Site Code for SCCM Clients installed from Secondary Site Server

Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normal

Ultimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

  • Manual Client Push from Secondary Site

    Setup:  SCCM2012R2
    One Primary Site > AD System Discovery Enabled
    One Secondary Site > no discovery methods configured
    IP boundaries are specified so that remote workstation(s) will use the Secondary as their MP.  Auto-install client option disabled for both primary and secondary sites.  Client install settings are set up identical for both site servers. (same
    user account and same sitecode)
    Issue:  When attempting to manually push the client install, it will not use the "specified" site server.
    Example:  Workstation was discovered using AD Discovery by primary site (since AD Discovery is not supported by a secondary site, or so it would appear).  The workstation IP is part of a boundary defined to belong to the secondary site.
    Settings selected in the manual client push:
    [X] Always install the client software
    [X] Install the client software from a specified site:
                Select -> "Secondary Site"
    The workstation never receives the ccm-install package.  Nothing appears in the ccm.log file on the Secondary Site server indicating install initialization.
    If I run the manual client push again, but this time I leave the box un-checked for "install client software from a specified site," the install runs from the primary site.  CCM.log file on the Primary site confirms installation, and the ccmsetup
    folder appears on the workstation immediately.
    It was my understanding, that a boundary would 'point' the workstation to the Secondary site for deployments, etc..  And even if that isn't true, I have specifically told it to install it from the Secondary Site.
    Other notes - the workstation receiving the client resides in the same remote office as the secondary site server.  Ideally, we want to limit WAN traffic.  I would like to avoid pushing the client across the WAN for several hundred clients.
    What am I missing here?  Why won't clients install from the secondary site, even when specifically set to do so?

    Very good information. Thank you for clarifying the reason they were listed with the secondary site code in the console.  It confused me - as it didn't line up with what I had read.
    At this time, I have about 40 'resources' with no site code. These don't fall in a boundary, but that will be fixed when I create/configure the proper boundaries.  The rest have a site code - most primary and others secondary, depending on their
    install status and boundary.  
    I gave the blog post a quick read, but I'll need to go back and read it again to soak in everything that was discussed.  Thank you for sharing that.  Believe it or not, I had stumbled upon your blog once before for something else (it looked familiar). 
    It is now bookmarked.
    And as I was typing this looking over everything, I found something new....
    I'm embarrassed to say that I found the Secondary site replication link was in an error state. Both sites were up - they just weren't talking.  The error was a couple days ago - when I started down this path.  Sadly, alert notification has
    not yet been configured.  I'm happy I found it - but I'm angry I wasted your efforts for a simple replication error.
    A quick reboot of the secondary server seems to have done the trick.  All of those queued up client pushes show up in the CCM.log now.  They began flooding in after the reboot.
    Thank you again for your patience and helpful responses.

  • SCCM Client Install Loop

    Hello,
    I am using SCCM 2012 R2 with CU3 and I identified an issue for some SCCM clients installed on 2012/2012R2 servers.
    The client keeps being resinstalled everyh 5/6 hours.
    I believe it's because of the ccm evaluation failing.
    I found could find the following infos :
    - The task sequence "Configuration Manager Maintenance" fails with the result "The last run of the task was terminated by the user. (0x41306)"
    - Error messages in the Winodws\CCM\Logs\CcmEval.log
    Fail to get integer from registry        CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Fail to get MPFailCount from registry, restart counting from 0     CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Client is set to use HTTPS when available. The current state is 448.    CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Client is set to use HTTPS when available. The current state is 448.    CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:58240AB1-F3B5-4FEA-ADDD-0C40D0F857D6";
     DateTime = "20150125091322.843000+000";
     HostName = "host.contoso.com";
     HRESULT = "0x00000000";
     ProcessID = 40384;
     StatusCode = 0;
     ThreadID = 29568;
     CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Client's current MP is http://host.contoso.com       CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    MP check succeeded          CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Send previous report if needed.         CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Fail to get time from registry         CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Can't determine whether previous sent succeed, assume sent failed    CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Fail to get string from registry        CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    There is no previous report sent        CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Fail to get time from registry         CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Can't determine whether previous sent succeed, assume sent failed    CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Previous send is not complete, need to send report this time.     CcmEval 1/25/2015 4:13:22 AM 29568 (0x7380)
    Begin to send client health status report       CcmEval 1/25/2015 4:13:23 AM 29568 (0x7380)
    Successfully sent client health status as a state message.     CcmEval 1/25/2015 4:13:23 AM 29568 (0x7380)
    ==========[ ccmeval finished normally in process 40384 ]==========================  CcmEval 1/25/2015 4:13:24 AM 29568 (0x7380)
    - I don't see any error messages in the ccmsetup-ccmeval.log
    - I see new events in the CLient.msi.log every 5/6 hours when the install restarts automatically.
      I also identified the MSIInstaller event in the event viewer.
    I used the client Push to install the client so I first deploy the version 5.00.7958.1000 then install the update CU3.
    I already tried to uninstall/reinstall the client but it's still the same.
    Please, let me know if you already experienced the same issue and found a solution.
    Thank you.

