Sis and ke30 new condition from pricing

hello
I created new price condition in pricing ZSKO
and I need to see it as a separate value in MCSI and in KE30
how to do that ?

Hello,
transaction MCSI is for statistics.
I you want to see a condition in your statistic infostructure, then you have to save the condition in a KZWI1 .... KZWI6 field.
Then you can create your own infostructure/updating rules with this new field.
I hope this will help you.
Regards
Claudia

Similar Messages

New condition in pricing procedure in Sales Order

Dear SAP Gurus,
I want to add one new condition in pricing procedure in Sales Order.
Earlier we were having following conditions.
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU    (Education tax)             3%(on ZSER)
ZEDT                                        100% sub cond on ZEDU
Now I want the structure to be
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU (Education tax)               2% (on ZSER)
ZEDT                                        100% sub cond on ZEDU
ZHED (Higher Edu. Tax)             1% (on ZSER)
ZHET                                        100% sub cond on ZHED
For this I have Done following Customizings
Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
Maintained pricing procedure with these conditions.
Made condition Record for ZHET through VK11.
But I am not able to set ZHED as 1 %
Please guide where to configure this and how ?
Thanks & Regards
Rajesh

Hello,
Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
Prase

Some how do not enter sign was added beside contact, now all messages previously received messages are gone and no new messages from this sender will appear.

I have been receiving messages from this sender fine and then all of a sudden for some reason there was a do not enter sign beside her name. I didn't know how or why it got there, some button got bumped or the mouse, and I didn't know how to take it off so I just left it. Since then, thunderbird has been reopened and all messages that I had received have disappeared and no new messages from this sender appear even though I know she has sent them to me. I have checked into filters and I have none set so it is not that. I can't figure out how the do not enter sign got beside the contact, but I'm sure it's the reason for my problems and I don't know how to fix it. Thanks

In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Step for Adding new condition in Pricing procedure

Hi,
We have different pricing procedure with different condition , in this procerdure i want to add one new condition at 2 position and the requirement is that if system found the value with this condition it should skip the 3 step and directly go to 4 step can u give the step for this how to add new condition to this procedure.
regards,
zafar

I think you need to use condition exclusion so if the condition at step 2 is found then step 3 becomes inactive if it is also found.
Depnding on your pricing keys, you might be able to add a step in the access sequence on step 3 and only use a single condition (V/07) and marking that step exclusive if a record is found.

Assigning of excess sequence to condition and adding New condition in Prici

Hi,
We have different pricing procedure for our baisc price present there is no excess sequence assign to it now as per our requirement i have created a new contion table and have assign that to a excess sequence I want to know is there any problem if i assign that Access sequence to conddition what can be the problem ,
and 2nd case
I want to create new condition what is the total process to assign that new condition to our exsiting pricing procedure.
regards,
zafar

Dear Friend,
there is no problem when you assign the access sequence to the condition at the time you are going to maintain the condition in MEK1 transaction it will ask the different combination
for example material /vendor combination, or material plant combination, or else what accesses your maintained for that access sequence it will ask
in the case of maintaining the conditions in the pricing procedure check the on what the value has to be calculated which step and which counter your assigning the condition based on that it will calculate the value for that condition
Regards
Pramod

PS CS5 and 3D (new volume from layers) problem

OK I dont know if my issue is hardware related or user error so any help is appreciated.
Im trying to use the "New Volume from Layers" function (under 3D) with 2 text layers selected and the function is greyed out. How can I fix this? I do have open GL enabled.
I am following a tutorial from MAX 2010 Corey Barkerwhere it is used.
http://tv.adobe.com/watch/adobe-max-2010-photoshop-sessions/tips-techniques-for-creating-j awdropping-effects-with-photoshop-cs5-extended/
Laptop
Gateway NV59
Core i5
4 g ram
Intel graphics

Over time, and with some different "incidents," the Preferences file can become corrupt. In PS, I have only had that happen once over decades, and it was when a program decided to update, while I was doing a Save of a very large PS image. In that case, the Ctrl+Alt+Del, while launching PS brought up the "Do you want to reset your Preferences to the default?" message, at which time I chose yes, and all was good, except for the work that I was doing the Save for, but I had a Save_As_a_Copy, so only lost about an hour's work. I figure that one "trashed Prefs" file since version 2.5, with almost daily use is not bad.
PrPro has the same "three-finger-salute," or you can go to your Preferences file and either Rename, or Delete that - just like PS. Just remember to hold down those keys during the entire launch cycle. I do not believe that PrPro has that dialog screen, asking if that is what you wish to do, but I believe that it just clears the Prefs, and resets to the default. Never had to trash my Prefs in PrPro, but several users have, and it has fixed some odd issues.
Good luck,
Hunt

How to delete all the events and create new events from scratch?

I have all my photos separated into albums and I would like these albums to be considered events in iPhoto. The problem is that there are already lots of events in my iPhoto library that are not "real" events. It just so happens they were uploaded at a certain time and during one of my upgrades of iPhoto all these different uploads became different events. Of course, there are some albums I would like to become a single event as well...but I am not sure how to strip all of my photos of events and then add the photos to new events?

