Siri won't dial numbers starting with "0"

Am on 5.0.1.
I have a number for a contact stored as starting with 019 (it's a low cost long distance carrier pre-fix). Siri says dialling and then says can't call this number. Even if I dictate the number, Siri refuses to dial any number starting with 0.
Mighty frustrating......any work-srounds for this pls?
Thanks

I say "zero"....and Siri displays the number correctly but just doesn't dial. As mentioned above, the same number stored in the contact also doesn't get dialled.
Not sure if this helps, but the total number (including the 019 prefix) is 15 digits long.

Similar Messages

  • Siri cannot dial numbers starting with *

    My number is set not to show my caller ID.
    However in order to show it to many of my contacts I programmed their number with the *82 prefix that will show the caller ID number for that call and number.
    SIRI is unable to dial such entries, though they are perfectly valid dilaing combinations in the US
    Any workoaround?  What is the best way to let the SIRI team this is an issue?

    Hi.
    I have the same *82 problem as you do.  Did you ever get an answer that works.
    Thank you.
    Gary

  • I'm trying to input phone numbers starting with 0, into Numbers spreadsheet. It keeps deleting the 0-  any clues?

    I'm trying to input phone numbers starting with 0 into Numbers Spreadsheets. It keeps deleting the 0. any clues anyone?

    select the cells (or column) where you are entering the phone numbers and change the format to "Text":
    Then "Natural" way to write numbers is to omit leading zeros.
    Another ways is to leave the the cell format as "Automatic" and type a single quote BEFORE entering the phone number... like this:
    '0408

  • Use page numbers starting with 1 on the second page

    I have a document in Pages 09 that I need to have a title page. This page should have no page number so the numbers start on page 2. I have managed to get rid of the page number on the first page, but Pages keeps starting the numbers from 2 on the second page. I tried to set "Start at:" to 1, but that did have no effect. Is there any solution?

    From Vallauris I can't guess what but clearly, you forgot something !
    Compare your settings with these ones.
    Yvan KOENIG (VALLAURIS, France) vendredi 1 juillet 2011 14:00:35 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Why won't my coversations start with iMessage?

    So after the update to iOS 7 my coversations won't start with iMessage. First i send a text then that person answers with iMessage and then it works...

    Have you worked through the steps in the article below?
    Troubleshooting FaceTime and iMessage activation issues: http://support.apple.com/kb/ts4268

  • Mac OS X 10.6.8 won't recognize address starting with "macappstores"

    I'm trying to go to Mac App Store website, using Safari, to download the software I purchased but my I'm getting the following message:
    Safari can't open macappstores://itunes.apple.com (etc) because MAC OSX doesn't recognize addresses starting with "macappstores"
    I currently have Mac OS X version 10.6.8
    Any suggestions? This is very frustrating!

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Selecting numbers starting with 0, followed by [1-9]

    Hello,
    i'm using 9i (its a 3rd party software, i have no influcene on when they decide to upgrade...) on Unix.
    In a table i would like to select all rows whose column x has entries that
    - start with 0
    - have a digit between 1 - 9 following the 0
    So it should select rows with this value:
    012345
    098765
    034343
    044544
    But it should not select rows with values like this:
    000343333
    00-334-2323
    22---333--333
    AA--00--000000
    etc
    Can you please give me some hint ?
    Edited by: user590072 on 26.01.2010 00:46

    You should make a habit of posting CREATE TABLE statement, so we can play with your requirement.
    Does this work for you:
    SQL> create table t as (
      2  select '0012345' col from dual union all
      3  select '012345' from dual union all
      4  select '098765' from dual union all
      5  select '034343' from dual union all
      6  select '044544' from dual union all
      7  select '000343333' from dual union all
      8  select '00-334-2323' from dual union all
      9  select '22---333--333' from dual union all
    10  select 'AA--00--000000' from dual
    11  );
    Table created.
    SQL> select *
      2  from   t
      3  where  substr(col, 1, 1) = '0'
      4  and    translate(substr(col,2),'x123456789','x') is null;
    COL
    012345
    098765
    034343
    044544
    4 rows selected.