    couple of blogs on the same issue ...worth taking look at them
    https://social.technet.microsoft.com/Forums/en-US/b10db3de-38c0-44b4-a4a2-11c9d5999083/client-is-uninstalling-itself-every-5-hours?forum=configmanagerdeployment
    http://www.systemcentercentral.com/sccm-2012-r2-client-agent-uninstalling-and-installing-itself-every-5-hours/
    https://kickthatcomputer.wordpress.com/2015/01/13/configmgr-client-constantly-reinstalling-every-5-hours/#more-1772
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • Difference between two queries for no client installed

    I have created a collection for all discovered computers with no client installed using the following query:
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client is null
    If I go to Monitoring -> Client Status -> Client Activity and click on the link next to the pie chart for no clients installed I get a completely different result and they neither query contains the same computers as each other.
    Anyone know what the exact query the link in the monitoring section is using and why the results between the two are completely different?
    If would expect them to match up or at the very least that my first query should be the source of truth.

    If I use:
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client is null OR SMS_R_System.Client = 0
    and use the same limiting collection as the built in monitoring query  "All Desktop and Server Clients" I actually get 0 results from the query.  If I use "All Systems" as the limiting collection I still only get the same results
    that I do with out also querying for "equals 0" as well.
    I read one article that said that "equals 0" actually shows you the clients had the CCM client but it was uninstalled where "is Null" returns systems that never had the CCM client.
    I don't know if this is accurate but it doesn't explain why a built in monitoring query would return inaccurate results.  It only returns a fraction of the non-client systems that the above query returns and as mentioned, the systems returned in one
    are not included in the other.

  • Replication from secondary site to primary site

    When we want to replicate from secondary site to primary site then we can't use database replication. Why?

    Not sure what you mean... The replication between primary sites and secondary sites is using both database replication and file replication. See for more information:
    http://technet.microsoft.com/en-us/library/gg712701.aspx#Planning_for_Database_Replication
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Existing SCCM Client installed again after removing client or imaging

    Hello,
    I have a question on two different scenarios for SCCM client deployment.  Client Push and AD System Group Discovery is enabled.
    In both cases, I am trying to figure out if/how the SCCM client might get automatically re-installed.
    Scenario 1: An existing SCCM client has its client removed. Will it get re-installed?
    Scenario 2: An existing SCCM client gets re-imaged (no SCCM client on image) using the same name. Will the client be installed?
    Thanks
    Angelo
    Angelo

    Thanks for the quick response. We do use ConfigMgr to deploy images so my main question really revolves around CM reinstalling the client on existing machines where it was then removed.
    It looks like there is a way to do this by changing the items you mention in your response. I'm just not sure what it should be changed to in order to accomplish my goal.
    This link shed some light on the issue but I'm still unsure on what specific changes to make.
    http://technet.microsoft.com/en-us/library/e555d7e3-3681-440a-82d0-319d2b4bdd08#BKMK_PlanMaintenanceTasks
    Here are our settings as of now:
    Delete Aged Discovery Data - Enabled - 90 Days on Saturdays
    Clear Install Flag - Disabled
    Heartbeat Discovery - Enabled - 1 week
    Assuming the settings above, what would happen if a client was removed today?  Would it ever get reinstalled? Let's say I wanted to have the client reinstalled in approx. 2 days of removal?
    Thanks so much
    Angelo
    Assuming a client was removed today,
    Angelo

