert?

    Anna,
    I am having the same issue. I am on a new laptop without my cert, so I downloaded it again from thawte but it only installs the public key, not the private key.

  • Mail not recognizing new password

    All right so I recently had to change the password on one of my Yahoo.com mail accounts because I could not remember the last one. I have this one linked up the mail application on my computer, however it is not recognizing the new password (yes, I'm typing it in correctly, in fact I'm just copy + pasting it). I also checked keychain and it didn't find any problems  apparently when I ran first aid.
    How do I get my computer to recognize my new password? This is ridiculous.

    Unfortunately it is not recognizing the password still. It recognizes the copy + pasted password on yahoo.com, but when I use the copy + pasted password with apple mail (even after deleting it) it doesn't recognize it.
    It was giving me a message that it couldn't connect when I put in the password. However I figured it out. What I had to do was copy the password from what I had, put it into the login area for yahoo.com, have firefox remember the password, then copy that password from firefox's preferences and paste that into the apple password part.
    Weird thing is though is when I looked at the two (the one I had kept typed and the copied one from the saved yahoo) they were exactly the same, so I don't know why it wasn't recognizing it.
    Thank you for replying to my question though!

Maybe you are looking for