  • Need page numbers starting with chapter numbers.

    Hello  every one,
    I'm in the work of making  user manual with different autonumber paragraph headings.(eg.1.xyz,2.abc,......).I have applied a running head header and has to apply a footer with page number in the format paragraph heading autonumber. pagenumber.ie - 1.1,1.2,........and when  second paragraph heading starts it should be 2.1,2.2,.......i tried inserting variables like <chapnum>,<section num> but its not giving the desired o/p.How i can resolve this problem?
    Plz help me...

    crazdobe,
    If your goal is to restart the page numbering inside a single file, you are out of luck.
    Restarting page numbering with the beginning of a new section seems only useful if the heading of that section start at a new page; therefore you could just split the document for every new section and then control page numbering as you like.
    If I have misunderstood your requirement, please share more detail.
    - Michael

  • Powerbook G4 Titanium 15, 500mhz won't upgrade or start with DVD

    Hello
    I'll try to be brief!
    I have been given a Powerbook G4 Titanium 15, 500mhz. 256 mb RAM with a 20gb hard drive. It starts up OK from the hard drive with OSX 10.1.5.
    I'd like to upgrade the OSX.
    It will not start from a OSX 10.4 startup disk.
    If I connect to the internet and run and run Software Update it will not offer any software upgrade.
    If I start it as a target firewire disk and copy a 10.4.11 update .dmg to it's desktop from my Macbook Pro, then restart the Powerbook, the file disappears when I click on it. It may reappear a little later but will disappear again when clicked on. A usb flash drive will not mount when inserted into the usb slot.
    Can anyone tell me what's going on?
    Many thanks
    Howard

    Hello
    Thank you very much for your reply:
    What do you mean by "OSX 10.4 startup disk"? Is it the grey original system disk from another computer model? They are machine specific so that could be reason no.1
    Fair point – I thought about that which is why I then used a Tiger full install disk.
    If however its a full 10.4 retail disk you need 3Gb free space on your hard drive.
    The G4 has plenty of free disk space.
    Beyond that Software Update will only update within the version of OSX installed on the computer - in your case up to the final release of 10.1 Puma - 10.1.5 which is what you already have installed.
    Fair enough. That makes sense.
    The 10.4.11 update dmg you are trying to use is only designed to update an already installed earlier version of 10.4. If you want to install Tiger you will need to track down a full install disk if that's not what you already have.
    Yes, fair point. I may have been clutching at straws there after the full install disk failed to boot the laptop.
    Don't know about the USB drive - what's on it? Ideally you would run a hardware test on the PB - if you have the original install disk for the PB you'll find it on there.
    I know you can't boot from a USB by the way.
    I ran diagnostics on the hard drive when I booted it as a firewire target disk. A few footling details were corrected but nothing surprising.
    The big deal I think is getting data on to the hard disk and why does it vanish when you click on it?
    I'm sure I have managed to boot from a grey installer disk even if it does not then allow you to actuallly exeute the install. But this won't boot from anything and won't 'see' files tht have been saved to it. Puzzling.
    Thank you again
    Hoawrd

