Site definition doesn't appear

Hi all,
I create Site Definition project, after several changes on onet.xml and web*.xml then debugging, suddenly my site template doesn't appear on create site template, does anybody know about this issue?

Hi
Have you deployed the template through Sandbox solution or Farm Solution.
Please check the url onec.
http://praveenbattula.blogspot.in/2010/02/sharepoint-2010-site-templates-not.html
Thanks,
Santanu

Similar Messages

Any page loads but the site content doesn't appear on main screen, only on tabs list.

I got an ARMv6 - Galaxy Spica (GT-I5700) mobile, with Android 2.3.7 on it. When I try to access any webpage its content, after loaded, is blank. Although I do visualise the site content on Tabs list or Top sites (first page) .
It happens even on Beta, Aurora or Nightly builds.
I did try to clean all data, but hasn't change anything.

bugzilla.mozilla.org

Site List doesn't appear to work properly?

I have an MSI application that is set to FORCE CACHE as well as FORCE
RUN
I'm using a MACRO to specify the UNC path for the files (common ->
sources as well as the transforms).
I have two app objects (two copies, really). One in our main site,
another in a remote site.
The GUIDs have been synced
I setup the "site list" as per the docs (pointed "remote site app" to
the "main site app")
I have my Novell Client 4.91 SP2 using IP Address costing =2 (ping
time).
When I login as the "remote" user, it tries to cache the application.
Only 51 minutes remaining (should be 5 minutes as I'm on the "main" site
subnet and the ping should've responded the quickest from here).
Am I doing something wrong?

In article <[email protected]>,
[email protected] says...
> I have an MSI application that is set to FORCE CACHE as well as FORCE
> RUN
>
> I'm using a MACRO to specify the UNC path for the files (common ->
> sources as well as the transforms).
>
> I have two app objects (two copies, really). One in our main site,
> another in a remote site.
>
> The GUIDs have been synced
>
> I setup the "site list" as per the docs (pointed "remote site app" to
> the "main site app")
>
> I have my Novell Client 4.91 SP2 using IP Address costing =2 (ping
> time).
>
> When I login as the "remote" user, it tries to cache the application.
> Only 51 minutes remaining (should be 5 minutes as I'm on the "main" site
> subnet and the ping should've responded the quickest from here).
>
> Am I doing something wrong?
>
I'm doing something wrong. I guess it only works with NON-Cached apps
that are distributed.

I just updated to Firefox 4 and my Roboform toolbar disappeared. Following the instructions on your site and Roboform's site did not help. It doesn't appear in the Customize Toolbar window nor in the Extensions list. How can I get it back?

I followed the instructions on your site and Roboform's site, but Roboform doesn't appear in the Customize Toolbar window nor does it appear in the Extensions list. How can I get the Roboform Toolbar back?

Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

Site doesn't appear in iWeb

I've transferred an iweb site from one computer to another via dropbox. I've put it in library/application support/iweb, where it shows up, but it doesn't appear in iWeb when I try to work on it. Any idea why not?

Delete the iWeb preference file from your Home/Library/Preferences folder and then try launching iWeb again. It will look in your Users/Home/Library/Application Support/iWeb folder folder by default for the domain file to open. Deleting the preference file resets location to the default.
If that doesn't work you can use the following script provided by Cyclosaurus that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Show a WebPart view in a visual studio site definition

Hi Guys ,
i developed a Site definition in VS. In this Definition i have a list instance based on Promoted link template (type 170).Now i want to show in the Deafault.aspx a view of the promoted link but when i put the snipet
<WebPartPages:WebPartZone runat="server" FrameType="TitleBarOnly" ID="full" Title="loc:full">
<WebPartPages:XsltListViewWebPart runat="server"
ListUrl="Lists/List1"
IsIncluded="True"
JsLink="clientTemplate.js"
NoDefaultStyle="TRUE"
PageType="PAGE_NORMALVIEW"
Default="False"
ViewContentTypeId="0x">
</WebPartPages:XsltListViewWebPart>
</WebPartPages:WebPartZone>
the server respond me : ..Type 'Microsoft.SharePoint.WebPartPages.WebPartZone' does not have a public
property named 'XsltListViewWebPart'. I added
<%
@RegisterTagprefix="WebPartPages"Namespace="Microsoft.SharePoint.WebPartPages"Assembly="Microsoft.SharePoint,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>
but it doesn´t work..
Any suggestion?

