Site "changed" when moved to server...

I'll try and make this short. I attempted to finally move my new site to my remote server/hosting co. When doing so, instead of the site looking like it did when I repeatedly previewed it while making it, all I get is a jumbled mess with just text, none of my images, and it is not the width that I made it either. Yes, I did move the entire site there, in case someone was wondering. The person at my hosting co. said it could be a Dreamweaver issue, but I've gone back, checked everything, previewed again, and even tidyed up my folders and moved it back. But, I'm still getting nothing that looks like my site when I upload the index page to the server. (I've left it up for now; monkpromotions.com, if someone wants to take a look).
I know this is somewhat vague, but as a true novice who has spent months building this site, at this point, this is beyond me, and a bit frustrating.

Mark,
Thanks for your help, and it was VERY helpful to solving most of my issues. Except one, and I'll do my best to have this make sense. I still have some adjustments to make, and I've already done quite a bit. These changes to CSS and HTML after checking with the links you gave me did wonders; but ONLY concerning IE. It looks correct in IE 8 with still some issues in IE6, I think.
Then comes Firefox. I have made many changes, put them back to the server to check it, and throughout this whole process, as IE looked better and better, my index page through Firefox did not change ONE time. It's almost as if FF is frozen in time. In fact, from the very first time I loaded my new site on my server, it has looked the same on Firefox, and to make it even stranger, some of the text is not even the correct class that I have them under in Dreamweaver.
I have checked browser compalability and validated my index page over and over again after I made every change, and no problems are showing up. So, now I'm really stumped! Again, every link works ( on both browsers), and on IE it looks exacty like I have it set up (thought I'm still tweaking it to make it look better). I just don't have any idea what to do at this point. Any ideas as to why it has never changed how it looks on FF? Could it be something with my computer (I use ff for my browser)?
Again, monkpromotions.com is my site. Try it on both browsers and see the difference. Thanks Mark and anyone else.
I wanted to add something else real quick. I have my site at a fixed width of 915 px with a header, footer, l and r sidebar and main area; and you can see how it's supposed to look on IE 8.0; so you can see on FF it is not contained to that parameter and is spread out, besides being "jumbled" all over the place. Just an fyi.

Similar Messages

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Layout of site changes when I publish it?

Hi there,
I have just updated my adobe muse site but when I publish it through the FTP host like I usually do, the layout changes?? When I preview it, the site is fine but it just isn't publishing correctly.
Here is the site www.thspa.com.au
Thank you in advance for your help
Kindest regards,
Hannah xx

Thank you so much for getting back to me : )
I exported it as HTML and it opened fine...looked perfect??? Could it be an issue with the host?? The titles are on a wierd diagonal when I open it in the browser??? I have even uploaded it to the FTP host a few times coz I thought it was just a one off glich but its still playing up?
www.thspa.com.au is the website.
Kindest regards,
Hannah

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

Cannot save changes when enabling Publishing Server

I have Contribute 4 with Contribute Publishing Server 1.11.
I'm able to setup normal Contribute sites fine and was able to
setup one Publishing Server site. Now though, whenever I try to
enable Publishing Server on a site, it enables alright but when I
close the Site Administration window I get an error that says
"Contribute cannot save your changes to the website's shared
settings on the server".
I've tried checking permissions; everything seems 'liberal'
enough like Contribute likes it. I've reinstalled Publishing Server
(including deleting any _mm folders). I've attempted deleting and
re-adding sites more times than I can count. Nothing has seemed to
make a difference. Has anyone experienced this problem or have any
ideas what might be going on? Thanks very much!
Nathan Williams

Hello Nathan, I'm using Contribute 3.11 (without Publishing
Server) and I'm experiencing the same issue: "while trying to setup
the admin password".
It seems to me that this is a bug from Macromedia... and
hopefully they will respond to us.
Alan Q.

My preview site displays correctly but my live site changes when I publish it

My issue is that the preview site displays correctly however when I upload this information to the live site, the format changes and displays incorrectly.

