Siri will only work for US searches
When using Siri in the UK it will only search for companies in the US. Please can any advise me on how to change this although my setting say English (UK)
You can't change it. All you can do is wait for Apple to roll out this functionality to your country. They have stated they will expand the service during 2012, but have not announced any hard dates.
Similar Messages
-
Usb will only work for powered devices
I am having an issue to where my USB ports will only work for devices that have power supplied to them, ie an external hard drive that has a power adapter and not for devices that do not have power supplied to them. I was seeing if anyone could help me resolve this issue?
I have a Macbook Pro 15 inch Late 2011 model w/ the 2.2 Ghz i7 Processor.Eustace Mendis wrote:
This is simply a case of the USB ports not being able to provide enough power. I do not know if there is a way to change this.
This is highly unlikely, the USB specification (to which Apple adhere) requires a constant 1 amp at 5 volts, a peak of 2 amps for a brief period is available. All reputable manufacturers adhere to this spec, it is more likely a fault condition.
To the OP, reset the Pram http://support.apple.com/kb/ht1379
and reset the SMC http://support.apple.com/kb/HT3964
Reboot the machine and try again.
If this brings no relief you should follow Oglethorpes advice and take it to Apple for repair. -
Trusted Sites GPO only works for administrators
I've got a major problem and was hoping somebody could help me. I've got a hundred users or so that connect to an RDS Farm. The RDS farm is made up of several Windows Server 2008 R2 servers. One with IE 10 and the other with IE 8.
The problem that I'm having is if add sites to zone assignment in group policy and add sites to the trusted zone it will only work for users that are administrators. I found a reference to this problem and the issue being IE Enhanced Security, but
Enhanced Security is turned off.
If I'm a normal user with Remote Desktop User rights and I go into IE and check Trusted Sites, there is nothing there. If I login as administrator and check I can see all the trusted sites.
Anyone know how I can fix this?Hi Cyprus,
Please check if you have the computers or users needing the policy are in a group that is specified. Remember that domain users includes all users, domain computers includes all computer, and authenticated users includes both users and computer. By
default, a GPO will be scoped to Authenticated Users.
Also please run gpresult command on non-administrator user to check if it sync to client successfully.
In addition, I suggest you ask Group Policy forum for more professional help:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support -
I have a ipod mini from 2005, it will only work on my charger. I did get a new i pod touch 4, how do i get the music from the old mini to the new touch. I have never put any music on it myself, my ex-husband did it all and has the password. I never new it. I'm sure not about to call him and I don't think he'd give it to me anyway. Please help!!!
I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
The simple software "lock" used on iPods should not prevent you from off-loading the song files. Once the song files are on your computer, you can add them to your iTunes library. Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
NOTE: For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen. The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS. -
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
Hello all,
I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings>General>Siri. At the General menu "Siri" doesn't appear. What should I do to set Siri up if it doesn't appear at settings>general?
Thank you,
Melanie.Go to Settings>General>Restrictions and make sure Siri is set to On.
-
My iPod shuffle only worked for a short time. It will not charge and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.
Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price. Won't hurt to stop by and see what they will do for you. -
My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?
I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
BUT now I have sound! Thanks for your suggestion, it helped! -
i'm looking for the adobe suite 5.5 and it says it will only work on leopard or snow leopard... but i'm running on lion... anyone know what to do here?
Hi.
I'm guessing that you'r not buying a new edition of the Adobe Suite 5.5.
Apparently Adobe haven't been awake to make sure the 5.5 is 100% compatiable with Lion. However, I do believe it's only a few minor troubles you will experince and Adobe constantly update their software to adjust to Lion.
You should go to Adobe.com and see the list of known issues.
Best regards. -
Wifi will only work temporarily.
Hello all. I just bought a new iPod Touch 4G last week and have had issues with the Wifi. My iPod recognizes my Network and can connect to the Internet with all blue bars and I can use and access the Internet for a few minutes and then when I lock my iPod and 5 minutes later I unlock it, when I go to Safari it gives me the message "Safari cannot open the page because it is not connected to the Internet." Oddly though when I access Google's home page it will connect. I use my laptop and it can connect to my Internet just fine and never loses the connect. I have tried resetting my network settings on my iPod but to no avail. I also reset my router and I turned it off for 30 seconds and back on. My main question for you all is: why can I connect to my Wifi connection and it have a full signal but yet it only works for a limited time?
