Sirius Internet Radio doesn't work after Snow Leopard

Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
[email protected]

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

The Firewire Disk don't work After Snow Leopard 10.6.1

Dear Apple friend
I've a big problem... I've 6 firewire external hard disk (400 and 800) with my work.
And now I can use it after Snow Leopard update to 10.6.1.
How I can resolve it???
I need to work!!!!
thanks
Walter from Italy

Have you reset the FireWire bus? Did you try a different cable?
If so and things still don't function properly your only choice may be rolling back the system.
If you search these forums and with Google you will find lots of issues like these. If you need these disks to work your only choice is to roll back your system software.

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Dictionary App doesn't work with Snow Leopard

Hey, just upgraded my Macbook from leopard to Snow leopard and now the apple dictionary app is too out dated. Where can I find an update for this app so that it'll work with snow leopard?

Not sure why the proper Dictionary didn't install with the upgrade. One option is to install it now from the disc using Pacifist.
Read Kappy's instructions for using.
https://discussions.apple.com/message/12278861?messageID=12278861#12278861

MPEG-2 Playback not working after Snow Leopard upgrade

Something I need all the time is MPEG2 playback in Quicktime and to ability to convert from MPEG2. in MPEG Streamclip.
What I have found out is Snow Leopard deletes the file in library/quicktime when you install.
I have followed the instructions to go back in the time machine, get the file, restore it back into the library/quicktime file
Done all that, rebooted etc....still nothing
I have also found the quicktimeMPEG2 components installer and that doesn't work either
I desperately need this to work as my business relies on it.
Any help appreciated
Cheers
Paul

What error message do you get with the dmg installer? I have just tried an MPEG2 file, after upgrading to SL, QT reported it required the meg2 component. I found the original dmg file I purchased and it installed OK and works with QT 10.
Before trying to install again it may be worth repairing permissions on you disk.

Airporter does not work after snow leopard upgrade

I upgraded my old macbook to snow leopard, and the Time Capsule can not detect the disk drive on the Airporter. The laptop has no problem using airporter to get to the internet, and the airport utility can see the disk drive. After the install of snow leopard, I saw the time capsule, and it asked if I wanted the file recovered from the time capsule. This seemed to work perfectly, and made the upgrade painless except my time capsule does not work anymore.

I have the metadata.mds.plist but I do not have the Spotlight.plist as well. Regarding a fix, I had a similar issue with Spotlight's index when I upgraded one of my iMacs. A clean install, properly resolved the issue. I'd be curious if a reinstall of Snow Leopard would take care of the issue, as the A&I feature isn't there anymore I've yet to determine what exactly the install of SL over SL would do. My understanding is that the A&I is performed, it's just not called as such.

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

HP Laserjet 4V/MV doesn't work in Snow Leopard

I ran software update which installed new drivers for HP and Epson with OS 10.6.1, but my HP 4MV (on my network) still doesn't work (was always automatically recognized before). I've spent 2 days trying everything to get this working. If someone at HP is reading this, PLEASE...new driver for this that works!

There is nothing that we can do. The problem you are encountering is that AppleTalk is no longer present on Snow Leopard. There are many many threads here on this issue. You'll need get your device hooked up to the Network (and NO, AppleTalk does not count) to get things working.
How is your device currently connected?
Just trying to help.
Andrew

Photo Editing, Photoshop elements 4.0 doesn't work with snow leopard?

Tried reinstalling photoshop elements after upgrading to snow leopard and message came back not compatible. ? , what version is that doesn't break you wallet and can do some decent photo editing including cutting and removing parts of images, pasting, etc. thanks

The latest version, 8, can be had for around $79, and is an amazing editor for the price. If you're not familiar with it's features I suggest you visit the site and see what it can do. Here's a list of several editors that support layers for editing:
Image Editors that support the use of layers:
Photoshop Elements 8 for Mac - $80
GraphicConverter- $35
Rainbow Painter - $30
Acorn- $50
Seashore- Open Source
IMO PSE gives you more bang for the buck. If I didn't have Photoshop (given to me) I would buy it in a second. Version 8 has more features that I use than PS CS3.
OT

IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

To anyone with an HP printer/scanner device,
After being frustrated with my HP Photosmart C4580 not being able to scan for over an hour (scouring the forums, HP's website etc), I've come to realize my problem. Note that this has only been tested on a device that is plugged in DIRECTLY to your mac. I have not tried this over the network and do not plan to since my house is not set up for that.
Anyone who is having any issues with their device, UNINSTALL the HP software. The software is simply incompatible with SL and will mess up your devices! HP even says so on their website (see link below)!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
This is easily done by going to your applications folder > Hewlett Packard > HP Uninstaller. After using the uninstaller to uninstall HP's apps from your computer unplug your scanner from your computer and power supply. Now to make sure there are NO printers registered with your computer that could possibly mess up the fresh driver install, go to System Preferences > Print & Fax. Right click anywhere in the left pane (where any printers you have/had installed will be located) and click "Reset Printing System". This will wipe out any traces of a printer so you can start a-new.
Now, restart your computer. After it is restarted, plug your printer into the power source, then when it is fully booted up you may plug it into your USB slot. Then, go to System Preferences > Print & Fax. Click on the "+" (which will give you the interface to add your printer), select your printer (which you should note will say "USB Multifunction" instead of "USB" which is what showed up with the HP software still installed), and click "add". Your mac will do the rest (installing the drivers and such) and you should be able to print & scan as usual.
Note that you will need to scan using Preview, Image Capture, or your Printer Queue due to the changes with Snow Leopard (see the HP link above to learn how to use these). Your device should now properly show up when you use these applications to try and scan now.
-Mike S