  • Insert numbers starting with one in each xml files sequentially

    The following is a sample of two of my xml files
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    </front>
    </article>
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="">
    </citation>
    </product>
    </front>
    </article>
    This is my source code
    public class ReadTexFile
         public void Go2Directory(String Directory)
                    File scan = new File(Directory);
              String DirList[] = scan.list();
              try
                   for(int i = 0; i < DirList.length; i++)
                        File ChkDir = new File((new StringBuilder()).append(scan.getPath()).append("\\").append(DirList).toString());
                        if(ChkDir.isFile())
                             dum1 = ChkDir.toString().toUpperCase();
                             if(dum1.lastIndexOf(".XML") > 0)
    String ExecFile = ChkDir.toString();
                                  File TexfileName = new File(ExecFile);
                                  ReadFileContent(TexfileName);
                                  fileCount++;
                             if(!ChkDir.exists())
                                  System.out.println((new StringBuilder()).append("NO FILES FOUND IN THE DIRECTORY").append(scan).toString());
              catch(Exception e)
                   System.out.println((new StringBuilder()).append("The Error Is in ").append(e).toString());
         public void ReadFileContent(File TexFile)
    try
                   BufferedReader br = new BufferedReader(new FileReader(TexFile));
                   String fetchline = "";
                   for(String line = ""; (line = br.readLine()) != null;)
                        fetchline = (new StringBuilder()).append(fetchline).append(line).append("00000000").toString();
                   br.close();
    cntr=1;
                   fetchline = RemoveIfAlreadyExist(fetchline);
                   fetchline = fetchline.replace("00000000", "\n");
                   File tmp = new File(TexFile.getParent(), "XmlFileTmp.xml");
                   BufferedWriter bw = new BufferedWriter(new FileWriter(tmp));
                   bw.write(fetchline);
                   bw.flush();
                   bw.close();
                   File org = new File(TexFile.getAbsolutePath());
                   System.gc();
                   tmp.renameTo(org);
              catch(IOException ioe)
                   System.out.println((new StringBuilder()).append("The IO Exception occured because ").append(ioe.getMessage()).toString());
              catch(NullPointerException npe)
                   System.out.println((new StringBuilder()).append("The Null Pointer Exception occured because ").append(npe.getMessage()).toString());
         public String RemoveIfAlreadyExist(String line)
    String res = "";
    int cc=1;
              Pattern Regex = Pattern.compile("<product>00000000<citation citation-type=\".*?\" id=\"\">");
              for(Matcher RegexMatcher = Regex.matcher(line); RegexMatcher.find();)
                   String chkEntity = RegexMatcher.group();
                   String subchkEntity1=chkEntity.substring(0,chkEntity.lastIndexOf("\">"));
                   String s1 = Integer.toString(cc);
                   if(s1.length()==1)
                        res = line.replace(subchkEntity1,subchkEntity1+"ref00"+cc+"");
                   if(s1.length()==2)
                        res = line.replace(subchkEntity1,subchkEntity1+"ref0"+cc+"");
                   if(s1.length()==3)
                        res = line.replace(subchkEntity1,subchkEntity1+"ref"+cc+"");
    cc++;
              return res;
    My output from my code is
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="ref002">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref002">
    </citation>
    </product>
    </front>
    </article>
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="ref004">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref004">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref004">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref004">
    </citation>
    </product>
    </front>
    </article>
    But I need my output as
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="ref001">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref002">
    </citation>
    </product>
    </front>
    </article>
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE article SYSTEM "abc.dtd">
    <article xyz>
    <front>
    <product>
    <citation citation-type="book" id="ref001">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref002">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref003">
    </citation>
    </product>
    <product>
    <citation citation-type="book" id="ref004">
    </citation>
    </product>
    </front>
    </article>Could anyone please tell me what modifications to do in my code.

    Hi sony,
    Since you are trying to replace the pattern of subchkEntity1,
    it replaces all the lines which contain ("<citation citation-type="book" id=")
    including(...id="refxxx...)
    & not ("<citation citation-type="book" id="") alone.
    So ,to eliminate this, we have to match the string with chkEntity &
    replace only the first occurance.
    I've modified the method RemoveIfAlreadyExist.
    It works fine now.
    public String RemoveIfAlreadyExist(String line)
             int cc=1;
              Pattern Regex = Pattern.compile("<product>00000000<citation citation-type=\".*?\" id=\"\">");
              for(Matcher RegexMatcher = Regex.matcher(line); RegexMatcher.find();)
                   String chkEntity = RegexMatcher.group();
                   int lastIndex = chkEntity.lastIndexOf("\">");
                   String subchkEntity1=chkEntity.substring(0,lastIndex);
                   String s1 = Integer.toString(cc);
                   if(s1.length()==1)
                        line = line.replaceFirst(chkEntity,subchkEntity1+"ref00"+cc+"\"");
                   if(s1.length()==2)
                        line = line.replaceFirst(chkEntity,subchkEntity1+"ref00"+cc+"\"");
                   if(s1.length()==3)
                        line = line.replaceFirst(chkEntity,subchkEntity1+"ref00"+cc+"\"");
                            cc++;
              return line;
         }

  • What about numbers that start with Zero

    When I enter numbers that start with Zero (EX: 08794) in a cell, Numbers automatically drops the zero. I WANT THE ZERO. How can I do that. I've tried changing the formula to numerals and automatic. Same thing.