  • OSD failed from secondary site

    hi
    in my environment I have a primary and a secondary server ,pxe role  and WDS  enabled on both  location ,osd is working fine
    as for a test we have shutdown the primary server and tried OSD from Secondary site location we have found boot image was not loading and got error showing BCD error why this is happening even though images we available on secondary dp ,while looking smspxe
    .log found below error in secondary ,after bringing up primary osd working fine
    PXE::MP_LookupDevice failed; 0x80004005 SMSPXE 7/18/2014 1:02:36 PM 3996 (0x0F9C)
    reply has no message header marker SMSPXE 7/18/2014 1:02:57 PM 3992 (0x0F98)
    Failed to send status message (80004005) SMSPXE 7/18/2014 1:02:57 PM 3992 (0x0F98)
    Failed to send the status message SMSPXE 7/18/2014 1:02:57 PM 3992 (0x0F98)
    ankith

    That's default. Secondaries cannot operate autonomous.
    Torsten Meringer | http://www.mssccmfaq.de

  • Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have alr

    Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have already been used. So far it has only been 2 iPads. 
    Any solutions?

    The compiler is highlighting the areas you got wrong, although the error messages are somewhat confusing.
    Error 1: NSLog is a function and needs to be called as such, see e.g. the circleArea call on the line above. Functions are called using the function-name with its arguments in paratheses e.g. foo(12, 13).
    Error 2: looks like a typo, defining a function is done as function-name(... <arguments> ...) { ... <body> ...}. In your code there is a ";" between the arguments and the body that should not be there, you probably copy pasted it from the forward declaration at the top of the source codde file.

  • Code for reading particular  fields from the file placed in application

    hi,
    code for reading particular  fields from the file placed in application server in to the internal table.

    Hi,
    Use the GUI_UPLOAD FM to upload the File into ur Internal Table.
    DATA : FILE_TABLE TYPE FILE_TABLE OCCURS 0,
             fwa TYPE FILE_TABLE,
             FILENAME TYPE STRING,
             RC TYPE I.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
      EXPORTING
        WINDOW_TITLE            = 'Open File'
       DEFAULT_EXTENSION       =
       DEFAULT_FILENAME        =
       FILE_FILTER             =
       INITIAL_DIRECTORY       =
       MULTISELECTION          =
       WITH_ENCODING           =
      CHANGING
        FILE_TABLE              = FILE_TABLE
        RC                      = RC
       USER_ACTION             =
       FILE_ENCODING           =
      EXCEPTIONS
        FILE_OPEN_DIALOG_FAILED = 1
        CNTL_ERROR              = 2
        ERROR_NO_GUI            = 3
        NOT_SUPPORTED_BY_GUI    = 4
        others                  = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    READ TABLE FILE_TABLE INDEX 1 into fwa.
    FILENAME = fwa-FILENAME.
        CALL FUNCTION 'GUI_UPLOAD'
             EXPORTING
                  filename                = filename
                  FILETYPE                = 'DAT'
           IMPORTING
                FILELENGTH              =
             TABLES
                  data_tab                = itab
             EXCEPTIONS
                  file_open_error         = 1
                  file_read_error         = 2
                  no_batch                = 3
                  gui_refuse_filetransfer = 4
                  invalid_type            = 5
                  OTHERS                  = 6 .
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    Regards,
    Balakumar.G
    Reward Points if helpful.

  • How can I get "library components" for Encore? download from Adobe site is corrupted/missing files

    How can I get "library components" for Encore? download from Adobe site is corrupted/missing files.  I have tried 3 times to d/l and each time problems.  HELP please!
    I just want the DVD templates and buttons that would come with actual purchase of Encore.  Having creative cloud subscription should not limit this for me, right?
    BTW I have CC subscription, Windows 7,

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • Custom code for Target Source Reconciliation from a flat file

    Hi Experts,
    I need help in writing a custom code for Target Source Reconciliation from a flat file to OIM. The flat file will contain account details for different application instances. I am working on 11gr2.
    Thanks,
    Subin

    All right, all right, not so quickly.
    I am at the stage of trying to put one dimension
    array. But I stuck in one place, this is the program:
    import java.io.*;
    public class FromFile {
    public static void main(String[] args) throws IOException {
    File inputFile = new File("mac.txt");
    FileReader in = new FileReader(inputFile);
    int c;
    for(int i = 0; i < 10; i++) {
         c = in.read();
    System.out.println(c);
    and I try to read: 1 2 3 4 from text file
    This is the result so far...
    49
    32
    50
    32
    51
    32
    52
    -1
    -1
    -1
    well,
    I think I know what's wrong. I must change ASCII numbers into
    ints. But I dont' know how to do it. Some nice book, or
    tutorial on streams would come in handy. Could you correct
    it?.