Hi,
Are you creating the site in Muse and publishing it to BC.
If yes, can you go to File > Export as HTML, export the file to a folder on your computer and check it if you are getting same issue.
Regards,
Gaurav Aggarwal

.swf timing changes when posted to server

I have been using Captivate for years, and have never seen this error before. I currently have Captivate 3. I have a 6 slide file with a mix of PowerPoint imports and captured movies. On the last slide, I have an imported PowerPoint animation where I use the Credits Custom Animation on a text box to scroll a list of report names across the screen. The end effect looks like movie credits.
Here is the issue: The timing of the credits is perfect when I play the published files from my PC. I send it to my network admin, and it plays perfect when she runs it from her PC. But when she uploads it to our Windows 2003 Intranet server, the timing of the movie is off. The credits finish rolling way before they should. So it seems like maybe the file is playing too fast?
Once recent change we made to the server was to add the .flv file type to the Mime directory. I don't know what that means, but I know we weren't able to get .flvs to play until we did this about a month ago. An earlier version of this file had been on the server prior, and we didn't notice an issue. But I had to change the audio and now that we've reposted it, we have this problem.
Also, I upgraded my Vista machine to Windows 7 last week. I only have one problem with Captivate since the upgrade. I can't hear the audio when I play the slide in edit mode. But I do hear the audio when I preview the project. I don't think Windows 7 is causing my current problem with the .swf.
So it stands to reason that one of these recent changes might be the culprit. But I thought it was worth posting here in case any of you have seen this before. Here's hoping!!!
Thanks in advance!
Kelly

I'd like to post a link, but like I said, it's only internal.
When I look at the HTML, it's set to black (background-color:
#000000). Also, when I load it, the page itself is black, but the
background of the Flash *only* has turned white. I can load the
exact same page on my local drive and it comes up black. I've got
publish settings to Flash 8 (my version) and AS 2.0. I checked that
first because I've published lower in the past and had
issues.

Sound changes when moving mp3 from quicktime to itunes

When I move a mp3 from quicktime to itunes the sound changes. itunes makes it sound a little worse from the original mix. I dont think its the equalizer becuase i tried fooling around with that and tuning it off for a better result.
So the mp3 sounds perfect in quicktime but terrible in itunes whats my problem?

I figured out that if i bring it into itunes as mp4 instead of mp3 it sounds alright.
So you are not moving the MP3 from QT to iTunes as you wrote in your first post. You are converting from AAC to MP3.
i tried to burn it and i think it automatically converts it back to mp3 for the burn
No.
If you have audio CD selected in iTunes prefs -> Advanced - Burning, it will convert them to an audio CD.
It willnot convert any other time unless you tell it to convert.
is there a way to burn it while maintaining the mp4 quality??
Select Audio CD or Data CD and it will burn an audio file or the MP4 file.

SWF background color changes when uploaded to server

I built my Flash all pretty, based upon a black background.
When ran on the local copy, the black shows up as black & the
Flash is like it should be. However, as soon as I upload it to the
server and run it from there, the Flash background changes to
white, which as you can imagine, royally screws up the visuals. Any
clue as to why it would do this?! I can't think of any reason why
it should. The server is in-house and will only be used for an
Intranet page, so any possible corruption over the web should be
negated. Help!!

I'd like to post a link, but like I said, it's only internal.
When I look at the HTML, it's set to black (background-color:
#000000). Also, when I load it, the page itself is black, but the
background of the Flash *only* has turned white. I can load the
exact same page on my local drive and it comes up black. I've got
publish settings to Flash 8 (my version) and AS 2.0. I checked that
first because I've published lower in the past and had
issues.

Unwanted image size change when moving a image it's Tab to another Tab in CC 2014

Hi, I opened a photo with a physical size 16"w 36"h. Since role paper comes in 24" width, I proceeded with expanding the canvas size to 24"w, height is unchanged at 36". Then I opened two photos in separate tabs in Photoshop, changed the image sizes to 8"w x 12"h. One Photo is from a 36megapixel camera and the other from a 16megapixel camera. Created two layers in the 24x36 image tab. Then I proceeded to copy each photo and paste in each of those layers (one image per layer in case you’re wondering). The problem is as follows, the copied images are larger when pasted into those layers, 10” wide and not 8”, 14”high and not 12”. Thinking maybe the canvas size had something to do with this, so I made that change. The result was the same, larger when pasted into those layers, 10” wide and not 8”, 14”high and not 12”. Could someone please advise what I’ve done wrong? Note, the ruler bars are visible. Thanks

When you bring one image into another, it is the pixel size that counts. The physical size of the source image becomes irrelevant.

Placement of objects on html page change when loaded to server

I'm having an issue with the placement of my header on my "Gallery" page when it is uploaded to the server. When I open the file in Firefox and Safari it opens normal, with the header on top and the images for each gallery below (I have yet to add links). However when I access this page through the server in safari it flips the gallery images and header but NOT with Firefox. As a note, I've played around with the css a bit trying to solve the problem and I could imitate the issue when I removed the absolute position from the div "gallerycontent".
Here's the link
http://frozentimephotos.com/english/gallery.html
Thanks,
Giuseppe

Most browser rendering issues are code related. Validate your code with the tools below and fix reported errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
HINT: You have 2 sets of <body> tags in your markup. In code view, remove this from line 12:
<body bgcolor="#000">
And remove this from line 37:
</body>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Appearance of images changes when moving from ACR to PSE11 Editor .. why?