    Numbers starting with zeros are usually "labels" rather than "numbers" used in further calculations. If that's the case with yours, the easiest solution is to set the format of the cells where the 'numbers' will be inserted to Text.
    An alternate, useful only if all of the 'numbers' are the same length (eg. five digit zip codes) is to set a Custom format for the cell(s).
    Use the Cell Format Inspector ("42" button in the Inspector) to apply either of these settings.
    Regards,
    Barry

  • I bough a refurbished iMac last year, unfortunately Im in need of a Logic board, but when I search FD093LL/A, no company seems to recognize this model but I do see all models, or at least most, starting with MD...whats the difference?

    I bought a refurbished iMac last year, unfortunately I'm in need of a new/used Logic board, but when I search and contact Company with Mac parts, no one seems to recognize FD093LL/A witch makes it tough to identify parts, but I do see most Part Numbers starting with MD. Any reason why?
    Thank you

    Refurbished models have a different order number. Replace the F with an M and see if the specifications listed match your computer’s.
    (115253)

  • Diagram starting with 100%

    hi everyone,
    I have the prices of the shares of 4 different companies collected over the last 5 years. to make the price development more  comparable i would like to draw a diagram which starts in 2006 with each individual companies then preveiling price equal to 100% . In the following years also not the prices should be shown but the relative price, e.g. 115% for comany A, 108%  for company B and 98% for company C. And so on...
    Is this type of chart possible somehow, or would I have to create new tables each normalising the prices and then draw the diagram from the adjusted data? I have to do this for some 30 tables therefore it would be great if I could use the absolute prices and have numbers starting with 100% and simply showing the prices of succeeding years as relative prices in form of percentages.
    Thanks alot already in advance.

    If you are starting might be better to look at 11g, which I understand to be substantially different.
    http://www.oracle.com/technetwork/middleware/bpm/learnmore/index.html
    But be aware that this is not for the faint hearted.
    Anthony

  • My ipod won't sync any of the music i downloaded and says that iTunes can't backup the Ipod because a session couldn't be started with the Ipod how do i fix this

    My ipod won't sync any thing in my iTunes library it always stop as soon as it starts backingup the Ipod a message appears that says iTunes cannot backup the Ipod "my Ipod" because a session couldn't be started withthe Ipod how do i fix this problem?
    This is exactly what the message says: iTunes could not back up the iPod "austins ipod" because a session could not be started with the iPod.

    Try connecting your ipod to another computer and sync only 1 file or song just for isolation purpose only to see if it'll sync.
    If still not syncing, then porbably you may have a bad iOS installed in iPod which is hard to see if it has a problem because you said nothing's wrong with iPod. I just saying is, it MIGHT have a bad iOS.
    If you are unable to do a restore, put your ipod in DFU mode, then connect to iTunes and iTunes will detect your ipod in restore mode. Press shift key (PC keyboard) then click the restore button on iTunes. I hope you have your copy of IPSW file for restoration purposes.

  • ? how to add page numbers in pages 5.2, starting with 2.  Pages '09 had an option to not show folio on page one.  Also any how to do left and right folios for a Tabloid?  Many trhanks

    ? how to add page numbers in pages 5.2, starting with page 2.  Pages '09 had an option to not show folio on page one.  Also any idea how to do left and right folios for a Tabloid?  Many thanks  . . .

    Hello jacquemac,
    Your first question:
    There might be a better way of achieving what you wish to do, but following these steps could help you out.
    You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
    1. go for Documents (right end of the Toolbar) -> Section
    2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
    (what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
    3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
    4. click on your second page (the first page of your second section) and  "Insert page number" -> start at 1
    Your second question:
    Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
    greetings jl

Maybe you are looking for