  • Service Manager 2012R2 - Hotfix for Service Manager 2012 SP1 secondary Management server

    Can the hotfix for the issue described here -
    http://blogs.technet.com/b/servicemanager/archive/2013/04/22/service-manager-2012-sp1-secondary-management-server-cannot-set-availability-on-a-health-service-that-doesn-t-exist.aspx 
    , be applied to a 2012R2 Service Manager environment? 
    My dilemma; In a Service Manager 2012 SP1 environment, I installed a secondary mgmt server, promoted it, then upgraded to R2. This R2 Primary mgmt server has the error described in the TechNet blog. 
    The reason this was done, the original primary mgmt server (2012 SP1) resided on the same server as the Portal. This original primary is still at 2012 SP1 with the System Center services disabled.
    Again, can the hotfix for Service Manager 2012 SP1 secondary mgmt servers be applied to a Primary mgmt server (or environment, however the hotfix is run) server Service Manager 2012 R2? 
    Thank you,
    Brian VanDam
    BVAN in SoCol

    Hi,
    Hmm, you should probably log a case for this, but my first thought here would be to install a new SCSM 2012 R2 server and promote that one to the new Primary server, then remove the old ones.
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Transaction Code for seeing the files in the  Application Server

    Hello All,
      Can anybody please give me the transaction code for seeing the files in the Application Server
    Thanks in Advance,
    Regards,
    LIJO.

    hi
    good
    try with tcode AL11.
    thanks
    mrutyun^

  • Endpoint Protection clients no getting updates from SCCM 2012 in new Secondary Site

    I recently stood up a secondary site behind a PCI firewall to manage PCI in-scope systems. All of my boundaries are properly configured and there are no overlaps. I am able to push packages to these clients and the clients are reporting as healthy however
    I am not able to get updates to the SCEP clients. There is no internet access from these systems so I have to rely on updates from SCCM. From what I can see in the WindowsUpdate log it is only trying to go to Microsoft for the definitions. Here is the Log:
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: Send failed with hr = 80072ee2.
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: Send request failed, hr:0x80072ee2
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
    error 0x80072ee2
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-04-30 11:05:09:739
     828 da8
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-04-30 11:05:09:739
     828 da8
    SLS FATAL: GetResponse failed with hresult 0x80072ee2...
    2014-04-30 11:05:09:739
     828 da8
    EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
    2014-04-30 11:05:09:739
     828 da8
    EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
    2014-04-30 11:05:09:739
     828 da8
    EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
    2014-04-30 11:05:09:739
     828 da8
    Agent WARNING: Failed to obtain the authorization cab URL for service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0
    2014-04-30 11:05:09:739
     828 da8
    Agent FATAL: Caller <NULL> failed to opt in to service 7971f918-a847-4430-9279-4a52d1efe18d, hr=0X80072EE2
    2014-04-30 11:05:09:739
     828 da8
    SLS Retrieving SLS response from server...
    2014-04-30 11:05:09:739
     828 da8
    SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: Send failed with hr = 80072ee2.
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: Send request failed, hr:0x80072ee2
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422>.
    error 0x80072ee2
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-04-30 11:05:30:742
     828 da8
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-04-30 11:05:30:742
     828 da8
    SLS FATAL: GetResponse failed with hresult 0x80072ee2...
    2014-04-30 11:05:30:742
     828 da8
    EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
    2014-04-30 11:05:30:742
     828 da8
    EP FATAL: EP: CSLSEndpointProvider::GetSecondaryServicesEnabledState - Failed to get client data and init parser, error = 0x80072EE2
    2014-04-30 11:05:30:742
     828 da8
    Agent   * WARNING: Online service registration/service ID resolution failed, hr=0x80248014
    2014-04-30 11:05:30:742
     828 da8
    Agent   * WARNING: Exit code = 0x80248014
    2014-04-30 11:05:30:742
     828 da8
    Agent *********
    2014-04-30 11:05:30:742
     828 da8
    Agent **  END  **  Agent: Finding updates [CallerId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)  Id = 9]
    2014-04-30 11:05:30:742
     828 da8
    Agent *************
    2014-04-30 11:05:30:742
     828 da8
    Agent WARNING: WU client failed Searching for update with error 0x80248014
    2014-04-30 11:05:30:742
     828 da8
    IdleTmr WU operation (CSearchCall::Init ID 9, operation # 99) stopped; does use network; is not at background priority
    2014-04-30 11:05:30:742
     828 da8
    IdleTmr Decremented PDC RefCount for Network to 0
    2014-04-30 11:05:30:742
     828 da8
    IdleTmr Decremented idle timer priority operation counter to 0
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI >>--  RESUMED  -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI   - Updates found = 0
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI   - WARNING: Exit code = 0x00000000, Result code = 0x80248014
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI ---------
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI --  END  --  COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
    2014-04-30 11:05:30:743
     576 12c0
    COMAPI -------------
    2014-04-30 11:05:30:743
     576 1254
    COMAPI WARNING: Operation failed due to earlier error, hr=80248014
    2014-04-30 11:05:30:743
     576 1254
    COMAPI FATAL: Unable to complete asynchronous search. (hr=80248014)
    The log is from a Server 2012 R2 Client. The only thing I was able to find was this Article which did not resolve my issue. Anyone else encounter anything similar? Any help would be appreciated.
    Regards, Evan Mills - Systems Administrator