Hi gohberto,
Before <WebPartPages:XsltListViewWebPart> tag,you can add <zoneTemplate>
Here is a code snippet for your reference:
<WebPartPages:WebPartZone runat="server" FrameType="None" ID="Main" Title="loc:Main">
<ZoneTemplate>
<WebPartPages:XsltListViewWebPart runat="server" ListUrl="Lists/My List" [abbreviated...]>
<XmlDefinition>
<View Name="Some View" Type="HTML" Hidden="TRUE" TabularView="FALSE" DisplayName="" Url="View.aspx" Level="255" BaseViewID="1" ContentTypeID="0x" ImageUrl="/_layouts/images/generic.png">
<Query>
<OrderBy>
<FieldRef Ascending="FALSE" Name="ID"/>
</OrderBy>
</Query>
<ViewFields>
<FieldRef Name="ID"/>
</ViewFields>
<RowLimit Paged="TRUE">1</RowLimit>
<Aggregations Value="Off"/>
<Toolbar Type="Standard"/>
</View>
</XmlDefinition>
<DataFields>
</DataFields>
</WebPartPages:XsltListViewWebPart>
</ZoneTemplate>
</WebPartPages:WebPartZone>
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/7740935e-d4d7-46f8-9dac-09b9c46855c6/type-microsoftsharepointwebpartpageswebpartzone-does-not-have-a-public-property-named-webpart?forum=sharepointcustomizationlegacy
Best Reagrds
Zhengyu Guo
TechNet Community Support

Create a Site Definition file with Visual Web part in Visual Studio

I tried to create a site definition file in Visual Studio 2013 and SharePoint 2013 by following the MSDN tutorial:
Walkthrough: Create a Basic Site Definition Project. Near the end, I added a virtual web part control to the site definition and registered MyWebPartControls in the site definition's default ASPX page as written in the MSDN tutorial:
Unfortunately, IntelliSense doesn't show any MyWebPartControls: tags, and VisualWebPart1 is highlighted with a warning “Element 'SMWebPart3' is not a known element. This can
occur if there is a compilation error in the Web site, or the web.config file is missing.”
Since it’s a warning, I went ahead to build and deploy the solution. However, when I used the site definition template to create a subsite, it returned a parser error:
Unknown server tag 'MyWebPartControls:TestSiteDef1.VisualWebPart1'
I spent half day researching and debugging, and finally solved the problem. The issue is on the registration line:
<%@ Register Tagprefix="MyWebPartControls" Namespace="TestSiteDef.VisualWebPart1" Assembly="$SharePoint.Project.AssemblyFullName$" %>
The $SharePoint.Project.AssemblyFullName$ is a replaceable parameter to provide values for SharePoint solution items whose actual values are not known at design time. Unfortunately, it does not find the right assembly name during the deployment. It should
be replaced by the Assembly’s Strong Name. Here is how I fixed the problem step by step:
In Solution Explorer, open the package node and double click Package.package
Click Manifest tab in the Package.package.
Copy the full assembly name in the package’s manifest. It may be similar like this:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Back to the site definition’s default.aspx page, replace the
Assembly="$SharePoint.Project.AssemblyFullName"
in the registration line with the copied text:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Change the Namespace from
Namespace="TestSiteDef.VisualWebPart1"
to
Namespace="TestSiteDef".
The line to register the web part in a site definition file will look like this:
<%@
Register
Tagprefix="MyWebPartControls"
Namespace="TestSiteDef "
Assembly="TestSiteDef, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
%>
Clean, build and deploy the solution. It works like charm. (Note: the warning message on visual web part may still exist, but you can ignore it).

Assuming your .ascx.vb file is inheriting from the web part class, you can add the custom properties in the same manor (language syntax aside).
Be sure to use the attributes to correctly identify and scope the properties. (see:
http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Attributes_for_Web_Part_properties)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com

Report parameters doesn't appear correctly

I have a report .rdl under Visual Studio2010 and sql server2008.
the report language is arabic and all the fields appears correctly, but the parameters doesn't appear correct it shows stange characers(not question marks) and all the remaining fields show arabic characters correct.
i run the report on internet explorer9.
i don't know what is the problem, i searched alot and there is nothing new. what can i do??

Hi nermo,
You have mentioned that the report is work fine on Chrome. It may be a compatibility issue of IE9. At this time, I suggest that you first check this issue in IE9 Compatibility View mode. Please refer to the following steps:
1. Launch the IE 9, and press Alt+T to select the Tools.
2. Click Compatibility View settings.
3. Check the “Display intranet sites in Compatibility View” option, and click Close.
Reference:
Fix site display problems with Compatibility View
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Keyboard doesn't appear in Messages+ on HTC M8

My keyboard doesn't appear when I try to type a message in Messages+. It appears when I type in the to box. Instead of the keyboard I have a box lets you send gifts, photos, audio, etc. I've tried restarting numerous times with no effect. Has anyone else had this issue? I like the verizon messaging app and don't want to use another, if possible.

shelsuz23,
You've come to the right place for help! Being able to use the keyboard while in the message + app is definitely important.
When did this issue start? Do you have the most current software version running on the phone http://www.verizonwireless.com/support/knowledge-base-95738/? Have you checked that the Verizon Messages+ application is updated to version 5.5.17 or later. Please go to the Google Playstore and update the Verizon Messages+ application and retest.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Fireworks submenu doesn't appear in windows 8 phones

fireworks submenu doesn't appear in windows 8 phones but works on everything else, as far as i know. any solutions?

thanks, it was my clients phone but i tried it on another phone and it worked but it's a bit tricky... you sort of have to press it just right or it disappears. anyway, i did an alternate site without the submenus for phones.