Here are some details of my Wifi settings if any of you find this helpful:
IP Address is DHCP and it is 192.168.2.100
Subnet Mask is 255.255.255.0
Router is 192.168.2.1
DNS is 192.168.2.1, 192.168.2.1
Search Domains and Client ID are blank.
HTTP Proxy is Off.
*I have renewed my lease and "forgot my network" and neither of those solved anything.*
*I am using my Wifi at my house in the same room as the router and my iPod still can't connect.*
*My security is WPA2-Personal. Encryption type is AES.*
*My router is an SMCWBR14S-N4*
I have heard people say when you lock the iPod it will disconnect from the network but that sounded absurd since how are you expected to receive instant sports updates and emails when the Wifi isn't connected?
Any help will be greatly appreciated.
P.S. My operating system is 4.3.3. I didn't see it listed in the drop down box hence I decided to make note of that here.Update your router with the latest firmware from the manufacturer which is available here: http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_USA&cid=1&scid=119& pid=1697
Note that when you enter a URL the browser will contact the DNS server to translate the symbolic URL address to a numeric address (for example "www.cnn.com" -> 157.166.255.19). If you can connect to Google when you are having this problem but nowhere else this points to a DNS problem in your network. Since your router is identified as your DNS server it may be having a problem in this area. -
Installed ios 6 on new iPad and siri will not work.
Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
Thanks, and have a great day.Then you need to change your device details as this still says iPad2.
It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
There are a millions and millions of people using Apple iDevices.
Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having. -
Problem: Why does this only work for powers of 2?
I wrote this program to create a golf league schedule for, ideally, eight players. However I want it to be flexible enough to permit for other denominations, such as 10 or 12. When I run the program it works perfectly for any number that is a power of 2 (2,4,8,16,32,etc...) but it will not work for other even numbers such as 6,10, or 12. If anyone has any insights it would be most helpful.
*(This is my first post on this forum so if anything looks not quite right or if this post isn't worded exactly how it should be then I apologize in advance)*
Here's the three classes.
public class ScheduleDriver
public static void main(String[] args)
//instance variables
int max; //size of flight matches array
ScheduleMaster master;//instance of class
//get max number of players for flight
System.out.print("Max number of players in this flight:");
max = Keyboard.readInt();
master = new ScheduleMaster(max);
//create weekly schedules for season
master.createSchedule();
//display weekly schedules
master.displayWeekly();
}//end main
}//end ScheduleDriver
public class ScheduleMaster
//instance variables
int maxPlyrs;//maximum number of players in flight
Week[] weeklySchedule;//array of weekly matches
public ScheduleMaster(int plyrs)
//set up instance data and declare array size
maxPlyrs = plyrs;
weeklySchedule = new Week[plyrs];
//set up the size of each week's matches array
for (int pos = 0; pos < plyrs; pos++)
weeklySchedule[pos] = new Week(plyrs);
}//end for
}//end constructor
public void createSchedule()
int count = 0;//index of weeklySchedule array
final int QUIT = -1; //quit value for loop
int flag = 0; //value to continue or exit loop
//for each player A
for (int a = 1; a < maxPlyrs; a++)
//for each opponent of player A
for (int b = (a + 1); b <=maxPlyrs;b++)
//set count/index and reset flag to zero
count = (a - 1);
flag = 0;
//while still haven't found correct week for this match
while (flag != QUIT)
//if at least one of these players are already scheduled
//for a match this week
if (weeklySchedule[count].checkPlayers(a,b) == true)
//if last valid index of array has been reached
if (count == (maxPlyrs - 2))
//reset count/index to zero
count = 0;
else
//incriment count
count++;
}//end if
else
//assign this match to array of matches for week
//and then exit loop
weeklySchedule[count].setMatch(a,b);
flag = -1;
}//end else
}//end while
}//end for
}//end for
//fill in last week/position night
for (int pos = 0; pos < maxPlyrs;pos++)
//set up position match
weeklySchedule[maxPlyrs - 1].setMatch(pos + 1, pos + 2);
//incriment pos
pos++;
}//end for
}//end createSchedule
public void displayWeekly()
//for each week in schedule
for (int pos = 0; pos < maxPlyrs;pos++)
//display header
System.out.print("WEEK " + (pos + 1));
//if pos/index is 0 or even, flight plays front 9
if ((pos % 2) == 0)
System.out.println(" [FRONT 9]");
//else flight plays back 9
else
System.out.println(" [BACK 9]");
//display lines
System.out.println("----------------");
//display week's matches
weeklySchedule[pos].display();
//skip a line
