Siri window does not display and app was destroyed with latest 6.1 update

This happened right after the last update to 6.1. Press the button and hold it. You get a beep but no SIRI window. Otherwise it will do as you tell it to.
There are numerous other bugs. Go into Purchased apps. Cannot select an app on the second row left, second one down from the top. eith the one above it displays or the one below it.
The update also destroyed an expense tracking app, Pocket expense which had a substantial amount of data in it. Press on the app icon and it flasehes and does not run.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
If neither of these work you may have to restore your ipad via iTunes on your computer.

Similar Messages

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

Photoshop window does not display unless connected to external monitor

I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
Is this a known issue?
Any workarounds?
Any ideas?
There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

Check number confirmation window does not appear and checks become confirmed automatically

We have updated to SAP 9.10.105 PL 00,
and we have two issues with check printing, first when we print check we do not receive a confirmation window and all of the checks show as being confirmed. as soon as be print checks in the payment wizard after the checks have printed we than get an error message.
"no matching records found 'checks for payment' (OCHO) (ODBC 2028) [message 131-183]
the second problem is if I set over flow to blank paper, it will only print one check at a time, and i still do not receive a confirmation window.
I am not sure if the original patch for 8.8 was left out of the 9.1 release.

Thanks for this, I found this after posting a message with SAP Support. Just a heads up, they consider it as 'Consulting' function not an 'Application Error' so they will not be a fix. We'll just need to know to make sure users know to un-check this Box.
SAP Note: 0001422688 - Print on Blank Paper checkbox on Checks for Payment
Symptom
Scenario 1:
Check Number Confirmation window does not pop up after Checks have been printed.
You might receive the following error message:
'No matching record found 'Checks for Payment' (OCHO) (ODBC-2028) [Message 131-183]'.
Scenario 2:
User is not able to print batches of Checks either via Payment Wizard or via Document Printing and
the Cheque Number Confirmation window does not pop up.
Cause
Consulting
Solution
The issue could be resolved by uncheck Print on Blank Paper on Banking -> Outgoing Payments ->
Cheques for Payments
'Print on Blank Paper' setting on Checks for Payment is saved per user
SAP Note: 0001059752 - Printing Checks for Payment Skipping the Confirmation Screen
Symptom
Check Number Confirmation window does not appear and the check automatically get confirmed.
Reproducing the issue
Scenario:
Print a Check for Payment Via Document Printing or Directly for the Check for Paymet screen (under
Banking > Outgoing Payments)
Expected Results:
The Check Number Confirmation screen pops-up.
Actual Results:
Check Number Confirmation screen is skipped
Cause
Consulting
Solution
If the option 'Print on Blank Paper' is ticked, the Checks Number
Confirmation window will not pop-up.
Go through the following steps and check the settings:
1. Go to Administration -> System Initialization -> Print Preferences -> Per Document tab,
Document: Check for Payment. Check if the option 'Print on: Blank Paper' is ticked.
2. In Check for Payment document check whether the tick box 'Print on Blank Paper' is ticked.
3. Go to Administration-> Setup-> Banking-> House Bank Accounts. Check in the 'Paper Type' column
if the option Blank Paper is chosen.

My computer(A toshiba) crashed and when I bought a new computer(a Mac), my previous apple ID does not word and I was only able to get songs that I bought in 2004. I am unable to authorize my account to get to songs that I purchased recently. Please help.

My computer(A toshiba) crashed and when I bought a new computer(a Mac), my previous apple ID does not word and I was only able to get songs that I bought in 2004. I am unable to authorize my account to get to songs that I purchased recently. Please help.

Steve Taylor1 wrote:
If you have exceeded your allowance of 5 machines then Apple will not allow you to authorise additional Computers. If you still have access to your old toshiba fire it up de-authorise it and then try again with the new computer.
While this won't help if you are having password problems, I did want to point out that you do not need to access old machines to de-authorize them. Once you are signed in at the iTunes store, access "my account" by clicking on your username in the top navigation bar. Then "manage devices". You can remove any old machines that way.