    Every two hours is too aggressive for the ADR. Definitions are only released 2-3 times a day so every 8 hours is what most consider best practice. Is your WSUS sync occurring every two hours as well? If not, then the ADR wouldn't have anything new to pick
    up anyway. It's best to set the WSUS sync for every 8 hours and then set the ADR to run after any successful WSUS sync.
    So the EP definitions are caching but not installing? What does the WUAHandler.log show? One of my machines shows the following which indicates a successful installation from the ConfigMgr delivered update:
    1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.933.0) (0a156122-d4f8-4215-9e63-8f0f1e32c9c6, 200)    WUAHandler    4/30/2014 6:49:33 AM    11080 (0x2B48)
    Async installation of updates started.    WUAHandler    4/30/2014 6:49:34 AM    11080 (0x2B48)
    Update 1 (0a156122-d4f8-4215-9e63-8f0f1e32c9c6) finished installing (0x00000000), Reboot Required? No    WUAHandler    4/30/2014 6:50:23 AM    8664 (0x21D8)
    Async install completed.    WUAHandler    4/30/2014 6:50:23 AM    8664 (0x21D8)
    Installation of updates completed.    WUAHandler    4/30/2014 6:50:23 AM    11032 (0x2B18)
    It sounds like if you set "Check for Endpoint Protection definitions at a specific interval" to 0 then it would prevent the WindowsUpdate.log activity you're seeing when the EP client tries to reach out for updates.

  • Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

    Hi All,
    What is best practice for automatic installing of SCCM 2012 client Patches
    (using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
    I need information for:
    OSD
    Client Push Installation
    Thank you in advance.
    Regards,

    Not everything that can be or is supported or not supported is documented (or ever can be):
    http://technet.microsoft.com/en-us/magazine/jj643252.aspx
    Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
    For clientpatch, here's the specific documentation noting it as unsupported:
    http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
    Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
    What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
    know that at least those exist and probably more since it is, as mentioned, abandoned code.
    Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
    that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
    Jason | http://blog.configmgrftw.com

Maybe you are looking for

  • Mini DVI port

    Please, Recently I have noticed that the mini dvi port of my MacBook shows some gold metal parts absent. Is it normal or should it be repaired/fixed? Because nobody has a macbook here, I do not have how to make a comparison. I made an schematic posit

  • Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

    Hello All, I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48. i have run transaction SAINT imported all PAT and ATT files and started the process. now after running around 16 Hrs it is throwing error

  • Has the IOS update on my Ipod caused the Apple TV Remote App to have connection problems?

    I recently updated the software on my IPod Touch and now the Apple TV Remote App won't connect to the Apple TV.  Home Sharing is turned on for both my computer and Ipod.  ITunes and the IPod have both been updated.  Is there an issue with the new sof

  • Sales standard analysis and debit memo

    Hi colleagues, In case when I create debit memo regarding an invoice in standard analysis, I get wrong billing qty. For example when I start MC+E and I sold and billed 100PC of material X which is 1.000,00$ in MC+E I get Gross Sales 1.000,00$ and Bil

  • Using "save as" in Adobe Reader to save a PDF document in Alfresco

    Is it possible to use the "save as" option in Adobe Reader to save a PDF file directly in Alfresco?