I run Windows 8.1 x64 bit on my new PC and use PSE11 which opens raw files automatically into ACR. Once I've finished editing an image in ACR I then click on 'Open Image' which transfers the part edited file to the PSE11 Editor. Once there I perform a few additional tweaks before cropping, sharpening and saving as a jpeg.
At about the same time as I installed PSE11 onto my new PC I became acutely aware of a change in the appearance of my images as they transferred from ACR to PSE11 Editor. Having performed the basic adjustments in ACR and things are to my liking, the image now opens in PSE11 Editor looking rather washed out by comparison .. less contrast, maybe a little more brightness and a certain degree of reduced colour saturation.
Obviously all images are seen on the same monitor, so any fingers pointing at calibration issues don't count in this instance! I just need to know if there is a fix that will return me to the situation I've always had before, where the part edited ACR image looks the same when it opens in the PSE11 Editor. I have been using PSE in various versions for a number of years and this is the first time that I've experienced this irritating problem.
Help, please!

CanonMan49 a écrit:
Thanks for your reply Michel ...
The colour setting in both Editor and Organiser is: 'Always Optimise Colours for Computer Screens'
I believe this option will select the sRGB colour space by default and that the option 'Always Optimise for Printing' will default the colour space setting to Adobe RGB. Is this so? I only print occasionally (most of my viewing is on the monitor or the TV) but it would be nice to know if the chosen colour space chosen produce this odd effect I'm experiencing (although I sincerely doubt that it's got anything to do with it).
This option will be used by the ACR conversion module to set the colour space of the file imported in the editor. So, you are right, the sRGB colour space is a good choice for you. What's good is that the raw file itself has NO colour space. If you have edited a raw file for sRGB, good. But you can set your editor to 'optimize for print', and you'll get an aRGB version for printing. Worth a try if you have a good printer (mine is an all-in-one with 6 inks and I can see the difference for some subjects).
My camera (EOS 5D MkIII) is always set to sRGB. Is this significant?
No for raw files. That's used only for the in-camera conversion to jpeg. It's a simple tag which is ignored in the ACR conversion process (see above).
The main issue though remains, namely the fact that part edited images look washed out in PSE Editor in spite of looking just fine in ACR a split second earlier, so I'm still looking for a remedy.
Such a difference is often noted when a file with aRGB colour space is seen in a software that believes it's sRGB. Nothing in your worklows seems to explain that.
Do you see a difference when you see the same edited picture in a non colour-managed software? I can't help you more for the moment.

Audio clips change when moved from sequence to sequence in FCP7

Working on a documentary piece within FCP7 and am having problems with moving audio from one sequence to another. Both sequences have the same settings, but when I copy the audio clip and paste it into the new sequence, the audio that pastes is from the same clip but is not what I copied. Does anyone know why this is happening and/or how to fix this?

Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
x

Swf useless when moved to server - Please help

I publish test.swf and test.html to mydoc folder on my local computer. Mydoc folder also contains the test.flv that was imported to the flash to create the swf and html. Open any of them in the mydoc folder and they work fine, move the swf or html files to another folder and they work. Move the flv file,even keeping it with the other files, and they don't work. The main problem is that the swf will not work after uploading all to the same folder on the web server. Any help will be greatly apprecitated.

I don't know. If I email the two files, swf and the flv, to my wife's laptop, they won't work. I emailed her two other files, another swf created by someone else and the accompanying flv, and that swf opens and plays the flv if you double click it. I guess my question straight out is, do I need to make the swf portable during/before publishing? The swf seems to only look for the source flv in the folder/directory that I first publish it to, instead of the relative/same folder, and I don't think that I can publish it straight to my server which I think would work. I have to publish it to a predetemined folder on my desktop, then ftp the files to the server directory which then leaves it inop. Any ideas?

Video changes when moving project over to CC (2014.2)

I have just moved across a project from Premiere Pro CC to Premiere Pro CC (2014.2).
A notice popped up to say that the file had to be converted, after doing so, alot of the footage and sub clips are not actually what i have edited, it is from different times of the video?

thanks i appreciate the advice, however that's where the problem originally lies. After perhaps prematurely clearing to cache database to free up space before i had finished the project, it now get's stuck whilst trying to conform. This time it has got stuck whilst auto saving which i will now turn off, however i am worried i will have to wait a very long time untill all the video conform as this is a big project with a large number of video files.

Site "changed" when moved to server...

Similar Messages

Maybe you are looking for