Js submenu doesn't appear in windows 8 phones

js submenu doesn't appear in windows 8 phones but works on iphone. any solution?

thanks, it was my clients phone but i tried it on another phone and it worked but it's a bit tricky... you sort of have to press it just right or it disappears. anyway, i did an alternate site without the submenus for phones.

I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

if you created a ringtone, it should appear in the tone menu in itunes.
Is the ringtone 30 seconds or less?
Also I would check the iringer support site to resolve your issue.

Import dialog doesn't appear (OS X)

When I connect my SanDisk Firewire memory card reader to my Mac Pro, Lightroom doesn't open and the import dialog doesn't appear. This worked fine on my previous G5. iPhoto isn't opening either... nothing happens at all when I plug in the reader.

Chris, you may have already done this, but be sure to check 'Show Import Dialog when a Memory card is detected' under Import in LR PReferences, as well.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

Backing up Site Definitions in Ultradev 1.0

I'm finally going to upgrade, but I have a lot of Site
Definitions in Dreamweaver Ultradev 1.0.
Is there a way to backup and transfer Site Definitions from
Ultradev 1.0 to the latest Dreamweaver on a new PC?
I did find a few utilities but none that support backing up
from the old Ultradev 1.0 version.

Good idea....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tom Muck" <[email protected]> wrote in
message
news:[email protected]...
> Or export them one by one if it doesn't work and
reimport them. You can
> multiple-select site definitions when importing.
>
> --
> --
> Tom Muck, Adobe Community Expert
> Dreamweaver Extensions/Articles --
http://www.tom-muck.com/
> Cartweaver Development Team -
http://www.cartweaver.com/
> Extending Knowledge Daily -
http://www.communitymx.com/
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> You're hosed, I believe, unfortunately. Even the
best of the utilities
>> available doesn't dig that deep -
>>
>> MM-Exporter recognizes installed versions of
Dreamweaver® 3, 4, UD4, MX,
>> MX 2004 and DW8 under Windows and saves selectively:
>>
>> (taken from
http://mm-exporter.joexx.de)
>>
>> But, since it's free, you could get it and try it.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Soporose" <[email protected]>
wrote in message
>> news:[email protected]...
>>> I'm finally going to upgrade, but I have a lot
of Site Definitions in
>>> Dreamweaver Ultradev 1.0.
>>>
>>> Is there a way to backup and transfer Site
Definitions from Ultradev 1.0
>>> to
>>> the latest Dreamweaver on a new PC?
>>>
>>> I did find a few utilities but none that support
backing up from the old
>>> Ultradev 1.0 version.
>>>
>>
>>
>
>

HT201318 Hello. I have just built a website using iWeb but cannot upload it. I curently have the 25gb account. There doesn't appear to be any facility here for the net. ASm I correct in thinking I need an upgrade, or am I doing something wrong? Thanks

Hello. I have just built a website using iWeb but cannot upload it. I curently have the 25gb account. There doesn't appear to be any facility here for the net. Am I correct in thinking I need an upgrade, or am I doing something wrong? Thanks

iCloud does not provide website hosting. You will need to find another website hosting service - there are many to choose from - and upload your site there. How you do this depends on what version of iWeb you have.
In order to upload your existing site in iWeb '09 and above:
Click on the name of the site in the sidebar: the publishing settings pane will open. Set 'Publish to' to 'FTP'. Enter the name of the site and a contact address (if desired).
In the 'FTP Server Settings' section you will need to know the server address (your hosting service can tell you that), and your username and password for that service. Your site will be published in a folder with its name at root level of the server, with an index.html file at root level (which will overwrite any index.html file which may be there already). The 'Directory/Path' field may need to include a path such as '/webspace/' or 'ht_docs/' - this is dependent on your hosting service and they should tell you this. If you want to publish within a folder you can add that to the path.
You can then click the 'Test connection' button so that iWeb can check that it can get access to your server space. You should enter the URL of the site in the 'URL' field so that rss feeds and internal links have the correct address.
To publish using an earlier version of iWeb:
From the File menu choose 'Publish to a folder'. You should create a folder somewhere convenient specifically for this and choose it when publishing to a folder: this folder should not contain anything else.
You now need an FTP program (FTP is the 'protocol' used for uploading) to upload the contents of the folder to your server.Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service. You can drag the contents of your folder to your webspace, or create a folder there and drag the contents to that if you prefer.
Some facilities that iWeb provided when hosted on MobileMe will not work on other servers: comments on weblogs and photos, password-protecting your site (some hosts may provide this), searching in the weblog, and a hits counter (again, some hosts can provide code for this). Slideshows in iWeb will work on other hosts than MobileMe (they use different code when FTPing which doesn't depend on scripts hosted on MobileMe as the MobileMe version does); however there is an issue with the 'buttons' which control the slideshow which are images hosted on me.com - these depend on images which used to be hosted on MobileMe. The poster 'Old Toad' on the Apple Forums has provided a workaround, described at http://oldtoadstutorials.net/No.26.html.

Site definition doesn't appear

Similar Messages

Maybe you are looking for