System.out.println("\n");
}//end for
}//end displayWeekly
}//end ScheduleMaster
public class Week
int[] schedule; //array of players involved in matches for week
int max; //max number of players
int count = 0; //number of players currently involved in matches
public Week(int size)
//set up instance data and size of array
max = size;
schedule = new int[size];
}//end constructor
public boolean checkPlayers(int playerA, int playerB)
boolean flag = false; //flag to determine if at least one of
//the players to check are already playing
//this week
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player A matches player already playing this week
if (schedule[pos] == playerA)
flag = true;
}//end for
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player B matches player already playing this week
if (schedule[pos] == playerB)
flag = true;
}//end for
return flag;
}//end checkPlayers
public void setMatch(int playerA, int playerB)
//if array can take more matches
if (count <= (max - 2))
//insert players into array of active players for week
schedule[count] = playerA;
schedule[count + 1] = playerB;
//incriment count of players playing this week by 2
count = count + 2;
}//end if
else
System.out.print("No more matches can be entered!!!");
}//end setMatch
public void display()
//for every even numbered index starting at zero
for (int num = 0;num < max;num++)
//display the player at that position and the next consecutive
//player who will be his opponent for the week
System.out.println(schedule[num] + "VS" + schedule[num + 1] +
//incriment num
num++;
}//end for
}//end display
}//end WeekAh, I have discovered the problem. The reason for the infinite loop was because of the resetting of the counter/index after every successful match entry back to (a - 1). This was causing matches to be put into weeks where they didn't belong, which caused the program to infinitely loop because it couldn't find an appropriate week to place it's next match. The only time the count should be reset back to zero is when a new player A is being processed or the last valid array index has been referenced before an out of bounds exception would be thrown. I'm still not entirely sure why this doesn't occur on powers of 2 but theh again I haven't put too much thought into it having solved the initial problem! :)
Anyways thanks for the input all who posted, much appreciated.
Happy programming!!!! -
Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advanceYou need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547 -
My applications always quit...iChat only works for 4 minutes at a time HELP
ok so i bought leopard today
i installed it but i skipped that step when leopard checks the volume of your comp or whateever (not sure if that will affect what im about to say)
now i have leopard...i love it but my applications just KEEP quitting out and my iChat only works for 4 minutes and then my friends stop recieving my messages
should i uninstall and re install?? how would i go about doing that??
anything just please helpOne possibility is that your hard drive is failing. If you don't have backups of any data you don't want to lose, that needs to be your number one priority. Get that data backed up. Once you have done that, you can start exploring options.
Open Disk Utility, select your hard drive and take a look at the SMART status:
If it says anything other than Verified, the drive is definitely failing. If it says Verified, all that means is that it isn't failing in a way that the drive can detect. -
I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.
Maybe you are looking for
-
Video conferencing with MSN users
Hi there, can anybody tell me how I can video conference with my MAC with someone using MSN account? On my side I have a google account and an MSN account Thanks in advance
-
Java-puzzlers...Why 2 different outputs for the same line
Here, why it is giving 2 different outputs for the same set of lines Line-1 and Line-2 are both same.But giving 2 different results ??? /*java-puzzlers*/ public class Elementary { public static void main(String[] args) { System.out.print
-
Settings required for Forecast Consumption with Sales Order
Hello Folks, I have one scenario: Forecast for Finsihed Product - "PNG_Fert" in Location "1000". I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should no
-
2D preformance on a 30" inch monitor
Hey We have some trouble with 2D performance on a 30" inch monitor. When we try and move objects in the program (2D cad design program) it will render the movement very slow. The users that are experiencing this problem have a 2 screen setup, one 30"
-
How can I detect when a text field changes in Cocoa-Applescript?
I'm working on an application where I have one text field, and below it, a "Send" button. When the button is pressed, is sends whatever is typed in the field to all the user's Skype contacts. I have to prevent the user from sending a blank message to