Sirigate: too much access from lockscreen
hi there,
we just "discovered" that you can access many features from out of the lockscreen with siri. with siri you can access lots of stuff from the lockscreen. just tap the home button for a while in the lockscreen and say for example "call 09876534321 " and it will call it. i used to be save from people finding/stealing my phone and try to do calls, send messages or access my calender and notes without having my unlock code. this is some serious secuity bug!! check this video... http://www.youtube.com/watch?v=1qWnNBXtrnA
You're really talking in circles now just to defend a blatantly wrong claim.
there shouldn't be a second security stage for preventing 3rd to access lots of information
1. Even with Siri lock screen active, only a limited number of actions can be done with Siri without unlocking the phone - Siri will ask you to unlock to complete the task. Pretty much the only things you can do is call by saying the number (unless the thief "knows" your contact names), SMS by #, or play a song.
THERE IS NO "ACCESS TO LOTS OF INFORMATION" EVEN WHEN SIRI RUNS ON THE LOCK SCREEN.
There are no "second" or "third" security stages. There are only options shown on the same where the passcode is set.
not being aware to be not secure if you set a password is another
2. Anyone with at least 2 digits in their IQ and is concerned enough with security to set a passcode will see Siri switch on the passcode page when they set it. Most people don't give a s*** which is why Apple defaulted to convenience. Being able to voice call on a locked phone while driving is VERY important to a lot of people.
Similar Messages
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I cannot get the canon pixma ip90v to work with the computer.I get a message about drawing too much power from the usb.
You need to plug in the power cord that was included with the printer and then use it with USB, or use the power cord included with the printer and access it wirelessly from your iMac. I access my Canon MP560 wirelessly from my iMac, which works well.
-
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
Here is the total error message:
"Because a USB devce was drawing too much power from your computer, one
or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device drawing too much
power has been disabled. Other devices may have also been disabled.
When you disconnect the device drawing too much power, your other USB
devices will be enabled again."
Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
It deactivates so i cannot use it.
I have tried:
Connecting the soundcard to my mothers mac -> it worked!
Connecting an external harddrive to my mac -> it worked!
so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
I don't know what to do! i really need this to work! anyone got an idea??Hi, ryankeenanrk.
Thank you for visiting Apple Support Communities.
I would recommend trying the steps in both articles below and test the results.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
Jason H. -
Hi,
I am getting this error since recently when I am using my MBP:
"Because a USB device was drawing too much power from your computer..."
The 'funny' thing: there is no USB device attached to the computer (only power and monitor cables).
Why is this happening and what could I do about it?
Appreciate your ideas?It's probably an internal hardware fault, but you can try this:
Intel-based Macs: Resetting the System Management Controller (SMC) -
I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!
The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
-
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Because a USB device was drawing too much power from your computer - bla, b
In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean
-
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
Maybe you are looking for
-
BB 8900 Yahoo email CR not displaying
Is it me or is anybody else experiencing this issue: When navigating to Yahoo and trying to compose a message from within the browser window, I can begin to type my message and view it, however when I hit the [enter] key on my bb I don't see the car
-
Iphone 4 disabled connect to itunes cant restore
My 4 year old entered my passlock code too many times now it says my phone is disabled and i need to connect to itunes. I have backed up my phone and connected to itunes before but now for some reason itunes is not seeing my phone when connected?? I
-
Exception in thread "main" java.lang.NoClassDefFoundError: utils.CertGen
I want to set the environment by using the setWLSEnv.sh shell in linux OS. Then execute the "java weblogic.utils.CertGen" the below error is occurred. [root@loaclhost ~]# cd /oracle/Middleware_1033/wlserver_10.3/server/bin/ [root@loaclhost bin]# ll t
-
Apple software updater could not be found on my desktop
i have tryed to update my software updater and the updater path cannot be found but when i go to remove programs it wont let me remove the updater or itunes itself it cant find the installer itself and also when i try and reinstall itunes from the se
-
Sales Order IDOC on creation and on modification
Hi All, I need to generate an IDOC each time i create a sales order or change a sales order. Please tell me what all the settings should i do in NACE Transaction. As this is an urgent requirement, pls reply fast... Thanks in Advance, Anil