@lakewood - there is nothing specifically in Software Update if you upgrade from Leopard to Snow Leopard. For me anyway..seems like thats the case for everyone though.
@ruger - so it won't even let you hit the '+'? For me, I had to hit the '+' to get it to install which in turn automatically downloaded the proper software/drivers for my device. if i were you, i'd see if i could get that to happen and hit '+' to install it. also - make sure you don't have any of the HP software on your computer also (use the uninstaller provided!)..that was really what did the trick for my machine. HP has come out and specifically said to not use the device manager, but that didn't quite do it for me. i had to uninstall everything that came on that CD (its all located in applications > Hewlett-Packard and, like i said, can be uninstalled easily using the provided uninstaller).
if all else fails, what i've also heard helps is just to reinstall snow leopard. that'll make sure everything is fresh. i'd delete all your printers like i outlined in my first post first THEN reinstalling it if you wish to go that route. however, it really does sound like the driver is messed up if its pausing and works fine with time capsule. idk how old the printer is, but sometimes with older models, the support blows. i apologize if none of this helps whatever the reason for your troubles may be, though.
Good luck,
-Mike S
PS: printers are always terrible to upgrade on everyone's end. consumers, operating systems, and manufacturers. it stinks that nothing can be generic and run similarly anymore =/

Rayv Player on FoxSoccer.TV doesn't work on Snow Leopard

Since upgrading to Snow Leopard, the rayv Player for this website doesn't work. I've tried running Safari in 32-bit and also tried Firefox. At most, I get some sound, and then the browser crashes. There seems to be an issue with FlashPlayer 10.
Does anybody have a solution for me?

From the SL review at arstechnica...
"The sleeping Mac dilemma
I don't like to leave my Mac Pro turned on 24 hours a day, especially during the summer in my un-air-conditioned house. But I do want to have access to the files on my Mac when I'm elsewhere—at work, on the road, etc. It is possible to wake a sleeping Mac remotely, but doing so requires being on the same local network.
My solution has been to leave a smaller, more power-efficient laptop on at all times on the same network as my Mac Pro. To wake my Mac Pro remotely, I ssh into the laptop, then send the magic "wake up" packet to my Mac Pro. (For this to work, the "Wake for Ethernet network administrator access" checkbox must be checked in the "Energy Saver" preference pane in System Preferences.)
Snow Leopard provides a way to do this without leaving any of my computers running all day. When a Mac running Snow Leopard is put to sleep, it attempts to hand off ownership of its IP address to its router. (This only works with an AirPort Extreme base station from 2007 or later, or a Time Capsule from 2008 or later with the latest (7.4.2) firmware installed.) The router then listens for any attempt to connect to the IP address. When one occurs, it wakes up the original owner, hands back the IP address, and forwards traffic appropriately."

Aperture 2.1 Trail doesn't work on Snow Leopard

Hi just downloaded and installed the Aperture 2.1 trial version. Install goes fine, however when I try to run it I get the following error message.
"You can't use this version of the application Aperture with this version of Mac OS X."
I know there is a 2.1.4 update released August 27, but I can't download it with a trial key. The update states "This update addresses general compatibility with Mac OS X v10.6 Snow Leopard" and I assume the Trial version is not 2.1.4 since it doesn't work.
I personally am not going to pay $200 for software I can't try before I buy. If there is any way to get the update to apply to the Trial, a Snow Leopard compatible trial version please let me know.
I find this very sloppy of Apple who I have found to be above these types of issues until now.

Hey found a 2.1.4 Trial install on Softpedia. I don't know how they got a copy that can be downloaded without a key, when Apple doesn't even provide it on their own site. Anyway the link is below if anyone else is having this issue, you will still need to get a trial key from Apple to use, but it works.
http://mac.softpedia.com/progDownload/Apple-Aperture-Download-13035.html

Can't get some websites to work after snow leopard install, java maybe?

I'm a day trader. I use TD Ameritrade every day to work on. I believe the real time streamer and level 2 quotes are all java based.
This past weekend I did the Snow Leopard install on my computer. Until this morning it seemed like all was well.
I go to ameritrade and try to log in and it keeps saying it doesn't recognize my log in. I called them and they are able to log into my account so its my computer. I went to the java preferences and there use to be a lot of java types there now there are just 2, could that some how be it?
Any suggestions?
Susan

Safari is a 64 bit application, is it worth starting the app in 32 bit mode and testing if it is any better.
use finder and highlight Safari in the applications directory, do a get Info (cmd i) and tick the 32 bit mode box and restart Safari.
If it does not help remember to revert back to 64 bit mode.

Automator app made in Mavericks doesn't work in Snow Leopard

Made a simple troubleshooting app for my staff with some dialog boxes (ask for confirmation) and an app restart (killall and open commands). Saved it as an app and it works fine in Mavericks and Mountain Lion. On Snow Leopard, the app opens with the opening file animation but does nothing. It never even shows up in Activity Monitor.
Did I miss a setting somewhere or is Automator just not backwards compatible like that?

Some workflows will work well going from 10.9 backwards to earlier OS / Automator versions but there are going to be many workflows that don't work without modifications. Part of the issue will be file system arrangement as you suggested.
Another source of problems could be that the behavior of various workflow actions may change from one version of Automator to another. Several of the Address Book / Contacts related actions, for example, no longer work the same way that the did. This was true even before the name of the Address Book was changed to Contacts.

Sirius Internet Radio doesn't work after Snow Leopard

Similar Messages

Maybe you are looking for