ITunes proxy authorisation window does not appear (and account is being blocked randomly)

Many users have iTunes installed on their PC. iTunes requires proxy authorization to connect to internet. Appropriate popup window appears when opening iTunes and trying to open some internet-based page there. Entering current AD account credentials helps to connect. There is also a checkmark there allowinf to save credentials for further use (and do not show this window anymore). When AD password is changed - this popup window does not appear again and user's account is being blocked (because iTunes tries to connect proxy with old credentials). The question is: is it possible to reset proxy settings, stored somewhere inside iTunes somehow? Just to return proxy authorization window back. Did you have such an experience? If you caould share any knowledge - it would be great.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

Reader X does not display drawing in PDF generated with LaTeX

I have a quite large PDF generated by pdfTeX, Version 3.1415926-1.40.11 which contains also XY-pic drawings rendered with Xy-pic version 3.8.2, PDF driver v.1.4.
One drawing does not display correctly in Adobe Reader X. Neither on Windows, neither on Mac. It does display correctly with following programs:
Preview on Mac OS X 10.5 and 10.6
Adobe Reader 9.x
Skim (skim-app.sf.net).
When I open this document with Adobe Reader X I get following error message when I hit page 58:
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem".
Where does one report rendering problems?
Damjan

See [https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

QuickWatch windows does not display Value and Type.

The quick watch window is only displaying Name (screenshot below). It is not displaying Type
and Value fields. I tried "Reset All Settings", repair, uninstall/install but the issue is not resolved. I will appreciate any help.

Hi ranjanks,
Could you share us a sample? So we could debug the same app in our side, please also tell us the VS version in your side.
For example, just a simple console app with a variable "int i"， I could get it in my VS2013 version like the following screen shot. So if you debug a simple sample as mine, how about the result? If it works well, I doubt that it would be related
to the specific variable of your app.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Jpeg image loaded with Loader- loadBytes() does not display when app is deployed on remote server

I am loading a JPEG image from the server, using the Loader->loadBytes() and that works when the app is deployed under my local Tomcat server. When I deploy it on other servers the image is not displayed, instead of the image I see II*
On the server side I have java, Spring, BlazeDs and I use RemoteObject on the client.
The code that loads the image looks like below:
private function imageLoadResultHandler(event:ResultEvent):void {
    var result:ArrayCollection = event.result as ArrayCollection
    var bytes : ByteArray = result.getItemAt(0) as ByteArray;
    _loader = new Loader();
    _loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loaderCompleteHandler);
    _loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, loaderFaultHandler);
    _loader.loadBytes(bytes);
private function loaderCompleteHandler(event:Event):void {
    var loaderInfo:LoaderInfo = event.currentTarget as LoaderInfo;
    var img:Image = new Image();
    img.source = loaderInfo.content;
    myPanel.addChild(img);
<mx:RemoteObject id="ro" destination="imageLoadService">
     <mx:method name="loadImage" result="imageLoadResultHandler(event)" fault="faultHandler(event)" />
</mx:RemoteObject>
Any help with this problem is much appreciated.
Thank you,
Lumi Velicanu

Hi Dmitri,
Thank you for the prompt reply, your question about the jpeg content was a helpful pointer.
I solved the problem, it had nothing to do with flex, it was all on the java side. The image was obtained from converting a TIFF to a JPEG, the conversion was failing and the flex loader was receiveing a tiff and it did not know how to display it.
The java problem was kind of interesting, I'll post it here as an FYI in case anybody cares :
On my server the first writer returned by ImageIO was an instance of JPEGImageWriter and on the other servers was CLibJPEGImageWriter. And it happens that only JPEGImageWrite can write the type of TIFF that we are having.
The fix was to iterate through all the writers and pick the instace of JPEGImageWrite, instead of the first one found.
Lumi

Windows does not open and I cannot see my desktop at all

I have a 2-year old T60, on which I recently tried to defragment files to free up hard space. Now, when turned on, it displays a message that the \WINDOWS\system32 file is corrupt or missing and that I have to reinstall windows with the CD-ROM, but I don't have it anymore. Can anyone tell me how I could possibly find this file and fix it?