Select all the pics in an Album and Flag them.
Then go Events Menu -> Create Event from Flagged Photos
A new Event is created that moves the pics from their existing Event
Unflag the Photos then move to the next album. Repeat.
Regards
TD

How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone

How can I remove both the old (deprecated) sync account and the newer one from my device?

I want to remove both of the two Sync accounts from my device's system settings.
I'm using a kitkat based ROM: CM11 on a Samsung S2.
Thanks.

Thanks. This is what I tried before asking here, but now it worked because I removed the deprecated account first. Then, after a couple of crashes by the Exchange Service, both the profiles are gone. After all, CM11 are nightlies. :)

HT1386 My husband and I both upgraded from the 3 to the iPhone 4. When activating them, it copied all of my stuff to my new phone. Then we did my husbands....and he got all of my stuff too! Instead of what was on his old iphone 3. Help. Please.

My husband and I upgraded from the iPhone 3 to the iPhone 4. I activated mine and all was good. I activiated his and while syncing....instead of transfering his contacts, apps and ect. All of my contacts, apps and ect. were loaded on his phone as well. How do I change this. Please help. Thank you!

At this point it would be best to restore both phones. Do backups of both old phones, and restore new phones from those backups. (make you choose the correct backup for each phone or you'll back were you started).
You can use multiple devices with the same computer, and even the same itunes library. Howevever, it may be easier just to set up seperate user accounts on the computer for the future.

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

IMessage: "Start New Conversations From" setting is ignored

In my iMessage settings, I have the option set to start new conversations from my email address instead of my phone number. I don't want anyone having my phone number, so this is a VITAL feature for me.
The problem is that the setting is IGNORED! New conversations are in fact coming from my phone number. I have tried changing the setting back and forth, even wiped my phone and started from scratch, and still, new conversations come from my phone number instead of my email address.
How can I get iMessage to acknowledge the setting and start new conversations from my email address?
Thanks!

This worked for me. Turn off iMessage in Settings---> Messages. Then turn off iPhone. Restart iPhone then turn iMessage back on. The phone number should reappear.

New layers from line sections?

If I have an outline on a transparent background, perhaps like a bunny, with the outer line and internal lines defining sections. I want to make new layers out of those sections filled in, different layers for each section. The way I've been doing it so far is to create a new layer, then either fill over the area and erase what isn't in the section I want, or else draw over the outline of the section and flood fill it in. Either way this takes a long time. I tried filling in the section with flood fill, using magic selection, and make new layer from copy, but the problem becomes that the edges of the inner section aren't right to the edge of the line and this is visible with what I'm filling with (often solid colors), which is why I drew over the edges on another layer because I can place the outline on top and the underside isn't seen.
Is there a faster way to do this?

Outline starts like this:
Goes to this, with each color on a separate layer:
The yellow layer looks like this:
The whole thing looks like this when finished, colors still on separate layers:

New infotypes from form are displaying in black font instead of red

Good day,
I recently created a new form where a manager can submit a form to change their employee's work schdule infotypes in MSS.
The form can be successfully processed through workflow and the new infotypes from the form are populated in PA40 when executing the corresponding PA40 action.
The issue is, for all other forms when a new infotype is pulled into PA40 in SAP ECC the data is displayed in red font (making it easy for the data processor to see which feilds have been updated by processing the form). For my new form, the data is successfully pulling in but the font is black.
How do I change the font of the new infotypes to pull in as red instead of black? Is there a setting/config somewhere that I have missed?
Thanks,
Christine

Hello,
Is this a workflow question? If not, you may get a quicker and better answer in another SDN forum.
regards
Rick Bakker
hanabi technology

New sequence from clip does not apply the Pro Res Compressor...

I wanted to test Premiere to see if it could handle Pro Res videos (which after some initial research, I read that it can). So to see for myself, I imported a Pro Res 422 video, right clicked the clip and selected "New Sequence From Clip"... But it does not seem to apply the Pro Res 422 compressor...
The video is originally HDV and I converted in Compressor to 422...
I know it may be pointless to convert HDV to Pro Res (not to mention that the HD clips weights 45 MB and the converted 205 MB, although in FCP the pro res is less taxing on the system as opposed to HDV, not sure if the same applies with Premiere)... But I will be receiving from pro res files soon, and I want to make sure they work properly in Premiere.
Thanks

Being a recent FCP devotee I will see if I can interpret what this person expected.
By dropping a Prores 422 clip on the Make Sequence button, I will hazard a guess that he expected to see a Prores 422 sequence created. In the FCP workflow that is the desire sequnce to play that clip in. What he is seeing in the second image (the sequence settings) is an AVCHD 1080 anamorphic sequence. And hes not sure why its not Prores.
Im sure once he reads the links Todd provided he will understand he is not in Appleland anymore and that there is a different workflow with PrP.
How did I do? ;-)

Sis and ke30 new condition from pricing

Similar Messages

Maybe you are looking for