Siri not working with configuration profile

I am a Systems Administrator and we are using the Apple Configuration Utility to put profiles on our phones. We have our Wireless network, pass code and Exchange setup in the profile and ALLOW Siri and Siri while locked as well as all applications, TV, Downloads, Facetime etc. per our HR policy.
The iPhone 5's will not work with Siri when locked or unlocked even though it is allowed in the profile. The iPhone 4s phones do not have this problem. The only way we have been able to get Siri working on the iPhone 5's is to remove the profile entirely.
Has anyone else seen this issue? If so, were you able to resolve.
The OS on all of our iPhones is 6.1.3 which to my knowledge is the latest and greatest. Any advice or thoughts are welcome.
Thanks

So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them. I did this and now Siri is working so it appears that one of the apps was intefering with Siri. Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings. This one closing all open apps working in the background was what did the trick.
I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings. Something Apple could do to be proactive about helping us out. All in all I do love my iPhone 4s but that experience with Siri was unexpected. I should have read more before buying the iPhone 4s so at least I would have been prepared.

Similar Messages

DNG Profile Editor not working with new Profiles from LR 3.6?

I'm noticing that DNG Profile Editor is not really able to work with profiles from newly supported cameras, like the X10. Apparently the profile spec has been updated. Has DNG Profile Editor been abandoned or will it be updated to work with the new spec? I really hope it is!

Thanks. I am looking forward to editing the v4 profiles for the D700 - I just want to change a few colors in the existing profiles. I think the existing v4 profiles do an excellent job of matching the Nikon colors, but I don't like a few of the Nikon colors. Some colors have too much Red, but Red is too Orange.
I have selected a number of images that have colors I want to change. I selected the Camera Neutral (v0) and Camera Portrait (v0) and using the latest DNG Profile Editor I select the 18 colors from the Color Checker Chart. I then use the images that have the colors I want to change and determine which of the 18 points I selected from the Color Checker are close. I then edit those points - only 6 points. I only need to change the Hue by 5 units or less. I don't change any of the other selected points of the Color Checker, but feel that by selecting them I locked in the exisiting colors. Hope this is a good aproach.
I wish Nikon would do something equivalent to the DNG Profile Editor for their Picture Control profiles so they could be edited and loaded into the camera.

Siri not working with new iOS 8.1.1 update

Siri will not recognize my voice. The mic on my phone works because I can talk on the phone with others no problem. I can record my voice and play it back using the voice memos app. I cannot record my voice to send audio texts by holding the microphone in iMessage.
I tried everything. I turned Siri off, then on again. I shut the phone off and turned it back on. I restarted the phone by holding the home button and the side button. I restored my iPhone too, still no siri or voice detection. Does anyone have the solution to make Siri work and voice detection?

Hi Monster32oz,
You should try resetting your settings. This won't erase any data, but will put many settings back to their default states, like passcode, wallpaper, Wi-Fi settings, etc. If Siri still does not work, I suggest that you make a trip to an Apple Store's Genius Bar. Hope this helps!

Siri not working with reminders

Suddenly Siri has stopped being able to set reminders for me. Started using her with reminders about 2 weeks ago and everything worked fine. Today she has suddenly developed a problem with using her on my iPhone. She still works perfectly on my ipad.
Have tried switching her on and off and even rebooting the iPhone and there still seems to be a problem
Any suggestions how to solve the problem?

So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them. I did this and now Siri is working so it appears that one of the apps was intefering with Siri. Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings. This one closing all open apps working in the background was what did the trick.
I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings. Something Apple could do to be proactive about helping us out. All in all I do love my iPhone 4s but that experience with Siri was unexpected. I should have read more before buying the iPhone 4s so at least I would have been prepared.

Siri not working with Nike plus

I noticed today that siri would not working while i was using Nike Plus on my run. Is this a known problem or is it just me?

did anyone ever help you out? i still have a similar problem. Unfortunately, I have Vista as my OS and I don't think they've fixed the bug that will allow my nike+ workout to be uploaded onto the nike website.

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

MBP CD2 DVI to VGA not working with projector

I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
Any ideas, any help, any answers?

Here are the actors in our play today
1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
4. DELL 2300 MP projector
Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
In Display preferences we see for the MBP B
Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
VGA Display
Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
This is a problem!
So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
I shut down/restarted the MBP B.
I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
Enter the iBook!
I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
iBook display prefs reveal:
Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
Color tab: Generic RGB Profile
VGA display, 1024X768, colors: Millions,
Now. I unplug adapter from iBook, iBook readjusts to native display
plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
Scene 2: The FREAKY thing!
Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
So, I plug back into iBook-projector. And the iBook works immediately again.
I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
So,
I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
Back to the good ol' iBook. Of course it works.
Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
Now switching over to MBP A- DOESN'T WORK.
As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
Any thoughts, ideas, ways to diagnose? Thanks!

Ip phone is not working with 802.1x port

i can authenticate the pc using 802.1x, but its not working with ip phones...waiting for your kind reply..

The switch is 4006 and the image is cat OS 7.3(2).
The port configuration is
set radius server X.X.X.X
set radius key xxxxxx
set dot1x system-auth-control enable
set port dot1x 3/17 port-control auto
set port dot1x 3/17 initialize

Siri not working with configuration profile

Similar Messages

Maybe you are looking for