Two steps to be executed to determine if the system can be recovered:
1. Easiest, boot the system and access Windows boot options (F8) and select "Last Known Good Configuraiton",..but this is unlikely to succeed if your system hive is truly corrupt since the LastKnownGood is inside the file you may be having issues with. This recovery option needs to verified since it only takes seconds and foolish to execute the next step w/o verifying this one.
2. The registry hive could be corrupted and a chkdsk will fix it, the Catch22 is Windows has a boot time chkdsk feature but it has to load the system hive first,....well if you system hive is corrupted then you'll never load the base components to execute chkdsk. You can create a Bart with PEbuilder but this is a task that requires a skilled novice or interim level expertise, if this is intimidating then you can download a shareware 14 day trial version with a genuine email address for your temporary license key and visit http://www.avast.com/eng/bart-demo-request.php download a compiled version of BartPE ISO.
If you aren't familiar with ISO's or how to burn an ISO then you need the assistance of tech since recording ISO's is a rudimentary task compared to what you have to do next--
Boot the PE enviro from your CD (you may have to press F12 at powerup to access your Boot Options menu
Execute the PE environment and start a command / DOS shell
chkdsk c: /f /x
Press Eneter (DUH, if you need to be told to press enter.....get tech help nub ((if you don't know what "nub" means..... you need to stop repairing your own gear))
Take note of any file errors during the chkdsk, there will be a tally report at the end of the process and depending on how badly the disk is chunked up or how large the disk is...this could take hours to finish.
If that fails, then you'll have to explore professional troubleshooting options or the possibility of a reinstallation becomes larger.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Home window does not display properly

When I first sign on to Firefox, the home window (Google) is displayed too far to the right of the screen to use. The only fix I have found for this is to slightly re-align the screen by moving the tab in the bottom right corner. This alignment problem is not critical, but is irritating since the screen must be re-aligned for each signon.

Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Make sure you didn't Zoom the webpages.
Ctrl+0 -> Normal View.

Print Preview in Safari for Windows does not display Flash object

I have a web page with images, text and a flash movie in several divs. I can see all the objects on the page but when I print preview the flash object is not displayed. The same problem occurs in Firefox 3 but not in IE6/7 or Opera9.5
Any clues/help would be greatly appreciated.

Click Help -> Report Bugs to Apple.
I'm hoping they fix it.

Reader 11.0.07 does not display content of PDFs created with LiveCycle Designer ES 8.1

We use some PDFs created with LiveCycle Designer ES 8.1 which do not show any content when opened with Reader 11.0.07, only a blank display area or erratic copies of the screen behind it. Documents look fine in print preview though and also print correctly. Tried to change various security or display settings, no effect. Tried other machines, different hardware, different OS versions (Win7, Win8), same effect on every single device with 11.0.07 installed.
Any ideas, anyone?!?

Hi,
Not sure why you are resolving the node (??), also I would not be inclined to include a period in the object name (.), maybe this is why you are resolving the node.
Also I don't see in the script where you are calling the instanceManager, in order to use the addInstance method.
Having said that the problem may be in the File > Form Properties > Defaults tab:
Check that Preserve script changes is set to Automatic.
Lastly is the form Reader Enabled? It would need to be for users with Reader to save the changes, including new instances of a repeating element.
Niall

Windows does not start and cannot get into safe recovery mode

Had a blue screen and when I start up Windows wants to run in safe mode. But this runs for a few seconds and then stops with a blank screen (have left this for over 2 hours).
If I select to start windows normally then the system just reboots to the windows repair screen.
I do not have a recovery disk as Windows vista was pre-installed. Any clues ?

Hi,
The possible reason is that Windows bootmanager or the system files are corrupted. You say that you haven't made a recovery disk, but what about Hdd image recovery (pressing F8 on startup)? If it's already removed, you have to:
1. Order the recovery disk https://backupmedia.toshiba.eu/landing.aspx Note, it's not free
2 Get a copy of Windows vista and install it. Then, download the all necessary drivers and enjoy it.
Greets

Siri window does not display and app was destroyed with latest 6.1 update

Similar Messages

Maybe you are looking for